Getting audio from Pre Pro into AE for Music Video

Hello All, My situation is this.
I'm doing a Dance remix Music video. The original song was a ballad. The footage used for the Dance Mix consists of both the ballad clips sped up (ballad music was at 61 beats per minute) and footage shot to the dance track (127 BPM) all of which is Green screen.
The way that I approached it was to put the .wav song on one track in Pre Pro and then I synced up the rough mix edit clips to the main music track, time stretching the Ballad clips, making the mouth movements match and body movements move in rhythm. After I got all my rough edits done I discarded their audio tracks as I thought that I would not need them further, and it was too many tracks to look at (Pre Pre could use a Shy switch). So I ended up with one Audio track and 12 Video tracks, each track containing one pass of the filming.
Then I selected each rough edited clip and used "Replace with an AE composition". In AE I then did my green screen keying. One Scene I created was a composited club scene in AE where the artist is on a stage and there are flashing lights behind her using several instances of CC Light Sweep on a Solid Layer. When I Dymically Linked back to Premiere the light sweeps were not in rhythm with the music as I had no audio to listen to in AE.
Its a lot of render time tweaking in AE and then going to Pr Pro and having to wait for more rendering to see the results.
My Question is how would I go about putting the audio track into the AE Linked comp. The song is over 5 minutes and most of the clips are a few frames to a couple of seconds long.
I think my approach was wrong in the first place and that I should have made an AE project the length of the song and done all my editing and compositing in that one Comp instead of putting things in Pr Pro first, which now makes sense, since I don't see any benefit of being in Pre Pro at this time. And I don't see any way of including part of the audio track when making the AE Linked comp.
Thanks

Export just the audio track from Pr as a .wav file and then add it as a layer in your AE comp.
Cutting is much easier in Pr, especially the audio. The first time you try cutting audio to video in AE, you'll know what I mean.
-Jeff

Similar Messages

Adding Audio from a Premiere Layer into AE for music video

Hello All, My situation is this.
I'm doing a Dance remix Music video. The original song was a ballad. The footage used for the Dance Mix consists of both the ballad clips sped up (ballad music was at 61 beats per minute) and footage shot to the dance track (127 BPM) all of which is Green screen.
The way that I approached it was to put the .wav song on one track in Pre Pro and then I synced up the rough mix edit clips to the main music track, time stretching the Ballad clips, making the mouth movements match and body movements move in rhythm. After I got all my rough edits done I discarded their audio tracks as I thought that I would not need them further, and it was too many tracks to look at (Pre Pre could use a Shy switch). So I ended up with one Audio track and 12 Video tracks, each track containing one pass of the filming.
Then I selected each rough edited clip and used "Replace with an AE composition". In AE I then did my green screen keying. One Scene I created was a composited club scene in AE where the artist is on a stage and there are flashing lights behind her using several instances of CC Light Sweep on a Solid Layer. When I Dymically Linked back to Premiere the light sweeps were not in rhythm with the music as I had no audio to listen to in AE.
Its a lot of render time tweaking in AE and then going to Pr Pro and having to wait for more rendering to see the results.
My Question is how would I go about putting the audio track into the AE Linked comp. The song is over 5 minutes and most of the clips are a few frames to a couple of seconds long.
I think my approach was wrong in the first place and that I should have made an AE project the length of the song and done all my editing and compositing in that one Comp instead of putting things in Pr Pro first, which now makes sense, since I don't see any benefit of being in Pre Pro at this time. And I don't see any way of including part of the audio track when making the AE Linked comp.
Thanks

I don't really get the problem, I must admit. If the final audio exists and the clips have been mangled correctly in Premiere, the timing should match in any case. Why would you even need the clip's source audio? The way to work in AE is to simply create an audio preview and place markers on important cues by hitting the multiply key on the numpad while the sound plays... Everything else shouldn't matter.
Mylenium

How do I get audio from MacBook Pro to Samsung monitor?

