Getting BW Workbook to open in same window (Excel Display)

Hi there
We have a number of BW Workbooks that are published through the portal. I have succesfully configured the transaction iview to open the workbook, which results in Excel opening up and the workbook opening up in Excel.
Now, surely it is possible to open Excel within the portal window ... now Excel opens as a separate application, and we are left with a large white screen where the portal content is normally displayed, which doesn't look so nice.
Any ideas?
Cheers,
Andrew

Hi ,
i am facing some problem to while displaying the workbook in the portal. i selected transaction iveiw , selected alias name of the system, used rrmpx as the transaction code and in application parameter i user WBID=<xyz>.
after that i tried to preview the iview but not able. can you please guide me i am in the same path or not.
Thanks,
Srinivasu.Y

Similar Messages

  • How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

    In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
    However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
    I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
    Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

    Hi Eric,
    I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
    Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
    I used a 2 element array going into a four loop
    cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
    cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
    Defining the working director C:\altera\12.1sp1\qprogrammer\bin
    And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
    To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
    Thanks for the interest though
    Best regards John

  • HTML and XML files open in same window(KM Navigation iView)

    Hi All,
    I have created a KM navigation which is pointing the folder inside the documents repository. This folder contains HTML and XML files. It is rendering fine. But, when I click on the file links in KM Navigation iView, it is opening in new window.Here I need to open in same window. How can I acheive this?. Please help me.
    Thanks & Regards,
    Venkatesh R

    Hi ,
    check the below thread and try options mentioned in it
    https://www.sdn.sap.com/irj/sdn/thread?threadID=72594
    Koti Reddy

  • XML Edit Form should open in Same window (Not a popup).

    Hi all,
    I have requirement to open the Edit form in Same window (Not a popup).
    Assign the NewsExplorer Layout the user has edit and delete button. If the user edit the news it should not open in new window.while edit also should open in same window.
    And while creating the news by using Xml form the EDIT form open in new window but i my requirement to open in same window.
    Its possible? How to achieve this? Helpful replies will be appreciated.
    Thanks and Regards
    Thillai J

    Not solved

  • Menubuilder- Open in Same Window?

    I have the advanced link setting for my links as "Open in
    same window." The links continue to open in new windows. Is this
    feature not desinged to launch the files in the same window as the
    menu. Please help. Thanks.

    Hi MissDona
    I'm going to say "it depends". Normally, this is the default
    behavior. But it likely will depend on the output type you are
    creating. For example (and I'm somewhat assuming you fall into this
    category) if you create .EXE output from MenuBuilder, a new
    instance or window always opens, as MenuBuilder packages up the
    Flash Player inside the .EXE. Thus, this version of the player runs
    from a temporary location and has no clue about other movies and
    whatnot.
    Cheers... Rick

  • I can not get my itunes to open on my windows 7 pc

    I can not get my itunes to open on my windows 7 pc

    Is there any kind of error message?

  • Can't get URL to open in same window

    I am using Flash ActionScript3 - My banner has 3 images, each
    displays for ~5 seconds. I have each image linked to a web page
    with more info about each image. The problem is that I can't get
    the URLs to open in the same window! Each click opens another
    browser window. All attempts to resolve this using suggestions
    found in my googling for the answer results in error messages. Any
    help would be greatly appreciated!
    Here's my script for one of the images:

    In getURL you had a method parameter _self, look URLRequest
    definition in Flash help to see if it receives a similar parameter.
    _self is for link to open in same browser window, _blank is used
    for a new window.

  • JS Grid hyperlink in new window , how to open in same window

    I am using JS grid in our project server application. I have a JS grid with a hyperlink and on clicking the hyperlink it navigates to a reporting list present on the same site . My problem is when we click on the hyperlink page it opens a 
    new window instaed of this behaviour i want to open it in same window. JS grid hhyperlink column has only two properties Display and Address. While on the project center page  in Project server when we click on any project it opens the project site
    in the same window.
    dr["Hyperlink"] =
    newHyperlink()
    { Display = "Contoso",
    Address = "http://devpwa2010/pwa/projects.aspx"}

    If the CSV files are send as text/plain like in this case then Firefox will open them in a tab instead of offering to download and save the files.<br />
    Hold down the Alt key and left-click the links to get a download dialog or use the right-click context menu to save the file.

