Getting "Could not open connection to helper tool" when restoring a disk

I have installed OS X 10.4 on to my USB flash drive using the OS X disc that came with my iMac 24". I wanted to use the flash drive for booting the system in case I run into trouble with my iMac.
Everything was good. I was able to use the flash drive to boot my iMac with no problem. I made an image of the flash drive using Disk Utility. However, when I tried to restore it, Disk Utility kept reporting "Restore Failure: Could not open connection to helper tool". Please tell me what to do.
The USB flash drive is formatted using GUID Partition table.

Same problem here.
I successfully created an image from a drive and I'm trying to restore to another drive.
I get the "preparing source..." for 2 seconds before the "Restore Failure" dialog with his geeky and meaningless error message. what is helper tool?! I thought I was using Disk Utility!!
Anybody can suggest a work around for yet another problem missed by QA ?
thanks in advance.

Similar Messages

  • Restore Failure - Could not open connection to helper tool

    I created a disk image on an external firewire drive using disk utility.
    The external drive is bootable and I run the Disk Utility software from the external drive.
    When I try to restore from the image selecting the source and target I get the following error after clicking the "Restore" button:
    "Restore Failure
    Could not open connection to helper tool."
    Any suggestions on how to troubleshoot this?
    Additional info:
    MacBook Pro 2.16 Intel
    Tiger 10.4.7
    Boot ROM MBP12.0061.B00
    SMC 1.5f10
    Internal Hard Disk: ST9120821AS
    External Hard Disk: FireLite FW800
    All software and firmware up-to-date
    Disk Utility 10.5.6 (198.12)

    I've experienced the same problem. What I know is that we built a system image using Disk Utility on a MacPro and we experience this error when attempting to restore the image on another MacPro using Disk Utility.
    I've successfully built system images of MacBook Pros and restored them without any problems. However, I believe I may have built the image using Carbon Copy Cloner. This may warrant some more experimentation using the different utilities.

  • Telnet not working i need help : Could not open connection to the host !!

    hello all im back today with big problem with telnet i dont know why !!
    i have to computers one of them in my home and the other one in my office both of them use windows 7 so 
    home PC internet IP : 82.205.100.161
    office PC internet IP : 82.102.237.175
    so i go to control panel and then to windows features and i check Telnet Client and Telnet server 
    then i turn off my firewall 
    then i start telnet service 
    then i execute netstat -ab to know telnet port : 
    [tlntsvr.exe]
     TCP    [::]:135               Hacker-HP:0            LISTENING
    is there anythink i need to do to get that damn connection over internet NOT LAN !! pleaze help me i still get this sucks error : Could not open connection to the host
    peace 
    Dr.BL@CKDeaTH

    Hi,
    Telnet server use TCP port 23 by default.
    Here is a screenshot of my lab server,
    To verify if the TCP port 23 has been opened, we can use the portqry tool.
    Here is the download link,
    http://www.microsoft.com/en-us/download/details.aspx?id=17148
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Could not open connection to the host, on port 23: Connect failed

    Can anyone please help with this telnet problem on CISCO 877 ADSL Router
    I am trying to telnet into my ISP Router remotely using public IP which has been dynamically assigned to the router by the ISP.
    I can Ping the Router and I can also go out to the internet on that router but, I can not telnet into that router from Inside the Network nor Outside the Network. There are no Firewalls involved.
    I have tried to clear the config and reconfigure it again, it does not help, I have also applied same config on another CISCO 877 ADSL Router it still does not work.
    ERROR i get on the Command Prompt: Could not open connection to the host, on port 23: Connect failed
    I have shown some of the Show Run out put below if that helps,
    ip nat inside source list 1 interface Dialer0 overload
    access-list 1 permit x.x.x.x 0.0.0.7
    dialer-list 1 protocol ip permit
    line vty 0 4
    password 7 ***********
    login
    Manny Thanks
    Punit

