Getting audio to play in on my website in safari.

I have a music website (for an artist). I have song samples on thew website. I am using html5 with the audio tag and java/jQuery. It all works great in firefox, and chrome, but won't load or play in safari. Anyone else having this problem?

Huh. I could have sworn I'd done it before, but I just tried in 5.5 and a 6.0 trial, and the audio section in the properties panel completely disappears when I select mutliple slides... Strange.
It's a shame you had to go through such a long project slide by slide, Jay; I feel your pain. I'm not sure what else to suggest for future projects if that method doesn't work...
If your project doesn't have any other audio, you could perhaps mute the project audio on the slides that you don't want background audio (the Action section in properties allows you to set an "on enter" action when you have mutliple slides selected). Or if you have audio on all your slides but the background audio slides, you could configure the background audio when importing to have 0% volume on slides with audio. But those are two rather specific cases.

Similar Messages

  • How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.

    How can I get audio to play from my TV when using hdmi cable?  Video looks great, just no sound.
    I've tried plugging the hdmi into the TV directly and the receiver.
    I get video every time.  HBO to Go , Xfinity, ABC, Youtube, etc...
    just no audio.  Any suggestions? 
    I've tried starting the apps then plugging in the hdmi cable.
    I never tried this before I upgraded to IOS 5.

    Claudiamil-
    I had not tried it with mine since upgrading to iOS 5, so I just did.  I'm using a small Vizio HDTV.  I did not try YouTube, but did try several videos and musical numbers.  In all cases there was sound, including stereo when the source had it.
    I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down.  Dah*veed's suggestion to reset may be what you need.
    Fred

  • How to get audio to play through TV?

    I have a Thunderbolt to HDMI cable and can only get video to show up on my HDTV screen. I am trying to get audio to play through the TV as well, but it only plays through my Macbook Pro. Any suggestions?

    Hi ajlarson6,
    I found some information concerning the settings that need to be in place to play audio through a TV:
    OS X Mountain Lion: Use a television as a display
    http://support.apple.com/kb/PH10671
    I hope this helps!
    - Ari

  • Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

    Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

    First, back up all data and then uninstall "DivX" according to the developer's instructions.
    Then try this:
    VideoLAN - Download official VLC media player for Mac OS X

  • How to get audio to play on Ipad using flash cc html5 canvas

    I'm using flash cc html5 project type. I built my project and tested on desktop and it works fine. Once test on ipad it does not play the audio. It works on android  devices but not my ipad 4. I'm using Mp3 files in my flash project.
    I tried the safari & Chrome on my Ipad neither played the audio in my file.
    Links to my files.
    http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.html
    http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.js

    Thanks I read through that. I still cant determine what exacty my issue is.
    Is it audio must be played only on a click handler?
    Is it that i must install quick tiem on my ipad?
    So i have to modify code that flash outputs for me to get audio to play on an Ipad? That doesnt seem correct? It should just function.

  • FCP Video files burn to DVD, Only gets audio when played

    Hi,
    I know this has been asked many times, but, it's late at night and I'm looking for a quick answer please.
    I burnt ideo clips,which I have exported thru FCP, and burn them straight onto a DVD thru the Finder.
    The person who got the DVD said he only gets audio from the clips, so, he can't see them.
    Have many ideas of what I should do, but, what is the most common solution to this problem?

    #48 - Cannot view DVCPRO HD or HDV or ProRes on my computer.
    Shane's Stock Answer #48 - Cannot view DVCPRO HD, HDV or ProRes QT files on your computer.
    The DVCPRO HD, HDV and ProRes codecs only comes with FCP. If your computer does not have FCP installed, it cannot view these quicktime files. It doesn't matter if it is a Mac or PC, without FCP installed, you cannot view these files.
    If you need to view ProRes material, you can download the ProRes decoder (mac and windows compatible) for ProRes
    http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forWindows.
    http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
    If your footage was captured as DVCRO HD you can buy the Calibrated DVCPRO HD decoder:
    http://www.calibratedsoftware.com/QDVCProHD.asp
    HDV, XDCAM? Calibrated has you covered too:
    http://www.calibratedsoftware.com/QXD.asp
    If you have MXF files from a P2 camera and you need to view the footage on a computer without FCP, you can download P2CMS from Panasonic:
    http://www.panasonic.com/business/provideo/p2-hd/downloads-and-updates.asp
    Or you need the other party to compress the footage into a format your computer can play, like H.264.
    Shane

