Getting Bluetooth to forget about my PS3 Sixaxis controller

I have a problem that is driving me absolutely nuts.
I have a MBP with Snow Leopard, all updates. I have a Mighty Mouse, so obviously I have Bluetooth enabled.
I also have a PS3, which uses Bluetooth for its Sixaxis controllers. This issue has to do with the MBP "stealing" the controller from the PS3 when someone wants to play a game with it. And this happens EVERY time. The controller gets paired with the MBP, and I have to plug the controller into the PS3 via USB to even get it to recognize it again, which defeats the purpose of having Bluetooth in the first place.
This is driving me nuts. I remove the contoller from the device list in the Bluetooth preferences, but it gets paired with it again the next time I turn it on.
Is there any way to force MacOS to PERMANENTLY forget about a Bluetooth device?
Message was edited by: TheIcemanCometh

I think I solved it by hitting the "PS" button.

Similar Messages

[solved]PS3 Sixaxis Controller USB only

There are plenty of software and howtos to use the PS3 sixaxis controller with bluetooth, but I don't have bluetooth on my desktop.
Dmesg shows that the controller is registering:
[100186.397697] usb 7-5: new full-speed USB device number 4 using ohci_hcd
[100186.659669] sony 0003:054C:0268.0007: Fixing up Sony Sixaxis report descriptor
[100186.703911] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:13.0/usb7/7-5/7-5:1.0/input/input7
[100186.704469] sony 0003:054C:0268.0007: input,hiddev0,hidraw4: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:13.0-5/input0
I think I have the appropriate modules loaded:
lsmod | grep -i usb
usb_storage 47511 0
usblp 13010 0
usbhid 41820 1 hid_logitech_dj
hid 87322 4 hid_sony,hid_generic,usbhid,hid_logitech_dj
scsi_mod 131599 4 usb_storage,libata,sd_mod,sr_mod
usbcore 175663 8 usblp,usb_storage,hid_sony,ohci_hcd,ehci_hcd,ehci_pci,usbhid,xhci_hcd
usb_common 954 1 usbcore
$ lsmod | grep -i joydev
joydev 9695 0
When I cat /dev/input/js0, I don't get the cascade of chaotic characters I expect when I hit the buttons and move the axes. Instead, I get just two of those strange characters you get when you cat a binary file, and they do not change when I play with the controller. I installed jstest and jstest-gtk, and messed around with them. jstest-gtk knows that I have a sixaxis controller plugged in, but I see no evidence that it is receiving input from the controller when I mess around with it, including when I use the "calibrate" feature; all that happens is that once I complete the "wizard", all values go to 0. The reason I am doing this is of course steam, and Steam Big Picture does not respond to the controller either. jscal -c /dev/input/js0 shows no evidence of receiving input from the controller. Is there some kernel module that I'm missing? Googling sixaxis kernel module doesn't reveal anything to me.
Thanks in advance.
Last edited by Convergence (2013-05-11 20:53:10)

I think I solved it by hitting the "PS" button.

I use Firefox 'Most Visited' for easy access to the websites I use every day. I inadvertently clicked 'Forget About This Site' on a page that I need. That page is gone, apparently permanently, from my 'Most Visted' list. How can I get it back?

I use Firefox 'Most Visited' to access websites I use many times every day. I inadvertently clicked 'Forget About This Site' on a page listing that I need. That page is gone, apparently permanently, from my 'Most Visited' list. No matter how many times I re-visit the page, it will not show up on 'Most Visited'. How can I get it back? Thanks!

