Getting "Configure VLAN" message when enabling SSO redundancy on 5508 WLC?

Hello All
We are installing a secondary 5508 HA-SKU WLC under software version 8.0.100.
After configuring the primary 5508 (redundancy management ip, peer redundancy management ip, etc) we get the message "Please configure Redundancy Management VLAN before enabling redundancy" when we select SSO enabled.  The redundancy management ips are in the same VLAN as the management ip and this is the default untagged VLAN. What have I missed?
John.

Hi Ralph,
We're running 8.0 in a  WLC 8500 series but nor tagged nor untagged interface is working. This are the scenarios we have tested:
management interface tagged + switchport trunk tagged + HA tagged + switchport trunk tagged = SSO not working
management interface tagged + switchport trunk tagged + HA untagged + switchport access = SSO not working
management interface untagged + switchport trunk native vlan + HA untagged + switchport access = SSO not working
No scenario is working and in cases 1 and 2 we have lost the associated APs as they only recover in case 3.
In parallel, after enabling tagged interface in management, the "show ip arp" of the switch shows the IP through the HA interface and the ping is lost outwards WLC and inwards.
Any suggestion?
Regards.

Similar Messages

  • I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

    I'm getting a error message when using Apple Configurator "unable to send ClearPasscode command to device"

    Yes, that is correct.  My spreadsheet has the following information in those cells if you want to compare yours on Monday:
    Product Type
    Application
    |
    AdamId:
    <and a 9 digit number>
    I ended up bringing the Macbook Pro home with me after struggling with it for a half hour at the end of a long day. I called and within 5 minutes the problem was corrected.  The technician said they were getting calls all day. 

  • I keep getting the error message when trying to update iMovie There was an error in the App Store. Please try again later. (20)" Does anyone know how to fix it?

    I keep getting this error message when updating imovie "There was an error in the App Store. Please try again later. (20).  Does anyone know how to fix?

    If you're having problems with the App Store you might try this:
    1 - enable the Debug menu in App Store:
    open the Terminal application.
    copy the command below and paste into the Terminal window:
    defaults write com.apple.appstore ShowDebugMenu -bool true
    followed by Enter.
    launch App Store, login.
    2 - select the Debug ➙ Reset Application option:
    3 - try again.
    OT

  • Firefox will no longer play videos and keeps telling me to download the latest version of Adobe Flashplayer which I have done 5 times but still get the same message when I try to play videos. I can play videos on Internet Explorer and Google Chrome .

    Recently when I try to play a video on Firefox I get the same message that I need to download the latest version of Adobe Flash Player. At least 5 times I have downloaded Adobe Flash Player 11 Active X and Adobe Flash Player Plugin 64 bit. Problem is that even though I have the latest version I still get the same message when I try to watch videos on Firefox. The frustrating thing is I can watch videos on Internet Explorer and Google Chrome as well as on Safari. How does that make sense?
    Today, I upgraded to Firefox 10.0.2 (x86eng-us) hoping that would enable me to watch video on Firefox but it made no difference either. I would rather use Firefox as my default browser but if I can't get help so I can view video on it I will be forced to use another browser.

    Hi arpriltime,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
    Hopefully this helps!

  • I am getting this error message when trying to install free version of photoshop..."This application

    I am getting this error message when trying to install free version of photoshop..."This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. What am I doing wrong?

    From the error message it appears that you are facing difficulties with the Adobe Download Assistant.  The error message is related to Adobe AIR which the Adobe Download Assistant utilizes.  Please remove your current installation of Adobe Download Assistant and reinstall.  You can find more details under the known issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues.

  • HT2623 I keep getting an error message when I enter my password for iCloud IMAP server

    I keep getting an error message when I enter my password for iCloud IMAP server

    A number of users who have chosen to set up iCloud mail manually in the Mail application seem to encounter problems with continually being asked to sign in. This may well be a result of incorrect settings such as not setting 'Apple Token' for authentication under the accounts advanced settings.
    A more general approach to remedying such problems would be to turn off Mail in System Preferences/Settings > iCloud, checking the account has been removed from Mail (and deleting it if it hasn't), restarting and then enabling iCloud Mail again from System Preferences/Settings > iCloud. This will ensure the correct settings are used.

