Getting Auto Play to Repeat Play

Hi Gang
I'm familiar with dropping a clip in the first box of the DVD Map which will create Auto PLay. But how do I get a clip to repeat itself?
Thanx
Mike

Go to iDVD's menu bar and under 'Advanced' select 'Loop movie.'

Similar Messages

  • From Cover Flow repeat / play album only?

    Is there a way to have iTunes play/repeat just an album when selected via Cover Flow?
    (It's probably just me not seeing the option.)
    When one selects an album via 'Grid View -> Albums' only that album and its songs get selected. That's exactly what I'd like to have when selecting the album via Cover Flow.
    However if that an album is selected via Cover Flow, this album and all songs following are listed.
    Playing the album ends up playing everything... Yet I'd only like to repeat-play that album.
    Checking/Unchecking all songs individually (even via shift-cmd) to select just the album songs for play is not my idea of a good solution.

    There are two ways I know, but one is clunky and the other could be very time-consuming to set up.
    1) Make sure all the tracks in your library are unchecked. Then, check only the tracks in the album you want to play. You can use Uncheck All to do the first part, and then select the album tracks, right-click on one of them and click Check Selected. Or you can click the checkmarks on individually. Then, if you select the first album track and click Play iTunes will play through all the tracks that are checked and then stop. I haven't tried doing this with repeat, but it should repeatedly play the album tracks in sequence.
    2) You could build a playlist for every album you want to play through. Then, to play the album play the playlist.
    Unfortunately, iTunes does not provide a "play album" control. Perhaps Apple sees playing albums through in this manner like CDs or (worse) vinyl LPs as hopelessly 20th Century and something to be discouraged?

  • How do i get my library to stop playing snippets of my songs and play the full song

    How do i get my itunes library to stop playing snippets and play full songs?

    The control for repeating a selection is available when the Music app is open and the iPhone is in the portrait position. There are three settings Off, repeat one song and repeat album or playlist. You change the setting by tapping the icon.
    OFF
    Repeat one song (current selection)
    Repeat album or playlist

  • RTMP video repeating (playing twice) while Captivate Slide paused. Anyone else seen this ?

    I have a project that is published as SCORM 1.2 with a bunch of RTMP videos served from CloudFront. I tend to set the Slide duration to 5 secs and the Buffer value to 3Secs and choose Auto-Play, Auto-Rewind Display for Rest of Slde, and select "Pause slide till end of video". These settings typically have worked fine but recently some of the videos are repeating (playing twice) while Captivate Slide paused. I've tried all sorts of combinations but it seems intermittent. I thought of not pausing the Slide and setting the slide duration to the video duration plus a little extra but am a little worried that if there is buffering that the Captivate presentation will go ahead before the video finishes. Could anyone shed any light ?
    Fergal

    yes, they are SWF 8 files, and i see them separately after i
    publish from captivate...is there a way to force them to embed (if
    thats better)? it seems like it kind of randomly decides which it
    wants to do.
    also, i do have the source files and i'll try that blank
    frame and let you know if that fixes anything. thanks!

  • Auto App on Google Play..

    All of us or some of one time or another is using our phones for Navigation Google just re-leased an App that helps more with Navigation..
    You can find more Via the link and Source Droid Life:
    http://www.droid-life.com/2015/03/19/google-pushes-official-android-auto-app-to-google-play/

    I take it the guy who started this thread is the developer of the app lol..
    I just purchased it on the google store and tried it, after about 5 mins of testing i hit the refund button
    Sorry but that app is pointless! the app image on the google store is very deceiving as the icons are not clear as they appear to be in the image for the app.
    The icons for each app you associate are very poor, i had a hard time figuring out which icon was for which app!!
    I also tried adding one program which was shazam hoping this would allow me to not only launch the program but also to start the shazaming process but no this was not to be.. so basically i would still have to get my phone out of my pocket inorder to hit the "Touch to Shazam" button on the app
    For the price this app is very poor and pointless as you would still have to access your phone in order to do something with the app once opened

