Getting Bridge to work in Dreamweaver

Hi, I want to be able to embed a Flash phot Gallery onto my
website. In Bridge, there is an option to create a Web Photo
Gallery. But If I do this, it creates its own HTML page.
I just want the flash object (the photo Gallery), so I can
embed it onto my own website page.
I don't know enough about HTML or Flash to "pick out the
code".
Can someone tell me a way I can embed a Flash photo Gallery
onto my website? thanks

Upload the /scripts folder
"CirusSF" <[email protected]> wrote in
message
news:et6i6m$da7$[email protected]..
>I have a webpage created in Dreamweaver - and I insert a
Flash file (SWF).
> Works just fine locally. After I upload the page (and
the SWF of course)
> The
> content is not loading properly - just doesn't show up -
you don't even
> get a
> broken content icon. I have tried an absolute link and a
relative link -
> the
> relative link works locally but not when uploaded, the
absolute link
> doesn't
> work at all. Any ideas what I am missing? Using
Dreamweaver 8.
>

Similar Messages

Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Pl;ease help I am on a deadline. Bob

Bridge unable to read cache
Trying for 3 days to get Bridge to work. Told me to unable ti read cache -- tired everything including deleting and reloading -- still getting same message. Restarted computer several times as well. Please help I am on a deadline. Bob

THANKS FOR REPLY,
No, I am on a Mac OS X 20.9.4
BOB

I STILL can't get Bridge to work, Help

I have had Photoshop CS2 installed and activated for months. However, I have never gotten Bridge to work.
I get the apparently common, "Adobe Bridge cannot be used at this time because of licensing restrictions. You must have installed and launched at least one other Adobe application to use Adobe Bridge." I have consulted TechNote 331871, and have tried its suggestions. Solution 1, Photoshop CS2 IS activated. Solution 2, everything IS in its default location. Solution 3, removing and reinstalling Bridge doesn't help. Solution 5, I have removed and reinstalled Photoshop CS2 twice. (I have not removed the activation)
Which leaves Solution 4. Whenever I try to rerun the Common File Installer, I get "Setup has detected that a newer version of this product is already installed. Setup will now terminate.", and it does.
I have had uninstalled Adobe Premiere Elements 4, thinking that might be the problem. I also have Elements 3.0 and 6.0 installed. I have tried uninstalling 6.0 to no avail.
Anyone have any idea what may be going on, and what I might do next?

Have you seen the topic about 2/3 down this page "Premiere Elements has broken Bridge"? May provide some clues.

Can I get StoreFront 5.0 to work in Dreamweaver?

I am considering the purchase of Dreamweaver CS4 and am currently using Frontpage 2003 with StoreFront 5.0. Is there anything I can do to get StoreFront to work with Dreamweaver? I don't think I can afford another shopping cart program.

I'm afraid I can't answer your question, not being familar with StoreFront.
Have you tried asking the StoreFront support people - or check out their forums... that would be my advice as I'm not sure that you'll get much of a response here with regards to Storefront.
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

Can't get wordpress site displaying in Dreamweaver CC (xampp is setup)

Hello. I've been messing around with wordpress and I wanted to get it working in dreamweaver, haven't had much luck. I was present for the techlive conference for working with WP sites in dreamweaver and listened somewhat more casually knowing it will be uploaded to the archives later for me to go back and look at. Unfortunately, it was uploaded to youtube in 480p and is pretty much useless for anyone trying to follow along since the text is completely unreadable.
From what I can tell I have the site and server setup correctly.
I have xampp installed in the default location (C:\xampp).
I downloaded the latest wordpress and extracted the folder to C:\xampp\htdocs
The apache and mysql server in xampp are running
Created a new site in dreamweaver with the local site C:\xampp\htdocs\WPsite\
I set the connection to local/network
Under servers I have the server folder as C:\xampp\htdocs\
Web url as http://localhost
When I try to open the index.php file a dialogue box pops up asking me if I want to update the file on the testing server, I click yes and another dialogue box pops up asking if dependant files should be included in the transfer, I click yes.
After clicking live view I get these errors:
Warning: require_once(C:\xampp\htdocs/wp-includes/load.php): failed to open stream: No such file or directory in C:\xampp\htdocs\wp-load.php on line 48
Fatal error: require_once(): Failed opening required 'C:\xampp\htdocs/wp-includes/load.php' (include_path='.;C:\xampp\php\PEAR') in C:\xampp\htdocs\wp-load.php on line 48
The forward and backslashes are odd. I have not touched absolutely anything in the wordpress folder or in xampp beyond what I listed. What am I doing wrong?
Any help or direction would be appreciated. I used wamp before and I could get the site working and displaying fine in the browser but I don't know how to do it with xampp. I switched over to xampp from wamp since I thought maybe I'd have more luck getting it to work in dreamweaver that way. I had some other errors in dreamweaver when I set it up using wamp.