Most Visited is an automatically generated list that shows sites that you've visited.<br />
If you delete the history of a site then you have with a visit count of zero.<br />
To make that site reappear in that you you will have to visit that site often enough to make the visit count match the other sites in that list or clear the history from other sites in that list.
You can make the Visit Count column visible in the History Manager to see how many times you've visit sites.
*http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

I accidently hit "forget about this site" in my history, and it deleted all related sites to it. i desperately need to get them back. how do i retrieve the forgotten or deleted sites from history in firefox4 ?

i use the firefox4, and when i went to my history, i right clicked to delete a certain site, and accidentally hit the last option; (forget about this site) which deleted all the similar sites to the one i clicked! i.e. if it were facebook site, all facebook sites were gone..
'''how do i retrieve the sites i lost in history?'''

Tony, thnx for the prompt response,,
however, i didn't delete. i hit the below option which reads; "forget about this site" which is the last item in the list that appears when you right click any site in history.
i was told there are open source programs that can retrieve it.
'''how sure r u that they cannot be recovered?!'''

Can i get Bluetooth for my ipod touch 2G..????

Is there any possibility if i can get Bluetooth for my ipod touch 2G..????

i'm very much thankful to u about this.. can u tel me whether there is an availability of new panels for ipod touch 2G..???? and one more quest.. its d last.. can we fix a camera for it.??? there is a rumour that we can.. so i'm asking..

How do I get iTunes to forget an iPhone?

I have three log-ins for my Mac (10.9.2): myself, my wife, and root. Months ago I was logged in to my wife's account to do some updates and stuff on my wife's iPhone, but I accidentally plugged my phone into the cable. It messed up my phone with her content, but it was fixable because everything was nicely backed up. But ever since then something annoying is happening: When I'm logged in to my wife's account and iTunes is open, iTunes mounts both my wife's iPhone and mine over the house wifi and tries to sync both. I quickly eject my phone, but I'd like iTunes to forget about my phone when logged in to my wife's account. (When logged in to my account, my wife's phone is not mounted.) In iTunes, the Devices Preference pane has the option to "prevent syncing automatically" enabled, yet syncing always starts nonetheless.
Anyone know how I can get my wife's iTunes to forget or ignore my phone?

Well yes, but the problem will be that my phone will start syncing as soon as it's mounted. I may turn out I will have to use this solution, then simply put it back on my own account and wipe/restore it.

How do i get bluetooth

i do i get bluetooth on my imac if is not already on here...

Arlene,
The only intel Mac where bluetooth was optional was the Mac Pro. You can check by click the  in the menubar, select "about this mac" and then "more info...". In the resulting System Profiler report, look in the left column for bluetooth and click it. This will tell you if you have bluetooth installed.
If it's installed, you can set the controlling options in System Preferences > Bluetooth.
Regards,
Captfred

Getting an error message about UID: Unowned UIDs for ImageFrame CANNOT SAVE FILE

Getting an error message about UID: Unowned UIDs for ImageFrame CANNOT SAVE FILE

Hi,
Could you please share your .muse file with us to investigate? Please email it to [email protected] If your file is greater than 20MB you can use something like Adobe SendNow or SendThisFile or Dropbox. Please do not forget to mention the link to this forum thread in your e-mail so that we can identify the file.
Regards
Vivek

HT1430 I do a hard reset of my iPhone every so often because I feel it improves performance, but Apple states 'Reset ONLY if the device is not responding'. Forget about my OCD on this, but is their any reason my Apple stresses the ONLY DO THIS if not resp

I do a hard reset of my iPhone every so often because I feel it improves performance, but Apple states 'Reset ONLY if the device is not responding'. Forget about my OCD on this, but is their any reason my Apple stresses the ONLY DO THIS if not responding?

deggie wrote:
Because it is more far-reaching than just turning the phone off and back on, it completely takes out anything in volatile memory, etc. I do reset mine if I notice problems such as no email coming in, text message issues, etc. but the same thing could probably be accomplished by just turning the phone off and on in your case.
Thanks deggie, I think I get it now. Volatile memory (I had to look it up!) is memory that is lost on loss of power, so it's as you say... I'm not achieving anything on a normally functioning iPhone as on-off achieves the same result!... Thanks

[Howto] Sixaxis controller and bluetooth.

