Getting audio but not video during playback using Airplay-

I'm using my iPad 3 to stream content from my Amazon Prime video account the via Airplay to my Apple TV. I'm getting the audio, but not the video. Are these units capable of doing what I'm trying to do, do I have to set up certain settings to do this? Help!!!

How do you know or find out if that's indeed what they're doing of if something is after all technically awry?

Similar Messages

Having difficulty -- via airplay -- w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???

What site are you trying to watch? I just tested 3. The you tube app streams from the pad to apple tv fine, as long as the source video format is ok. Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine. A few have a different format, and do audio only. Netflix does not stream at all, but you can get to netflix directly from apple tv. Whether or not it streams is directly related to the format of the video. Some do, some dont.

I get audio but no video when trying to AirPlay from iPad to apple t.v.

I tried to play from CCTV app to Apple TV I only get audio when I it the airplay button it tells me to double click home button and swipe left select mirror button but that is not there. When I try to play normal movie already on my iPad it works no prob.

Yes, but if the icon is there, then it's been enabled, right? So if you're getting audio and not video, it's enabled, but not working properly. I have enabled apps, and they barely even get chunks of audio. Useless...

I bought a component av cable for my ipad2. I get audio but no video. user guide states that it should mirrorthe screen when connected. Can someone please help?

I have an Ipad 2 and I am trying to use the a new component av cable I bought to play hulu on my tv from the iPad 2. I get audio but no video. Can any help?

willyinpr wrote:
...Here you can see "TV OUT", where it says "widescreen" make sure is ON.
I have my iPad Video set to "widescreen", but it didn't make a difference when I briefly tried it with a HDMI connection from my iPad2 to my Samsung TV. The video was letterboxed as was the iPad homepage when it was displayed on my big TV.
I didn't try a streaming video so I don't know if that would be letterboxed or not. I do have a movie on my iPad and I'll give it a try (perhaps tomorrow). If it isn't letterboxed, I'll post it here.
Overall (at least via HDMI), I was very unimpressed with the process. The picture seemed washed out and the resolution certainly suffered. I don't remember what my test video was, but the results were what one would expect with a SD signal. At this moment I don't see any serious usage of this process for me.

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

I have windows 8.1 and the latest version of flash player. I'm getting audio but no video (it just displays a green screen.) How do I get video?

Thanks but I found my problem. It was easy oncew I found out the flask player was also called shockwave. My shockwave add-on was disabled. I'm not certain what caused the condition. I was good one day and not getting the error messages the next day. But, I know what to look for in the future if it reoccurs. Thanks again.

I get audio but no video unless I play the file from UTube

I get audio but no video unless I play the file from UTube

Use a different browser?
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.
Even if it's just to redownload the driver. I recommend another browser.

Flash player 11.6.602.180 plays audio but not video...

Very similar to problems reported by others. Just started recently... flash player on Win 7 and IE 10 plays audio but no video... just black box or blank.
Have reinstalled flash player several times... including following all clean install instructions several times. Installation completes and and tells me it's installed successfully.
Have carefully matched IE settings to allow activeX content and have enabled the flash player object and turned on active scripting for all zones, etc. Still no video.
Going to the flash verification page shows a blank box where the current installed version should be.
If I look in control panel under Flash Player it tells me the activeX version is 11.6.602.180 and that the plug in is "Not Installed"... could that be the problem?
What can I do to fix this? Thanks in advance for any help.

What is your display adapter, device driver version and date? See http://forums.adobe.com/thread/945765

Why can't I get video when watching wmv files. I get audio but no video. And yes, I've loaded the latest version of flip4mac.

When I try to play a wmv file on my Mac I get the audio but no video. I've downloaded the latest version of Flip4Mac but that doesn't seem to help. I recently "upgraded" to Lion. Any connection?? Any ideas??? I posted this a week or so ago and was told to download the latest version of Flip4Mac. Let me repeat: I've already downloaded the latest version of Flip4Mac and it doesn't seem to help.

So did you download the latest flip4mac? (just kidding)
Does this happen with all wmv's or just specific wmv files?
Try playing them with vlc to see if they play there.

Problem: Exporting audio, but not video

After exporting my finished movie, some clips are gone but others play just fine. The audio for the missing clips is perfectly intact, but the video is just gone! Instead I get a still image from the previous clip with the missing clip's audio acting as a voiceover. I need to finish this project by next week, so please respond quickly.

Be sure the video clips you are using have the correct codec. I had this problem, re-exported my video using the H.264 codec and it worked find.
Good luck!

Adobe premire CC will play audio but not video

Hello guys I'm having an issue i recently upgrade my pc and added a second video card I have two amd readeon r9 290 with crossfire enable. Last night after installing both video card I ran premire and it would show the thumnail of my video but when i played it back only the audio would play but not the video.
Pc specs
Cpu: amd fx 8350
Motherboard sabertooth 990fx r2
2x readon ati amd r9 290
Thanks in advance for the help

http://docs.info.apple.com/article.html?artnum=302828

Burned dvd plays audio but not video

I just completed the first part of a wedding video and it burned fine. I just finished the second part and it looks and plays fine in imovie and idvd preview. However when I burn it and try to play it the dvd will only play the audio. the dvd starts like it's going to be fine, but the video stalls on the first frame and the audio continues. does anyone have any suggestions. I am trying to avoid starting over, but I don't know what else to do. I tried eliminating the first clip in case it was corrupt, but that didn't help.

