Getting crackling sound on any audio on X305-Q701

Any audio that is playing (internet, itunes, rhapsody, video games, etc.) is getting a crackling sound. Anyone else getting this? or have a fix
Solved!
Go to Solution.

Try to update the audio driver of the computer.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=206002...
Just open that link and download the Realtek Audio Driver for Windows Vista and install it on your computer. Restart the computer after that. Hope this one works. Just tell me if its not so i can give you some other steps.
Thank You.

Similar Messages

I have an iPod Video. (30GB 5th gen) The headphone jack only works if I push the headphone cable input to one side and hold it t here. If I leave it alone it either doesnt play at all or I hear a crackling sound. Any suggestions? Thanks.

I have an iPod Video. (30GB 5th gen) The headphone jack only works if I push the headphone cable input to one side and hold it t here. If I leave it alone it either doesnt play at all or I hear a crackling sound. Any suggestions? Thanks.

There are threads ongoing on similar topics. This is not a suitable topic for this forum.
I will pass on any comments from the other threads and original post in this one, but I'm closing this topic and any further petitions like this as it will just result in "Creative-bashing" and unproducti've comments.
Cat

My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

My Iphone4 speaker wont sound play any audio and all it says when i try turning it up is " Ringer" But doesent show the bars the turn up or down. Any help? :/

Hey Hype.Beast.187,
Here are some troubleshooting steps for not being able to hear sound through your iPhone speakers. I'd pay special attention to steps 8, 9, and 10 in your situation:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
All the best,
David

Pop Crackle Sound at Each Audio Edit Point

Hello!
For the life of me I can't figure this one out.
I am working on a video using Final Cut 4.5. I am using audio that I have separated from the video image. At every AUDIO edit point (beginning or ending) I get a pop or crackle sound.
I have tried cutting out the ends of each segment but that does not help. The popping sound always occurs at the ends of each segment no matter how long or short they are. The audio was captured at 48khz, 16bit and was originally married to the video.
Any ideas?
Thank you!
Ann

This happens everyonce in a while with me. At those points I'll add a 5 or 6 frame audio +3db dissolve. It should clean it right up.

I have an iPhone 4 and I can't get the sound on any of the apps. My cell is ringing fine, it's just the apps. Can anyone help me?

I have an iPhone 4 and the phone rings just fine, but I cannot get any audio from any of the apps. I tried most everything I know. Please help.

Hello, Cdaefda.
Thank you for visiting Apple Support Communities.
I would recommend making sure the vibrate switch is not engaged. Some applications will be mute if the phone is set to silent. If the ringer switch is set to audible alert, try the steps in the second article below.
iPhone: Ringtones
http://support.apple.com/kb/ta38610
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Cheers,
Jason H.

My iphone 4s just randomly stopped playing sounds or any audio without the use of headphone

Phone will just not play sounds not matter what quick fix i try unless i am using siri which seems to work

Thanks, I tried that. However, this is what I did and what worked!! I saw this technique on a previous message on this site.
I blew air into the headphone output with a camera cleaning blowy bulb, and put in my headphones, turned them around, and pulled them out several times.
My headphone output my have been compromised with dust or dirt !
Thank you again for your reply.
PS I called Apple support and the fellow had no idea how to fix this.

I can't get any audio playback from FCP X (or Premier Pro for that matter)â¦

When I playback a clip with audio it shows good level in the meters but I get no sound from any device (internal speakers, USB headphones, 3.5mm Headphones etc etc). If I render out a clip the audio is there and plays back in QuickTIme.app.
There are a few suspicious things like not being able to adjust the Master level slider in Sound Prefs, it's locked to Max position. I first became aware of this problem when I left After Effect and went to Premiere Pro to do an video comp that AE was choking on. PPro handled it well but no sound. Decided to try doing it in FCP X even though the interface is hard for me to 'get' striaght away I found stuff online about travel mattes but still no sound. Very frustrating I have a deadline — don't we all ;-)
Any ideas?
I uninstalled SoundFlower just in case. No difference. In the Audio MIDI Setup Utility.app, PremierPro and After Effexts come up as discrete devices:
About to try zap the PRAM can't think what else to do although I found an article that says trash the audio prefs one by one.