Hello.
I have just created a new package for aur, its name is qtsixa. It's my first package.
You can use some sixaxis controller with one bluetooth dongle. For me, I can use 4 sixaxis controller simultaneously.
Aur link : here
Official website : here
Features : http://qtsixa.sourceforge.net/features.html
Current version : 1.1.1.
Current aur version : 1.1.1 (only for 64bits for the moment, need to modificate PKGBUILD)
I will update the package today. [OK]
To install, just use :
yaourt -S qtsixa
Howto use : (2 steps)
First launch as root sixad daemon :
# /etc/rc.d/sixad start
Then launch qtsixa.
You must connect sixaxis controller with an USB cable, and to pair (Tasks menu / Pairing Sixaxis ), disconnect USB, then press PS button to use it with bluetooth.
Enjoy.
Last edited by yimm (2009-12-02 12:19:21)

schuay wrote:Got the new 1.2.0 version working building from source for i686 and x86_64. Take a look at it - the install seems a bit hackish, but I couldn't find a proper way to install without copying all required files manually.
Yeah, that's why I use DEB pkg to build an arch PKG.
But I will check your PKGBUILD, and if all it's good, i will update it on AUR. Thanks
- on start, DAEMON is called with '--start'
- removed nonexistant debian function 'status_of_proc'
About this, I will speak to the main developper to create a patch. But all works by using init-functions from debian (see my actually pkgbuild.)
marinftw wrote:Hi, how can I make this work on 32 bit Arch???
You can modificate my PKDBUILD to change these lines
deb2targz sixad_"$pkgver"-falktx0_amd64.deb || return 1
tar -xzf sixad_"$pkgver"-falktx0_amd64.tar.gz || return 1
to 32 bits. All is in the downloaded zip.
Last edited by yimm (2010-01-18 14:53:55)

Re: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't forget about the regular expression potential