  • Getting audio to play through computer speakers

    Hi
    Ive got an external NSTC monitor and im trying to get the sound to match up with the video on it. If i do audio follows video, then the sound comes out of the monitor which sounds like crap because it has bad speakers. If i make the audio come out of my computer speakers, then it is out of sync with the video on the external monitor. i guess i could get a bunch of cords from radio shack and get a splitter and plug the computer and the audio into my computer speakers, but i was wondering if there was a way within final cut to get the audio to play in sync but not through the external monitor's audio.

    well i do have good speakers<<</div>
    Good speakers and good monitors for editing work usually aren't the same thing. In post work, either video or audio, the audio monitors need to have a flat response; they should not color the sound in any way. That's the only way you know what the true audio will sound like.
    Most speakers, including computer speakers do color the sound; some quite a bit, especially in the low end.
    Nearfield monitors do provide a flat response and are designed for use in recording studios and edit suites for critical listening. When working in FCP, the ideal setup is to ALWAYS monitor your audio and video through the same path out from the computer, converted to analog and then the video going to an properly calibrated external TV monitor and the audio going to the audio monitors.
    -DH

  • Can I get audio to play til the end, even if I turn the page?

    I know how to add a quicktime audio file, but once you turn to the next page, the audio file stops. Is there a way to set the audio to play til the end regardless of how many pages you turn? Or would I have to split up the audio and have the user play it on each page they turn to?
    Are there any options for the audio player interface? Or would I have to resort to using a widget?

    I've just bought the enhanced edition of The Story of Naxos, and was intrigued to see that the embedded audio files do continue playing after the page has been turned.  So it's clearly something that iBooks itself is capable of handling, even if iBooks Author doesn't cater for it - and I've also submitted a feature request pointing this out.
    And with regard to the "superfluous" comment, it depends entirely on the nature of the project.  The one I've postponed until this feature is introduced involves recordings of Schubert songs that are supposed to be playable over the original German lyrics, an English translation, a musicological analysis and a facsimile of the score - the idea being that you can listen to the complete song while exploring various aspects of it.  But it's impossible to fit all this material onto one page, and even reading it in portrait mode doesn't work, as the music stops playing as soon as the embedded images from the score appear.

  • Getting Audio to play in the Background but only over a small selection of slides?

    Hope someone can help with this. I have a module at the moment which I have created and I want to run some cheesy suspense driven quiz show music over my end of module quiz. I have to admit to being fairly new to a lot of Captivate and I have looked at Audio options and am struggling a bit. I want to add Audio to just ten or eleven slides of  the 100 odd in my project. If I add to my project audio as background audio it plays over everything. I see the button to stop it but it appears to be per slide and that seems crazy when I only want it on a  small percentage of the project. I also see I can add audio to individual slides but then the audio stops as the slide pauses which when doing a quiz just doesnt work. Does anyone know if and if so how I can audio to play over just these ten slides without the playing of the music being affected by the playhead. I would have thought multiple audio sources as background music must be something lots of peopel want and use. It cant just be me? Any help woudl be massively appreciated.
    Thanks in advance
    Jay

    Huh. I could have sworn I'd done it before, but I just tried in 5.5 and a 6.0 trial, and the audio section in the properties panel completely disappears when I select mutliple slides... Strange.
    It's a shame you had to go through such a long project slide by slide, Jay; I feel your pain. I'm not sure what else to suggest for future projects if that method doesn't work...
    If your project doesn't have any other audio, you could perhaps mute the project audio on the slides that you don't want background audio (the Action section in properties allows you to set an "on enter" action when you have mutliple slides selected). Or if you have audio on all your slides but the background audio slides, you could configure the background audio when importing to have 0% volume on slides with audio. But those are two rather specific cases.

  • Can't get Audio to play through when importing using iMovie '09

    Anyone know how to get audio to work when importing DV footage into iMovie '09.
    It used to work fine in iMovie HD. Any ideas??
    Yours sincerely,
    Anthony
    Irish MacUser & MacAddict

    I've just spent a while trying to figure this out ...
    I used this feature (monitoring audio on import) all the time in previous versions of iMovie ...
    Kind of essential I think ...
    Now we have a new 'feature' in iMovie where you can't monitor audio during import.
    Wouldn't it be nice if Apple documented this somewhere (maybe on iMovie Help ...).
    I understand about hi-speed import from other (non DV) formats ...
    So why not just let the user hit the 'mute' button if they don't want to listen to audio on import ?
    Pretty simple - rather than having this somewhat arbitrary rule imposed on iMovie users ?
    The only way to monitor audio during import is to plug headphones into the camera itself.
    Which means we are wearing a thing with a wire attached - making the BT headset capability of the Mac somewhat redundant.
    Oh well ... one step forward, one step back.