  • Help! I get the following message when I try to open links or go to a site...

    Help! I get the following message when I try to open a link: Domain not configured This domain points to a Wikimedia Foundation server, but is not configured on this server. Also, whenever I try to refresh a page it takes be back to Wikipedia? Why does that happen and how do I fix it? Thanks!!!

    I just tried that and it partially fixed the problem, when I refresh a page it no longer takes me to Wikipedia! Also, I was able to open the link but I am getting the same message as previously when I try to open additional links on that page. This was helpful, thanks. Any other suggestions to why it continues to happen within the link that I was able to open? This other link is a PDF file..

  • I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

    I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

    Hi. I get the following message when trying to update or install an application: "impossible to connect to iTunes store". Does anyone know how to fix this? Thanks!

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

    I get the following message when installing 11.0.5 "The feature you are trying to use is on a network resource that is unavailable" for windows install

    I just found a way to get Fixit to Run.  Go to http://support.microsoft.com/fixit/ and then pick "Install or upgrade software or hardware" and run Fixit from the "Run" button on the webpage.  I just picked run, instead of save, and ran it directly from the web page for each of the apple software.  If the window doesn't come up full size, hit "Tab" twice and then "Return".  You'll be able to see the prompts from there.  Have it attempt to uninstall iTunes on its own.  Repeat the process for any of the other Apple products, including Bonjour and iCloud.  Then, go to the iTunes website and install from there.  I had a downloaded copy and installed from there, but it came up with an error about missing the apple help, or something like that.  It allowed me to uninstall, and I reinstalled direclty from the website, and it all works now.

  • I get an error message when I try to save my images in Photoshop CS6

    I get an error message when I'm trying to save my images.  It reads as follows:
    "Could not save because file is locked, you do not have necessary access permissions or another file is using it"
    The file is not locked (I unlocked the image as a layer), I am the administrator, and it wasn't being used elsewhere.
    This has happened with all the images I've worked on in the past 90 minutes.  Has anyone got a solution?   I've never gotten this message before

    Check that you actually have write permissions on the drive you are trying to save to.  They can an do get changed.

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • I am getting an error message when I try to burn a cd

    I am getting an eror message when I try to burn a cd of an iTunes playlist. The number that came up was 4310. Help!

    Hey KISSAPES,
    I came across some information for you that goes over troubleshooting CD/DVD drives in iTunes for Windows. I would first recommend following along with the steps within:
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Then, if that doesn't seem to solve the problem, you can try removing and reinstalling iTunes. There are directions for that here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Cheers,
    Delgadoh

  • After closing out, FF will not restart, says it is already running forcing me to reboot. I have removed and re-installed FF and still get the same message when trying to open the internet using FF. How can this be fixed?

    When I close out Firefox, and return later to use the internet, I click on Firefox and it gives me a message stating that Firefox is already running and needs to be closed before restarting or reboot my system. This occurs every time Firefox is closed and attempt to re-start it,,, not only at times,,,, EVERY time.
    I have tried removing Firefox from my system and re-installing to fix this issue however,,, this did not work. After re-installing, I still get the same message when attempting to restart Firefox.
    I have also tried Ctrl, Alt, delete to open the task manager and find there is no task to close.
    I do not have any problems when using IE, I prefer to use Firefox as it is faster and crashes less than IE.
    I am very frustrated at having to reboot my system each time I want to use the internet.
    How can this problem be repaired?

    There are various causes for this error, see [[Firefox is already running but is not responding]] for details.

  • HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

    I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync:  "you do not have enough access privileges for this operation."  It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

    See:
    iPhone - not enough access privileges: Apple Support Communities

Maybe you are looking for