    Find Below the Requested Sh run outputs
    ADSL-ROUTER1#sh run | beg line vty
    line vty 0 4
    password 7 ***********
    login
    scheduler max-task-time 5000
    end
    I have removed the IP for security reasons
    ADSL-ROUTER1#sh ip route
    Gateway of last resort is 0.0.0.0 to network 0.0.0.0
         x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    S       x.x.x.x/29 is directly connected, Vlan1
    C       x.x.x.x/32 is directly connected, Dialer0
         x.0.0.0/32 is subnetted, 1 subnets
    C       x.x.x.x is directly connected, Dialer0
    S*   0.0.0.0/0 is directly connected, Dialer0
    I also keep getting the message below on the console done know if this is part of the problem
    Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
    as reached its maximum threshold 16
    Hope this output helps
    Thanks

  • Could not open connection to the SERVER

    Below is the error message that i have encountered.
    I am using Java version 7.
    Also tried installing the previous versions as well.
    But when i check the connection using the ODBS data source administrator i was able to connect the server.
    !ENTRY com.sap.ndb.studio.navigator 4 1 2014-06-24 00:25:17.142
    !MESSAGE HDB skvk.vm.cld.sr 00 (SYSTEM) Error while refreshing system
    !SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2014-06-24 00:25:17.142
    !MESSAGE SAPControl request failed
    !STACK 0
    com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
         at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
         at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:507)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:147)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:79)
         at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
         at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
         at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
         ... 6 more
    Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
         at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
         ... 8 more
    Caused by: java.net.SocketException: Connection reset
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         ... 9 more
    Caused by: java.net.SocketException: Connection reset
         at java.net.SocketInputStream.read(Unknown Source)
         at java.net.SocketInputStream.read(Unknown Source)
         at java.io.BufferedInputStream.fill(Unknown Source)
         at java.io.BufferedInputStream.read1(Unknown Source)
         at java.io.BufferedInputStream.read(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         ... 11 more
    !SUBENTRY 1 com.sap.ndb.studio.navigator 4 4 2014-06-24 00:25:17.143
    !MESSAGE Database connection is not available. See error log for details.
    !STACK 0
    com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for details.
         at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:253)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96)
         at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException: Data receive failed .
         at com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException.createException(SQLNonTransientConnectionException.java:40)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:241)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:155)
         at com.sap.db.jdbc.exceptions.ConnectionException.createException(ConnectionException.java:22)
         at com.sap.db.jdbc.ConnectionSapDB.tryReconnect(ConnectionSapDB.java:1631)
         at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1131)
         at com.sap.db.jdbc.CallableStatementSapDB.sendCommand(CallableStatementSapDB.java:1964)
         at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
         at com.sap.db.jdbc.CallableStatementSapDB.doParse(CallableStatementSapDB.java:256)
         at com.sap.db.jdbc.CallableStatementSapDB.constructor(CallableStatementSapDB.java:215)
         at com.sap.db.jdbc.CallableStatementSapDB.(CallableStatementSapDBFinalize.java:31)
         at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1369)
         at com.sap.db.jdbc.trace.log.Connection.prepareStatement(Connection.java:1025)
         at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:413)
         at com.sap.ndb.studio.jdbc.JDBCConnection.initialize(JDBCConnection.java:235)
         at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:236)
         ... 5 more
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.869
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:116);csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:1);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.871
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.873
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.command.handlers.CatalogRefresh.execute(CatalogRefresh.java:36);org.eclipse.ui.internal.handlers.HandlerProxy.execute(HandlerProxy.java:290);org.eclipse.ui.internal.handlers.E4HandlerProxy.execute(E4HandlerProxy.java:90);org.eclipse.e4.core.internal.di.MethodRequestor.execute(MethodRequestor.java:56);org.eclipse.e4.core.internal.di.InjectorImpl.invokeUsingClass(InjectorImpl.java:243);org.eclipse.e4.core.internal.di.InjectorImpl.invoke(InjectorImpl.java:224);org.eclipse.e4.core.contexts.Context)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.875
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.894
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.modeler.base.NavigatorRepositoryInput.getConnection(NavigatorRepositoryInput.java:28);csns.sdk.repository.provider.newdbrepository.NewDBRepositoryProxyFactory.getRepositoryProxy(NewDBRepositoryProxyFactory.java:21);csns.sdk.repository.provider.newdbrepository.impl.NewDBRepositoryProvider.getProxy(NewDBRepositoryProvider.java:197);csns.sdk.repository.provider.newdbrepository.impl.NewDBRepositoryProvider.checkRepositoryAccessAuthorization(NewDBRepositoryProvider.java:214);csns.sdk.repository.newdbreposi)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.896