  • Trying to have pages open in same window

    Hello! Total newbie here just getting my feet wet in iWeb.
    Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
    I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
    Take a look to see what I mean: http://overcat.net/home.html
    Thanx so much for whatever help anyone can provide.
    Message was edited by: noisejoke

    I'm assuming you mean the little button in the upper right corner.
    No. The little green button in the upper left-hand corner. BTW, whether you can control the initial window's size is application-specific. Some, like Word 2004 remember when launching a new window; however, you might have to open each previously saved document, resize it, and save it. If an application doesn't offer that feature, then you'll have to take it up with the creator.

  • Navigatetourl won't open in same window and in infinite refresh

    I have a project that requires a skip button and to go to a specified url in the same window once the animation is complete. The button works, however the navigatetourl in the last frame is not behaving.
    Here is the code I've placed in the last frame:
    addEventListener(Event.ENTER_FRAME, fl_EnterFrameHandler);
    function fl_EnterFrameHandler(event:Event):void
        //Start your custom code
        // This example code displays the words "Entered frame" in the Output panel.
        navigateToURL(new URLRequest("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded_assignments/index.html"), "_self");
        stop();   
        // End your custom code
    I've tried moving it to an earlier frame, placing a stop in the earlier frame, moving the stop command to after and so on. No matter what I do, the new url opens in a new window and is in a constant state of refresh. I also have the loop turned off but the animation begins to load the first frame again anyway.  Please help. I've tried many fixed listed in forums that are all about the same with no different results.  You can view my animation here: http://www.student.nvcc.edu/home/amlayne/ite170/flash/graded%20assignments/myintro.html
    NOTE: You will have to close the browser to get the refresh to stop.
    I've been working on this one issue two days and am at a complete loss.

    Any thoughts on why my button now won't open in the same window? I'm getting a sense the built in code snippets don't work as they should, or I'm just making silly mistakes. Here's the code:
    btnSkip1.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
    function fl_MouseClickHandler(event:MouseEvent):void
              // Start your custom code
              // This example code displays the words "Mouse clicked" in the Output panel.
    navigateToURL(new URLRequest("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded_assignments/index.html"), "_self")
              // End your custom code

  • Flash URL open in same window

    Hello. I have a flash slide on my site. The slide has next and previous buttons to either move to the next slide or the previous slide. Each slide is only an image. When you click a particular image it takes you to the page specific to the image you clicked.
    My issue is this:
    When you click the image, it opens the page in a new window. I would like to have the window open in the same window, but having issues figuring out how to do it.
    The flash is controled by an image.xml script. I've added target= "_blank" to the xml, but the URLs are still opening in a seperate window. Any ideas how to get this done? I didnt create the flash, is it possible the issues lies within the .fla file?
    Below is a sample of images.xml
    <?xml version="1.0" encoding="utf-8" standalone="yes"?>
    <images>
         <pic>
            <image>imagesimage.jpg</image>
            <caption>Some Service</caption>
            <url target="_blank"> http://www.something.com</url>
        </pic>
         <pic>
            <image>images/image.jpg</image>
            <caption>Some Service</caption>
            <url target="_blank">http://www.something.com</url>
        </pic>
        <pic>
            <image>images/image.jpg</image>
            <caption>Some Service</caption>
            <url target="_blank">http://www.something.com</url>
        </pic>
        <pic>
            <image>images/image.jpg</image>
            <caption>Some Service</caption>
            <url target="_blank">http://www.something.com</url>
        </pic>
        <pic>
            <image>images/image.jpg</image>
            <caption>Some Service</caption>
                    <url target="_blank">http://www.something.com</url>
        </pic>
        <pic>
            <image>images/image.jpg</image>
            <caption>Some Service</caption>
            <url target="_blank">http://www.something.com</url>
        </pic>
    </images>

    Ned, thanks for the resonse. I've changed the xml file from _blank to _self, but still openes in a seperate window. In Firefox it opens in new tab. In IE it openes in a completely new window.
    I've cleared my cache, closed the browser, and tried again. Still openes in seperate window. Think its within the action script?

  • GetUrl won't open in same window?

