Getting an Error while trying to Approve Requisition in SAP Fiori PR Approval App
Hi Experts,
We have followed all the instructions given in the installation/configuration of SAP Fiori PR APPROVAL APP. While approving the PR from Lunchpad we are getting the following error.
ERROR :"RFC Error : Internal program error; (SAPMSSY1 ZCL_IM_ME_PROCESS_REQ_CTSD====CP 1 CBRC_EXIT_47_PURREQ)"
2) I have put a debugger in the USER_EXIT : "CBRC_EXIT_47_PURREQ" and checked that the value of SY_UCOM is initial and when i store the value "MESAVE" and run through debugging i am able to approve the PR. I want to get rid of this Debugging mode and run the PR APP from Launchpad properly without error.
Attached are the three screenshots for more referenece.
Kindly help me with the same.
Thanks & Regards:
AZhar
Am i getting this Error for the below reason?..
Because i am also getting the Same Error as the error in the below post.
POST "Fiori - Approve Purchase Requisition Error"
Please find the attached error screenshot and confirm.
Thanks & Regards:
Azhar
Similar Messages
-
I keep getting an error while trying to reinstall itunes?
I am trying to reinstall itunes and i am having an issue. I keep getting an error while trying to install and I keep getting very far but I always seem to end up with this.
"Could not open key
UNKNOWN\Components\DA42BC89BF25F5BD0AF…
\b25099274a207264182f8181add555d0.
Verify that you have sufficient access to that key, or contact your support personnel"
I was attempting to reinstall due to an error message appearing when I opened itunes
"Itunes requires a newer version of Apple Mobile Device Support Please uninstall
both Apple Mobile Device Support and iTunes, then install iTunes again."
I have tried a few solutions and for the first error when installing one was an attempt at editing a registry file which I do not think succeeded because I am running windows 8 and was being directed for windows 7."Could not open key
UNKNOWN\Components\DA42BC89BF25F5BD0AF…
\b25099274a207264182f8181add555d0.
Doublechecking. Have you tried the following user tip?
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows -
Getting ActionScript Error while trying to use Preloaders
Hi,
I am new to the Flex.Now we are using Flex 3 in our project.I
need to create custom Progress Bar, for this i got some reference
examples using preloader, by googling.But i am getting the error
while trying this.
The stack trace of the error is as follows:
Error: No class registered for interface
'mx.managers::ILayoutManager'.
at
mx.core::Singleton$/getInstance()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\core\ Singleton.as:111]
at
mx.core::Application()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\core\Application .as:273]
at
preloader::CustomPreloader()[D:\meena\flexworkspace\src\preloader\CustomPreloader.mxml:0]
at
mx.preloaders::Preloader/initialize()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\p reloaders\Preloader.as:210]
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::initialize()[E:\dev\3.0.x\frameworks\projects\ framework\src\mx\managers\SystemManager.as:1508
at
mx.managers::SystemManager/initHandler()[E:\dev\3.0.x\frameworks\projects\framework\src\m x\managers\SystemManager.as:2196]
Please can anyone help.............Hi,
I am new to the Flex.Now we are using Flex 3 in our project.I
need to create custom Progress Bar, for this i got some reference
examples using preloader, by googling.But i am getting the error
while trying this.
The stack trace of the error is as follows:
Error: No class registered for interface
'mx.managers::ILayoutManager'.
at
mx.core::Singleton$/getInstance()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\core\ Singleton.as:111]
at
mx.core::Application()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\core\Application .as:273]
at
preloader::CustomPreloader()[D:\meena\flexworkspace\src\preloader\CustomPreloader.mxml:0]
at
mx.preloaders::Preloader/initialize()[E:\dev\3.0.x\frameworks\projects\framework\src\mx\p reloaders\Preloader.as:210]
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::initialize()[E:\dev\3.0.x\frameworks\projects\ framework\src\mx\managers\SystemManager.as:1508
at
mx.managers::SystemManager/initHandler()[E:\dev\3.0.x\frameworks\projects\framework\src\m x\managers\SystemManager.as:2196]
Please can anyone help............. -
Hi, Getting an error while trying to download updates. Err Msg "Account Not in this store' Your account is not valis for use in the US store. You must switch store before purchasing' Have tried to change the store bu not successful. kindly advice
http://support.apple.com/kb/HT1311
-
I keep getting an error while trying to access the service
I keep getting an error while trying to access the service
Can you try to use ExportPDF directly on the website https://cloud.acrobat.com/exportpdf
[topic moved to ExportPDF forum] -
I keep getting network error while trying to download itunes
i keep getting network error while trying to download itunes
Hey temuera,
Thanks for the question. I understand you are experiencing issues downloading and installing iTunes for Windows. Along with the following article, you may want to attempt downloading with an alternate browser:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Getting socket error while trying to get oracle connection using JDBC
hi,
I am getting following socket read error while trying to get database connection using JDBC. This happening with jdk1.5.0_12 version with Oracle 9i
following is the stacktrace...