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.899
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.catalog.internal.Catalog.isHasPrivilegesForSchemasAvailable(Catalog.java:143);csns.catalog.internal.Catalog.fetchCatalogObjects(Catalog.java:73);csns.catalog.internal.CatalogFolder.fetchChildren(CatalogFolder.java:175);csns.catalog.CatalogWorkbenchAdapter$1.run(CatalogWorkbenchAdapter.java:98);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:26:07.901
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268);csns.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96);csns.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73);csns.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70);csns.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99);)
    !ENTRY com.sap.ndb.studio.backup 4 4 2014-06-24 00:27:01.078
    !MESSAGE Could not open connection to 'HDB skvk.vm.cld.sr 00'
    !STACK 0
    java.util.concurrent.TimeoutException
         at java.util.concurrent.FutureTask.get(Unknown Source)
         at com.sap.ndb.studio.backup.BackupConnectionHandler.openConnection(BackupConnectionHandler.java:122)
         at com.sap.ndb.studio.backup.BackupConnectionHandler.getConnection(BackupConnectionHandler.java:88)
         at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:151)
         at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:1)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    !ENTRY com.sap.ndb.studio.navigator 4 1 2014-06-24 00:27:31.615
    !MESSAGE HDB skvk.vm.cld.sr 00 (SYSTEM) Error while refreshing system
    !SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2014-06-24 00:27:31.615
    !MESSAGE SAPControl request failed
    !STACK 0
    com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
         at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
         at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:507)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:147)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:79)
         at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
         at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
         at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
         ... 6 more
    Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
         at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
         ... 8 more
    Caused by: java.net.SocketException: Connection reset
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         ... 9 more
    Caused by: java.net.SocketException: Connection reset
         at java.net.SocketInputStream.read(Unknown Source)
         at java.net.SocketInputStream.read(Unknown Source)
         at java.io.BufferedInputStream.fill(Unknown Source)
         at java.io.BufferedInputStream.read1(Unknown Source)
         at java.io.BufferedInputStream.read(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         ... 11 more
    !SUBENTRY 1 com.sap.ndb.studio.navigator 4 4 2014-06-24 00:27:31.616
    !MESSAGE Database connection is not available. See error log for details.
    !STACK 0
    com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for details.
         at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:253)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96)
         at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException: Data receive failed .
         at com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException.createException(SQLNonTransientConnectionException.java:40)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:241)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:155)
         at com.sap.db.jdbc.exceptions.ConnectionException.createException(ConnectionException.java:22)
         at com.sap.db.jdbc.ConnectionSapDB.tryReconnect(ConnectionSapDB.java:1631)
         at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1131)
         at com.sap.db.jdbc.CallableStatementSapDB.sendCommand(CallableStatementSapDB.java:1964)
         at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
         at com.sap.db.jdbc.CallableStatementSapDB.doParse(CallableStatementSapDB.java:256)
         at com.sap.db.jdbc.CallableStatementSapDB.constructor(CallableStatementSapDB.java:215)
         at com.sap.db.jdbc.CallableStatementSapDB.(CallableStatementSapDBFinalize.java:31)
         at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1369)
         at com.sap.db.jdbc.trace.log.Connection.prepareStatement(Connection.java:1025)
         at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:413)
         at com.sap.ndb.studio.jdbc.JDBCConnection.initialize(JDBCConnection.java:235)
         at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:236)
         ... 5 more
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:11.748
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.commands.OpenSAPSystemHandler$1$1.call(OpenSAPSystemHandler.java:238);csns.navigator.commands.OpenSAPSystemHandler$1$1.call(OpenSAPSystemHandler.java:1);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:11.749
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:116);csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:1);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:11.750
    !MESSAGE Connection on HDB:SKVK.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268);csns.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96);csns.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73);csns.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70);csns.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:15.378
