Getting Apple Loops to work with Logic Express 7.01

i have logic express 7.0.1 and loads of apple loops. Cant get them to appear in the loop browser in Logic express. Can anybody please help?

Drag and drop the folders into the loop browser.

Similar Messages

Final Cut Studio 2 Apple Loops, Jam Packs and Logic express 8 installation?

Hi(Bonjour)!
I've currently use Final Cut Studio 2 +Soundtrack Pro 2.0.2+ application with all included Apple Loops.
I own several Jam Pack Apple Loops packages (with a less than impressive integration with Garage Band for older one).
I purchased Logic Express 8 pro today.
Is there more Apple Loops files included with Logic express 8 than with Soundtrack Pro 2?
What is the best way to install Logic express 8 Apple Loops to avoid duplicate loops files?
Thank You.
Michel Boissonneault

Well, the installation was very simple, no duplicate files and tight integration of GarageBand loops and JamPacks.
Michel B.

Does mainstage work with logic express 9

hi , do all the features and plug-ins work with logic express 9 or are some features disabled .
or are they not compatible at all
thanks

I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
GOOD LUCK EVERYONE.

I have East/West Symphony. Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony.
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Need help getting Apple Extreme to work with Be box

Anyone able to give an idiots guide to getting Apple Extreme to work with Be Box wireless modem?
Used to have Orange (Wanadoo) broadband with Livebox wireless router, which i had my AE wired up to and it worked fine. Signed up with Be* and managed to get their wireless router working and communicating with my Mac OK. When i hooked up AE the green light came on but i can't manage to get my Mac to find it.
Any help would be very appreciated.
Thanks.

Hello Orang Hutan. Welcome to the Apple Discussions!
What is your connectivity goal for the 802.11n AirPort Extreme Base Station (AEBSn)?
o Connect it directly to the Be Box wireless router via Ethernet, or
o Connect it wirelessly to the Be Box's wireless network?
If it is to go the wireless route, do you want the AEBSn to extend the wireless range of the Be Box?

How can I get an old Casio CTK-593 to work with Logic Express?

Title pretty much says it all.
I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
Thanks in advance.

Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
Fox

We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

Refresh all your devices before reconfiguring printer to connect to your computer.
a Shutdown computer
b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
d Once router is ready , put back brick at the back of the printer to turn it on
e Wait one minute
f Turn on computer
Repair your disk permission: http://bit.ly/OeD7U3
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website http://bit.ly/ToA1fo
Run firmware update http://bit.ly/AcNqbg

Cant get motif XF8 to work with logic 9

I cannot get my motif XF8 to work with Logic 9, nor is it working with any other DAW. I have used the motif since last summer and it has always been hit or miss with MIDI. Sometimes it works, other times it doesn't. The cord is connected appropriately. I am mystified, and embarrassed to admit that I really don't get MIDI at all. I have a Macbook pro that is a year old or so. Please help.

Uh . . . . . I had to adjust Motif as in Utility/Control then set the MIDI In/Out to USB. I felt very silly when I found this out.

Mobilepre audio interface not working with logic express 8

I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.I've tried every trouble shooting option in my apple pro training book like monitoring and audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
I'm new to this apple discussions business and hope someone can help!!
ps the interface works fine with garageband
cheers c

callummccall wrote:
I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.
Welcome to the wonderful world of M-Audio!!! Now, what you are doing is perfectly NORMAL. You need to hook up speakers to your audio interface. Where the little diagram says so:
http://www.m-audio.com/layout/imgview.php?i=/images/en/connectivity/big/mobilepr eusbcd779px.gif
See? The reason this is so, is because when you are using this interface, you are BOTH using the inputs AND outputs. Logic always works like this, it is a requirement to use "a full-duplex sound card" which means a sound card that has inputs and outputs.
I've tried every trouble shooting option in my apple pro training book like monitoring and
audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
I'm new to this apple discussions business and hope someone can help!!
ps the interface works fine with garageband
cheers c
M-audio blaming everyone else is not new, however, your "issue" is a user issue, not a gear issue.
Cheers

Cant get Apple TV to work with 5200ES receiver.