Thread t@92: (state = IN_NATIVE)
- java.net.SocketInputStream.socketRead0(java.io.FileDescriptor, byte[], int, int, int) @bci=0 (Compiled frame; information may be imprecise)
- java.net.SocketInputStream.read(byte[], int, int) @bci=84, line=129 (Compiled frame)
- oracle.net.ns.Packet.receive() @bci=31 (Compiled frame)
- oracle.net.ns.DataPacket.receive() @bci=1 (Interpreted frame)
- oracle.net.ns.NetInputStream.getNextPacket() @bci=48 (Compiled frame)
- oracle.jdbc.driver.T4CMAREngine.unmarshalSB1() @bci=1, line=1070 (Compiled frame)
- oracle.jdbc.driver.T4CStatement.doOall8(boolean, boolean, boolean, boolean) @bci=617, line=207 (Compiled frame)
- oracle.jdbc.driver.T4CStatement.executeForDescribe() @bci=39, line=790 (Compiled frame)
- oracle.jdbc.driver.OracleStatement.executeMaybeDescribe() @bci=106, line=1039 (Interpreted frame)
- oracle.jdbc.driver.T4CStatement.executeMaybeDescribe() @bci=11, line=830 (Interpreted frame)
- oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout() @bci=128, line=1132 (Interpreted frame)
- oracle.jdbc.driver.OracleStatement.executeQuery(java.lang.String) @bci=76, line=1272 (Interpreted frame)
any help would appreciated. thanks in advanceI do not have exact exception message.
additionally, i have got following the tomcat log file:
INFO - Resource pool cleanup thread just woke up.
Nov 1, 2008 3:41:52 AM org.apache.tomcat.util.threads.ThreadPool logFull
SEVERE: All threads (100) are currently busy, waiting. Increase maxThreads (100) or check the servlet status
INFO - Resource pool cleanup thread just woke up.
thanks in advance -
This is the error I get:
Problem Event Name:
BEX
Application Name:
iTunes.exe
Application Version:
11.1.3.8Hey there kmliby,
It sounds like you are getting an error message when trying to open iTunes. Depending on the version of your Windows version, I recommend either of these 2 articles to help resolve launch issues.
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1421
Or
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Getting an error while trying to use AJAX servlet in EP
Hi All,
This is my first time trying to develop a PAR file using AJAX. I have a project called NonEmployee and in it there is a class called NonEmployeeHiring which extends AbstractPortalComponent. I am trying to use AJAX, so that when users select a position from a drop down on the JSP, it send the request to a servlet called PositionDetailServlet, which does the processing and sens response back. However, I am getting a very weird error back in the response from servlet. Seems like it does not make upto the servlet and a part of the error that i am getting says,
No security zone - access is denied
com.sap.portal.system/applications/NonEmployee/components/PositionDetailServlet
This is only a part of the big page of error. My servlet is in src.core folder. Here is my portalapp.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<application>
<application-config>
<property name="startup" value="true"/>
<property name="ServicesReference" value="com.sap.portal.ivs.iviewservice,com.sap.portal.ivs.connectorservice,com.sap.portal.runtime.system.inqmy,com.sap.portal.pcd.glservice,com.sap.portal.ivs.systemlandscapeservice,com.sap.portal.pcmbuilderservice,usermanagement,com.sap.portal.ivs.logger,com.sap.portal.usermapping,landscape,jcoclient"/>
<property name="SharingReference" value="urlgenerator"/>
</application-config>
<application-config>
<property name="SharingReference" value="urlgenerator"/>
</application-config>
<components>
<component name="NonEmployeeHiring">
<component-config>
<property name="ClassName" value="NonEmployeeHiring"/>
<property name="SecurityZone" value="low_safety"/>
</component-config>
<component-profile>
<property name="SystemIdentifier" value="SAP_R3_HumanResources"/>
<property name="groupSubGroupForSalTypeValidation" value="A,01,AS,A,02,AS,A,03,HR,A,04,AS,A,05,HR,A,06,HR,A,07,HR,B,03,HR,B,04,AS,B,05,HR,B,06,HR,B,07,HR"/>
</component-profile>
</component>
<component name="PositionDetailServlet">
<component-config>
<property name="ClassName" value="com.grainger.portal.servlets.PositionDetailServlet"/>
<property name="ComponentType" value="servlet"/>
</component-config>
</component> </components>
<services/>
</application>
Any help will be greatly appreciated.
