Getting back the review quiz-button

Hello,
Somehow I deleted the review quiz-button that is shown in the Quiz result-slide. How would I get it back? It happened a while back so Ctrl+Z is long gone .
As I can't add any new buttons in a question slide, I can't work it out that way either.
Any ideas?
Kind regards,
Patrik

Check if the option is enabled in Quiz settings:

Similar Messages

  • Can I control when the Review Quiz button appears?

    The project I'm working on uses the e-mail results function to send scores to a database.  After sending scores, the user needs to be able to review their answers.    The problem is I don't see a way to make the Review button's appearance dependent on another action (user clicking send e-mail).   If both buttons appear together, a user could review their answers, reload/take the lesson again to improve their score, and then send the report only if they did well. 
    So the question is:  Is there a way to control the Review Quiz button?
    I do have a workaround:  Make the Review button transparent and put an image of the button on the slide to appear 20 or 30 seconds into the slide, hopefully the user will have reported their answer before the review button appears.  But this is a trick and a savvy user might notice it. (Particularly since there are several lessons that they'll take.)
    Thanks for your help!
    Jenny N

    OK, limitation to the workaround. 
    It doesn't seem to matter where I put the "pause after" control on the slide, the slide pauses about half-way through the slide length.  So I have to make the slide length 2x the time I want before the pause (So for a 20 second pause, I had to set the slide length to 40 seconds).
    Hope this helps if anyone else tries something like this,
    Jenny N

  • Getting stuck in the Review Quiz option

    Hello,
    When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen it work at times and then not work in a later version of the file. Is there a setting that controls this? I don't want the user to have to go back to the outline slide and find the quiz results slide from there.
    Thanks for your help.
    Cristie Mullins

    Hello,
    When from the Quiz results slide, a user clicks the Review Quiz button, it lets the user click through the slides and review, but none of the buttons take the user back to the quiz results slide when they are done reveiwing the quiz. I've seen it work at times and then not work in a later version of the file. Is there a setting that controls this? I don't want the user to have to go back to the outline slide and find the quiz results slide from there.
    Thanks for your help.
    Cristie Mullins

  • Review Quiz button does not navigate to the first quiz question..

    Hi,
    so I have created an interactive software simulation guide for users of my organisation. At the end of this guide there is a quiz (multiple choice, true or false questions) with 15 slides. At the end of the quiz the results screen is displayed with the "Review Quiz" button. Clicking this navigates the user to slide 72/245 rather than the beginning of the quiz, the first question.
    How can this be fixed?!
    Many thanks,
    Achello

    You have an interactive object somewhere on that slide that is scored to be added to the quiz.
    Open the Advanced Interaction dialog (F9) and look for the object there.  Remove the score.

  • Captivate 3 - Continue and Review Quiz Button Not Working

    I have just published a SCORM course in Captivate. It works perfectly fine once I've uploaded it into the LMS except one small part. I've set up the quiz so each learner is required to pass the quiz in order to complete the module. At the end of the quiz, the results page appears with two buttons (Continue and Review Quiz). Those buttons don't work.
    I set up the quiz so that learners have 2 attempts to successfully complete it. If they're unsuccesful, the continue button should direct them to the beginning of the quiz so they could retake it. If they have successfully complete, the continue button should take them to the next slide. That's not working. For some reason, the continue button only works if the learner has failed the quiz. The Review Quiz button also doesn't work. I did select the option allowing them to do so. Can someone please help?

    Hi there
    Please send me a private E-Mail message to rstone75 (at) kc (dot) rr (dot) com and advise of the exact file name of the file you are linking to.
    I'll send you back a file that you can use to test and see if the link works.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!   What should I do?

    Some times when I press the home button to read my finger the screen becomes black and it shows the Apple logo, this take a few seconds to get back the screen and this has been happening even 3 or 4 times in a row!
    What should I do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • How do I get back the 'open new tab' button (+ sign at right end of tabs) in Firefox 4 ?

    How do I get back the 'open new tab' button (+ sign at right end of tabs) in Firefox 4 ? I realize there is a 'new tab' button at the right end of the toolbar but I like the new tab function placed next the tabs ?

    See also:
    *Tools > Options > Privacy > History: "Remember search and form history"
    *https://support.mozilla.org/kb/Form+autocomplete
    The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
    Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br />

  • I deleted my review quiz button!

    I deleted my review quiz button on accident...and now i can't get it back.  It is not giving me an option to undue.  I want the learners to be able to review their incorrect answers after taking the quiz.  How can I get it back?  Can i add my own?

    Check Quiz Preferences, Settings, and check 'Allow users to Review Quiz'. It is an embedded object with a very specific functionality, you will never be able to add a custom button that does the same.

  • How can we make the Retake Quiz button only appear when user reenters the course?

