Getting Blank EULA (License Agreement Screens) when I try to edit or when I close Acrobat Pro 11 on Mac. Have done all the updates to latest CC.

I have been trying to get Acrobat Pro 11 installed and operating for the last two days with this error. I have unistalled and re-installed. Updated to the latest CC app, to no avail.
I see this was an error in 2012 but there is no options in the new CC Apps to "disable" then "re-enable" the app.
Adobe, how do I get this working properly ?

Not just on editing or quoting . Comes up after ~30 seconds. Jusot asks me to accept the license agreement but there is nothing in the main part of the form. And quits out when I "Accept". TOTALLY UNUSABLE!
I'm resorting to reading PDF's with Preview!
Am running MacOSX 10.9.3.
The other Adobe apps I installed (Photoshop, Premier) seem to work fine.
Common Adobe give me a solution, and just don;t tell me re-install I;ve tried that already!

Similar Messages

The itunes store app on the iphone 4s does not appear on the iphone at all so i can't purchase any media. I have done all the updates on the iphone and in itunes. This happened right after i did the latest iphone update. HOW CAN I GET THE ITUNES BACK?

after doing all the latest updates to both my iphone 4s and itunes the itunes store app on the iphone just dissapeared. Now i can't purchase any media. How can i get itunes store app back on my iphone?

If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > iTunes being set 'off' ?

Hi, I have an iMac (24-inch Mid 2007) that hangs especially when browsing in safari, and letters typed take ages to show. I have done all the usual things with disk doctor etc. One thing I have noticed is that if I log in as a guest the computer work

Hi my iMac hangs when browsing and letters typed from my key board take ages to show and the ability to scroll in safari is difficult almost non existent. However when I log in as a Guest my computer acts fine. I have cleaned caches verified disk etc to no avail.
Les

Hi my iMac hangs when browsing and letters typed from my key board take ages to show and the ability to scroll in safari is difficult almost non existent. However when I log in as a Guest my computer acts fine. I have cleaned caches verified disk etc to no avail.
Les

I have several songs that I purchased. They show in my library, but won't play on any of my devices - including my computer. I keep getting the "authorize the computer" prompt. My computer is authorized! I have done all the troubleshoots that are availabl

I have several songs that I purchased. They show in my library, but won't play on any of my devices - including my computer. I keep getting the "authorize the computer" prompt. My computer is authorized! I have done all the troubleshoots that are available. How do I get my computer and other devices to be able to play these songs? Almost all my songs play except for about 8 or 9.

If only some of the songs on an album are giving you the authorisation message, that suggests those song files are damaged.
If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

When i click on edit link a popup has to open and i have to show the inform

Hi all,
i have an arraylist with instances of Sectionbean.java class.
I created a panelgroup layout to display all the variable inside Sectionbean.java class. and a link called "edit".
i kept this panelgrouplayout as a child for iterator .
out put is like this
1 aaaa abc edit
2 bbb abc edit
3 ccc abc edit
I am getting all the values and rendering in the ui properly like above.
here when i click on edit link a popup has to open and i have to show the information related to the selected edit link in that row.
can anyone give me suggistion that how to sove this .

in the command link.. create a clientAttribute settign the value.. and use it in the popup using the source
<af:commandLink id="cl2">
<af:outputText value="#{row.Title}"
id="outputText1"/>
<af:clientAttribute name="title"
value="#{row.Title}"/>
<af:showPopupBehavior popupId="::p1"/>
</af:commandLink>
<af:popup id="p1" contentDelivery="lazyUncached" eventContext="launcher"
launcherVar="source">
<af:dialog id="d1" type="ok" title="Popup" contentWidth="300"
contentHeight="200">
<af:panelGroupLayout id="pgl4" layout="vertical">
</af:panelGroupLayout>
</af:dialog>
<af:setPropertyListener from="#{source.attributes.Title}"
to="#{pageFlowScope.Bean.contentId}"
type="popupFetch"/>
</af:popup>
here the client attribute is set with the row.Title and later in the popup we are fetching the same using.. source.attributes.Title

MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

TA48312 I NEED TO UPGRADE FROM 10.5.8 TO USE MY ITUNES MATCH, WHAT DO I NEED TO DO TO DO THIS? I HAVE PAID FOR IT AND HAVE DONE ALL THE NECESSARY TASKS TO GET ICLOUD UP BUT MY ITUNES WILL NOT WORK?