Thanks in advance,
PreetThanks a lot for replying and trying to help me guys. Here is what my new portalapp.xml looks like
<?xml version="1.0" encoding="ISO-8859-1"?>
<application>
<application-config>
<property name="startup" value="true"/>
<property name="ServicesReference" value="com.sap.portal.ivs.iviewservice,com.sap.portal.ivs.connectorservice,com.sap.portal.runtime.system.inqmy,com.sap.portal.pcd.glservice,com.sap.portal.ivs.systemlandscapeservice,com.sap.portal.pcmbuilderservice,usermanagement,com.sap.portal.ivs.logger,com.sap.portal.usermapping,landscape,jcoclient"/>
<property name="SharingReference" value="urlgenerator"/>
</application-config>
<application-config>
<property name="SharingReference" value="urlgenerator"/>
</application-config>
<components>
<component name="NonEmployeeHiring">
<component-config>
<property name="ClassName" value="NonEmployeeHiring"/>
<property name="SecurityZone" value="com.sap.portal.pdk/low_safety"/>
</component-config>
<component-profile>
<property name="SystemIdentifier" value="SAP_R3_HumanResources"/>
<property name="groupSubGroupForSalTypeValidation" value="A,01,AS,A,02,AS,A,03,HR,A,04,AS,A,05,HR,A,06,HR,A,07,HR,B,03,HR,B,04,AS,B,05,HR,B,06,HR,B,07,HR"/>
</component-profile>
</component>
<component name="PositionDetailServlet">
<component-config>
<property name="ClassName" value="com.grainger.portal.servlets.PositionDetailServlet"/>
<property name="SecurityZone" value="com.sap.portal.pdk/low_safety"/>
<property name="ComponentType" value="servlet"/>
</component-config>
</component>
<component name="PositionDetailServlet1">
<component-config>
<property name="ClassName" value="com.grainger.portal.servlets.PositionDetailServlet1"/>
<property name="SecurityZone" value="com.sap.portal.pdk/low_safety"/>
<property name="ComponentType" value="servlet"/>
</component-config>
</component>
</components>
<services/>
</application>
I created a new servlet called PositionDetailServlet1 and put it in src.api folder, thinking that that might help. But no luck at all. I am wondering if tehre is a global setting on the server for it to allow servlets to run. Just my guess.
Any help will be greatly appreciated. That is no issue.
Thanks,
Preet -
HT203175 Why am I getting an Error while trying to install itunes
After a recent itunes update I started getting an error about other software interferring with itunes (I had not installed any other software) I was told to try reinstall itunes.
When I try to reinstall itunes I get an error that says "The feature you are trying to use is a network resource that is unavailable" I also get this eroor message if I try to uninstall itunes.
I am not on a network! I never have been! This is just my Home use PC laptop.
Everything else on this computer seems to be working fine.
So now I have no itunes on my PC laptop at all.
Does anyone have any idea whats going on or how to fix this problem?
Thanks
RonWhen I try to reinstall itunes I get an error that says "The feature you are trying to use is a network resource that is unavailable" I also get this eroor message if I try to uninstall itunes.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I am getting an error while trying to intall Panther
G4 lost it's HD so I decided to simply get a new one install it and take the bad one out. It turns out that the original HD had been replaced by a SCSI Cheetah drive that no longer worked. Easy enough took the SCSI HD out the SCSI controller card out and replaced the HD with an ATA drive with more capacity. Drive partitions normal, no problem, but when I try to install OS X 10.3.0 (Panther) on it, I keep getting an error. So I play around with the dip switches and change it from "Cable Select" mode to "Master", still get the error. So I take the dip switch out completely still get the error. What is going on? My take it maybe a bad RAM chip that is not allowing the install to proceed.
