Getting Communication failure error in crystal reports

Hi All,
We are using Crystal reports for our business as a report tool. We are getting Communication error failure message. Please help us to resolve this issue. We are using Multihomed server.
If we can resolve this problem by coming Monday morning EST it will be great help for us.
Contact numbers are Surya : (1) 609-439-6786 (mob) and (1) 408-689-7221 (home)
Venkat: (91) 9444704889 (mob)
Waiting for your call.
With Regards,
Venkat.

Hi,
The error messages occur because there are multiple network cards or name resolution issues on the server.
To resolve the error, specify an available port for an IP address
1. Open the Crystal Configuration Manager (CCM).
2. Stop the CMS.
3. Define an available port number on the command line of the CMS for the IP address (for example, - Port <IP Address>:<port number>). Verify that the port number is not in use.
4. Start the CMS.
Now Logging on to the CMS from the applications will now occur successfully.

Similar Messages

Getting No rights error in Crystal Reports connection with SAP ECC 6

I am ABAP/BI developer and would like to work in Crystal Reports 2011. Currently, We have SAP ECC 6 and BI 7 set up. I have installed trial version of Crystal Reports 2011.
I am getting error while trying to create blank report in Crystal Reports:
Create New Connection -> SAP Tables.. -> entered SAP Development server user id and password -> following error message :
LOGON failed
Details : You do not have necessary rights to design reports against the SAP system. Please check with your system administrator.
My user id has all rights in development server. So, is any special rights require? OR do we have to install any patch for Crystal Reports at SAP level?
Please guide me.

Hi,
To be able to report off an SAP data source in Crystal Reports, request the SAP Administrator to set the appropriate authorizations for the user.
For a list of authorizations that are necessary for each type of SAP connection, consult the document:
BusinessObjects XI Integration for SAP Installation Guide
In the "Authorizations" chapter, there is a description of each authorizations needed for each type of connection and actions.
( The document is attached to this SAP Knowledge Base Article in the attachment section )
In addition to the authorizations specified in the SAP Integration Kit Installation Guide, the following authorizations are required:
For Authorization object: S_RFC with Field name: RFC_Name. According to the installation guide the values should be: SYST, /CRYSTAL/OPENSQL
Additionally you will need the value: SUSR as well.
For Authorization object: ZSEGREPORT with field name: ACTVT. According to the installation guide the value is: 02 (Change)
Additionally you will need the value: 01 (Create or generate) as well.
Thank you.

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
Can anyone help?

What is CrystalReportsJava-2013? Where did this come from - download link? CD?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Transport error: Communication failure error

I am trying to access Crystal Enterprise that is behind a firewall and am getting an Transport error: Communication failure error. I have tried the following:
1) Opened the 6400 port for the CMS.
2) Set -requestport in the command line to a different port, that is also open, for the Output Server and the Input Server.
Does anyone know what I am doing wrong? I haven't been able to locate the documention on how to run behind a firewall. I am newby on the admin side.
I am running this on Windows 2003 server.
Thanks in advance.

I can tell you from Business Objects Enterprise perspective. 6400 is the port on which CMS listens. We have web server in the DMZ so we had to open another set of ports also. We opened 2000-5000 ports also between Web server and application server ( where services are installed). The reason being that CMS listens on 6400 but other services listens on randomly selected ports different from 6400. Look into the registry entry and you will find CER. Inside CER there are two Keys RequestLowerPort and RequestUpperPort. We have defined these as 2000 to lower and 5000 to upper one.
You can set ports using -requestport and open that ports and see how it works. Opening only 6400 would not work is my guess.

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

Multi Value Parameter in SP error in Crystal Report SAP B1 ?

Hi Experts ,
i am Getting an error in Crystal Report
"Failed to retrieve data from the database. Details: 42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near '('. [Database vendor code: 120]"
I an executing the SP In Command , I want to pass multi value parameter in SP
When Pressing ok
than On Ok Button Error come
So I have Some Question
1> Why All parameter in Commend Are Automatic getting Compulsory and How to Avoid It?
2> How to Solve this error ? this error is only coming with multivalued parameter ?
i have many report in which i have to send the multi value parameter into query it self so , Plz Help Me
I am New to Crystal Report so it will be Kind Of you if explain with example .
Thankks in Advance !!!
Regards,
Mayank Shah

Hi Shachar,
i will explain one because i think some thing is misunderstood
please the images
when all parameter record selected and no parameter record selected ... i want all record should display
this blank report is problem
Regards,
Mayank Shah