I NEED TO UPGRADE FROM 10.5.8 TO USE MY ITUNES MATCH, WHAT DO I NEED TO DO TO DO THIS? I HAVE PAID FOR IT AND HAVE DONE ALL THE NECESSARY TASKS TO GET ICLOUD UP BUT MY ITUNES WILL NOT WORK?

jbrie8210 wrote:
I NEED TO UPGRADE FROM 10.5.8 ...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
Be sure to make a Backup of your Current System Before Upgrading...
Next...
Upgrade to Mountain Lion
With Regard to ML... Check here for compatibility of 3rd party Software you may be using... Also note that Rosetta is no longer supported in Lion and Mountain Lion...
http://roaringapps.com/apps:table
You should also consider more RAM... Get the Maximum you can for your Mac...
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...

Have done all the trouble shooting connection but my iPad still can not get wifi connection

i have done all the trouble shooting connection but mu iPAd still can not get wifi connection

Hi Jo,
Each router is a little different but here are the basics: login to the router using the administrator account, should have that info from the installer, and then you should find something like security settings, or it may be advanced security. There will be a setting to the effect of limiting access, or it may say allow Mac address authentication, or admit the Mac addresses in the table...if that is switched on, you can just switch it off and that will allow any wireless device to attach. If you want to keep it on, then you have to enter the Mac address for the device you want to use for access. In the case of the iPad, go to Settings > General > About > WiFi Address (another way of saying Mac address). Enter that very long sequence in the router's Mac address acceptance table and that should take care of things.
Using the Mac address does not change any of the email settings, just limits attaching to the router in the first place.
If you are already getting email, you must be attaching already so this should not be an issue. If you are having email issues, such as receive but not send, you may not have the outgoing server set correctly: Settings > Mail > Account > Outgoing server name (usually an SMTP server) and you may have to go to the advanced settings to enter the outgoing password (normally the same as the account/incoming password) and then check to see if SSL is ON or OFF...most common email services say to set to OFF.

When I try to edit preferences iTunes for Windows locks up. I have only one user. This is true even after a reboot.

When I try to edit preferences iTunes for Windows locks up. I have only one user. This is true even after a reboot.

Hello MF7642,
Thank you for contacting Apple Support Communities.
You can use this article to troubleshoot your issues with iTunes.
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Regards,
Jeff D.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.

My visual voice mail is not working..i have done all the steps that I have seen on here to do. When I call the voice mail it says that there is not a box set up and I need to contact my system administrator.

I have had voice mail set up on my phone for 10 years. When I did the last iOS update before 7 I guess it wiped out my voice mail. Can I not set it up myself? I haven't changed my message in years.

When I try to purchase new app or update apps on iPad it tells me user name is disabled. I have done all the "tricks" from the tech support on phone and still not working.

When I try to purchase new app or update apps on iPad it tells me user name is disabled. I have done all the "tricks" from the tech support on phone and still not working.

Contact Apple Support
https://expresslane.apple.com/GetproductgroupList.action
Apple ID: "This Apple ID has been disabled for security reasons" alert appears
http://support.apple.com/kb/ts2446
 Cheers, Tom

How do I get rid of license agreement screen?

Everytime I try to access photoshop CC the license agreement screen pops up. No matter how many times I press accept it still continues to pop up. It worked well after I installed it, but it just now started acting like this.

Hi Breanna,
Normally accepting the license agreement is a one time process. Being unable to save it successfully may be related to a permissions restriction/issue on your system.
You might try right-click Run and Admin when launching Photoshop (on Windows) and then accepting, test with your anti-virus software disabled temporarily, or see if the same thing happens in a newly created user account with administrative rights.
Here are instructions for creating a new user if you need them:
Windows 7/8
http://windows.microsoft.com/en-IN/windows7/Create-a-user-account
http://social.technet.microsoft.com/wiki/contents/articles/create-a-new-user-account-in-wi ndows-7.aspx
Mac
10.9 - http://support.apple.com/kb/PH14411
10.10 - http://support.apple.com/kb/PH18891
- Dave

HT4352 I have done all the above but when I turn on the TV & go to computer the movies it still saying that the home sharing is not connected.

I have follow all the settings for the home sharing but when I turn on the TV & go to computer then movies it still saying that the home sharing is not connected.

See
http://support.apple.com/kb/ts2972

HT4623 My iPad mini says that there is a connection error when trying to go on facetime and I have done all the troubleshooting

I can't get on facetime. It says there is there is a connection error, and I have tried all the troubleshooting.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Getting Blank EULA (License Agreement Screens) when I try to edit or when I close Acrobat Pro 11 on Mac. Have done all the updates to latest CC.

Similar Messages

Maybe you are looking for