Getting codec error in a fcp project NEED HELP ASAP

All of my other projects seem to be working fine, but one project in Paticular when I try to export using "quickime conversion" I get a codec error....as soon as I hit enter...therefore I cannot get it to convert to a quicktime file.
I went an checked another project and it converted fine, it's just this one. how can I trouble shoot this.

Just copy what's in the sequence. This is just a quick fix if it works. You would still probably want to figure out what happened in the old project to avoid it in the future.
Seems like maybe you have the wrong sequence settings or something. Others here would be better equipped to troubleshoot it.
Good Luck.

Similar Messages

Error in the following code.need help asap

hi i have written a block which bulk collects into a pl/sql table.
Getting an error as shown below.
PLz help asap
declare
type summary_upd_tab is table of summary%rowtype;
summary_upd_var summary_upd_tab;
begin
select
min(a.start_time_utc),
max(a.end_time_utc),
sum(duration_seconds),
sum(upload_bytes),
sum(download_bytes)
bulk collect into summary_upd_var ------GEETTING AN ERROR --TOO MANY VALUES???
from aaa_sessions a
group by user_id;
---,type_of_summary,ispeak;
end;
Edited by: user8731258 on Jul 20, 2010 10:16 PM

i think the no. of columns should match(and that too in Order) else how will it know which value should go in which field of the collection ?

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

In Encore I get an error in the check project window of "can't execute end action because of final chapter marker"

I have imported a project to Encore and while it worked the first time, this time I get an error in the check project winder of can't execute chapter 2 end action because of final end marker? I have two different sections that have buttons on the menu. When you get to the end of the first sequence I need it to go back to the menu and it is saying that it can't because of the end action on the final marker.

The 'unable to locate' message means that you don't have those music files on that computer, or that they are not where iTunes is expecting them to be. How did you get the entries for those tracks in your new computer's iTunes ?
If you still have your old computer then you can try copying them over again : http://support.apple.com/kb/HT4527
You may also be able to re-download them from the store (checking for available downloads only checks for items that have not yet been downloaded, not for past purchases) via the Purchased link under Quick Links on the right-hand side of the iTunes store home page (re-downloading music isn't possible in all countries). You may need to delete them form your library first (where you are getting the 'unable to locate' message), otherwise iTunes will assume that you still have them somewhere and won't let you re-download them.
Re-downloading : http://support.apple.com/kb/HT2519

I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..

I am trying to restore an older iPod Touch, but do not have the passcode. I am getting an error message saying that I need to free up some space, but I cannot because I don't have the passcode and have never synced this device to my account. Help..

If it is asking for the screen-lock passcode then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Otherwise follow varjak paw recommendation

I keep getting an error message that Apple TV needs authorization

I have two 2nd generation apple tv units. The second one I installed does everything fine, streams from my Mac, pulls down itunes store for trailers and logs on to itunes store, but when I try to buy or rent I get an error message that the unit needs to be authorized. As a result I can only see previews and cannot rent or buy anything.
I give up... what is the solution?

FOr some now, my ATV 2 does not show in my devices list on iTunes. Now, as of today, I keep getting an error message when trying to rent a movie through iTunes that I need to contact iTunes support to complete the transaction. Also, the ATV 2 does not show on my MacBook Air iTunes app. The ATV 2 will stream netflix and play movie trailers so I know it's on my wireless network---but for some reason, I can't see it on my iTunes. Does anyone have any idea why this is happening and what to do about it?
THANKS!!
PDUB OKC

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive.

I perviously transfered all my iTunes music to an external hard drive. But now when I connect the external hard drive and try to play a song, I get an error message saying that I need to "locate" my music. I don't how to find it on my external hard drive. Please help for I am not that computer savy and don't want to mess anything up.
Thanks!

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help."

Hi. I'm a Mac user. After entering the redemption code from Adobe Photoshop CC, I keep getting an error saying "This card was purchased in a country that does not match your Adobe ID. You can try signing in with a different Adobe ID or get in touch with us if you need help." What should I do?

Did you purchase the software in another country than where you live?

I keep getting an error message that my computer needs to be shut down. It is like a dark screen comes down and I have to hold the on button until it shuts down. Why is this happening?

I keep getting an error message that my cmputer needs to be shut down. A dark screen comes down and it says to restart. I have to hold the ON button until the computer shuts down. Then I can restart and it says it is sending a report to Apple. This seens to be happening a lot lately. Has anyone else had this problem?

Hi Carol...
error message that my computer needs to be shut down. It is like a dark screen comes down
That is referred to as a kernel panic.
Help here > Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews

I'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1

'm trying to activate my Airport Express to a wireless network powered by an Airport Extreme. I get an error message that says I need to Use Airport Utility 5.6. My system is currently running Airport Utility 6.1

Is your AirPort Express an older 802.11g model? If so, you will need to install v5.6 if you are running OS X Lion or 5.6.1 if running OS X Leopard or Snow Leopard. Unfortunately, the iOS version of the AirPort Utility cannot administer these older base stations.

I can't get my QuickTime Player to play; I get an error message that says I need to reset my Proxy Server settings. WHA??

I can't get my QuickTime Player to play; I get an error message that says I need to reset my Proxy Server settings. WHA??

Norton is probably the issue. It can really screw things up, that is one reason I never use it. See if you can temporarily disable it and then try the sync and see if that works.
On a Mac, there is a way to run a program that repairs permissions for the user, not a Windows thing.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

I am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page

i am unable to set up my iphone 5 after reset since am getting a error stating 'unable to reach server' . i tried restoring the same from my computer but i get a error stating server unavailable' . please help me as my phone is stuck at the set up page. so i have already tried recovery mode as well.

Contact Apple support for warranty service.

PsCS6 won't open. Error Message 213:19. Need Help.

PsCS6 won't open. Error Message 213:19. Need Help.

HI jacksonthomas,
Were you able to use PS CS6?
If not, please try the solutions on the following page: http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html
Let us know if you need any further help.
-Pragya

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Getting codec error in a fcp project NEED HELP ASAP

Similar Messages

Maybe you are looking for