Cristian, welcome to Apple Discussions.
Did you update the G4's firmware to 4.2.8 (Boot ROM version in Apple System Profiler).
See Mac OS X: Available firmware updates
http://docs.info.apple.com/article.html?artnum=86117
You need OS 9 to install the firmware. Before you upgrade the firmware, suggest you download/run DIMM First Aid - Check & recover disabled (missing) RAM from Apple's latest
firmware updates http://www.versiontracker.com/moreinfo.fcgi?id=10415
Cheers, Tom -
I am getting this Error while trying to open the Open Document Syntax
SYNTAX
="<a href=\"http://<MyServerIP>:8080/BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp?sDocType=wid&sDocName=59813204&sWindow=New&sRefresh=Y&lsSParameter="URLEncode(""[Parameter])"\" title=\"\" target=\"_self\" nav=\"web\">"[Parameter]+"</a>"
ERROR
HTTP Status 404 - /BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp
type Status report
message /BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp
description The requested resource (/BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp) is not available.
Apache Tomcat/5.0.27
Edited by: Aravindpune on Oct 18, 2010 7:31 PMI am using open document syntax.
At the time of giving the syntax it's not showing any errors.
while clicking on that Hyperlink it's showing this error
when i enter the entire link in the browser also it's giving same error.
HTTP Status 404 - /BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp
type Status report
message /BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp
description The requested resource (/BUSINESSOBJECTS/ENTERPRISE115/INFOVIEW/OpenDocument/opendoc/openDocument.jsp) is not available.
Apache Tomcat/5.0.27
I am using XI R2. -
Getting strange error while trying to search for missing VIs
So when I load the top-level VI, many of the subVIs have changed location, but they are all below the top level VI, and I have <topvi>/* set as my first search option so it should find them no problem. But during loadin I keep getting this error message:
I press okay for how many ever times I need to, then there are mannny errors. All the errors pertain to it not being able to find a "valid type def".
What is the deal with that error message, and why can't it find valid type defs, they are all there, they have moved but they are within the configured search paths.
Thanks for any helpI think I figured out whats going on here. The VIs actually weren't in directories below the topvi, so that explains why it couldn't find them. And the error message I think is becasue the next search path on the list after <topvi> and <topvi>\* is <foundvi> and <foundvi>\* but this found vi paths only get populated when you show LabVIEW where to look for a missing VI. Since, there was no opportunity to show LabVIEW where a missing VI was, the found vi paths were nonexistent. I believe that this is what caused the errror message. There should be some error checking implemented here within labview if no found vi paths exist.... Maybe this is already in future versions, still useing 8.5...
-
HT1222 What if I keep getting an error while trying to update?
I keep getting an error toward the end of the update. I'm not sure what I'm doing wrong
Hi there Isacas,
You may find the troubleshooting steps in the article below helpful.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
-Griff W. -
Keep getting an error while trying to sync
so I got a new Nano 16 GB, very slick device, love the interface and the radio. So the problem I'm having is I go to sync up the Nano, to update the playlist and such, but I keep getting an unknown error (13019) and the only way to fix it is to do a total restore. I've had to do this every time I try to sync up my nano. My computer is a PowerBook G4 running OS 10.5.8 and I'm running iTunes 10.
Have you tried syncing just one song? Perhaps you have some corrupt music in your iTunes library? Try unchecking the sync music box, apply, and then just add one song to see if it works.
This article says - update your version... sounds like you have done that but double check.
http://support.apple.com/kb/TS2830
-John
Maybe you are looking for
-
I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?
-
this problem with audio began yesterday but before that it was fine! this is a brand new macbook pro...not even a week old!
-
I have a Ipod touch 4th generation. The screen is locked and is showing Ipod is disabled. Try again in 22,499,536 minutes. How do I fix this???
-
Hi, I am a new user of labview and I have a problem with my VI, I am trying to plot random data in two xy graphs, in the first graph I plot current time vs random data (between 0 and 1), and in the second samples vs random data. In my first graph all
-
Make keyboard appear on iOS app launch
I've made an app in xcode for the iPad and would like the keyboard to appear automatically on launch. Is there a way to do this? Thanks!