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

Namburi,
When you said you used the Reg Exp tool, did you use it only as
preconfigured by the iMT migrate application wizard?
Because the default configuration of the regular expression tool will only
target the files in your ND project directories. If you wish to target
classes outside of the normal directory scope, you have to either modify the
"Source Directory" property OR create another instance of the regular
expression tool. See the "Tool" menu in the iMT to create additional tool
instances which can each be configured to target different sets of files
using different sets of rules.
Usually, I utilize 3 different sets of rules files on a given migration:
spider2jato.xml
these are the generic conversion rules (but includes the optimized rules for
ViewBean and Model based code, i.e. these rules do not utilize the
RequestManager since it is not needed for code running inside the ViewBean
or Model classes)
I run these rules against all files.
See the file download section of this forum for periodic updates to these
rules.
nonProjectFileRules.xml
these include rules that add the necessary
RequestManager.getRequestContext(). etc prefixes to many of the common
calls.
I run these rules against user module and any other classes that do not are
not ModuleServlet, ContainerView, or Model classes.
appXRules.xml
these rules include application specific changes that I discover while
working on the project. A common thing here is changing import statements
(since the migration tool moves ND project code into different jato
packaging structure, you sometime need to adjust imports in non-project
classes that previously imported ND project specific packages)
So you see, you are not limited to one set of rules at all. Just be careful
to keep track of your backups (the regexp tool provides several options in
its Expert Properties related to back up strategies).
----- Original Message -----
From: <vnamboori@y...>
Sent: Wednesday, August 08, 2001 6:08 AM
Subject: [iPlanet-JATO] Re: Use Of models in utility classes - Pease don't
forget about the regular expression potential
Thanks Matt, Mike, Todd
This is a great input for our migration. Though we used the existing
Regular Expression Mapping tool, we did not change this to meet our
own needs as mentioned by Mike.
We would certainly incorporate this to ease our migration.
Namburi
--- In iPlanet-JATO@y..., "Todd Fast" <toddwork@c...> wrote:
All--
Great response. By the way, the Regular Expression Tool uses thePerl5 RE
syntax as implemented by Apache OROMatcher. If you're doing lotsof these
sorts of migration changes manually, you should definitely buy theO'Reilly
book "Mastering Regular Expressions" and generate some rules toautomate the
conversion. Although they are definitely confusing at first,regular
expressions are fairly easy to understand with some documentation,and are
superbly effective at tackling this kind of migration task.
Todd
----- Original Message -----
From: "Mike Frisino" <Michael.Frisino@S...>
Sent: Tuesday, August 07, 2001 5:20 PM
Subject: Re: [iPlanet-JATO] Use Of models in utility classes -Pease don't
forget about the regular expression potential
Also, (and Matt's document may mention this)
Please bear in mind that this statement is not totally correct:
Since the migration tool does not do much of conversion for
these
utilities we have to do manually.Remember, the iMT is a SUITE of tools. There is the extractiontool, and
the translation tool, and the regular expression tool, and severalother
smaller tools (like the jar and compilation tools). It is correctto state
that the extraction and translation tools only significantlyconvert the
primary ND project objects (the pages, the data objects, and theproject
classes). The extraction and translation tools do minimumtranslation of the
User Module objects (i.e. they repackage the user module classes inthe new
jato module packages). It is correct that for all other utilityclasses
which are not formally part of the ND project, the extraction and
translation tools do not perform any migration.
However, the regular expression tool can "migrate" any arbitrary
file
(utility classes etc) to the degree that the regular expressionrules
correlate to the code present in the arbitrary file. So first andforemost,
if you have alot of spider code in your non-project classes youshould
consider using the regular expression tool and if warranted adding
additional rules to reduce the amount of manual adjustments thatneed to be
made. I can stress this enough. We can even help you write theregular
expression rules if you simply identify the code pattern you wish to
convert. Just because there is not already a regular expressionrule to
match your need does not mean it can't be written. We have notnearly
exhausted the possibilities.
For example if you say, we need to convert
CSpider.getDataObject("X");
To
RequestManager.getRequestContext().getModelManager().getModel(XModel.class);
Maybe we or somebody else in the list can help write that regularexpression if it has not already been written. For instance in thelast
updated spider2jato.xml file there is already aCSpider.getCommonPage("X")
rule:

