Getting blue screen when i try to do a system recovery

hi im having problems with my hp compaq presario cq60 i currently have windows vista running on it right now and it was working fine then the other day i was on a website doing something then all my pages froze on me and i went to shut it down and restart then it came up a blue screen now and i tried to get the system recovery to come up but it wont come up it just stays on the blue screen and never brings up the menu so if someone can please help me i would appreciate it im trying to avoid having to get it repaired cause i cant afford to renew my warranty right now

Thelastdon315,
Have a look at this document and use the section listed “Starting the recovery from the Windows Vista desktop”, and see if you are able to access it that way.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Similar Messages

  • I get a blue screen when I try to boot into the recovery mode

    My computer froze and refuses to boot. When I try to boot from a recovery partition (both on the main hard drive and an installer on on an external hard drive) the screen turns blue (sometimes with vertical stripes). Any suggestions as to what's causing this. It will be another week before I can go to a Genius Bar.

    My computer froze and refuses to boot. When I try to boot from a recovery partition (both on the main hard drive and an installer on on an external hard drive) the screen turns blue (sometimes with vertical stripes). Any suggestions as to what's causing this. It will be another week before I can go to a Genius Bar.

  • Getting blank screen when i try to open workspace first time

    Hi All,
    I have installed hyperion 11.1.2.2 version with Oracle 11.2.0.1 database. Installation and configuration completed successfully.
    Operating System: Windows Server 2008 64 bit
    When i try to open workspace, it is showing blank page in the IE 10
    error msg:
    <May 7, 2013 4:29:30 AM MST> <Notice> <WebLogicServer> <BEA-000365> <Server stat
    e changed to RUNNING>
    <May 7, 2013 4:29:30 AM MST> <Notice> <WebLogicServer> <BEA-000360> <Server star
    ted in RUNNING mode>
    *<May 7, 2013 4:29:30 AM MST> <Warning> <Log Management> <BEA-170011> <The LogBro*
    adcaster on this server failed to broadcast log messages to the admin server. Th
    e Admin server may not be running. Message broadcasts to the admin server will b
    e disabled.>
    <May 7, 2013 4:37:20 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:61,983 during the configur
    ed idle timeout of 5 secs>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090171> <Loading the ident
    ity certificate and private key stored under the alias DemoIdentity from the jks
    keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090169> <Loading trusted c
    ertificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\
    DemoTrust.jks.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090169> <Loading trusted c
    ertificates from the jks keystore file C:\Oracle\MIDDLE~1\JROCKI~1\jre\lib\secur
    ity\cacerts.>
    <May 7, 2013 4:38:08 AM MST> <Alert> <Security> <BEA-090152> <Demo trusted CA ce
    rtificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyStat
    e, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: Sun RSA public key, 512 bits
    modulus: 955019287786924425883848070339045601504642537525227827919067306354412
    25109254821799633292360521460473564159575876280112824847724589839778989962768154
    40753
    public exponent: 65537
    Validity: [From: Thu Mar 21 13:12:27 MST 2002,
                   To: Tue Mar 22 13:12:27 MST 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState
    , C=US
    SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates sig
    ned by the demo trusted CA.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Ent
    rust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entru
    st\, Inc.,C=US". The loading of the trusted certificate list raised a certificat
    e parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2
    .840.113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - F
    or authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US".
    The loading of the trusted certificate list raised a certificate parsing except
    ion PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.
    11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=
    T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate
    list raised a certificate parsing exception PKIX: Unsupported OID in the Algori
    thmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=
    T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate
    list raised a certificate parsing exception PKIX: Unsupported OID in the Algori
    thmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The
    loading of the trusted certificate list raised a certificate parsing exception P
    KIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\
    ,LTD.,C=JP". The loading of the trusted certificate list raised a certificate pa
    rsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840
    .113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 20
    08 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSig
    n\, Inc.,C=US". The loading of the trusted certificate list raised a certificate
    parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.
    840.113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading
    of the trusted certificate list raised a certificate parsing exception PKIX: Uns
    upported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 7, 2013 4:38:08 AM MST> <Notice> <Security> <BEA-090898> <Ignoring the trus
    ted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008
    GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of t
    he trusted certificate list raised a certificate parsing exception PKIX: Unsuppo
    rted OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <May 7, 2013 4:39:00 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:62,088 during the configur
    ed idle timeout of 5 secs>
    <May 7, 2013 4:42:50 AM MST> <Warning> <Socket> <BEA-000449> <Closing socket as
    no data read from it on fe80:0:0:0:21c:42ff:fe6e:b382:62,321 during the configur
    ed idle timeout of 5 secs>
    Thanks,
    mady
    Edited by: mady on May 7, 2013 5:27 PM