I'm hoping someone can help me understand what isn't working correctly here. I have a 5200ES receiver which is connected to an (old but nice) Fujitsu panel with a DVI input via an HDMI to DVI cable. I have other devices - Xbox360, Wii - connected via component video, and a Sky HD box connected via HDMI1. My 5200ES is curently set up with two front speakers connected in bi-amp mode (i.e. rear channels used to drive the bass/mid, front channels the treble), a centre channel and a sub. I have no problems with picture and sound from existing devices; although, in some circumstances, notably with the Xbox 360 playing movie trailers and some movies using the Amazon Prime app, I have had a 'tinny' sound that only seems to come from the treble of the left and right channel. But some other movies worked fine and I don't know why. I bought an Apple TV and plugged that in via HDMI2. I got no picture or sound. I used the Apple TV remote to cycle through available screen resolutions and couldn't get any picture, although occasionally got the message 'out of range' and occasionally got a flash of a screen with an Apple message on it, before either getting screen noise, or a black screen. Still no sound though. Eventually I went into the 5200ES menu and changed the screen output to 720p and managed to cycle the Apple TV to a 720p resolution and I got something on screen (having said that, next time the Apple TV went to sleep I was then unable to get back to any screen at all). But no sound so I attached an optical cable to the back of the Apple TV and to the OPT 3 input at the front of the receiver (as the only digital input I could share with HDMI2). I then got sound, but again this was only tinny and came from the tweeters of the bi-amped front speakers. Basically unusable. As a test, I connected the Apple TV to the HDMI-DVI cable into my Fujitsu plasma panel and it immediately dislayed a screen. No sound, of course, but that should be handled by the receiver anyway. I also took the Apple TV into our kitchen to plug it into a small Samsung LCD TV we have there that has an HDMI input. It worked faultlessly and displayed content with full sound immediately as you would expect. So, in summary I am not able to reliably switch the HDMI input of the Apple TV into my panel and see its output, nor hear sound from HDMI or usable sound from optical (which I shouldn't need of course, and looks unsightly with the extra cable draped over the front of the receiver). However, another HDMI device, being my Sky HD box, works perfectly. As it stands I can't use the Apple TV through my Sony 5200ES, so I'd appreciate any advice and guidance on what to do. I can only assume I will solve the sound problem by switching off the BI-AMP option as that doesn't work with all material or sources, and may allow me to get rid of the optical cable, but still have an unreliable screen display and can't easily switch between video sources until I know what to do.

Hi peter_964rs,
Thank you for your message. Unfortunately, we are unable to assist customers outside of the US. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/. >Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Old USB Quattro interface--will it work with Logic Express 8?

I have an old m-audio USB Quattro interface (4in/out) which I used with Cubase years ago. I have it hooked up to my wife's intel iMac with more than enough RAM. Logic seems to run fine, but I get a very weak signal through the interface. Apparently I have the correct driver. I don't mind buying a new interface if this one is not going to work, but the hard part may be in determining whether or not it will work. M-Audio doesn't seem to know (I'm less than thrilled with their support). Any experience or thoughts on this?
thanks!

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Working with Logic Express and Sibelius Student

Help! I just downloaded Sibelius 6 Student edition and my Logic Express 9 files are playing back with all voices as piano. What's the fix?

Hi,
you probably have to change the program select value at the start of each MIDI track and/or select another MIDI channel for this track.
Fox

How to work with Logic Express 8 and Garageband 11 v.6.0.4?

I just installed Logic Express 8 and I don't know what it's done to my existing Garageband files - they seem to have been overwritten into Logic folders. I don't seem to be able to open them in either program. I'm sure there are answers buried in the files here, but I'd appreciate a quick How To, please! Can't work.

You need more to be sure the Digidesign core audio drivers are installed for your MBox, which are separate from the firmware upgrade.
A standalone installer for the OS X (10.4) drivers can be found at:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=24268
While I'm glad to hear you're using Logic, your iMac should have no problem running ProTools LE. The current version, 7.3, has universal binary support for the new intel Macs .... dependign on the version you have, though, you may need to pay a small amount to upgrade to 7.3 The updaters for 7.3 also include the core audio driver package I mentioned above, and the ProTools LE 7.3 updaters can be found at:
http://www.digidesign.com/index.cfm?navid=3&langid=100&eid=170&categoryid=36

Groove Agent 2, can it work with Logic Express 8?

I have Logic Express 8, and Steinberg Groove Agent 2. I was able to install it, but when I open Logic Express 8, Groove Agent 2 is not in my list of instruments.
When I installed Groove Agent 2, it did not ask me for my activation code, which I thought was strange.
Groove Agent 2 is an AU.
I have a White MacBook, 2.1 Intel, 4gigs RAM, and Leopard 10.5.8
Thank you in advance

I used to use GA2 on my PC (before I became a Mac user). Once I bought my Mac I got rid of my PC.
But the disc I have for GA2 has both the PC and Mac version on it, so it was working on my PC, but not on my Mac.
When I try to start it use it as a standalone on my Mac, it starts to load, then a message window appears and says: "No protection device is connected".
I never had this problem when I used to use it on my PC.

Can't get EPSON nx300 to work with airport express

hey yall
i'm running a 3 year old white 13" macbook with 10.5.7 osx installed -~- having trouble getting things to print via my new airport express. my boyfriend has no troubles with his brand new macbook pro - it just worked instantly for him.
my computer is able to recognize the printer in a 'Bonjour' location when i add the printer, but when i go to print, it just opens an empty print queuueueue and nothing happens.
i tried installing the latest EPSON drivers to no avail, so i deleted all of them, which also didn't help.
eep
kevin

Welcome to the discussions!
Don't have an exact answer because I can't replicate the problem, but will offer a guess for what it's worth.
You are running Leopard 10.5.7 on your computer and the MacBook Pro might be running 10.6.x Snow Leopard, which may have updated printer drivers for the USB port on the AirPort Express.
Try updating 10.5.7 first by clicking the Apple icon at the upper left of your screen and then clicking Software Update. This may allow you to move to 10.5.8, which did offer a number of printer updates.
Then work your way through the Apple Printer Troubleshooting Guide to see if that might help allow printing to occur.

Getting Apple Loops to work with Logic Express 7.01

Similar Messages

Maybe you are looking for