Error deploying Crystal Report XI R2 to Enterprise - Failed to read paramet

Error deploying Crystal Report XI R2 to Enterprise - Failed to read parameter object.
I know this issue has been addressed several times and the solution recommended was to install Service Pack 2. I have done that. It started working for me too; however recently I got some error saying some UDF***.DLL is missing. I re-installed Crystal Reports XI R2 and Service Pack 2. Unfortunately though, this error is back. I have restarted the machine n number of times but keep on getting this error.
My report file has dynamic parameters defined through command object (SQL Query). My understanding is that once I publish the report to BoE Enterprise, BO will create LOVs and BV's in the repository. Now that is not happening.
has any one else had this issue before and resolved it?
Thanks

Hi,
do you export your CR report in your BOBJ repository using an account with administrator rights?
Regards,
Stratos

JDBC connection error in Crystal Reporting through ESRI Dekho product

Wow, I am so far out of my depth here I am not even sure I am in the correct forum. I have recently started using the GIS software ESRI product Dekho (a web based browser basically) and the reporting tool is Crystal Reports. The JDBC connection required for me to connect to data held in a corporate oracle db is failing with a driver error and I don't know how to troubleshoot it. ESRI support seem to think it's a Crystal Reports issue. If anyone has any idea what I am talking about please respond, including pointing me to a forum which might assist, if this one is not where I should be asking such a question. Thanks in advance.

Simon here from Esri Australia, I work in the support team for the Dekho product, that this client was having problems with.
We established that our Dekho product was passing the relevant information over to Crystal and that Crystal was having issues connecting to a database due to an issue with Crystal not having the correct JBDC drivers installed.
= Therefore we concluded that the client should get in touch with you to resolve these JDBC driver issues.
The error in the report is:
['Failed to open the connection, Details:JDBC driver not found"|http://i7.photobucket.com/albums/y254/jak-c/Outlook1.jpg]
We believe that the issue is specifically a Crystal Reports issue on connecting to an Oracle database.
If we take Dekho out of the equation, the issue is still apparent.
We did some testing on Oracle XE and were able to get it to communicate with Crystal Reports ok.
We had to make the following change:
1. copied the database drivers from:
C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib
to
C:\Program Files (x86)\Business Objects\Common\4.0\java\lib\external\
2. Edit "C:\Program Files (x86)\Business Objects\Common\4.0\java\lib" to include the above JAR file into the classpath tag.
We touch on this in [our own web-help|http://www.dekho.com.au/help/31/default.htm?turl=Documents%2Fconfigurecrystalreports.htm], although this is more specific to SQL Server.
The client had problems setting up this Crystal Reports to Oracle link, due to drivers missing.
Can you generate a support ticket for this client and assist her with getting CR drivers working with her version of Oracle?
As a sidenote - Esri Australia is a distributor for Esri, and not sure if the OEM extends to us?
We would like to get a better relationship with you on how to deal with Crystal related issues with our own product.
For issues like the above, we would like to come up with a more efficient means for our clients to get resolutions to their issues, and if the issue stems to outside our product - a good process for our support team to log a ticket on behalf of our client and pass all the relevant info across, so that a solution can be resolved quickly.
- Do you have a contact in Australia that we could talk to about this?
Let me know if you need the clients contact details - I believe this is still an issue for her.

Error with crystal report using SAP GUI

Hi,
While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
Errors in Crystal Reports Installation(SupportsSAPQuery)
Message no.ALVHT218
Diagnosis:
This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
This sotware is either not available on your frontend or has been installed with errors
System Response:
The action has been terminated
Once again
thank you

Hi
Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
Regards
Sourashree

Error with Crystal Reports XI R2 installation

I was attempting to get support but no luck with over the phone support so maybe I can find some help here.
"It apparently looks like there is a problem with the Crystal Server Installation itself in your system. The sample files that came with Crystal package itself is not showing up.
See attached screen shot that shows the error when you are trying to run "SimplePreviewReport.asp" from IIS."
Screenshot shows the web page will not open from http:
localhost\CIReports\SimplePreviewReport.asp

Hi Todd
Can I assume that the product itself was installed correctly and you are having trouble running one of the SDK samples? Which product have you installed.... Crystal Reports or Crystal Reports Server? The sample page you are using indicates that you might be using the Report Design Component.... you will know this if you see the CrystalRuntime.Application object in your code.
Your post indicates that you have installed Crystal Reports Server...... If this is the case, and you want to use the RDC, then you will also need to install Crystal Reports on the server as well, since the RDC get's its runtime from Crystal Reports.

Temporary error "A Crystal Reports job failed because a free license ..."