    !MESSAGE Connection on HDB:BRSL.VM.CLD.SR:00:SYSTEM is forced to close. (csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:116);csns.backup.BackupConnectionHandler$1.call(BackupConnectionHandler.java:1);)
    !ENTRY com.sap.ndb.studio.jdbc 4 4 2014-06-24 00:38:15.384
    !MESSAGE Connection on HDB:BRSL.VM.CLD.SR:00:SYSTEM is forced to close. (csns.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268);csns.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96);csns.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73);csns.datamodel.controler.DataModelOperationJob.run(DataModelOperationJob.java:70);org.eclipse.core.internal.jobs.Worker.run(Worker.java:53);)
    !ENTRY com.sap.ndb.studio.backup 4 4 2014-06-24 00:39:08.472
    !MESSAGE Could not open connection to 'HDB skvk.vm.cld.sr 00'
    !STACK 0
    java.util.concurrent.TimeoutException
         at java.util.concurrent.FutureTask.get(Unknown Source)
         at com.sap.ndb.studio.backup.BackupConnectionHandler.openConnection(BackupConnectionHandler.java:122)
         at com.sap.ndb.studio.backup.BackupConnectionHandler.getConnection(BackupConnectionHandler.java:88)
         at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:151)
         at com.sap.ndb.studio.backup.BackupWorkbenchAdapter$2.call(BackupWorkbenchAdapter.java:1)
         at java.util.concurrent.FutureTask.run(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    !ENTRY com.sap.ndb.studio.navigator 4 1 2014-06-24 00:39:38.422
    !MESSAGE HDB skvk.vm.cld.sr 00 (SYSTEM) Error while refreshing system
    !SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2014-06-24 00:39:38.422
    !MESSAGE SAPControl request failed
    !STACK 0
    com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
         at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
         at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:507)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:147)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:79)
         at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
         at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
         at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
         ... 6 more
    Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
         at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
         ... 8 more
    Caused by: java.net.SocketException: Connection reset
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection$6.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at sun.net.www.protocol.http.HttpURLConnection.getChainedException(Unknown Source)
         at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
         at java.net.HttpURLConnection.getResponseCode(Unknown Source)
         ... 9 more
    Caused by: java.net.SocketException: Connection reset
         at java.net.SocketInputStream.read(Unknown Source)
         at java.net.SocketInputStream.read(Unknown Source)
         at java.io.BufferedInputStream.fill(Unknown Source)
         at java.io.BufferedInputStream.read1(Unknown Source)
         at java.io.BufferedInputStream.read(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTPHeader(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         at sun.net.www.http.HttpClient.parseHTTP(Unknown Source)
         ... 11 more
    !SUBENTRY 1 com.sap.ndb.studio.navigator 4 4 2014-06-24 00:39:38.422
    !MESSAGE Database connection is not available. See error log for details.
    !STACK 0
    com.sap.ndb.studio.jdbc.JDBCConnectionStatus: Database connection is not available. See error log for details.
         at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:253)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTryJDBC(SAPSystemObjectUpdate.java:268)
         at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:96)
         at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:73)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:70)
         at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
    Caused by: com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException: Data receive failed .
         at com.sap.db.jdbc.exceptions.jdbc40.SQLNonTransientConnectionException.createException(SQLNonTransientConnectionException.java:40)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:241)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:203)
         at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.generateSQLException(SQLExceptionSapDB.java:155)
         at com.sap.db.jdbc.exceptions.ConnectionException.createException(ConnectionException.java:22)
         at com.sap.db.jdbc.ConnectionSapDB.tryReconnect(ConnectionSapDB.java:1631)
         at com.sap.db.jdbc.ConnectionSapDB.execute(ConnectionSapDB.java:1131)
         at com.sap.db.jdbc.CallableStatementSapDB.sendCommand(CallableStatementSapDB.java:1964)
         at com.sap.db.jdbc.StatementSapDB.sendSQL(StatementSapDB.java:978)
         at com.sap.db.jdbc.CallableStatementSapDB.doParse(CallableStatementSapDB.java:256)
         at com.sap.db.jdbc.CallableStatementSapDB.constructor(CallableStatementSapDB.java:215)
         at com.sap.db.jdbc.CallableStatementSapDB.(CallableStatementSapDBFinalize.java:31)
         at com.sap.db.jdbc.ConnectionSapDB.prepareStatement(ConnectionSapDB.java:1369)
         at com.sap.db.jdbc.trace.log.Connection.prepareStatement(Connection.java:1025)
         at com.sap.db.jdbc.trace.Connection.prepareStatement(Connection.java:413)
         at com.sap.ndb.studio.jdbc.JDBCConnection.initialize(JDBCConnection.java:235)
         at com.sap.ndb.studio.jdbc.JDBCPlugin.createConnection(JDBCPlugin.java:236)
         ... 5 more