  • Possible to burn CD that will play continuously (repeat)

    Through iTunes, I bought music that is supposed to calm my dog. I burned it to a CD that I intended to put in my CD player and have it play over and over while I am away from home. The first CD I burned stops when it gets to the end of the CD. I don't have a fancy CD player, just a simple portable Sony boombox. Is there is a way to burn the CD in iTunes so that it will keep playing over and over? Or is that a function (which I don't have) of the boombox? I was hoping someone had an answer so I don't blow my seven-burn limit on experiments.

    They'd be no way to get the CD itself to play on repeat just by burning it, you'd have to have a specific function on your CD player to play the CD on repeat. If you are going to play this CD a lot for your dog then maybe you should considering upgrading CD player, or just playing your burned CD in iTunes itself, as there is a function to play on repeat right in the program

  • Repeat Play Button

    Hi
    I am creating DVD and all is great. I have a very simple menu with buttons, the play button works fine. But I need to have a repeat play button so the client is able to play the video continually, to be played at expo's etc.
    I know it is really easy but I cant find a script that repeats the video, as well as play one time.
    Any help would be appreciated.
    PS not an editor but a cameraman so be gentle.
    Marcus
    iMac Intel   Mac OS X (10.4.8)  

    Hi Marcus:
    You can solve the problem using Stories with no need to make any script. I'll give some directions and you additionally can read this Stories Tutorial (from www.kenstone.net).
    You can creat Stories from your tracks, what means you can make like "dupplications" of your track o part of your track/s without really duplicating the disc space. That means that a story refers to your original track and let you play the same content in a different way/lenght. If you add markers to your track, you can create like "independent chapters" from each marker and pley them like independent tracks individually or a different order or whatever you want. You can create a Story with your full track using just the Start marker and use this story like a "copy" of your track i.e. to create a loop playback with it just setting the end Jump of the Story to itself.
    - Choose Extended View arrange (F2) the we'll see the same layout
    - Select your movie track
    - In the tool bar pick on Add Story
    - In the Graphical view double click in the Story
    - You'll see in the low part of your screen the Story panel with 2 sections: Track Markers in the left and Story Markers in the roght.
    - Pick (select) the start marker in the Track Markers panel and drag & drop it in the Story Markers panel. If your Track have more chapter markers, you must do the same with all of them to get the full track playback !
    - You must have all your track markers copied in the Story Markers panel (that's because you want the full track playback)
    - Now in the Inspector Window set the End Jump ti pint to the Story itself. This way you'll get loop playback.
    - Go to your Graphical View again and click in any empty gray space to get your disc properties in the Inspector.
    - In the remote control section check you hace set the Menu option to your main menu. To break the loop user must press menu in the remote control and go back to the main menu.
    You can add the Loop button to your menu pointing it to the new Story.
    Hope you understand the explanation . . . no matter you are a cameraman !! ;D
    And wellcome to the forum !
      Alberto

  • HT201272 When iTunes was upgraded to the lastest (11.0), many of of songs/music/audiobooks were deleted!  I tried syncing my phone to my computer to get them back, but many of those were deleted too!   How do I get my purchases back to play them???

    When iTunes was upgraded to the lastest (11.0), many of of songs/music/audiobooks were deleted!  I tried syncing my phone to my computer to get them back, but many of those were deleted too!   How do I get my purchases back to play them???
    It shows on iTunes SOME of my past purchases, but not all (looks like around 30-40% of purchases).    It shows on my apple id purchase history everything i have purchased; but in iTunes, some not all of these show up.    What does show up is kind of "greyed out", so NOTHING will actually play.   I have followed the steps in the iTunes support about how to redownload past purchases, but this dowsn't work, as the download button is also "greyed out". 
    I am extremly angry and upset about this issue.  Could someone please help / advise re how to fix????

    I'm hoping that this may be just a misunderstanding somewhere.
    Could you show an image showing these greyed out items?