Make an appointment to your nearest Apple Genius bar.

[Solved] Crackling sound in Wine

Hi community,
I'm having some trouble with Wine's sound output. In all Wine applications (including winecfg) I get crackling sound and many of these lines:
ALSA lib pcm.c:7832:(snd_pcm_recover) underrun occurred
All non-Wine applications work fine. I know that the problem appeared some time ago, but since I didn't use Wine for a pretty long time, I cannot tell exactly when it appeared. Currently the latest version from multilib/ is installed (1.6rc3-1). Here is the list of opt deps (installed ones are marked as such):
Optional Deps : giflib [installed]
lib32-giflib
libpng [installed]
lib32-libpng [installed]
libldap [installed]
lib32-libldap [installed]
gnutls [installed]
lib32-gnutls
lcms [installed]
lib32-lcms
libxml2 [installed]
lib32-libxml2
mpg123 [installed]
lib32-mpg123 [installed]
openal [installed]
lib32-openal [installed]
v4l-utils [installed]
lib32-v4l-utils [installed]
libpulse [installed]
lib32-libpulse [installed]
alsa-plugins [installed]
lib32-alsa-plugins [installed]
alsa-lib [installed]
lib32-alsa-lib [installed]
libjpeg-turbo [installed]
lib32-libjpeg-turbo [installed]
libxcomposite [installed]
lib32-libxcomposite [installed]
libxinerama [installed]
lib32-libxinerama [installed]
ncurses [installed]
lib32-ncurses [installed]
libcl
lib32-libcl
oss
cups [installed]
samba
I need to say that I'm using the fix for crackling noise in Skype: https://wiki.archlinux.org/index.php/Sk … -bit_OS.29 (adding "tsched=0" to some line in /etc/pulse/default.pa). Trying to revert the fix left me without sound at all for some reason.
The .asoundrc (nothing changed as far as I remember):
$ cat ~/.asoundrc
pcm.dmixout {
# Just pass this on to the system dmix
type plug
slave {
pcm "dmix"
defaults.pcm.rate_converter "samplerate_best"
Thanks for any hint,
PhotonX
Last edited by PhotonX (2013-06-23 19:36:55)

Thanks for your reply! I don't think, I use dmix, the .asoundrc is some default one (might actually be a pretty old one since I tend to carry my /home partition over to new system installs). I tried to remove it with no luck. pulseaudio-alsa has been already installed with following /etc/asound.conf:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
Since nothing changed after removing .asoundrc, maybe this asound.conf has been used all the time rather than the .asoundrc?
Concerning the tsched=0 thing, the driver is snd_hda_intel (with snd_hda_codec_realtek), the card is an ALC887-VD. The Alsa page you mentioned states that indeed some cards with snd_intel_hda (seems to be the same as snd_hda_intel) driver have problems with timer-based scheduling, but doesn't specify which ones exactly.
So now I'm following your last hint and building wine-multimedia. It had lib32-libcl as make dependency which made conflicts with lib32-catalyst-utils, so I now try building wine-multimedia with lib32-libcl removed from the makedepends list, let's see whether it builds, it takes a while. Will report back as soon as I have any news.
Last edited by PhotonX (2013-06-23 17:04:51)

No sound coming from Audio Loops

Hi,
I was in a studio session with an artist today and upon reopening Logic Pro X after a lunch break, the audio loops from the loop library are not playing. I've created a new project and dragged the loops into new tracks and they still won't play. It shows there are levels but no sound is coming out. I tried the same thing with midi loop files and those will play fine with perfect sound. I have double checked my speaker system and restarted Logic and the Computer multiple times but it still won't play any sound for any audio loops. Can anyone help me with finding a solution for this?
Thanks!

