Getting Cursor for Table control while scrolling

Hi Experts,
I am displaying 3 pages of records using table controls,
and when i double click on the record, i have to display some pop up based on the values present in the particular record,
this is done by getting the line number of the record using GET CURSOR LINE and reading the internal table with the index obtained from GET CURSOR LINE
This is working fine for one page. I am getting problem for more than one pages
i.e. if i have to validate for the 23rd record, it will be the second record in the second page, so i will get line number as 2nd instead of 23rd (using GET CURSOR LINE) and i will read the 2nd record in the internal table instead of reading the 23rd record.
This will lead to improper pop up messages.
So please let me know how can i catch/get the line number of particular record irrespective of number of pages.
Thanks,
Kavya

declare two variables to get line count and line index
data: wrk_linecnt(10),
wrk_lineindx(10).
get cursor line wrk_linecnt.
wrk_lineindx = <table control name>-top_line + wrk_linecnt - 1.

Similar Messages

Set cursor position within table control while scrolling

hi,
Anybody can guide me how to set the cursor with in table control while scrolling down,normally it is going to first input filed.
Thanks and Regards,
palani.

Hi Palani,
Could you please share with me what all you have done regarding get and set cursor. I am facing similar problem where
I have made a Z Table Control where i have given vertical and horizontal scrolling . Now when I scroll and try to select a row, then ZTABLE_CONTROL-CURRENT_LINE fetches line number not from the top, it fetches from the current top of ztablecontrol.
It is onlyy changing the value on scrolling, if i do not scroll table control then value is coming correct.
My requirement is whenever i select any row of ZTABLE CONTROL i need to get the curent line number from top. Please guide me what should i do.
Early reply will be rewarded.
Thanks.

Unable get the table scroll for table control

hai
i unable get horizontal scrolling for table control when the output is dislayed
help me
very urgent