    No guarantee but try tapping Settings / Safari. Clear the History, Cookies, and Cache. Restart the iPad.
    And try here..   Apple - Support - iPad - Wi-Fi

  • Hello guys my problem is that when I go to run the setup of cloud crative not let me install and I get could not open the installer

    hello guys my problem is that when i go to run the setup of cloud crative not let me install and i get could not open the installer

    Please read https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Heart beat could not open connection, error code 110

    Hi, where can I find error codes for NFR and NSM?
    I have problems with some agents connecting to the engine:
    2/17/2010 16:02:55 EngineInterface: Heart beat could not open connection, error code 110
    Both engine and agent runs on the same server (10.236.19.147):
    AgentNCP Service Config
    Host Address: 10.236.19.147
    Service Ports: HTTPS: 3037 HTTP: 0
    Data Path: /var/opt/novell/filereporter/agentncp
    Debug Logging: Enabled
    Heartbeat: 60 seconds
    Engine Address: 10.239.19.147:3035
    Use SSL: Yes
    Alternate Hostname: huanovellfs1
    Engine Service Config
    Host Address: 10.236.19.147
    Service Ports
    Client HTTPS: 3033 HTTP: 0
    Agent HTTPS: 3035 HTTP: 0
    Data Path: /var/opt/novell/filereporter/engine
    Debug Logging: Enabled
    Heartbeat: 60 seconds
    DSI Address: 10.236.19.89:8009
    Use SSL: Yes
    Scans per Volume: 2
    Another OES2 server connects fine to the engine, butI have a Netware agent, which also fails to connect:
    Feb 17, 2010 4:08:11 PM SR Interface: Heart beat could not open connection.
    NFR is 1.0.0
    Thanks for any input.
    Istvan