    In a Captivate 8 Quiz, we need to force the user to close the course (so attempts are captured by the LMS) from the Quiz Results page. The Retake Quiz button cannot show at this time. However, when the learner reenters the course from the LMS, the bookmarking brings the user to the Results page again. We need a Retake Quiz button to only show when the user reenters the course, not on Quiz completion. Disabling the bookmarking disables the reporting of attempts. Does anyone know a way to make that happen or a workaround?

    Have a look at my blog post:
    http://blog.lilybiri.com/review-only-incorrect-slides-captivate-6
    Lilybiri

  • How do I get back the capacity on my start up disk?

    I deleted about half of my startup disk capacity when I was trying to partition. I own a 128gb macbook pro late 2013 retina. How do I get back the capacity? The part I deleted had free space. My storage reads 30.64gb free of 60.24gb.

    Then here's my suggestion.
    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the version of OS X that you had installed.
    This will give you a whole new start on the SSD.

  • Get back the subscription fee

    I forgot to cancel my account auto recharge, auto recharge happended, I wann get back the money, how?
    I didn't use the new credit yet.

    Hi, Alizamani, and welcome to the Community,
    You may request a refund of your credit by contacting Skype Customer Service.  You can click on the blue type, which is a link to the instruction on how to have a refund processed, and here also is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How can I get back the space to type in web addresses when I click on safari.  it seems to have gone away??

    I am trying to find out how to get back the space  up top of window that appears when I click on safari.  I used to be able to type in web addresses and go to places but somehow I lost the space which was just above or just below gray space that show apple,  store,  mac,  ipod etc.  I am  78 & sometimes get confused.  any hep would be greatly appreciated.  I know I had my arrow on somewhere near that space and heard a sound and when I looked back at my puter that space was gone.  ???    any ideas,, Annette l

    When Safari is active, in the menu bar at the top of the screen, there's a menu labeled View. From that menu, select Show Toolbar. It's right at the top.

  • How can I get back the other version of itunes?

    It was much easier to use and way more confortable, How can I get back the other version of itunes? It was much easier to use and way more confortable
    I can't pass playlists from itunes to my i-pod, and the sthetic of the new itunes is not a good one.
    Could I get back an older version? those were easier to use, more simplier

    Apple wisely leaves a copy of iMovie version 9 installed in the Application folder when you download version 10.

  • How can I get back the Web Clip widget in Dashborad?

    Dear all,
    I accidentally deleted the Web Clip widget together with the Web Clip.wdg in Library/Widgets/ folder by AppCleaner some time ago. Now I cannot use this function to clip content in pages. I have the widget icon in Safari and can crop the webpage without problems, but after I did this action, nothing appeared or happened in the Dashboard since the original web clip widget file is gone.
    I would like to know where and how I can get back the Web Clip.wdg file so that I can perform the Web Clip function again?
    I just saw a user who posted a similar topic on Dec 28, 2008 and his/her problem is solved. I have this same problem like his/hers.
    I would appreciate if anyone can help me, thanks!

    Hi,
    Thank you very much for your help.
    I have tried to use Time Machine to get back the Web Clip but still couldn't, and very strange is when I click Time Machine, I can only choose Windows Applications as the back up disk but not Macintosh Applications, so I cannot restore anything from Macintosh applications.
    I think the best is if anyone has this widget on their Mac and can kindly send it to me by e-mail?
    I would appreciate it so much.

  • How can I get back the quality of ios 5.1.1 back to my iphones 4 and my ipad 2?

    How can I get back the quality of ios 5.1.1 back to my two iphones4 and my ipad2?
    Since more than 6 monthes I can't use
    * video for more than 5 minutes,
    * tv-streams for more than 5 minutes,
    * apple store updates in case of more than one update,
    * itunes download in case of more than one download object,
    * remote control
    * air play with appletv3
    without errors.
    On ios 6.x (incl. 6.1.2) all important apple media integration are just useless.

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

Maybe you are looking for

  • Problem in sending HTTP request to the server.

    Hi, i dveloped an ant script for sar deployment. i deployed a sar to my local soa server with ant script. it got deployed succesfully.. but when i try to deploy to a remote server, getting the below error.. "Problem in sending HTTP request to the ser

  • Why does my ipod only show an apple and wont start up

    Why does my Ipod only show an apple and wont do anything else>  And holding down the two buttons has done nothing!

  • Recording on CD pla

    I just bought Creative Lab Nano Plus. I should be able to dwonload songs fdrom CD player to the Creative Lab instead of the computer but have not been able to find out how to do it. It doesn't say how in the booklet that came with my Creative Lab and

  • How does s8_preload work in ld.config

    I'm Running solaris 8 in a solaris 10 zone. it appears that doing so makes /etc/ld/ld.config contain LD_PRELOAD=/usr/lib/secure/s8_preload.so.1. Unfortunately IBM's purify doesn't handle this very well. the recommended removing that file. I did that,

  • How Can I Uninstall Thinkvantage Password Manager?

    How can I uninstall or disable this without compromising my fingerprint reader? Failing that, how can I remove an application so Password Manager no longer tries to "help" me with its password?