    Hello,
    I am creating a website with a flash menu on each page. I am using getUrl code to target each page but I can't seem to get the pages to open in the same window. If I use '_new' or '_blank' the pages open in a new window as they should but if I use '_self' or '_top' nothing happens.
    Any help is much appreciated. Thanks!
    Code: AS3
    aboutBtn.buttonMode = true;
    aboutBtn.addEventListener(MouseEvent.CLICK, callAbout);
    function callAbout(e:MouseEvent):void{
      var url:String = "about.html";
      var request:URLRequest = new URLRequest(url);
      try {
        navigateToURL(request, '_self');
      } catch (e:Error) {
        trace("Error occurred!");

    I think I have the right code this time but it's still not working. I tried it on a Mac and it works fine but it is no working on PC (Windows). Any idea why?
    Thanks,
    Dan
    aboutBtn.buttonMode = true;
    aboutBtn.addEventListener(MouseEvent.CLICK, callAbout);
    function callAbout(e:MouseEvent):void{
        var link:URLRequest = new URLRequest("about.html");
        navigateToURL(link, '_self');

  • Pages won't open in same window

    Hello! Total newbie here just getting my feet wet in iWeb.
    Every time I publish, my pages after the home page open in new windows or tabs! How can I have each subsequent page open in the same window? Even "home" on other pages opens a new window! Obviously, this is not how I perceive a website to properly work.
    I do see where you have the option to open a new window when selecting an "External Page" in the Link Inspector. However, I don't see the opposite option when selecting "One of My Pages". Also, I'm not using Mac.com if that has anything to do with it.
    Take a look to see what I mean: http://overcat.net/home.html
    Thanx so much for whatever help anyone can provide.

    Hi Guys. Thanks so much for replying.
    Cedric - I'm in 08. I posted in the 06 forum first by mistake. And I basically don't know "how" I built the site. I just kind of poked around like I usually do, trial by many errors.
    Roddy - I've had the folder and index on my desktop. I hadn't previously uploaded the index and just did so but nothing's changed. My host company doesn't have an actual control panel. I have a feeling it's not a great one. At least for a beginner. Is there anything on their site I should be looking for?
    Cyclo - I hadn't nothiced the Hear button working correctly, since I haven't actually been working there yet! You're right it works. I guess I do have to rebuild the text buttons as you say. I guess this is the down fall of not knowing HTML.
    I really appreciate all the input folks.
    Dave

  • Open in Same Window

    I am rather new to Flash. I have created several drop down
    buttons in flash for a webpage. I have set the action to open the
    links in the same window but they are opening in a new window. I am
    wondering if it is because when opened the flash buttons come down
    too far on the page. Is there a way around this? Thank you so much
    for your time.

    Ckeezer <[email protected]> wrote:
    > What would be the code in AS 3.0 to do this same thing?
    > I have the following:
    > home_btn.addEventListener(MouseEvent.CLICK, homeClick);
    > function homeClick(event:MouseEvent):void{
    > navigateToURL(new
    > URLRequest("
    http://www.something.com/default.aspx"));
    >
    > The code works, but it opens in a new window each and
    everytime. I
    > have 5 btns on each page, this is getting ugly. Thanks
    for any help.
    > By the way, who has the best books / tutorials on
    learning Flash? I
    > downloaded CS3 to see if I liked it, it is not bad, just
    different
    > from what I have done in the past.
    You have to add the target information "_self" to open the
    new location in
    the same window.
    I don`t know where to do so in AS3 thou...
    Freundliche Grüße,
    Franz Marksteiner

  • Open in same window and clean cache from swf + html file generate with InDesign CS5

    Hi,
    1)
    I have a Indesign web file exported to swf + html.
    In my document I have a button that point to url (this url is html file of a second Indesign swf + html).
    When I click on button, the url was find an open in another window.
    Is it possible to open this second url in the same window?
    If yes How.
    I think this information is in the swf file and not in html.(How modify the swf code?)
    2)
    How to clean the cache when you reload the url? (in the html generate file)
    I'will very please if somebody of you could help me. it's Important for me.
    Regards
    Philippe

    Okay, I found the code but I can't get it to work locally.  If you have a web server maybe you can upload the files (swf and html) after you Publish them:
    import flash.net.URLRequest;
    import flash.events.MouseEvent;
    var myURL:URLRequest = new URLRequest ("http://www.google.com");
    testlink.addEventListener(MouseEvent.CLICK, clickText);
    function clickText(myevent:MouseEvent):void {
    navigateToURL(myURL, "_self");
    you have to have on the stage a link element called "testlink" (see the code above) which would be a Movie Clip with the label testlink.  It can be anything from InDesign:  a button, a rectangle, a circle, a graphic, you get the idea.  Just select that object in Flash and label it testlink or anything you choose but if you change the name from testlink also change the name in the code snippet where the line "addEventListener" is.

Maybe you are looking for