Getting Analog Video into iMovie

Greetings,
OK, so I have successfully imported digital video into iMovie on several occasions with my "newer" video camera (a SONY DCR-TRV80).
Problem is, I have and older camera (a Canon ES800A) that uses 8mm tape. I've been wanting to get rid of the camera (a nice one for it's time) but, I have about 6 tapes worth of video that I'd like to at least permanently archive.
I suspect there is some hardware device out there that will allow me do to this - can anyone tell me would I need to be shopping for? (hoping it's not prohibitively expensive!)
Any help would be appreciated!
Next up? - a camcorder with a hard disk!
Thanks,
Jim

Hi : I have a related problem maybe you could help me with....I've got about 6 Beta tapes [ remember them ? ] that I'd like to transfer to DVD while there still viewable. About 4 hours of tape on each....
I have an Optura 20 DV [Canon] and a Beta tape machine. The optura 20 manual says you should be able to run the RCA plugs out of the Beta unit into the AV jack on the Optura, then FW out into I - Movie. OR you can record onto a DV tape, then into IMovie. I've had no luck with either method. No Beta material shows on the DV monitor no matter what I do. It does play into a standard T.V from Beta, so I know the tape AND the Beta machine are working.
Do I need something like that Canopus Converter ? ....don't know if that' s the exact name .
Any suggestions appreciated...Thanks
Braden

Similar Messages

Video Converters to get Sony Video into iMovie

I am new to the video side of the world and need some advice. I am trying to import videos into iMovie. I am trying to import video from a Sony Cam, a DVD tht I made myself but mow would like to edit and my Flip Video. Additionally I will import video from a friends Nikon. Apple "suggested" handbrake, streamclip and toast. I see there a number of them on the app store. Any advice is greatly appreciated.
Zapple

Handbrake will be useful for converting the DVD back to a format that iMovie can edit. MPEG Streamclip requires some extra software still sold by Apple caleld the MPEG-2 QuickTime Playback component, download the beta of Streamclip and follow their directions for installing it will get the MPEG-2 component installed correctly. This will then let you open the DVD directly in Streamclip and get pieces out of it or just convert the whole disk to Apple Intermediate Codec. As for Sony and Flip video, don't know specifically which camera you have and what formats they record in, but there's likely a way to convert most of them into Apple Intermediate Codec which is the native editing/playback format that iMovie uses.

What cord to I need to get a video into iMovie?

What cord do I need to get video into iMovie? I have a Canon HDV video camera, a Thunderbolt to FireWire adapter but not a cord from the camera that matches. I am using a Macbook Air.

You need a Firewire DV cable like this one.
Russ

Getting analog video into my iMac G5 inexpensively

Does ANYONE make a simple A to D video converter with USB or Firewire out that I can use to play A/V into my iMac for capture in iMovie, iDVD or other software?
There are a few ancient boxes out there like the Dazzle Hollywood Bridge, Canopus ADVC-100, Formac Studio, some others...
Just wondering if someone has come out with one that is the WalMart version - just simple A/D - no format conversions or sync or fancy features...
I have read in some places that it is almost the same cost to buy a new digital videocam and just use it as the "converter", as opposed to buying a dedicated converter box. Wondering in that case if it would do it in real time, (digitally echo out of the output what is coming in the analog inputs), or if you would have to record your analog into the camera, then later play it back as digital to get it into the digital domain???
Comments appreciated and thanks in advance!

Hi igril,
both apps, iM and iDVD, expect signals via firewire; both apps using this standard, because a) it is more reliable then usb and b) the specs of fw allow a "generic" set of protocols to remotely control devices (a usb connected camcorder needs "drivers").
b) 30 frames per second in realtime into 768x576 pixles plus color info plus audio with a sampling rate of 44.1Khz... just simple A/D .. ehm, well...
in the PC market you find some cheapo usb "sticks", claiming to digitize.. but with a much smaller res...
Apple decided in meaning of simplicity, convenience and quality, not to go this route...
inexpansive? ebay some used miniDV with analogue-in or an old Formac box...

ANY way to get iTunes Videos into iMovie?

I've downloaded several videos from iTunes, I'd like to be able to burn a few of these to DVD (ideally editing out undesired content)
(I realize this will be of pretty poor quality - but would like to be able to watch from a TV rather than computer - & don't even own a video iPod)
Is there ANYway to do this?
xandra

Legality has nothing to do with this.
Alex,
are you a lawyer?
don't give legal advices, if you have no plan; you run people into deep trouble giving them "advice":
getting an account in the iTMS, you've accepted to following (http://www.apple.com/support/itunes/legal/policies.html):
CONTENT USAGE RULES
Your use of any Products purchased from the iTunes Music Store is conditioned upon your prior acceptance of the Terms of Service, including, without limitation, the Usage Rules set forth therein.
and you signed http://www.apple.com/support/itunes/legal/terms.html
TERMS OF SERVICE
9B)
... You shall not be entitled to burn Video Products.
any "burn" is a process of copying... copy rights... got it?