I've gone through several of those threads and that is not the issue. The index.php file in the root directory is untouched. I have the index.php from the root folder of the WPsite and a clean wordpress download and both are identical.
I don't know if dreamweaver is doing something weird and creating files and folders locally but something weird is going on. I have a wp-content folder inside of htdocs (outside of WPsite folder) and I never created it there. It also seems to have placed or created several php files in the htdocs as well (index.php, wp-blog-header.php, wp-load.php).
I deleted them and opened the index.php file from the root folder, not themes, and it created the blog and index file again. Trying to open up the index.php from the twentytwelve theme folder seems to create the wp-content folder outside of the WPsite folder.
It doesn't seem to be copying all of the necessary files I'm assuming. The wp-content folder outside of the WPsite (htdocs/wp-content/themes/twentytwelve) only had 1 php file, index.php (guessing the one I tried to open) and nothing else inside of it.
The only thing pointing directly to htdocs is the server folder inside of the Server tab when managing a site. Should that be changed to C:\xampp\htdocs\WPsite as well or am I doing something else wrong?

How do I get the Bridge to work on my 9300?

I have been trying since April 2011 to get the BlackBerry Bridge to work on my Curve 9300. I'm using OS 6. I've spent hours and days on the phone with bewildered but friendly phone support agents.
It's been working twice after a security wipe and both times it turned itself off once I pair any other bluetooth device to the phone includoing the BlackBerry Visor Mount. Removing the paired device from the phone does not allow the Bridge to work. It seems to konk out after any change to the phone.
Is it really a choice between hands free in the car and bridging to my Playbook?
I'm hoping for some new insight since it's been almost a year. I love my phone and tablet but if I can't get this to work by April I have to look at other phone/tablet combos and it sucks since I invested in RIM with hope.
Nothing is wrong with the Playbook. This is a phone issue.
"Failed to turn off MAP Services. Blackberry Bridge cannot start. Turn off unused Serial Port profiles under Bluetooth > Options and try again."
Yes I've turned them all off except Data Transfer, and have also tried it with them all off. It has no effect. I've uninstalled, battery-pulled, reinstalled, no effect. I've downloaded the bridge from rroyy.com and no change.
Anything new?

Push it all the way in.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/e6edb2b15cb9b3456f 6d446386421777.jpg

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

Would you please provide details about your setup?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I need help getting Mini Bridge to work in PS CS6

I have already tried deleting the folder and rebooting the computer, I have tried creating a new user account, I have tried uninstalling and reinstalling the entire package and I cannot get Mini Bridge to work at all. It just keeps going to "Mini Bridge waiting for Bridge CS6..." and then never finds anything. I am having this issue on both my Macbook Pro Retina 15 and my MacBook Pro 13 (Early 2011 model). I cannot seem to find any other solutions to this problem online. I also made sure that both Macbooks are fully updated as well as all CS6 software titles. Please help me fix this!
I also made sure I added it to the exceptions list in the firewall too.