    Hi Istvan! Sorry for the delay in our response! we are in the process
    of building a list of error codes for everyone! in the meantime the 110
    means the following:
    // Couldn't create a new network interface
    #define CC_STATUS_CCS_CANT_CREATE 110
    Is this an NSM integration installation?
    Also, remove the alternate hostname.
    If you don't mind, let's move this support issue to
    filereporter"@"novell.com!
    Thank you!
    icseke wrote:
    > Hi, where can I find error codes for NFR and NSM?
    >
    > I have problems with some agents connecting to the engine:
    >
    > 2/17/2010 16:02:55 EngineInterface: Heart beat could not open
    > connection, error code 110
    >
    > Both engine and agent runs on the same server (10.236.19.147):
    >
    >
    > AgentNCP Service Config
    > ------------------------------------------------------------------------------
    > Host Address: 10.236.19.147
    > Service Ports: HTTPS: 3037 HTTP: 0
    >
    > Data Path: /var/opt/novell/filereporter/agentncp
    > Debug Logging: Enabled
    > Heartbeat: 60 seconds
    > Engine Address: 10.239.19.147:3035
    > Use SSL: Yes
    > Alternate Hostname: huanovellfs1
    >
    > Engine Service Config
    > ------------------------------------------------------------------------------
    > Host Address: 10.236.19.147
    > Service Ports
    > Client HTTPS: 3033 HTTP: 0
    > Agent HTTPS: 3035 HTTP: 0
    >
    > Data Path: /var/opt/novell/filereporter/engine
    > Debug Logging: Enabled
    > Heartbeat: 60 seconds
    > DSI Address: 10.236.19.89:8009
    > Use SSL: Yes
    > Scans per Volume: 2
    >
    > Another OES2 server connects fine to the engine, butI have a Netware
    > agent, which also fails to connect:
    >
    > Feb 17, 2010 4:08:11 PM SR Interface: Heart beat could not open
    > connection.
    >
    > NFR is 1.0.0
    >
    > Thanks for any input.
    >
    > Istvan
    >
    >

  • Telent:could not open connection to the host on port 23 connect failed

    Hi,
    How to run commands of OEL5 host OS from windows XPP virtual machine(Vmware Player) on standalone desktop PC?
    While runing the telnet command on windows XPP virtual machine it's gives error
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Administrator>cd\
    C:\>telnet 192.168.1.2
    Connecting To 192.168.1.2...Could not open connection to the host, on port 23: Connect failed
    C:\>
    Thanks
    Regard
    GSM

    user9230833 wrote:
    Launcher means shortcut to execute any file which is inside folder in Linux.Launcher are created on desktop to execute by one click of mouse.You need to create a command file that contains the required instructions to run putty with whatever relevant command line switches in order to start the remote program/process on Linux.
    For example, you have a trusted ssh connection (no password prompting) between your Windows account and the Linux vmware account. You need to execute command line +/home/vmware/bin/vmstart myVM+ on Linux.
    Your command file in Window will look something as follows:
    @echo off
    "c:\program files\putty\pssh.exe" vmware@my-linux-server "/home/vmware/bin/vmstart myVM"Once you've create this command file (.cmd file extention), you can create a desktop shortcut for it and assign an icon to it.
    However, first test the command file via an interactive console session to ensure it works. Also, I'm not sure you can script telnet using putty - but putty's ssh does support the standard ssh command line and one can execute programs/commands on the remote server in this fashion.
    Setting up trusted ssh connections is also important as passwords is a weak security mechanism. It requires a secret to be used and coded into scripts/software that needs to be authenticated.
    With ssh you generate a public/private key combination, and provide the public key as unique identifier for your o/s user and platform to a remote server (e.g. Linux). This now enables your platform and o/s user to be authenticated via the privatre/public key pair when your platform establishes a connection with the server.
    In putty, generate a ssh key (RSA). Copy and paste the public key into the Linux server account's "+home/vmware/.ssh/authorized_keys+" file. Make sure that the +.ssh+ directory and key have user read/write permissions only. And that's it - no password needed by your account to ssh into the Linux server account. No secrets that need to be kept secret (and that can be stolen and used from any other platform to gain access).