Where can I SAFELY get download to import youtube video into iMovie?

I posted this in the iMovie section and have not gotten a reply, so I'm hoping you guys can help:
Cnet seems to have some programs that would meet my need to get youtube video into iMovie, but a search on the safety of cnet downloads reveals that many people claim to have gotten malware from there. The last thing I'd want is to get anything bad on my brand new Air! Would be grateful for suggestions from various people on a) what program to use b) where to safely download it. Thank you in advance for helping.

Womanhattan wrote:
… and the icon won't turn colors (to indicate that I can download the video). Is there some setting on my Macbook that I need to change to allow this to happen?
just to be clear: that plugin is for Firefox, not Safari
after installation and relaunch of Firfox, you'll notice the spinning three balls, IF the plug-in recognizes 'downloadable' content - here: a youtube video.
clicking on that (very) tiny, grey triangle offers you some download options (in your language) ....

When i import a video into iMovie the quality gets very ******,but when its not in iMovie it looks awesome

when i import a video into iMovie the quality gets very ******,but when its not in iMovie it looks awesome, please help

Exact same problem

TS3720 I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

I have updated to Mac OS X v10.6.7 and STILL cannot get video into iMovie from Sony HDR SR11 :-( PLEASE HELP ME ...

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Imported video into iMovie but has no audio

Imported video into IMovie has the video but no audio. I did recently upgrade to OS lion and earlier video imports from snow leopard is fine

I too have this problem, I cannot get any audio in my imported movies, this was not a problem two weeks ago, can anyone help me?

Embedding video into imovie

Can anyone tell me if imove embeds video into imovie project, or does is always need to find the video file to play it?
thanks

fryedmeb,
I'm not sure if I completely follow your question, but I'll take a stab at it.
What appears as a single iMovie project file is really a package containing all the necessary media for the project. Video clips, audio clips etc.
It also contains a reference file with instructions on how all the pieces get put together to form the project.
But, at the iMovie project stage, all the media are discrete pieces. "Unembeded" so to speak.
Once you output (Share) your iMoive to, say, a full quality DV QuickTIme file, the movie is then rendered as one self contained file.
Matt

Getting analog video over DVI

I have a Samsung monitor connected to my 17" Macbook Pro using the Mini-Display to DVI adapter and a DVI cable. However, I believe I'm somehow getting analog video converted to a digital signal. I believe this because:
1.) The picture is noticeably not as sharp. It looks like analog video.
2.) If I reboot in Windows (via BootCamp) I get a much sharper picture - looks like digital video
3.) When the OS X first boots up I get static on the monitor, like you get on an analog TV when you can't get the station.
Anyone have any ideas about how to tell OS X to output digital video? Do I need to install a driver for the monitor?
Thanks.

Hi igril,
both apps, iM and iDVD, expect signals via firewire; both apps using this standard, because a) it is more reliable then usb and b) the specs of fw allow a "generic" set of protocols to remotely control devices (a usb connected camcorder needs "drivers").
b) 30 frames per second in realtime into 768x576 pixles plus color info plus audio with a sampling rate of 44.1Khz... just simple A/D .. ehm, well...
in the PC market you find some cheapo usb "sticks", claiming to digitize.. but with a much smaller res...
Apple decided in meaning of simplicity, convenience and quality, not to go this route...
inexpansive? ebay some used miniDV with analogue-in or an old Formac box...

DI imported an mpeg4 video into iMovie 10.0.5 and the Precision Editor is grayed out and I can't edit. Why??

I imported an mpeg34 video into iMovie 10.0.5 and I am unable to edit it. Precision Editor and Clip Trimmer are grayed out. Any idea why this is happening?

Did you get any joy with answering this?
My first thought was that maybe when you imported you chose to leave the files in place rather than copy then to the iMovie library..but I can't see where that option is now.
I too have created a short movie from load f clips..but can't export or share either..the 'Share 'menu is empty..you go to it and no sub menu appears.

Still Having issues with importing videos into imovie..

OK, having heard that Apple took care of all the issues in Imove 08, I shelled out the money and I am still having the same **** problems. I now have a canon Vixia avc video camera. If i pull the card out after taking vids, imovie will import them. Now, the problem. For a year, I would just copy the stream folder containing the mts files. Imovie will not import them. I have even tried making the folder structure and then making a .dmg and mounting it. I also tried putting the .mts files onto a card that had the structure. Still no luck. I also used Toast Titanium 10 to convert the files to .movs and .mp4. It still will not import. How in the **** is this software supposed to be this user friendly if you cant even get the videos into it to work on them. hopefully someone has some answers.
Thanks in advance
Robert

I had certain formats not working for me either. I may not be getting the jist of your importing problems but as long as you can get the files onto your computer, I would use the free software "Mpeg Streamclip" to convert everything. Once I used that I had instant success. Also make sure Perian (the free plugin you can get on apple's site) installed.
Good luck!

Getting Analog Video into iMovie

Similar Messages

Maybe you are looking for