Moving the discussion to PS forum
You can also follow the solution suggested in http://helpx.adobe.com/photoshop/kb/error-waiting-for-bridge-cs5.html
they may help

Can' get Output in CC Bridge to work

Following the instructions for installing the Output Module for CC Bridge I can't get it to work.
Initially was greeted with the notification that the output module has been installed, but there was not Output Button.
Fiddling around, I could get the Output Button to show, but clicking on it would do nothing.
Un- installing, re-installing, re-setting bridge several times did not get me anywhere.
The installation shows up like this:
Any idea about what I am doing wrong?

Thanks,
reading some of the discussions on this as you suggested, made me think about coping files from CS6 over to CC.
What I found out was, that for one reason or an other, in CC Bridge there was no Workspace Folder. Once I copied that folder from CS6 to CC, everything works.

Trouble getting Dlink DWL-G820 wireless bridge to work with wrt610n

I'm trying to get some dlink wireless bridges to work with wrt610n, but not having any luck. I left Wrt610n router with default "192.168.1.1" IP address and configured bridges accordingly with "192.168.1.xxx" adresses.
Wireless bridges not happy. Any ideas ? The bridges were working fine when i was using "192.168.0.xxx" ip addresses with wrt610n
Solved!
Go to Solution.

Well I'll give you full points for reading my question, but zero points for quality of answer. If it was that simple I would have done it.
Unfortunately circumstances have changed and I have both a 192.168.0.xxx LAN & 192.168.1.xxx LAN now and the DWL-G820 (Dlink) wireless bridges must be part of the 192.168.1.xxx LAN (WRT610N Linksys router). For some reason they won't work when I configure them to be part of a 192.168.1.xxx LAN.
I'm beginning to think it's a diabolical plot by either Linksys or Dlink to prevent each other's equipment from working together.

Getting fireworks button to work in dreamweaver

I created a fireworks CS5 button with only up and over state. I exported it as HTML and even previewed the html in browser, it worked fine. But when I insert>images object>Fireworks html in the dreamweaver and preview it neither in live view or broswer, the button can't work. I have previously got it to work in dreamweaver but i don't what I did and it cant work anymore. Please help~!!! Thanks.

I created a fireworks CS5 button with only up and over state. I exported it as HTML and even previewed the html in browser, it worked fine. But when I insert>images object>Fireworks html in the dreamweaver and preview it neither in live view or broswer, the button can't work. I have previously got it to work in dreamweaver but i don't what I did and it cant work anymore. Please help~!!! Thanks.

How do I get bridge CS5 to open up with my saved workspace settings?

Every time I open bridge it opens with large thumbnails in an old folder. I have to "reset" my workspace (even though it is highlighted at the top of the page already!) and then select the last folder I was working on again.
Is there any way to get bridge to remember your last used folder and last used workspace setting and just re-open with those already set?
The current situation just leads to lots more unnecessary annoying clicking.
I've tried all the options I can find in preferences and tried creating ans saving different workspace settings but nothing seems to effect how bridge opens up the first time I use it in a session. I am running it on Windows 7.
Thanks,
Clive

That seems to solve it. I think your point about exiting bridge before shutting down is important, but you need to make sure bridge is showing the set-up you want to keep first. I now have a sensible opening screen. Thanks a lot.

Bridge not working in Photoshop CC trial.

I had the same problem with Bridge in Photoshop CS6 on another computer, so brought a new computer and downloaded the trial. Bridge stopped working after about 2 hours.
I open bridge, select a photo, open in camera raw, make adjustments, then when I try to open image in either Photoshop CC or Elements 11 or 12 I get a message that Bridge has stopped working.

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/bridge
http://forums.adobe.com/community/photoshop
Photoshop Elements is not part of the Cloud, so ask those questions in that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements

Cisco 1812 wireles setup, can't get it to work

Hello everyone,
I've read trough the "871 wireless setup" topic, which I found very helpful, but I still can't get my wireless working. Basically I have a Cisco 1812W and I would like both wireless and wired to be on the same subnet. We aren't using DHCP, so the IP's are all static (even for the wireless clients). I can connect to my wireless SSID, but ping doesn't go trough either way. Wired connections are working fine. So the wireless client is connected, but has no IP address as far as the router goes (show Dot11 associations shows it's IP as 0.0.0.0) , but the wireless client does have an IP set up.
I guess I'm overlooking something in my config, so here it is (i took out the firewall rules and aaa setup, they aren't relevant if i'm not mistaken and there's a limit to post size):
ip cef
ip tcp synwait-time 10
no ip bootp server
ip name-server <removed>
ip name-server <removed>
crypto pki trustpoint TP-self-signed-1358229530
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1358229530
revocation-check none
rsakeypair TP-self-signed-1358229530
crypto pki certificate chain TP-self-signed-1358229530
certificate self-signed <removed>
quit
username <removed>
bridge irb
interface Null0
no ip unreachables
interface FastEthernet0
description $ETH-WAN$$FW_OUTSIDE$
ip address extip extsubnet
ip access-group 101 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip inspect sdm_ins_in_100 in
ip inspect SDM_MEDIUM out
ip virtual-reassembly
ip route-cache flow
duplex auto
speed auto
interface FastEthernet1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
shutdown
duplex auto
speed auto
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encapsulation hdlc
ip route-cache flow
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Dot11Radio0
description 802.11g
no ip address
encryption mode ciphers tkip
ssid <removed>
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 <removed>
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
description 802.11a
no ip address
shutdown
encryption key 1 size 40bit 7 1ED10A3EC0C5 transmit-key
encryption mode wep mandatory
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
station-role root
interface Vlan1
description $FW_INSIDE$
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
bridge-group 1
interface BVI1
ip address <internal router ip> <subnet>
ip access-group 100 in
ip nat inside
ip virtual-reassembly
ip route 0.0.0.0 0.0.0.0 <external router IP> permanent
ip flow-top-talkers
top 5
sort-by bytes
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
<bunch of static nats>
<access rules>
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
line con 0
line aux 0
line vty 0 4
access-class 102 in
password 7 <removed>
transport input ssh
scheduler allocate 4000 1000
webvpn context Default_context
ssl authenticate verify all
no inservice
end

Okay, I've somewhat figured it out. Apparently my WPA-PSK configuration doesn't work with the integrated Broadcom adapter found in the laptop I was testing it with.
Either that or my WPA-PSK configuration is broken.
I switched over to an open network with no encrpytion and everything works now.

Getting stylesheets to work in header.php and files associated with it

Let's say I created a header.php file in my includes folder. And I include it in my index.php file in the site root directory.
Then in the header.php file, I have a link to the style sheet.
The issue I've always found is that you can't get the header.php file to apply the stylesheet.
I can get it to work using global links, however I don't want to do that as I'll have to undo them before I upload the site. (And I forget....)
So anyways, I came up with this code today in an attempt to overcome this. Here is my header file so far:
"; } else echo ""; ?>
So here is what it is doing:
1. It is creating a variable called $directory which is equal to the current directory.
2. Then it is creating another variable called $currentFolder which is equal to whether or not the variable $directory contains the word "includes".
3. Then it says if $currentFolder is NOT false then it has the location of the stylesheet in relation to the header.php file.
4. Else - if it IS false then the stylesheet is located in a location in relation to files in my root directory.
This works perfectly fine....in Live view. Both the header.php and index.php will format the header in live view. Neither though will format it in Design view. Which sucks cause I was pretty happy that I came up with this code on my own.
The reason it isn't working in Design View - I realize now - is because Dreamweaver won't process that script in Design View.
Does anyone know of a way to get this script to run in Design View? Or maybe some suggestions on editing this code to get it to work in Design View?
Thanks!

>The issue I've always found is that you can't get the header.php file to apply the stylesheet.
Right. That's because, and it seems you understand this already, the css file relative location is different from the point of view of the header file, and the parent file. Since the header file is included in the parent at the server, the client then sees the css file in the wrong location.
The solution is to use Design time style sheets. This will apply the css to the page only in design time - it won't actually insert the css file into the code. So, insert the css reference into the header file from the point of view of the parent - index.html. Then add a design time style sheet. That should work.

Getting Bridge to work in Dreamweaver

Similar Messages

Maybe you are looking for