  • I cannot get audio to play in the background of my menu

    iDVD - i am creating a menu for a dvd, i cannot get background music to play in the menu.
    PLEASE HELP!!!!
    P.S. i have followed the instructions on the manual of how to apply music in a menu. it still does not work.
    thank you

    If dragging the audio  track you want to use into the audio bin of the menu
    doesn't play try changing themes and then change back to the original theme and add the audio track again.
    OT

  • DW CS3: how to get audio to play in hot spot?

    I have tried in vain to get an audio file to play when clicking on a hot spot on a graphic.  It plays but it opens in a new window with a skin.  I want it to play while the graphic is displayed.  I tried target="-self" but it still goes to a new page.  Anybody know of a way to get around this?
    Thank you!
    Laura

    You don't need to go in the Environnement. In the Arrange window, use an Audio Instrument track, insert Ivory at the input and if the track is selected, you should hear it.

  • Help getting audio to play on my car kit

    I have a 8100 pearl and a clarion bluetooth system in my audi. I got the car from my brother and his curve works fine when its synched with the car audio system he makes and receives calls and he can play his music files over the car speakers. I synched up my pearl and i can only make and receive calls. I want to be able to paly my audio files from the media player over the car speakers the way my brother has it set up. I can hear my adio files for a second when i try to make a call. but then the call goes through and it stops. SO to recap. I have a clarion bluetooth system that is capable of playing music files from a curve but not from a pearl. BOth phones can make calls. How do i get my music to play on the car? I need some way to leave the phone open and constantly streaming the audi over blue tooh. i think i might be missing a file of some sort that lets me do that. or i have to change the options on my phone.

    Hey jamaicanman20 & welcome to the forums.
    The most likely source of your trouble is that your MacBook does not send out audio along with video. You may need a separate cable to transmit the audio to your TV.
    ~Lyssa

  • Need help getting audio to play

    I dragged two audio files to a page in my site, but all I get is a tiny, blue Quicktime symbol with no ability to play the files after I've published the site. I use my own domain name, not a .mac account.
    I've tried this twice - once with the files as they were, listed as mpegs, and another after converting those to mp3s. I get the same results each time.
    Any suggestions on what I need to fix? The site is at: http://LivinginRhyme.com. Audio is on *Radio show interviews.*

    Well, that's interesting. I've went and tried it again, and I can't access anything via Safari, but I now realize I can using Firefox (though, yeah, it takes way too long to load). What browser did you use?
    Is there anything I can do so this works with Safari - and any other browser someone may use?

  • Getting audio to play from powerbook to tv

    see we are trying to get a powerbook to play a dvd from the powerbook to a tv and so far so good except the audio for said dvd will not go from the powerbook to the tv. we were using that tiny s-video cable they give and rca cords and we even tried one headphone jack to rca cord (without the video extention) and still nothing. we need help, does anyone have an answer?
    powerbook g4 titanium   Mac OS X (10.4.8)  

    I do it with my Titanium a lot and mine has always worked. The only thing I can think of for the audio is do you plug it into the headphone jack on the left side by the pcmcia slot? The port on the back by the s-video port is audio in.
    Then go to System Preferences and open the Sound pane. When I plug a headphone jack to rca cord into the plug on the left, output will change from internal speakers to headphones.
    Shane

Maybe you are looking for

  • Spontaneous shut down and possible kernel problems?

    Hi, So I was using my macbook pro today (running OSX 10.8.2, bought spring 2010) and the screen froze. The screen image changed- it looked like someone ran thier fingers through a wet painting. I force restarted the computer with the power button and

  • Bug? - trouble with iPod menus

    I recently downloaded my first video podcasts, but I'm having some trouble playing them in my iPod. Although they are ok when played in iTunes, they didn't seem to be recognized as video by the iPod - at least when I selected them through the podcast

  • Japanese and Russian characters are not displayed properly

    I have a pdf file which has both russian and Japanese characters in it. Before I install Japanese font pack, the russian characters were displayed properly but for Japanese characters Junk characters are displayed. But once  I installed Japanese font

  • Entry at material G/L acoount at MIRO...

    there is one schedulling agrrement with item numner 20. looking at its order history i found out some points:- 1) for initial accounting docs created during MIRO, there was no entry at raw material stock G/L account. 2) in between there were two docu

  • Problems Selecting Items for Copy and Paste Acrobat 9

    Hi, I have a client who is using Acrobat 9. For some reason, he is no longer able to use the selection tool in any PDF's to copy out parts of his drawings. I've made sure the selection tools is active from the toolbar. Any help would be greatly appre