Getting CoolType invalid font error 'can't fetch cmaps' for font MyriadPro–Regular when adding text box or text callout

Just updated Acrobat X Pro on Mac to v10.1.10
Now if I try to add a text box or a text callout (text box with arrow) I get a popup error saying "CoolType invalid font error 'can't fetch cmaps' for font MyriadPro–Regular"
Any ideas much appreciated.

Hi oscar18,
This is usually caused due to corrupt/ invalid font libraries.
On your Mac, open up 'Font Book' and follow the instructions below:
Hit Cmd + A to select all fonts as shown above
Click on File > Validate Fonts
This will open up the Font Validator that will scan all your fonts and will notify you if there are any corrupt fonts. If you do see any corrupt font libraries, please remove/ delete those fonts from your computer. Then try opening Acrobat and check.
Regards,
Rave

Similar Messages

Error: can't fetch data for this host - too few bytes supplied by RPC

Hi,
In our internal Lab we have:
One Admin, Media,Client Server (we can make backups for himself) - Solaris 10 with DDS4 tape drive (lab)
One Windows Client (we can make backups) - Windows XP
One Linux Client - CentOS 5.1
When we add the linux client with the command:
mkhost -a ob --inservice -r client -k 1024 linux
We receive this message in the linux (host) /usr/tmp/observiced.log
Error: can't fetch data for this host - too few bytes supplied by RPC partner (OB cached object manager)
And in the obtool we receive (forever looping)
Info: waiting for host to update certification status...
Can you help us with this linux client error ? (iptables and selinux disabled!!)
Thanks in Advance
Serpins

[SOLVED]
Selinux not well removed....
Thanks in Advance
Serpins

After Effects Error: can't fetch cmaps (iMac // Lion)

Hi,
since I have installed my Adobe Master Collection CS5.5 I can't open After Effects CS5.5.
There pops up an Error message which says:
I tried to reinstall the Applikation and also to reboot my System but it doesn't works.
System Information:
Modellname:
iMac
Modell-Identifizierung:
iMac12,1
Prozessortyp:
Intel Core i5
Prozessorgeschwindigkeit:
2,7 GHz
Anzahl der Prozessoren:
1
Gesamtanzahl der Kerne:
4
L2-Cache (pro Kern):
256 KB
L3-Cache:
6 MB
Speicher:
4 GB
AMD Radeon HD 6770M:
Chipsatz-Modell:    AMD Radeon HD 6770M
Typ:    GPU
Bus:    PCIe
VRAM (gesamt):    512 MB
Hersteller:    ATI (0x1002)
I would really appreciate if you could help me solve this issue
Regards

Repair your font caches/ remove possibly damged fonts.
Mylenium

After upgrading to iOS 7.0.6, I get intermittent "invalid SIM" error.

After upgrading to iOS 7.0.6, I get intermittent "invalid SIM" error where the carrier strength (top left corner) should be.   Of course I loose all data and cellular connections at that time.   The only workaround is to power the device off and back on.   I have to do this at least once every 2 or 3 days since the upgrade to 7.0.6.   Anyone else having SIM related errors since the upgrade?
This happened once before when I first updated to iOS 7.   The next patch that Apple sent out resolved the issue, and I haven't seen it again until now.
I hear 7.1 may be coming out as soon as next week.   Any chance this issue is resolved in that release?

Thanks for the input. That link shows steps that I've already taken. I know it sounds weird, but I believe it may be software related. Like I said before, this happened once before when I first upgraded to iOS7.   I lived with the issue, having to reboot the phone every couple of days, until the next update from Apple. Once they sent out the next update, the problem went away.
If it is not software related, then it must be a corruption of the software download and installation. I did it over the air. Possibly downloading whatever release comes out next will fix it because it's a new installation. The software itself may not have the fix in it, but the act of downloading and installing the new software may fix it. Just a thought...

Why do i get the invalid signature error

Why do I get the invalid signature error when trying to download the latest updates fot itunes

Hi, im getting the same thing,
Been tryin to download it for days but keeps saying "Invalid signature"
I even went into ADD REMOVE PROGRAMS hit Apple software update and change and then repair but this did not work.
Help much appreciated. Thanks

In "Previews" when adding text to a picture I can't change the font, even though a few days ago I could. How do I fix this?

