Getting an odd bounce message

Yesterday I began to get the identical bounce message no matter who I sent an email to. I even tried it on a two other personal accounts that I control and got the same message. Is anyone else seeing it? Is it real or random? The emails are being received despite the bounce message. My isp is Road Runner and they were sent from my me.com address.
Your message cannot be delivered to the following recipients:
Recipient address: REDACTED FOR PRIVACY
Reason: Rejection greeting returned by server.
Diagnostic code: smtp;554-mailmx.sarcom.com Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means.
Remote system: dns;mailmx.sarcom.com (TCP|17.158.161.5|35159|208.65.135.12|25) (mailmx.sarcom.com)
Original-envelope-id: [email protected]
Reporting-MTA: dns;nk11p00mm-asmtp006.mac.com (tcp-daemon)
Arrival-date: Mon, 18 Mar 2013 02:56:07 +0000 (GMT)

Diagnostic code: smtp;554-p3pismtp01-052.prod.phx3.secureserver.net Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means.
Remote system: dns;smtp.secureserver.net (TCP|17.172.81.0|46952|72.167.238.201|25) (p3pismtp01-052.prod.phx3.secureserver.net)
and
Reason: Rejection greeting returned by server.
Diagnostic code: smtp;554 p3plibsmtp01-05.prod.phx3.secureserver.net bizsmtp Connection refused. IB111
Remote system: dns;smtp.secureserver.net (TCP|17.172.81.3|52528|72.167.238.29|25) (p3plibsmtp01-05.prod.phx3.secureserver.net bizsmtp Connection refused. IB111)
Same message same recipient, two different rejections minutes apart.

Similar Messages

Get an odd error message submitting half-day vacations

Hi,
I've written a web interface tool (php+saprfc) where employees can request vacation dates. Once the request is committed, the entry is forwarded to SAP.
I use the BAPI_PTMGRATTABS_MNGCREATION which has the following Input fields:
ABS_ATT_TYPE
EMPLOYEENUMBER
SIMULATE
HRABSATT_IN which contains
FROM_DATE, TO_DATE, START_TIME, END_TIME, ABS_ATT_HOURS, ALL_DAY_FLAG and PREVIOUS_DAY
My functions is working properly for whole day vacations, in this case only ABS_ATT_TYPE is set to '0100', FROM_DATE and TO_DATE to the accordings dates all other vars remain empty.
But now I try to implement the half-day vacations. I set the following values:
ABS_ATT_TYPE = '0110'
FROM_DATE and TO_DATE have the same date value
START_TIME = '080000'
END_TIME = ''
ABS_ATT_HOURS = '4,13' (germany decimal separator)
ALL_DAY_FLAG = '' (here, I'm not sure if this should be a 'X' or something)
Now I get the following error message (I've no idea how to translate this german error message, I hope someone else can provide this?)
E 12 Für An-/Abwesenheitsart 0110 sind nur untertägige Sätze erlaubt
Could be something like: 'For absence type 0110 only subsurface records allowed' ??
I really appreciate any ideas.

I doubt myself that 'subsurface' is the correct translation of 'untertäig'
But your were absolutely right with your idea of the 'wrong' starting time.
Just tried '090000' and now it works. Things can be soo easy )
I left the END-TIME empty assuming the value would be calculated automatically. But the entry in SAP shows 09:00 - to 17:00 0,88% of a day. I guessed passing the ABS_ATT_HOURS value would be enough.
I'm going to play with the parameters to figure out which are neccessary in which case.
Thanks for bringing me back on the right path.

Ipod not recognized, getting odd error message

I've seen this posted a few times, but without any hints as to how to fix the problem.
I have a 4G 20GB iPod, just over a year old (meaning, no warranty), that has worked fine until this morning. I turned it on, and all of a sudden, it kept skipping through all of my songs, and wouldn't respond to the pause, play, etc. buttons.
I attached it to my computer via FireWire, and I keep getting this odd error message: "You have inserted a device that has no volumes that OSX can recognize" It asks me if I want to ignore, initialize, or eject the disc. I've been having it ignore it, or eject it (staying far away from initialization). After I ejected it, I noticed that all the songs on my iPod are now missing.
I reset the iPod, which didn't do much, and now I can't restore it, because neither the computer or iTunes recognizes my iPod. It shows up in Disk Utility, but I'm not entirely sure how to proceed.
What happened to my iPod? I can't seem to find anything in the Apple support pages that seems similar to my situation. Any suggestions on how to get the thing to work again?
Edit: I am using iTunes version 4.9; I have not updated to 5.0

This is the most frustrating tech trouble!
The same thing has happened to my iPod. It worked fine, then one day I plug it in and it says "Disc inserted is unreadable by this computer". As far as I remember, I didnt' update anything, make any changes, or adjust any settings to any of my hardware. SO WHAT HAPPENED?? And now I can't restore or doctor the iPod hardware bc my computer won't recognize it as actual hardware...
pleeeeease help, if anyone has a way to fix this.
The weirdest part, is that when I look at the information of the "unreadable hardware" it describes it with all the information, like how many gigs are available, how much space is used up, latest updates etc. So it can transfer information, but it pretends its unreadable? i dont understand.