    Did you configure the web server as the last part of foundation services? You could always get a patch for IE support but the blank screen always appears if the services wasn't started up correctly or if the web server wasn't configured lastly after any configuration change.
    About the Weblogic here's where you can get more info about your error message: http://docs.oracle.com/cd/E12839_01/apirefs.1111/e14397/LogMgmt.html
    "BEA-170011
    Warning: The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.
    Description
    The LogBroadCaster on the managed server could not find a reference to the DomainLogHandler on the admin server. Messages from this server will not be logged in the domain log.
    Cause
    The managed server might not be able to reach the admin server. One of the possible causes could be due to the admin server being shutdown.
    Action
    To fix this problem, inspect the exception stack trace, correct the problem. If the admin server is shutdown, restart it to resume normal log broadcasting to the domain."
    Just my 2cents...

  • IMovie 09 - get blue screen when trying to import from camera

    I have used previous versions of iMovie without incident. Today when I tried to import some footage from my Sony TRV950 via firewire, all I get is a blue screen with the counter rolling but no import.
    I can see the footage playing on my camera.
    My camera is listed as DV-VCR (DV) in the import window.
    Any tips?

    I had the same issue with the blue screen. To resolve it I quit imovie and unplugged firewire cable. Started imovie the plugged in firewire. Created a new event, went to import, clicked play, selected add to event( the one I just created)
    and it started playing and imported fine.
    Hope that helps
    Jamie

  • MacBook Pro gives a blue screen when I try to start from a bootable usb stick

    Since yeasterday my MacBook Pro is refusing to startup. The starup proccess goes like Apple Logo, Spinning wheel, white dispaly and stops - freezes there.
    So I made a bootable usb stick and tried to boot from there so to be able to do a format and repair it. Also the recovery HD wont boot...
    When I start my Macbook Pro from the bootable usb stick it gives me a blue screen. I have tried to reset PRAM but nothing.
    I am attaching 2 images of the blue screen.
    Please help...!!!

    Guys thank you for your replies. I could boot in any way... I tried several things.
    Finally a friend managed to give me an Apple Hardware Test and it came with these results... Any ideas ?

  • HT1491 get black screen when I try to search for books by category         all other functions ok

    get black whebtrying to search for books by category

    Hello there, mrecon.
    First you may try closing out of the iTunes store by following the steps in this Knowledge Base article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If the issue persists, then you may want to do the steps above again and then restart/reset your iPad using these steps:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Get white screen when I try to unlock after first one after startup

    The phone is still responsive when this happens, such as when I plug it in , or reset it. But either way, it's tough to use something when you cannot see what you are doing. I've tried restoring several times, to no avail.

    DId you sign out of the App Store, then back in with your new password?

  • Why does my computer blue screen when I try to edit photographs?

    Below is the exact error message I get.
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.768.3
      Locale ID:    1033
    Additional information about the problem:
      BCCode:    101
      BCP1:    0000000000000031
      BCP2:    0000000000000000
      BCP3:    FFFFF88003165180
      BCP4:    0000000000000002
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    768_1
    Files that help describe the problem:
      C:\Windows\Minidump\050315-22869-01.dmp
      C:\Users\Calvin\AppData\Local\Temp\WER-34928-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Widows 7 works well for me with many versions of Photoshop.  I would suggest the you make sure you have installed all the latest Device Drivers for all the devices you have on your machine the Photoshop may use.  Display driver, Mouse driver, keyboard driver, Tablet driver, Printer driver and also make sure you do not have two different display adapters enabled on you system.