In "Previews" when adding text to a picture I can't change the font, even though a few days ago I could. How do I fix this?

kgwrotethis wrote:
10.6
Use Software Update to update your os to 10.6.8 and anything else that needs to be updated. After the installations go to /Library/Preferences - trash the com.apple.Preview.plist file. Repair permissions, restart your computer and empty the trash. Your Preview issue should now be resolved.

I am getting error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion upgrade"

I am keep getting this error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion" when doing the upgrade to newly OS.

The folder would be at the root of your hard drive. Double-click Macintosh HD and look there.
If it isn’t there, I’m not sure what it is seeing.

FRM-40501 ORACLE error: unable to reserve record for update or delete when

Hello.
I have two tab pages and one item on each page. Second tab page item, is mirror item of the first one. I use synchronize property on the mirrored one.
When i try to update mirrored one i get that error: FRM-40501 ORACLE error: unable to reserve record for update or delete when.
How can i solve that?
Thanks

hi dejan,
the error u r getting means that the record cannot be locked. This is ussually caused if u had locked the record from somewhere else (u or another user) or when forms cannot find corresponding column to the base table to lock the record.. U probably r facing the second situation. I'm not sure that forms can commit a change to an item that is synchronized cause synchronized items ignore their base table attribute and just copy their value from the other item.
Why don't u try Copy Value from Item property using <block_name>.<item_name> syntax and your item will have a value copied from the other item but u will have no problem with the db transactions. I suppose..
hope this helps,
teo

"There was an error loading the preference bundle for accessibility" it appears when i open my accessibility, that is why i cant use my assistive touch

"There was an error loading the preference bundle for accessibility" it appears when i open my accessibility

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Can you customize what folder MAIL goes to when adding attachments?

Can you customize what folder MAIL goes to when adding attachments?
My friend has 2 email addresses for businesses.
He has invoices in folders for both, and wants to set up the Mac like this:
When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
Make sense?
Can this be done?
Thanks in advance....

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Why do I get an invalid handle error when debugging, on a call to ncReset?

I am working with the example program obj2obj.c
I have a PCI-CAN/2 card installed.
I must call ncReset for *both* ports (CAN0 and CAN1), prior to any other commands or I will get a driver error (NC_ERR_DRIVER, Bxxx0002).
This happens even if the program terminates properly, closing all handles, and I then remove the ncReset commands.
Fine, I can live with the ncResets.
However, if I then try and debug the program using Microsoft Visual C++, it immediately chokes on the second call to ncReset( "CAN1", 0 ) and complains about an invalid handle.
If I add a status check to both of the ncResets and run the program from the DOS command line, I don't get any errors printed out
so the calls are working fine just running the program.
The driver updates listed do not appear to address this problem (1.4.1 uses LabView which I do not have and 1.4.2 is for Windows 2000)
Why are the ncResets required in the first place?
And why can't I single step through the second call to ncReset?
Thanks in advance for your help.
System details:
PC running Windows NT 4.00.1381
PCI-CAN/2 w/driver 1.4
Microsoft Visual C++ 6.0 Professional

bsat, thank you for helping out!
I had tried using only one ncReset previously and was experiencing driver errors. I removed the second ncReset as you suggested and now it seems to work with only one. I cannot get it to fail like it was doing.
However, at least one ncReset must be used or I get the following error:
ERROR ncConfig CAN1: Driver error (qual=000b000)
Press any key to continue
I get this error even when the program terminates normally. For example:
1) Build obj2obj with the ncReset command.
2) Execute and allow to terminate normally.
3) Edit obj2obj and remove ncReset command.
4) Execute and the error message is displayed.
Amazingly, I was also able to single step through most of the program this morning. I got the first three messages (of 10 total) before ge
tting the error:
Microsoft Visual C++
First-chance exception in cctool.exe (NTDLL.DLL): 0xC0000008: Invalid Handle
It seems to be more random than first appeared and perhaps more related to MSVC than to the NI-CAN card. Any insight?
Also, having to include an ncReset is undesireable since I'd like to develop a CAN driver that could be called from multiple threads. I'd be very interested in your opinion on why I'm having trouble getting it to work without one.
Thanks again for your help, it is greatly appreciated!