Odd error message when attempting installation of iTunes 8

When I try to install the iTunes 8 (the most recent version), I get an odd error message and am unable to successfully complete the installation. This is the message:
Could not access network location
%USERPROFILE%\Start Menu\Programs\Startup\
This message is then followed by Retry or Cancel; Retry has not worked at all with the same error message popping up. There is no error number that I can see. After I finally hit cancel out of frustration, this message shows up:
The installation of QuickTime did not complete successfully. iTunes requires QuickTime.
I think that the first message occurs during the program's attempt to do QuickTime before the iTunes. I tried downloading and upgrading QuickTime separately, but that was also unsuccessful. I do now have an earlier version of QuickTime on my computer, but that is only because I recently added some software (Rosetta Stone to be exact) that requires the 5.0 version and downloads it automatically. I also have tried the troubleshooting tips on the Apple site.
My computer is a Dell, with Windows XP Home Edition. I do have the second Service Pack from Microsoft, and should have all of the latest updates. Please help! I'm getting really frustrated with my computer and have no idea on what to do next.

When you get a message about not being able to access a network location you usually need the Microsoft installer cleanup utility.
Here is a method:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Odd error message

I am getting an odd error message with iTunes:
+The iTunes library file cannot be saved. You do not have enough access privileges for this operation.+
Any ideas why I am getting this message. My iPod never had problems before, and I am the only one who uses the computer.
Any help would be greatly appreciated.

I too have seen this error message now and again. (Right now as a matter of fact).
Doesn't appear to have any adverse affects on my music library but with over 8,000 songs I may never notice the problems.
Concerned...

N95 - odd error message

I have an N95 with Ver 20.0.015, and in the last day or so I have been getting an odd error message on start up - can someone suggest what is going on?
Very soon after turning on, the system says Installing... and then a message come up saying 'Untrusted software found on memory. To install, go to Application Manager'
I have looked at Appl Mgr, and there is an entry 'e14a45b8.sis' that says Not Installed, which is, I suspect, the guilty party.
Is this likely to be the problem, and does anyone know why I should not Remove this?

Hi jcaswell
v20.0.015 seems more intolerant of older applications than previous versions. In my case there was an eight numeral .sis on my memory card which was "Not installed" and produced this message at every start-up. Fortunately 'Googling" established that this was early Nokia "Podcasting" application which as it is now part of the firmware, could safely be deleted; now I no longer get this message on start-up. In Application Manager if you click on this application > options, you should be able to get more information about it's identity.
Happy to have helped forum in a small way with a Support Ratio = 37.0

HT1277 i have cleaned out my inbox out box and trash and got rid and i am still getting bounced message notification "bytes in the mailbox" what else shd i do

i have cleaned out my inbox, out box , and i am still getting bounced message notification "bytes in the mailbox" what else shd i do

i have cleaned out my inbox, out box , and i am still getting bounced message notification "bytes in the mailbox" what else shd i do

Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

Hi! Hoping someone might be able to help with an odd problem. I haven't found anything in the forums or the web that match my symptoms.
I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that. I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop. I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements. To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project). This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD. But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message. I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
I typically build both DVD and Blu-Ray images from the same material in the same project. I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built). And as I mentioned before, this is the first project on which I've even seen this layer break message.
Any suggestions would be greatly appreciated! I'd rather not recreate the project from scratch, but I'm worried that I may have to.
Thanks
Jon

The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
Be sure you "run as administrator" for dual layer projects.
Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
Also see these posts:
Neil Wilkes
http://forums.adobe.com/message/3466255#3466255
Neil Wilkes
http://forums.adobe.com/message/4054265#4054265
Neil Wilkes
http://forums.adobe.com/message/4054269#4054269
Jon Geddes
http://forums.adobe.com/message/4002647#4002647
shuchi shrivastava
http://forums.adobe.com/message/3905911#3905911
Jon Geddes and Neil Wilkes
http://forums.adobe.com/message/4003221#4003221

Odd error message - Can't save new Pages docs

I use Pages a lot and know it pretty well. But today I got an odd error message I have never seen. It is stopping me from using Pages.
Today, when I attempted to create a new Pages document and save it to a folder in my Documents folder (or to my Desktop), I get an instant error message saying, "The file ‘FileName.pages' doesn’t exist." (see below). In effect, Pages will not allow me to save a new file. I can open older Pages files, edit them and save them. I just cannot create a new file and save it. I have restarted Pages and my computer multiple times with no effect on this message.
Anyone dealt with this before?