Hi all,
We coded with VS 2003 a .NET 1.1 application which using the Crystal Report 9 Redistribution package .NET ready to display reports from measured data from our device. The data is stored in a SQL Server 2000 MSDE. Crystal Report has his own DB connection to the SQL server to read the data to display the report.
Our application runs well on approx. 100 distributed installations. But on six customers installation we get this error. Actual on two customers PCs using the same DB we get the error "A Crystal Reports job failed because a free license could not be obtained in the time allocated.". This error pop up every time, when the report is shown. Although the report get shown completely.
I observed in the 'Windows Event Viewer => "System" log after the above-mentioned error following entry "Crystal Report job was delayed 2 (sec)." once for every time when the user requested a report.
I restored an empty DB on customers PC and the error don't pop up anymore.
All CR .NET assemblies have the version 9.2.3300.0. I tested also the "CrystalReportNET_keycodefix.zip", but it doesn't help. I had checked for hours all the issues about this error message on the internet. I tested the most fitting solutions, but not one fix the problem.
I tested customers full DB on my Virtual Machine with same installation, but I don't get the error.
Cheers
Ronny

Hi Ludek 
 
Thanks for your answer. I checked all the things you asked me to do on both system. 
 
Here are the results from my investigations: 
 
1) The keycode.dll was not on the not working PC. 
I copied it to the root of C: as on the working PC. I registered it with regsvr32.exe and tested the issue. 
=> The problem still exist. 
 
 
 
2) I compared the keycode on both system: 
HKLM\SOFTWARE\Crystal Decisions\9.0\Crystal Reports\Keycodes\CR Ent 
 
non working PC: 
1 AAP50-GS00000-U7000RN 131203342 3979604006 
The code is different in comparison to the working PC, because I carried out the 'CrystalReportNET_keycodefix.zip'. Before this I made an export of the above registry key. Afterwards I wasn't able to merge this export (backup) again with the registry. I assume due to the included carriage returns in the keycode. 
 
working PC 
1 XXXXX 
 
 
 
3) I used the Process Monitor and got following error during the error sequence: 
 
I list only some key entries from the hundreds of error entries. Please inform me, how I can provide you the full logger files. 
 
non working PC: 
WriteFile C:\...\Administrator.QCNIR002\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKLM\Software\Policies\Microsoft\Windows NT\DnsClient NAME NOT FOUND 
 
But I observed beside the results: No more entries, Name not found, Fast IO Disallowed, Buffer overflow (RegQueryKey) and Range not locked (UnlockFileSingle of printer driver) no other errors. 
 
 
working PC 
Operation: Path: Result: 
WriteFile C:\...\Administrator\Local Settings\temp\~cpe{AD83....} Fast IO Disallowed 
RegEnumKey HKCR\Drive\shellex\FolderExtensions NO MORE ENTRIES 
RegOpenKey HKLM\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
RegOpenKey HKCU\Software\Crystal Decisions\9.0\Crystal Reports\Database NAME NOT FOUND 
 
 
 
4) Service Packs 
We could only compare the file size of the Merge Module we used with the one you provided me in the above link. 
 
<table border=0 cellpadding=0 cellspacing=0>
<tr>
<td>file name</td>
<td>file size of used Merge Module</td>
<td>file size of SP1 Merge Module</td>
</tr>
<tr>
<td width=150>crnetruntime.msm</td>
<td width=100>4'764'672 Byte</td>
<td width=100>4'770'304 Byte</td>
</tr>
<tr>
<td>license.msm</td>
<td>578'048 Byte</td>
<td>578'048 Byte</td>
</tr>
<tr>
<td>reportengine.msm</td>
<td>10'701'824 Byte</td>
<td>10'905'088 Byte</td>
</tr>
</table>
 
But I tried to install SP7 on my PC and on customers PC, but I got following error after I accepted the license agreement in the setup.exe: titlebar of window 'Information', Msg: 'Failed to create Backup folder -110' and just a button 'OK'. I got into an infinit loop and I could only end the process: 'IKernel.exe'. 
Remark: I get the same error with SP5 and SP6. 
 
 
 
5) Modules - comparison of DLL's 
 
I cross checked all the DLL in Modules, which begin with CR and some other, because there were over 100 DLL's. 
 