Configurator error "can't fetch document"

We just rolled out 130 iPads in our school using Configurator and AirWatch. Of course a day later I was asked to update some apps that we side loaded using Configurator. Unfortunately when I plug in the iPads and hit "refresh device" I get an error stating "can't fetch document", the details say:
This stops me from backing up the device or updating apps. At this point I can't do anything.
I tried removing all profiles but that didn't help.
I don't want to wipe the devices as the students just got them and have some documents saved already.
Has anyone seen this problem before? Thanks for any help.
JP

Jason, thanks for the reply. I have not yet identified the offending App. I deployed a number of iPads, shortly after doing so I collected them to make a profile change. Almost 50% of them come up with the error just before the profiles are installed. It will update Apps, and the iOS, but you can't check in the device or apply new profiles. I suspect that for my iPads that updated in Configurator without an error, that the offending App had not yet been used. I've not yet had the time to delete Apps to find out which one might be the offender as the iPads had to go back into service right away.

When trying to add Webservice System in VC I get an Invalid URL Error

Hello,
I want to use an webservice in VC. This ws originaly was BAPI_FLIGHT_GETDETAIL. I created the ws out of it and in wsconfig got the green light. Now, if i browse the corresponding system in VC the service doesn't show up. I think this is because it isn't published in the UDDI through WSADMIN. However, the system has no UDDI (I think so because there are no UDDIs showing up in the list). Now I wanted to define an new Webservice system. And here the problem is showing up. I use the follwing URL:
http://192.168.123:8000/sap/bc/srt/rfc/sap/ws_flight_getdetail?WSDL
If I type the URL into my Browser I get the WSDL -> The URL exists. But If I use the same URL in VC I get an "Invallid URL"-error. And this is making me kind of crazy..
Can anyone give me help about this problem?
Greetings, Marco

Hi,
copy/pasted form another similar thread :
"The main reason for your problem is Configuration settings for your portal Server.
some URLs will not be allowed in every Portal.
To avoid this problem you have to do the Proxy settings in Visual administrator .
see the SAP Note :1144698."
Invalid Wsdl ?
And also : https://www.sdn.sap.com/irj/sdn/wiki?path=/display/vc/webServiceInvalid+URL
Hope this helps !
Fabien.

I have an iMac G4 PowerPC with OS 10.5.? The OS10.5.8 update failed. Now get blue screen and error-can't find Intel Power Manager. What now??

I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and must shut down. Now I get the blue screen. Startup with 'V' pressed shows multiple lines saying: error-can't find IntelCPU Power Manager. What now?? I reset PRAM, I think.....?????

I am concerned that you might have applied a system updated intended for an Intel iMac, while you have a PPC (non-Intel) iMac. Your PPC OS should not be looking for an "IntelCPU Power Manager."
Have you tried booting from the 10.5 install DVD/CD and repairing the hard drive, plus repairing permissions?
If you done the repairs mentioned above, and your problem still persists, you can also try doing a safe boot. (see http://support.apple.com/kb/HT1455 ) Then, if none of these things worked, if I were in your shoes (it's hard to diagnose these things without being there in person) I would first check that there is adequate disk space, then I would boot from the 10.5 DVD/CD install disk and reinstall the operating system. There is an option to do an archive and install preserving user files/settings, that would be the option you want, as it will save your files but install a new OS. Make sure you have a good backup of your files first. If you do not have one, use "target mode" to copy all your files before embarking on an new OS install. Assuming that you do succeed with this install, then use Software Update to get the right updates for your iMac.

Error: Can't fetch initial working directory at...

Hello all,
I was messing around using GRID control to fire off RMAN jobs...and I was doing a full backup, used as an level 0 incremental, but, after I fired it off...I found I'd forgotten to set the job to use the RMAN catalog...
At the end of the run I got the following error:
Recovery Manager complete.
Can't fetch initial working directory at /u01/GRID/oracle/10.2.0/agent10g/perl/lib/5.8.3/File/Temp.pm line 858
Can someone tell me what this means? I've done some googling but haven't found anything on this error...is the backup good or did it fail?
Thanks
cayenne

You may want to check Bug #5649288
The backup itself should still be OK, but you should check the log output in the Jobs link of Grid.

Getting CoolType invalid font error 'can't fetch cmaps' for font MyriadPro–Regular when adding text box or text callout

Similar Messages

Maybe you are looking for