There you are, Pages 5 can be relied on to not be relied on.
Not much comfort for your previous file though.
Steve Martin in The Jerk, when he sets off on his great adventure, is taught some essential life skills by his black family:
1.    Lord loves a working man.
2.    Don't trust Whitey.
3.    If you catch it, see a doctor and get rid of it.
Were he to head off today with a Macbook Air under his arm we'd have to warn him about Pages 5 as well.
Peter

I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error.

I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error. (-50). my icloud drive was stuck in an upgrade cycle, but i've stopped that and still get the error message.

I restarted itunes and tried again (based on a similar question/solution from 2012).
I don't get the error message anymore, but it's really sort of odd that after step one of sync, it looks as if sync stopped, and then all of a sudden you see step 4 of sync.
Also before the upgrade I had 7+ gigs of space free and after the upgrade I have 10 gigs free. seems like something is amiss, but it's not like I have anyway of determining that.

Some emails are not delivered, also not in LOG, no Bounce message

I am Using Mountain lion server with the server app installed.
Not the strange thing is that a lot email is not delevered to my email clients, but some are.
The email that is having problems is [email protected]
Does anybody know how to debug where the email is, that is not deliverd?
Let me explain a strange situation.
When I sent a mail true wetransfer.com from [email protected] to [email protected].
I recieve the message on info@, that is is successfull delevered at test@.. but never recieve the mail at [email protected]
Here a part of the logs:
2E673904CBB: message-id=<[email protected]>
Jan 5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: 2E673904CBB: from=<[email protected]>, size=18104, nrcpt=1 (queue active)
Jan 5 15:27:52 server.mydomain.nl postfix/smtpd[4224]: connect from localhost[127.0.0.1]
Jan 5 15:27:52 server.mydomain.nl postfix/smtpd[4224]: AB6E8904CD0: client=localhost[127.0.0.1]
Jan 5 15:27:52 server.mydomain.nl postfix/cleanup[4221]: sacl_check: mbr_user_name_to_uuid([email protected]) failed: No such file or directory
Jan 5 15:27:52 server.mydomain.nl postfix/cleanup[4221]: AB6E8904CD0: message-id=<[email protected]>
Jan 5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: AB6E8904CD0: from=<[email protected]>, size=18770, nrcpt=1 (queue active)
Jan 5 15:27:52 server.mydomain.nl postfix/smtp[4222]: 2E673904CBB: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.64, delays=0.43/0.01/0.01/0.19, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as AB6E8904CD0)
Jan 5 15:27:52 server.mydomain.nl postfix/qmgr[4178]: 2E673904CBB: removed
Jan 5 15:27:52 server.mydomain.nl postfix/pipe[4227]: AB6E8904CD0: to=<[email protected]>, orig_to=<[email protected]>, relay=dovecot, delay=0.16, delays=0.04/0.01/0/0.11, dsn=2.0.0, status=sent (delivered via dovecot service)
Also some other people are trying to mail me on test@. But I dont see the any message recieving in the logs, and also no bounce message is there.
Hope somebody can help me with this, since I have lost a lot email from now.

Dear pterobyte,
Thank you very much for you help.
I indeed use a filesending service for testing, and agree that thats not the best way to test, but it was a way.
Since most email are delivered it is hard to test when it is going wrong.
Its a good change that it has to do with the DNS.
Does anybody know how to test if DNS is installed proper? I did install a default MLS installation.
What I see is that there is one issue with my reversed DNS.
When I type in terminal:
Host server.crypton.nl,
I get my IP, but when I type:
Host 83.2.97.95
I don't see my server host but the one from my ISP.
83.2.97.95.in-addr.arpa domain name pointer 095-097-002-083.static.chello.nl.
Not
83.2.97.95.in-addr.arpa domain name pointer 095-097-002-083.server.crypton.nl
Might that be the problem?
Since you mention it can it has to do with the DNS.
Since it is all default, i dont know what is wrong with it.
Kind regards,
Flip

How to change bounce message for spam tagged email?