MacBook Pro - I've just bought an S27b550V Samsung monitor to connect to the MacBook Pro but even with hdmi adaptor and usb connection can only get video. I set sound control to recognise the usb output but still nothing but a faint muted sound from the monitor. How do I get audio to work?

I don't think that a USB connection is going to do anything - as you've a Mac with a Mini DisplayPort that, I don't believe, will carry audio over HDMI, you'd need to use the 3.5-mm analog/optical combo jack optical jack to get video to your Samsung monitor.
Clinton

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

Problem when exporting audio from Premiere Pro v4.2.1 into wave 5.1 format

Hello to Adobe experts!
After installing of last updates for Adobe Premiere Pro (v4.2.1) and for Media Encoder (v4.2.0.006) the was a problem:
Now I cannot to export audio from adobe sequence into uncompressed wave format with 5.1 channels settings. Source m2ts video files in sequence are with 5.1 audio.
What I doing:
1) in Premiere I execute "File\Export\Media"
2) Export settings are:
- format: Windows Waveform
- audio codec: Ucompressed
- basic audio settings: 44100Hz, Channels: 5.1, Sample Type 16bit
3) After OK button it opens Adobe Media Encoder.
4) After pressing Start Queue in Adobe Media Encoder there is a message "Error compiling movie. Unknown error"
In earlier versions it worked fine.
Can you help me with this problem?
Alexander

Here are the options, from a sequence with 5.1 master track:
and with Surcode:
Notice that first one does only give stereo as an option. Nothing more. With Surcode it gives you 5.1 sound.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Get audio from a DVD onto CD?

I just got a DVD of the Cream Albert Hall concert. I want to get the sound onto a CD so that I can play it in the car or on my iPod. Is there a way to do this? I don't want to just buy the CD too. For one thing, the CD doesn't have all the songs that the DVD has.
PM G5 2GHz Mac OS X (10.4.3)

First of all denke, welcome to the discussions!
I hope that your head is not spinning after reading my post - LOL!
It is not a quick process, but it certainly can be done. I have followed this process for several concert DVDs that I own and I am quite happy with the results. Best of all, it can all be done with free software, but there is one small program to buy to give it a more professional touch and amke it much easier on the ears.
First, download OSEx. This will allow you to extract only the audio files from a DVD.
To demux/extract only the audio with OSEx, splitting the audio in one file per chapter (usually equivalent to a song for music videos):
- After starting OSex and inserting your music video DVD, make sure the correct title is selected by clicking on the "TI" button.
- Click on the "VID" button an deselect the video stream(s).
- Click on the "Aud" button and select the appropriate audio stream (usually 2 channel AC3).
- Click on the "Fmt" button and select "Elem. streams."
- Click on the "Seg" button and select "Chapter" to split the audio by track in separate files.
- Click "Begin" to start audio axtraction.
If you have a few songs that span several DVD tracks and have no break in them, you can encode them as one audio track by selecting those tracks together and encoding them as a single selection.
Then, download mAC3dec. This is a program that will convert the resulting AC3 files from OSEx into MP3s. I use the highest bitrate - 320 - so that my audio is as close to the source as possible.
Then - the finishing touch - but one that costs $10.95. It is well worth it. Download MP3 Trimmer. This sweet little program allows you to trim the beginning and ends of files off and even apply a fade in and out without re-encoding the file and eliminating the resulting loss of sound quality. This means that you can cut the applause out of the beginnings and endings of the tracks, and since you can fade in and out, you lessen the "shock" of the breaks in the tracks that can be so annoying.
All in all, it sounds harder than it actually is, but it is well worth it for a whopping $10.95 for all three programs.
BTW, I am not connected with these companies at all and receive no compensation of any kind. It is just a process that I did a lot of research on and came up with these three programs and the steps to create a nice, professional sounding CD from concert DVDs.

Cannot play audio from macbook pro 2009 to tv using hdmi with adapter

MacBook Pro 2009. I cannot get audio from my my macbook pro to tv using an hdmi adapter

That is because the 2009 MBP does not support audio via the minidisplay port. You will have to tap the audio output port for audio and use the RCA audio input connections on the TV.
Ciao.

Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
Edgil

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

How to get values from a table(in jsp) for validation using javascript.

hi,
this is praveen,pls tell me the procedure to get values from a table(in jsp) for validation using javascript.
thank you in advance.

Yes i did try the same ..
BEGIN
select PROD_tYPE into :P185_OFF_CITY from
magcrm_setup where atype = 'CITY' ;
:p185_OFF_CITY := 'XXX';
insert into mtest values ('inside foolter');
END;
When i checked the mtest table it shos me the row inserted...
inside foolter .. Now this means everything did get execute properly
But still the vallue of off_city is null or emtpy...
i check the filed and still its empty..
while mtest had those records..seems like some process is cleaining the values...but cant see such process...
a bit confused..here..I tried on Load after footer...
tried chaning the squence number of process ..but still it doesnt help
some how the session variables gets changed...and it is changed to empty
Edited by: pauljohny on Jan 3, 2012 2:01 AM
Edited by: pauljohny on Jan 3, 2012 2:03 AM

I am having trouble getting audio from a DVD.

Initially when I insert the DVD i get audio playing. Then, I pair my bluetooth headphones, they say they are connected but I get no audio from the laptop speakers or from my headphones. I disconnect the headphones and still get no audio from the laptop. I have ejected the DVD and tried to start over and still have no audio. I would like to have audio from my bluetooth headphones because this is a workout DVD. Oh, I can get audio from itunes when my headphones are connected.
Thanks in advance!

There are differences among MacBook models in that most cannot use audio over HDMI, and according to at least one answered reply here in ASC discussions, you'd need another cable or adapter for audio if you don't have a 2010 MacBook...
Here's a similar discussion with ideas, from a few years ago:
•I'm trying to hook my MacBook to my TV:
https://discussions.apple.com/message/16089168#16089168
You could check some of the similar discussion links to the right
of your posted question (this column) to see if other ideas are
offered; but this one seems to cover a general circumstance &
it may be workable if you get the correct parts.
Good luck & happy computing!

Can I import just the audio from a DVD into itunes????

I'm a beginner to this Itunes and have been wondering this. If I can take audio files off of CDs and put them into Itunes. Can I take just audio from a DVD and put that into Itunes. Example: Can I take the audio from a live concert DVD for just one song?

Welcome, Don, to the Apple Discussions!
No, you can't do that with iTunes.
There is third-party software available that allows you to do so, though.
You might want to pay a visit to Google and enter
b dvd audio ripping
or some such terms.
Good Luck!

How do I get photos on my iphone into photostream for icloud?

how do I get photos on my iphone into photostream for icloud?

have you you downloaded the icloud software on your PC? Once it is set up the photos should go from your camera roll to the photostream automatically. Just go search for download icloud in google and install it. You also need to check you have the photostream turned on on your phone. Go to settings, icloud then photostream and check it is turned on.

Exporting from Premiere Pro into Story

Can the metadata etc be exported from Premiere Pro into Story.
For example in the process of roughing out a documentary idea I'm shooting clips and making subclips in bins and developing sequences in this rough style. It would be useful to document this in Adobe Story if such an interface exists thanks...
Many thanks

The closest I can find is here:
http://helpx.adobe.com/story/help/workflow-movies-script.html
Seems like there is a semi-manual solotion ... has anyone used this reverse workflow in anger I wonder and can describe their experience, the results and the potential?

TS5180 I have no audio from my iPhone 5 except for the ringtone. Wondering why. Hellllllllllp!

I have no audio from my iPhone 5 except for the ringtone. Wondering why. Hellllllllllp!

AIrplay is not supported on 1st gen, I assume you have a 2nd gen (black box). Not all apps are enabled for AirPlay, this would be up to the developers to do

Getting audio from Pre Pro into AE for Music Video

Similar Messages

Maybe you are looking for