<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getPage[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getViewBean($1ViewBean.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
Following this example a getDataObject to getModel would look
like this:
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[CSpider[.\s]*getDataObject[\s]*\(\"([^"]*)\"]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[getModel($1Model.class]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
In fact, one migration developer already wrote that rule andsubmitted it
for inclusion in the basic set. I will post another upgrade to thebasic
regular expression rule set, look for a "file uploaded" posting.Also,
please consider contributing any additional generic rules that youhave
written for inclusion in the basic set.
Please not, that in some cases (Utility classes in particular)
the rule
application may be more effective as TWO sequention rules ratherthan one
monolithic rule. Again using the example above, it will convert
CSpider.getDataObject("Foo");
To
getModel(FooModel.class);
Now that is the most effective conversion for that code if that
code is in
a page or data object class file. But if that code is in a Utilityclass you
really want:
>
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
So to go from
getModel(FooModel.class);
To
RequestManager.getRequestContext().getModelManager().getModel(FooModel.class
You would apply a second rule AND you would ONLY run this rule
against
your utility classes so that you would not otherwise affect yourViewBean
and Model classes which are completely fine with the simplegetModel call.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getModel$]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getModel\(]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getRequestContext().getModelManager().getModel(]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
A similer rule can be applied to getSession and other CSpider APIcalls.
For instance here is the rule for converting getSession calls toleverage
the RequestManager.
<mapping-rule>
<mapping-rule-primarymatch>
<![CDATA[getSession\($\.]]>
</mapping-rule-primarymatch>
<mapping-rule-replacement>
<mapping-rule-match>
<![CDATA[getSession\.]]>
</mapping-rule-match>
<mapping-rule-substitute>
<![CDATA[RequestManager.getSession().]]>
</mapping-rule-substitute>
</mapping-rule-replacement>
</mapping-rule>
----- Original Message -----
From: "Matthew Stevens" <matthew.stevens@e...>
Sent: Tuesday, August 07, 2001 12:56 PM
Subject: RE: [iPlanet-JATO] Use Of models in utility classes
Namburi,
I will post a document to the group site this evening which has
the
details
on various tactics of migrating these type of utilities.
Essentially,
you
either need to convert these utilities to Models themselves or
keep the
utilities as is and simply use the
RequestManager.getRequestContext.getModelManager().getModel()
to statically access Models.
For CSpSelect.executeImmediate() I have an example of customhelper
method
as a replacement whicch uses JDBC results instead of
CSpDBResult.
matt
-----Original Message-----
From: vnamboori@y... [mailto:<a href="/group/SunONE-JATO/post?protectID=081071113213093190112061186248100208071048">vnamboori@y...</a>]
Sent: Tuesday, August 07, 2001 3:24 PM
Subject: [iPlanet-JATO] Use Of models in utility classes
Hi All,
In the present ND project we have lots of utility classes.
These
classes in diffrent directory. Not part of nd pages.
In these classes we access the dataobjects and do themanipulations.
So we access dataobjects directly like
CSpider.getDataObject("do....");
and then execute it.
Since the migration tool does not do much of conversion forthese
utilities we have to do manually.
My question is Can we access the the models in the postmigration
sameway or do we need requestContext?
We have lots of utility classes which are DataObjectintensive. Can
someone suggest a better way to migrate this kind of code.
Thanks
Namburi
[email protected]
[email protected]
[Non-text portions of this message have been removed]
[email protected]
[email protected]

Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself. Once in awhile i get an error message about unknown error 1. If i look at the diagnosis or if runs on itunes i get the following i