<table x:str border=0 cellpadding=0 cellspacing=0 width=834 style='border-collapse:
collapse;table-layout:fixed;width:626pt'>
<col width=385 style='mso-width-source:userset;mso-width-alt:14080;width:289pt'>
<col width=179 style='mso-width-source:userset;mso-width-alt:6546;width:134pt'>
<col width=110 style='mso-width-source:userset;mso-width-alt:4022;width:83pt'>
<col width=80 span=2 style='width:60pt'>
<tr height=17 style='height:12.75pt'>
<td height=17 width=385 style='height:12.75pt;width:289pt'>CRHEAPALLOC.DLL</td>
<td width=179 style='width:134pt'>9.2.0.2</td>
<td width=110 style='width:83pt'>9.2.0.2</td>
<td width=80 style='width:60pt'></td>
<td width=80 style='width:60pt'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRPE32.DLL</td>
<td>9.2.3.1183</td>
<td>9.2.3.1183</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRQE.DLL</td>
<td>9.2.1.625</td>
<td>9.2.1.625</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRTOWORDS_EN.DLL</td>
<td>9.2.0.14</td>
<td>9.2.0.14</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.CRYSTALREPORTS.ENGINE.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTAPPSERVER.CLIENTDOC.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.REPORTSOURCE.DLL</td>
<td>9.3.9500.7</td>
<td>9.3.9500.7</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.SHARED.DLL</td>
<td>9.3.9500.10</td>
<td>9.3.9500.10</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALDECISIONS.WINDOWS.FORMS.DLL</td>
<td>9.3.9500.12</td>
<td>9.3.9500.12</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>CRYSTALKEYCODELIB.DLL</td>
<td>9.2.3300.0</td>
<td>9.2.3300.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>keycode.dll</td>
<td>9.0.0.281</td>
<td>9.0.0.281</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCE.DLL</td>
<td>2.81.1135.0</td>
<td>2.81.1135.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADCER.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADO15.DLL</td>
<td>2.81.1128.0</td>
<td>2.81.1128.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSADRH15.DLL</td>
<td>2.81.1117.0</td>
<td>2.81.1117.0</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>MSCORLIB.DLL</td>
<td class=xl26>01/15/09 22:31:34</td>
<td class=xl26>7/7/08 13:39</td>
<td class=xl24></td>
<td class=xl25></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>sqlresld.dll</td>
<td>2000.80.382.0</td>
<td>2000.080.0382.00</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
<tr height=17 style='height:12.75pt'>
<td height=17 style='height:12.75pt'>crdb_ado.dll</td>
<td>9.2.1.542</td>
<td>9.2.1.542</td>
<td colspan=2 style='mso-ignore:colspan'></td>
</tr>
</table>
 
Please specify the more detailed, if you mean the Crystal framework files or the .NET files. Could you give me please the location of the framework dlls and database client dlls like a folder name, so that I can check also all of them. 
 
I can provide you also the Module logger files, if you require them. 
 
 
I would appreciate your further help very much. 
 
Cheers 
 
Ronny
Edited by: Ronny S. on Jul 6, 2009 4:57 PM
Edited by: Ronny S. on Jul 6, 2009 5:02 PM
Edited by: Ronny S. on Jul 6, 2009 5:17 PM
Edited by: Ronny S. on Jul 8, 2009 11:44 AM
Edited by: David Hilton on Jul 15, 2009 11:04 AM
Removed private keycode.

Using the Export to PDF online service, I get "Conversion Failure" error message; why?

Using the Export to PDF online service, I get "Conversion Failure" error message; why?
The documen t was originally created with Word (*.doc) then printed to PDF format; now I need to convert back to Work, but I get the "Conversion Failure" error message, both on conversion back to *.Doc format and attempt to convert to *.docx format.

Hi lfordlaw,
How large is the PDF that you're trying to convert? How did you generate the PDF from Word (did you use Acrobat, or Word's built-in PDF generator)? What version of Word are you using?
The answers to those questions should help us get to the bottom of things.
In the meantime, please try the following:
Clear the browser cache and log back in to https://cloud.acrobat.com.
Try a different web browser (see System Requirements | Adobe Acrobat Pro and Online Services for a list of supported browsers).
Try to convert a different file (if you can convert another file without error, the one you're receiving the error on may be damaged).
I look forward to hearing back from you.
Best,
Sara

When trying to Burn a DVD I get the following error: 'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03' Please advise

when trying to Burn a DVD I get the following error:
'The drive reported an error:Sense Key=MEDIUM ERROR Sense Code=0x73,0x03'
Please advise

this reccommendation is to OS 10.5.8 only
Go to the hard drive find the following folders and look for the following file, com.apple.finder.Plist, delete it and restart the computer. Its found under the following folder Users-account name-library-prefrences. This helped resolve my issue for now.

How to Resolve Join Syntax Errors in Crystal Reports 11.5

Weu2019re upgrading form Crystal Reports Runtime Client 10.0 to 11.5. I have a registry fix that resolves the join syntax errors in Crystal Reports 10.0 by updating the registry key:
[HKEY_LOCAL_MACHINE\Software\Crystal Decisions\10.0\Crystal Reports\Database\QueryBuilder\JoinBuilder]
"SQLServerJoinBuilder"="adbc"
What is the fix for Crystal Runtime 11.5?

Create a new key under:
HKEY_CURRENT_USER\Software\Business Objects\Suite 11.5\Crystal Reports\Database\QueryBuilder\JoinBuilder and add the values
"SQLServerJoinBuilder"="adbc"

Getting Communication failure error in crystal reports

Similar Messages

Maybe you are looking for