  • Force Download PDF code - getting "could not open" error

    Hello I am having some trouble with some "force download" code. I have spent many days on google looking for a good tutorial / script but there appears to be issues with everyone of them that I try.
    I came across a simple one that I got sort-of working, however the PDFs that it downloads error for some reason. The PDF when trying to open (in adobe reader) produces the following error:
    Could not open '3GLG534WW.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
    My website with an example download link is: http://www.reese-test2.co.uk/3GLG534WWc.php - click on the green button on the download tab
    Does anyone know what I need to alter to get it to work? code below on my script (downloadSPECS.php) and underneath that the code on the actual link to the PDF
    The script code (downloadSPECS.php) :
    <?php
    $pdf = substr($_SERVER['PATH_INFO'], 1);
    if(preg_match('/^[a-zA-Z0-9_\-]+.pdf$/', $pdf) == 0) {
      print "Illegal name: $pdf";
      return;
    header('Content-type: application/pdf');
    header('Content-disposition: attachment; filename=' . $pdf);
    readfile('http://www.reese-test2.co.uk/Downloads/Specs' . $pdf);
    ?>
    The code on the green button / PDF link:
                  <p><a href="http://www.reese-test2.co.uk/scripts/downloadSPECS.php/3GLG534WW.pdf" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('SpecDL','','images/specDLB.jpg',1)"><img src="images/specDL.jpg" alt="Download Spec Sheet" width="196" height="71" id="SpecDL" /></a></p>
                  <p> </p>

    Hi thanks all for your answers.
    The PDF is def ok. you can see it fine when you put the PDFs address in the browser:
    http://www.reese-test2.co.uk/Downloads/Specs/3GLG534WW.pdf
    I changed the 1 to a 0 but got a "illegal name" error
    I have tried a few other things like adding the extra parts to the script (see code below - ob_clean and flush): Still not working though!
    I have tried changing the readfile location - adding public_html and tried a few other things, but cant make it work! Could there be a file size problem maybe? is there a code to allow for this?
    thanks
    Sara
    <?php
    $pdf = substr($_SERVER['PATH_INFO'], 1);
    if(preg_match('/^[a-zA-Z0-9_\-]+.pdf$/', $pdf) == 0) {
      print "Illegal name: $pdf";
      return;
    header("Cache-Control:  maxage=1");
    header("Pragma: public");
    header('Content-type: application/pdf');
    header('Content-disposition: attachment; filename=' . $pdf);
    readfile('http://www.reese-test2.co.uk/public_html/Downloads/Specs' . $pdf);
    ob_clean();
    flush();
    readfile($file);
    ?>

  • Could not open connection to the host on port 25 exchange 2010

    We have exchange hosted in the company with the public IP from our ISP, now we are facing the bounce back emails from some domains
    Could not be delivered because of
    Server refused mail at END OF DATA - 554 5.7.1 The message from (with the subject of (RE: Schon Properties - Final Discounted Offer - Golden System.)
    matches a profile the Internet community may consider spam. Please revise your message before resending.
    only few domains bounce back the emails.
    aslo i cannot telnet our mail server.
    so what could be the issue.
    please help someone to solve this issue.
    Fuad

    Looks like some domains you are sending to have implemented spam filters and they consider your email content to be spam.  You'll need to contact them and have them set up any whitelists for your domain as needed.
    http://www.faq.nuvotera.com/error%E2%80%845-7-1-the-message-from-with-the-subject-of%E2%80%84-matches-a-profile-the-internet/
    As far as telnet goes make sure you are using port 25 and your static IP.  Firewalls sometimes block this internally.
    -- Al

  • Exchange ActiveSync, "Could not open connection to server"

    Help me
    If we are in the W-Lan, than we can sync the MS Exchnage Account, outside from the W-Lan we receive the message. can not connect to Server, baut the Internet and another Dataapplikation running. Whats wrong??