  • Blue screen when installing Win XP Home

    Getting blue screen when installing Win XP Home on 915P Neo2 Platinum motherboard with the on-board LAN port enabled! Any idea to fix this?

    disable onboard lan then reneable it after you get xp installed see if that works.  try to get the latest bios for your motherboard to.

  • Lenovo thinkpad L412 blue screen when i move my laptop

    i am using lenovo thinkpad L412 laptop
    my screen gets blue screen when i move my laptop. if i dont move it it just works fine.
    i tried to update my stytem for latest driver and software but still problem doesnt go away.
    i also run the diagnostic test for hardware but it doesnt show any problem.

    You can't have a blue screen in bios, blue screens are a "feature" of Windows OS.
    What is the error code mentioned on the blue screen? This could give information about the nature of the problem.
    You could also try to boot from a Linux Live cd distribution, such as Ubuntu for example (no need to install it, just boot from it). If the Live cd works well then most probably this is not a hardware problem but drivers related as somebody already suggested.
    Please tell us the machine type of your laptop, the operating system used and any hardware changes you have made (added memory, changed hard disk etc). Give as much details as possible!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • Windows Blue Screen - when trying to re-sync an IPOD after doing 5 R's

    My windows based Itunes failed to recognize my ipod, so I trouble shooted and finally ended up doing the 5 R's.
    This resulted in a "Blank Ipod" (after restore).
    I was able to successfully get Itunes to recognize my ipod after the restore. That is when a "major problem" occurred.
    When my 37 gigs of MP3s on my PC attempt to automatically update onto my "blank ipod", my system crashes giving me the dreaded windows BLUE SCREEN! The error messgae indicates that a physical memory dump occurred and the system shuts down.
    I figure it has something to do with all of those gigs trying to update onto the ipod. SO, I start to manually transfer (drag and drop) about 100 mp3s at a time onto the ipod within itunes. It still crashed after the 3rd batch of 100 mp3s.
    Has anyone experienced this? Does it have anything to do with Mirosoft's newest IE vunerability? I use Firefox usually, but sometimes HAVE to use IE. What can I do?
    This really *****.
    thanks for your help.
    Zeppy
    Dell Dimension Windows XP

    hi zeppy!
    hmmmmmm. a 0x7E? that's not the most commonly reported BSOD code here.
    but the MS KB seemed to have at least one clue for us.
    (1) sometimes people can get blue screens when they plug in an ipod if their FireWire, USB, or dock has gone bad. i see from that STOP message resource that the 0x7E can be associated with dodgy USB.
    by way of tracking down that possibility, do you still get the BSOD if you connect to a different port? (or, if you've got a dock, connect directly to a port instead?)
    (2) on general principles, we'd better check for malware. download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer online scans, run those as well. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
    (3) especially if you've recently installed any new hardware on your PC, head into Device Manager to check to see if there's any alert/warning messages showing up next to any of your devices. if you see any, what do they say?
    (4) let's also let's also capture a minidump of the crash and send it to the Discussions Hosts, so they can throw it over the fence for the Apple engineers to analyze.
    To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
    And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
    love, b

  • Downloaded Lightroom 6 and when my catalog got pulled in i can see the pictures, but when i try to go into develop mode i geta blue screen... how do i get rid of this??

    I need to know how to get lightroom 6 wokring properly and not give me a blue screen when i use develop mode

    Try updating the GPU drivers from the manufacturers website, in the meantime disable GPU processing and Develop module will show.
    See: Adobe Photoshop Lightroom Help | Lightroom Graphics Processor Acceleration (GPU) Troubleshooting & FAQ

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • What is missing when I get a blank white screen when I try to Access some web sites?

    On some web sites, I get a blank white screen when I try to access them.

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please  help me?

    when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please  help me?

    Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
    It looks like iPhoto has lost the connection between the thumbnails and the original image files.
    This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
    Try first to rebuild your iPhoto Library:
    If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
    Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
    Select "rebuild" from the first aid panel.  This may take a while for a large library.
    Can you now see your photos again?
    If not, rebuild the library with iPhoto Library manager as described by Old Toad:            Re: iphoto crashed

Maybe you are looking for