Okay so my phone crashes approximately every 30 seconds. I have tried resetting it by DPU as well as on the phone itself. Once in awhile i get an error message about unknown error 1. If i look at the diagnosis or if runs on itunes i get the following. When I called the support at AT&T they think the phone is shot and it is a hardware thing but i have a hard time believing that when it happened when I sync'd it to my computer. It did get progressively worse though, at first it crashed not that often and then got worse. So restores are failing, recovery, everything. Anyone run into this?
11-11-16 18:20:36.319 [2232:16dc]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-11-16 18:20:38.350 [2232:1c50]: <DFU Device 0F128BE0>: production fused device
2011-11-16 18:20:38.350 [2232:1c50]: unable to open device_map.txt: No such file or directory
2011-11-16 18:20:38.350 [2232:1c50]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#1bfe4c4c
2011-11-16 18:20:39.132 [2232:1c50]: WinDFU::UploadData: EOF, cbRead: 553
2011-11-16 18:20:39.147 [2232:1c50]: WinDFU::UploadData: ZLP
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2011-11-16 18:20:39.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
2011-11-16 18:20:42.163 [2232:1c50]: WinDFU::ResetDevice: resetting...
2011-11-16 18:21:02.210 [2232:1c50]: WinDFU::FinalizeDfuUpdate: success
2011-11-16 18:21:03.491 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:03.507 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 18:21:03.757 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:04.554 [2232:1b88]: amai: tss_submit_job: HttpQueryInfo returned 200
2011-11-16 18:21:10.882 [2232:1b88]: <DFU Device 0F198478>: production fused device
2011-11-16 18:21:10.882 [2232:1b88]: unable to open device_map.txt: No such file or directory
2011-11-16 18:21:10.882 [2232:1b88]: WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#cfe11997
2011-11-16 18:21:12.788 [2232:1b88]: WinDFU::UploadData: EOF, cbRead: 1321
2011-11-16 18:21:12.804 [2232:1b88]: WinDFU::UploadData: ZLP
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2011-11-16 18:21:12.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
2011-11-16 18:21:15.819 [2232:1b88]: WinDFU::ResetDevice: resetting...
2011-11-16 18:21:20.866 [2232:1b88]: WinDFU::FinalizeDfuUpdate: success
2011-11-16 18:21:21.835 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:21.835 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 18:21:21.897 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
2011-11-16 18:21:22.054 [2232:1838]: AMDeviceIoControl: pipe stall
2011-11-16 18:21:22.054 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
2011-11-16 18:21:22.054 [2232:1838]: command device request for 'getenv radio-error' failed: 2008
2011-11-16 18:21:22.054 [2232:1838]: unable to open device_map.txt: No such file or directory
2011-11-16 18:21:22.054 [2232:1838]: <Recovery Mode Device 0F2A7768>: production fused device
2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: GetOverlappedResult failed
2011-11-16 18:21:24.007 [2232:1838]: AMDeviceIoControl: pipe stall
2011-11-16 18:21:24.007 [2232:1838]: USBControlTransfer: error 31, usbd status c0000004
2011-11-16 18:21:24.007 [2232:1838]: command device request for 'getenv ramdisk-delay' failed: 2008
2011-11-16 18:21:38.319 [2232:1344]: fixed TcpWindowSize (64512) can cause restore failure if too large
2011-11-16 18:21:38.335 [2232:1344]: unable to open device_map.txt: No such file or directory
2011-11-16 19:21:54.475 [2232:1344]: amai: AMAuthInstallBasebandHandleUpdaterStatus: outputDict is NULL
2011-11-16 19:21:54.538 [2232:1344]: <Restore Device 0ED73918>: Restore failed (result = 1)
2011-11-16 19:21:54.647 [2232:8ec]: iTunes: Restore error 1
2011-11-16 19:22:09.100 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:22:09.100 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:22:09.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:37:25.319 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:37:25.335 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:37:25.382 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:52:41.679 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2011-11-16 19:52:41.679 [2232:c4c]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2011-11-16 19:52:42.163 [2232:c4c]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
I also get a system crash reporter key of c392e98c929aa0b351037af00d75d08aeadc843c bug type 110
incident identifier 8ff84a87

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or password. If I delete my apps and start over, I may lose the apps that I purchased...

How do I retain my apps after I change my apple ID? Right now I'm unable to update any of the apps with the old apple ID. I get an error message about an invalid id or Password. If I delete my appos and start over, I may lose the apps that I purchased (like the ones for $5 +....

Apps are always tied to the ID that was used to purchase them originally. Did you try entering your old password and see if that works?
If you need to sign out of your old account go to Settings>Store>Tap on your ID and sign out. Sign in with the new one.
you can also access your ID in the featured tab of the App Store. Swipe to the bottom of the screen and you will find it there as well.

Dear Apple! Sorry for bothering me buy an iphone 5 features of the familiar, I have a pc restore. they forget about icloud account ID and Pass now I want to activate the device without the aid small icloud account and password. lending rules company can

Dear Apple!
Sorry for bothering me buy an iphone 5 features of the familiar, I have a pc restore. they forget about icloud account ID and Pass now I want to activate the device without the aid small icloud account and password. lending rules company can help me to activate the serial number and IMEI states do not ask Thank you!

Apple itself! I'm sorry to bother buying a used iphone 5, I have a pc restore. forget iCloud account ID and now I want to activate the device without iCloud account. Please ask apple can help me to reactivate this device does not need the drill and what? my device is iphone 5 ios 7. If possible please email: [email protected] Thank you very much

What is the difference between "Delete" & "Forget about this site" when deleting a single item in the 'History' as a 'customising' procedure ?'c'

I am still using Firefox on Windows XP

Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Getting Bluetooth to forget about my PS3 Sixaxis controller

Similar Messages

Maybe you are looking for