First thing you might do is in iDVD, use the menu option to "Delete encoded assetts" in case the previous garbage from the last project or burn is messing things up. If that doesn't work here are my standard list of things I do when I have issue or even just before I go to burn a new project...
Run Cache Out X (free download) to clear all system and application caches.
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Reboot your Mac.
Patrick

Still Need Help: printing audio BUT not video to panasonic DVX 100A

i've never had this problem before, never.
i haven't printed to video that many times on this
camera, but i have done it a few times, with the same
computer set up.
i've re-booted, un-attatched cables, re-attatched them,
but still not showing video on the monitor window on the DVX.
can some one help??
and besides the audio getting to the camcorder,
the screen does go black (instead of blue), just
no video image.
i've followed the same procedure for the last 5 years using Final Cut Pro:
- selecting the sequence on the Browser
- selecting mini dvd firewire (instead of 'none')
on the drop down for Audio/Video quick setup.
- and i've selected using same destination for 'print to video' as the source of video
- under View, external video shows 'all frames'selected.
- the pref's shows i'm using the DVX instead of another camera.
thanks,
kyle

I'll back up Studio with my usual list:
#8 External Monitor Viewing.
Shane's Stock Answer #8:
A simple path is mac > firewire > camera or deck > rca cables > tv
Then start up your camera and tv, then open fcp.
Then go View > External video > all frames
Video playback should be Apple firewire NTSC (If you are using an NTSC set)
Audio playback should be Audio follows Video
Techinially, this should send synched video to your TV
If for some reason you can't view your timeline on your external monitor, there are a few things to try:
1) Make sure that the camera/deck is connected and powered on BEFORE you open FCP.
2) In the Final Cut Pro menu select AUDIO/VIDEO Preferences and make sure your signal is being sent out thru Firewire DV.
3) Go to the menu and select VIEW>EXTERNAL>ALL FRAMES.
4) Click in the % box above the image and select FIT TO WINDOW.
5) Go to VIEW->refresh A/V devices
6) Make sure the Log & Capture window is closed
If you want it to play in both the canvas and the external monitor you need to go to the FINAL CUT PRO menu and select AUDIO/VIDIO settings and make sure MIRROR ON DESKTOP is selected under the PLAYBACK OUTPUT section
Shane

Front Row plays audio but not video of MP4 H264 AAC files

SL 10.6.6
Here's the problem:
Take an MP4 movie file encoded with H264 and AAC thats plays with no problems in QT, iTunes, Front Row
Open this file in QT7Pro, add a mask using a GIF file then export as MP4 using video and audio pass through to avoid re-encoding
The new video file plays OK in QT and iTunes but only plays the audio track in Front Row - the video is just presented as a blank screen
This happens to every file i've tried it with.
I've tried trashing all front row caches/prefs/app support folders, installing/uninstalling/re-installing perian. i've tried changing the file extension to .mov .m4v .3gp - still the same problem the file plays perfectly except in Front Row
All the posts I can find on this topic seem to refer to subtitles causing a problem - these files have no subtitle track
Any suggestions?

I have faced the same problem exactly. Some seasons and one movie I have detected so far, do not show any video at all. If I open the same files in iTunes, they show ok. If I open the same files in QuickTime thought no video also. I guess it has something to do with QuickTime then. Try it yourselves in order to see if it is the same problms with you guys. If that is the case I will try to extract an older version of QuickTime from the installation package via Pacifist and see if that works.
Even if it doesn't work I am pretty sure they will come up with a new update fixing this, but the point is that Apple isn't used in making bugged updates, up until recent. What is wrong with them lately?
Anyway, as soon as I have news in the afternoon I will let you know

Chromebook flash player works except at IMDB, plays audio but not video for movie trailers.

Using Flash version 15.0.0.189.
14 q039 Chromebook
I have been using my new HP Chromebook for a couple of weeks now. Very trouble free and fast, with little bloatware. This leaves me with time to pursue funny little inconvenient glitches like trying to figure out why I have audio and a black video screen in native (small) and full screen modes at IMDB (Internet Movie Data Base). Yes, I tried their FAQ and the Adobe FAQ without a resolution.
I am an old mouse who knows that somebody above the maze that I am in, will know exactly where the cheese is.

I'm having the same problem on both windows and mac OS. This seems to be a bug because QT 7.6.5 plays them fine on either machine, but QT 7.6.6 does not. I have over 2000 files encoded using h264 which played perfectly before the upgrade. I tried logging in under a different user which does Not work. I notice also when I view them in the finder window there is no poster frame, only the letters MPEG4 under the quicktime logo
I hope this is an easy fix. I don't want to re-encode all those files and upload them to my web gallery.
Help!
Thanks

MP4 files have audio but not video

Using Premiere Pro CS6, I have no video when importing clips shoot with the new Canon HF G30. The clips are shoot in 1080P @ PF25 (25P). The audio is fine, but there simply is no video. Importing AVCHD clip from the same camera has no problems. Any suggestions as to how I get these clips imported with both video and sound?

Here they are:
MP4:
And the AVCHD:
Remember, I have tried importing both clips in Premiere Pro CS6, and the MP4 clip shows no video. The AVCHD clip does.

Getting audio but not video during playback using Airplay-

Similar Messages

Maybe you are looking for