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    First of all, I suggest that you make sure that the server address that you are using for the Exchange account is not an internal address. If it's an internal address, it will only work via WLAN at your work. Your IT department should be able to assist you with the correct information/settings.
    Otherwise, make sure that you have removed any Proxy/Port details for your internet APN via Setting > More... > Mobile networks > Access point names > Tap your internet APN.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Could not open connection to the host, on port 4555: Connect failed

    Hi,
    I am new to apache James and javamail. I have installed the necessary things to do but i still cant run telnet localhost 4555.
    What could be the cause of this?
    Could there be anything I have missed?
    pls help..
    Thanks.: )

    Find Below the Requested Sh run outputs
    ADSL-ROUTER1#sh run | beg line vty
    line vty 0 4
    password 7 ***********
    login
    scheduler max-task-time 5000
    end
    I have removed the IP for security reasons
    ADSL-ROUTER1#sh ip route
    Gateway of last resort is 0.0.0.0 to network 0.0.0.0
         x.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
    S       x.x.x.x/29 is directly connected, Vlan1
    C       x.x.x.x/32 is directly connected, Dialer0
         x.0.0.0/32 is subnetted, 1 subnets
    C       x.x.x.x is directly connected, Dialer0
    S*   0.0.0.0/0 is directly connected, Dialer0
    I also keep getting the message below on the console done know if this is part of the problem
    Mar 13 07:17:32.213: %IP_VFR-4-FRAG_TABLE_OVERFLOW: Vlan1: the fragment table h
    as reached its maximum threshold 16
    Hope this output helps
    Thanks

  • I get "could not open install.log file" when clicking on link in website which leads to an email address, all other links work OK.

    I am blocked by a message box headed 'Wise Uninstall' and the above error message each time I attempt to use a 'contact us' feature in a website which would normally takes me to an email address. The same happens when right-clicking on an image in any website to send to an email recipient.
    I would really appreciate your help in resolving this issue as it is most annoying as you can image.
    Many thanks, Judy.

    ok I managed to fix this! I had to run a disk repair it took a long time but after a reboot it now works fine.
    hard drive -> properties -> tools -> error-checking -> check now...

  • Could not open connection to server - Exchange active sync

    I would be using the email for past 9 months and suddenly stopped receiving mails... So I have deleted and tried to add account freshly, unfortunately the server occurred...
    Below are the workaround followed to resolve but no positive results,
    1. Verified for proxy
    2. It's not working in both wifi and mobile network
    3. When I configure in my friend mobile, it got connected to the server successfully.
    Please look in this and let know the solution to resolve ... Thanks in advance..
    Note: I'm using Z1 model

    Are you using KK or LP firmware
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • Could not open connection to server

    I upgraded to latest software, now emails are a no go , tried reinstalling software several times, removing and reinstalling mailwise app, no joy.

    I am running 4.4.2
    I had to factory default the thing as the voice quality so soo poor and nothing seemed to make a difference.
    Now I cannot for the love nor money create a office365 exchange account.
    I keep geeting "can not connect to server"
    Tried several mail apps along with standard one, no joy.
    After countless hours trying everything I can think of, i'm frustrated.
    Is anyone else in the same boat as me?
    Thanks heaps in advance for any assistance.

Maybe you are looking for

  • Spry Collapsible Panel problem

    Hi there, I've tried to create a few collapsible panels but I have come across a problem. When I checked the error debugger in FF, I get an issue that states "Spry undefined". I have checked a few of the forums on this and I have tried some of the so

  • How do you know what speed discs to use?

    I experienced a problem backing up my iTunes library and found out it might be due to the DVDs that I was using. I have a G4 iMac running 10.3.9. It has a superdrive but I am not sure how to figure out what speed disc to use. Can anyone help? My 16X

  • Window#toFront() does not activate JFrame

    Hello, I noticed that the method "Window#toFront()" is not enough to activate a JFrame that is hidden behind other windows/applications. So I imagined the following hack, but wonder if anyone knows about a better way: private Robot r;         try {  

  • Livecycle Policy Server and Livecycle Document Security

    Do I need Document Security to use Policy Server??

  • Mail opening email without images

    A new glitch in my Lion Mail: now my incoming email is opening without any images on them. Until yesterday, all was Ok. Email in my iMac G5-Leopard is ok but my new Lion 27-incher is just not my cup of tea. I have looked at every item in the preferen