Hello,
I'm checking outgoing email messages for spam. I will send bounce to email sender (user from my domain) if message is tagged as positive or suspected spam. ok, I can set it, but how can I change text in bounce message?
default bounce if mail is tagged as spam is:
Your message did not reach some or all of the intended recipients.
Subject: FW: something
Sent: 7/12/2009 8:33 PM
The following recipient(s) could not be reached:
[email protected] on 7/12/2009 8:35 PM
The e-mail system was unable to deliver the message, but did not report a specific reason. Check the address and try again. If it still fails, contact your system administrator.
<smtp.domain.com #5.0.0 smtp; 5.x.0 - Message bounced by administrator (delivery attempts: 0)>
^^ but there is no information for the sender that message is not possible deliver, because is tagged as spam.
Is it possible to change this default message?
(AsyncOS: v6.5.2-101)
martin

You are correct that it doesn't appear that the Positive Spam or Suspect Spam setting doesn't appear to give you any leeway on using a different bounce profile/message to whomever you bounce it back to.
You may want to consider this workaround.
1. In the Action, change it to "Deliver"
2. In the Advanced section of both the Positive and Suspect spam, there is a section labeled "Add Custom Header". Add a custom header like the following:
X-Internal-Spam-Message: true
3. Then, since this message will still go through the outgoing content filters, you can create an outgoing content filter that looks for the "X-Internal-Spam-Message" header. If that header exist, then the outgoing content filter will match. For the action, you may need to use the "notify()" action and notify the original sender that it could not get delivered since it was detected to be spam. There is an option to attach the original message. The reason you need to use the notify() instead of the bounce() is because bounce doesn't currently have the option to specify which bounce profile to use.
You can only specify a different bounce profile in the "Mail Policies > Destination Controls".
Let me know if you have any question.

Recieving an odd error message...

For the past few days, i have been running into an odd error message whenever i try to update my iPod through iTunes.
The message is "Attempting to copy to disk "Harout's(my name) IP failed. The disk could not be read from or written too."
This always happens during the update for my iPod. It gets to about 10% updated then pulls this message out. I've tried uninstalling iTunes and reinstalling it, with the newest version, got the newest iPod updater, and even restored my iPod and tried it again and nothing has helped.
Do you guys have any idea on what i can do?

http://docs.info.apple.com/article.html?artnum=301267

Never include orig. message into bounce message/DSN

Hi all
How can i configure IronPort to never include the original message body into bounce messages or DSNs?
I would like to always include header information (sender, receipient, subject) of the original mail, but never body information or even attachments?
I already tried cli-command bounceconfig, an set max_bounce_copy=1, but then the header is also not included...?
Any ideas?
Thanks
Chris

Hi Chris,
This one is a bit tricky. The RFC does not state that one "MUST" include a copy of the original message however we do as in general its good practice and it is seen as a courtesy to the recipient.
That being said you may be able to eliminate most of the original message. You were on the right track with that option but I think you were looking for size not number of copies.
You will need to make this modification via the CLI using the command bounceconfig. Depending on the number of bounce profiles you have you may need to edit each to achive the desired results. By default there is only 1 profile listed as default.
The value you want ot chage is the following;
Please enter the maximum size of the original message (in bytes) to include in the bounced notification message.
[10240]>
You may have to make changes and test to get the exact results your looking for.
murf.run> bounceconfig
Current bounce profiles:
1. Default
Choose the operation you want to perform:
- NEW - Create a new profile.
- EDIT - Modify a profile.
[]> edit
Please enter the number of the profile to edit:
[]> 1
Please enter the maximum number of retries.
[100]>
Please enter the maximum number of seconds a message may stay in the queue before being hard bounced.
[259200]>
Please enter the initial number of seconds to wait before retrying a message.
[60]>
Please enter the maximum number of seconds to wait before retrying a message.
[3600]>
Do you want a message sent for each hard bounce? [Y]>
Do you want bounce messages to use the DSN message format? [Y]>
Enter the subject to use:
[Delivery Status Notification (Failure)]>
Do you want to parse the DSN "Status" field received from bounce responses to include in the DSN generated by the appliance? [N]>
If a message is undeliverable after some interval, do you want to send a delay warning message? [N]>
Do you want hard bounce messages sent to an alternate address, instead of the sender? [N]>
Do you want bounce messages to be signed (Yes/No)? [N]>
Please enter the initial number of seconds to wait before retrying a host that is unreachable.
[60]>
Please enter the maximum number of seconds to wait before retrying a host that is unreachable.
[3600]>
Please enter the maximum size of the original message (in bytes) to include in the bounced notification message.
[10240]> 10
Current bounce profiles:
1. Default
Choose the operation you want to perform:
- NEW - Create a new profile.
- EDIT - Modify a profile.
[]>
smurf.run> commit
Christopher C Smith
CSE
Cisco IronPort Customer Support

Bounced Message Notification?

I repeatedly get bounced message notifications, telling me to delete messages from mailbox in order to receive mail. I'm using Apple MAIL. I have deleted most of the messages and still get bounced messages. I assume the total quota includes those stored in various category envelopes. Can I increase the memory or get around this some other way?
PowerPC G-4 desktop Mac OS X (10.4.5)

The actual message you get might be helpful as it very likely contains a direct hint to the solution. Please post it here.
MacLemon

Getting an odd bounce message

Similar Messages

Maybe you are looking for