  • How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

    How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

    It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop.  And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure  what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

  • All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

    All the CD's I have imported will not play. The only music that will play is cd's I have purchased from itunes. How can I get all my albums to play, please??

    iTunes Store- Transferring purchases from iOS device or iPod to a computer
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    How to dowload purchased music

  • How do I get rid of distortion when playing old CDs in iTunes?

    Yesterday I imported a fairly old CD into iTunes and was disappointed to find playback of the CD was so distorted it was impossible to listen to.
    Here are some facts:
    All my other music in iTunes still plays perfectly
    The CD plays perfectly in QuickTime Player on the same machine from the same drive, so it's not a hardware or CD problem
    A newer CD imported today into iTunes imported perfectly
    A bit of research on the web suggests it's to do with the fact that the CD was manufactured a long time ago - the date on the disk itself is 1987.
    I've upgraded to the latest version of iTunes, removed all iTunes plug-ins from my iMac (as instructed by one of the Apple iTunes troubleshooting pages) and I've also switched off Equalizer, Crossfade, Sound Enhancer and Sound Check, but none of these make any difference.
    Does anyone have any other suggestions? Is it something to do with the import settings? If so, can you tell me what they should be set to?
    Many thanks

    Thanks for your reply. Sorry I wasn't specific about this. I get distortion in iTunes when I play straight from this particular CD and when I import it. With QuickTime, I get no distortion when I play straight from the CD, but (I hadn't tried this before but I just gave it a go) I do get distortion when I play the .m4a file created by iTunes. So presumably it's something iTunes is doing when it processes the .aiff file from the CD.
    At the moment the import settings are:
    Import using: AAC Encoder
    Setting: High Quality (128 kbps)
    with the 'Use error correction...' box checked.
    I've never had to touch them before. Is there a better setting to use for importing early CDs?
    Thanks.

  • HT5731 I bought a full season of a TV show. I downloaded all episodes. When I go into my iTunes library, select the episodes I get a message of: This computer is already associated with an Apple ID. I can't for the life of me get the TV show to play.

    I bought a full season of a TV show. I downloaded all episodes, I went to my  iTunes library, selected the episode I wanted to watch. I got this message: This computer is already associated with an Apple ID. I can't for the life of me get the TV shows to play. I went on iTunes and when to my purchases. Clicked on the episodes and the same message popped up. How do I get these to play? I also see my download box with an error message saying it has paused the download. I click unpause and it just pauses again. I have been able to get one of the episodes to play once through, but now it gives me the same message.

    It's been months, so you may not care anymore, but you can't download songs from multiple Apple IDs over a 90 days period.  Sorry, it's not allowed for legal reasons.

  • How do I get a m4v video to play on my Mac Pro computer?

    How do I get a m4v video to play on my Mac Pro computer?

    Have you tried VLC? That can play virtually any media format.

  • How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm?  I have the app installed on my iPad and can't get it to play!

    How do I get the iTunes festival to play on my Apple TV in the evening, as I work during the day and can't watch it at 4:00pm?  I have the app installed on my iPad and can't get it to play!

    I haven't received an answer. I hope someone can answer this because it's an ongoing problem that I can't play some CDs on my MacBook Air (see my original post for the details). Anyone? Please? Thanks in advance!

  • How can I get my itunes purchases to play on any mp3 player?

    I can't get my itunes purchases to play on my other mp3 players.  I don't want to download these programs people suggest on the internet.
    And really, I shouldn't have to. If I've already paid for the music, why can't I put it on the device I choose?  There must be a way. Any help? BTW, I'm using Windows Vista, (yuk)

    You can put the music on any device you choose, as long as the device can play the format. Purchases from the iTunes Store are in industry-standard AAC format. If you want to use them on a player that can only handle MP3, you need to convert the tracks. See:
    http://support.apple.com/kb/HT1550
    Regards.

Maybe you are looking for