I had no idea what that was until I searched for it. But I found it and made sure it was set for "Built-in Input" for "Default Input" under System Settings, and also "Built-in Input" by Properties For... then down under Audio Input it has "Line In" as the Source... everything looks fine but I'm still not hearing anything. I even tried adding my mixer as a MIDI device(???), although I've no clue what I'm doing in that area...

LOGIC PRO 9 - glitches in the form of crackles/pops/snaps in audio

hey guys, im new to logic but im not new to music production. ive been having alot of problems with my logic studio 2.
the problems are as follows
.when about halfway through a new track logic suddenly decides to add a crackle sound in an audio file. This happens even when the file is muted and also i have used many different buffer sizes to try to rectify this. I have also tried starting a completely new song with different audio and still the same problem happens. this problem also happens when i have disconnected all of my interfaces including my soundcard. after doing this i have realized that the problem must lie within logic and i am completely clueless as what could be causing this very annoying problem.
if anyone could help i would very grateful
thanks
dj kinx

hey logic expert! you fixed my problem.....its the most simple thing and i didnt even think about it! it was a psp vintage warmer that was causing the problem
cheers
dj kinx

Just hooked up my APPLE TV to my Pioneer Elite Pro 1120 HD Just hooked up my APPLE TV to my Pioneer Elite Pro 1120 HD TV (2004/05). I get picture fine (although only 720p), but I can't get sound. Any ideas? I have a Optical Digital Audio cable, but not su

Just hooked up my APPLE TV to my Pioneer Elite Pro 1120 HD Just hooked up my APPLE TV to my Pioneer Elite Pro 1120 HD TV (2004/05). I get picture fine (although only 720p), but I can't get sound. Any ideas? I have a Optical Digital Audio cable, but not sure where to hook up?

how is it connected?
if you use a hdmi to dvi converter then you only get picture and not audio because dvi don't carry audio same with vga

TS3623 I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at top when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix?

I rented a movie and can watch preview perfectly with video and audio feed as signal strength is at highest when I checked. However, when I purchased rental video is fine , but I get scratched sound for audio. Any thoughts to fix? I rented movie within week and it worked. All previews of movies and show also works.

I have a suspicion that the problem is not in the recording device itelf, but rather in the playback-software, which is struggling with an unfamiliar audio format/codec/whatever-it's-called... I opened the file in QuickTime Player 7 (7.6.6) and selected "Show Movie Properties" and it says:
"Video Track: H.264
Sound Track: Integer (Little Endian)"
All current Mac systems support Integer (both Big and Little Endian) audio natively. The fact you can hear anything at all proves that the audio is playing back. The most likely problem would be a malfunction associated with the mic pickup.

Cannot get any audio on spdif coa

Im using vista 64 with a regular xfi xtreme gamer. I installed the newest drivers but cannot get any audio to output on the FlexiJack. The digital i/o setting is greyed out on the creative console. Ive tried everything i can and cannot not get any sound. I am using the Z5500. The receiver is across the room and my only choice is to use a long coax cable i have.

You enabled it in your windows speaker configuration under "playback devices" ?
You probably have to set it to default by rightclicking on it and activating it and set it to default!?
http://www.homeys-bunker.de/spdif.jpg

I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio. Any suggestions?

I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter. I have tried several connectors but cannot get any audio on the sound dock. Do you have any suggestions?

Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c They also have one that uses a cord to connect the dock to lightning that is $10 more.

Cant hear any audio from Sound Blaster Tactic3D Rage Wireless headset

after getting the Sound Blaster Tactic3D Rage Wireless headset i red through the booklet inside and saw that i could download software for it so i went to the address it gave me and downloaded the firmware for windows and after it was finished and i had restarted my computer the headset and USb connector would both flash nonstop. as well as this i cant hear any audio from the headset. help me if you can

Just discharge it and then charge it. Should work then, and never ever try those firmware updates they are the terrorists of these headsets

Getting crackling sound on any audio on X305-Q701

Similar Messages

Maybe you are looking for