Hi,
check out the sample program it might help you
See the following simple ex
*& Module pool ZTEST_TBLCTRL
PROGRAM ZTEST_TBLCTRL.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'TC1'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES: ZFG_SRNO, ZFIH0004.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'TC1'
*TYPES: BEGIN OF T_TC1,
ZSRNO LIKE ZFG_SRNO-ZSRNO,
SCRNAME LIKE ZFIH0004-SCRNAME,
END OF T_TC1.
*TYPES: BEGIN OF T_TC1.
STRUCTURE ZFG_SRNO.
END OF T_TC1.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'TC1'
*DATA: G_TC1_ITAB TYPE T_TC1 OCCURS 0 WITH HEADER LINE,
G_TC1_WA TYPE T_TC1. "work area
DATA: G_TC1_ITAB LIKE ZFG_SRNO OCCURS 0 WITH HEADER LINE,
G_TC1_WA LIKE G_TC1_ITAB. "work area
DATA: G_TC1_COPIED. "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TC1' ITSELF
CONTROLS: TC1 TYPE TABLEVIEW USING SCREEN 0100.
*&SPWIZARD: LINES OF TABLECONTROL 'TC1'
DATA: G_TC1_LINES LIKE SY-LOOPC.
DATA: OK_CODE LIKE SY-UCOMM,
S_CODE LIKE SY-UCOMM,
MARK.
DATA: T1(10).
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE TC1_INIT OUTPUT.
IF G_TC1_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'ZFG_SRNO'
*&SPWIZARD: INTO INTERNAL TABLE 'g_TC1_itab'
SELECT * FROM ZFG_SRNO
INTO CORRESPONDING FIELDS
OF TABLE G_TC1_ITAB.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
IF T1 <> SPACE.
G_TC1_ITAB-ZSRNO = T1.
CLEAR T1.
APPEND G_TC1_ITAB.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
*TC1-TOP_LINE = 1.
ENDIF.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE TC1_MOVE OUTPUT.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
if sy-subrc ne 0.
*append G_TC1_WA to G_TC1_ITAB.
*endif.
READ TABLE G_TC1_ITAB INDEX TC1-CURRENT_LINE.
IF SY-SUBRC = 0.
G_TC1_WA-ZSRNO = G_TC1_ITAB-ZSRNO.
ENDIF.
MOVE-CORRESPONDING G_TC1_ITAB TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
*******Below line is the logic for scrolling.
tc1-lines = G_TC1_LINES + 100.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GET LINES OF TABLECONTROL
MODULE TC1_GET_LINES OUTPUT.
G_TC1_LINES = SY-LOOPC.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MODIFY TABLE
MODULE TC1_MODIFY INPUT.
*break-point.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_ITAB.
MODIFY G_TC1_ITAB INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
REFRESH CONTROL 'TC1' FROM SCREEN '8001'.
MOVE-CORRESPONDING ZFG_SRNO TO G_TC1_WA.
MODIFY G_TC1_ITAB
FROM G_TC1_WA
INDEX TC1-CURRENT_LINE.
G_TC1_COPIED = 'X'.
if sy-subrc ne 0.
append G_TC1_WA to G_TC1_ITAB.
endif.
*modify G_TC1_ITAB INDEX TC1-CURRENT_LINE.
ENDMODULE.
*&SPWIZARD: INPUT MODULE FOR TC 'TC1'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: PROCESS USER COMMAND
MODULE TC1_USER_COMMAND INPUT.
OK_CODE = SY-UCOMM.
PERFORM USER_OK_TC USING 'TC1'
'G_TC1_ITAB'
'FLAG'
CHANGING OK_CODE.
SY-UCOMM = OK_CODE.
ENDMODULE.
INCLUDE TABLECONTROL_FORMS *
*& Form USER_OK_TC *
FORM USER_OK_TC USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME
CHANGING P_OK LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK TYPE SY-UCOMM,
L_OFFSET TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations *
*&SPWIZARD: evaluate TC name and operations *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
*&SPWIZARD: execute general and TC specific operations *
CASE L_OK.
WHEN 'INSR'. "insert row
PERFORM FCODE_INSERT_ROW USING P_TC_NAME
P_TABLE_NAME.
CLEAR P_OK.
WHEN 'DELE'. "delete row
PERFORM FCODE_DELETE_ROW USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
CLEAR P_OK.
WHEN 'P--' OR "top of list
'P-' OR "previous page
'P+' OR "next page
'P++'. "bottom of list
PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
L_OK.
CLEAR P_OK.
WHEN 'L--'. "total left
PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
WHEN 'L-'. "column left
PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
WHEN 'R+'. "column right
PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
WHEN 'R++'. "total right
PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
WHEN 'MARK'. "mark all filled lines
PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'DMRK'. "demark all filled lines
PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
CLEAR P_OK.
WHEN 'SASCEND' OR
'SDESCEND'. "sort column
PERFORM FCODE_SORT_TC USING P_TC_NAME
l_ok.
ENDCASE.
ENDFORM. " USER_OK_TC
*& Form FCODE_INSERT_ROW *
FORM fcode_insert_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME LIKE FELD-NAME.
DATA L_SELLINE LIKE SY-STEPL.
DATA L_LASTLINE TYPE I.
DATA L_LINE TYPE I.
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0. " append line to table
L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line *
IF L_SELLINE > <LINES>.
<TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
ELSE.
<TC>-TOP_LINE = 1.
ENDIF.
ELSE. " insert line into table
L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor *
SET CURSOR LINE L_LINE.
ENDFORM. " FCODE_INSERT_ROW
*& Form FCODE_DELETE_ROW *
FORM fcode_delete_row
USING P_TC_NAME TYPE DYNFNAM
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: delete marked lines *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
IF <MARK_FIELD> = 'X'.
DELETE <TABLE> INDEX SYST-TABIX.
IF SY-SUBRC = 0.
<TC>-LINES = <TC>-LINES - 1.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " FCODE_DELETE_ROW
*& Form COMPUTE_SCROLLING_IN_TC
text
-->P_TC_NAME name of tablecontrol
-->P_OK ok code
FORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE TYPE I.
DATA L_TC_NAME LIKE FELD-NAME.
DATA L_TC_LINES_NAME LIKE FELD-NAME.
DATA L_TC_FIELD_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <LINES> TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled? *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ... *
L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ... *
CALL FUNCTION 'SCROLLING_IN_TABLE'
EXPORTING
ENTRY_ACT = <TC>-TOP_LINE
ENTRY_FROM = 1
ENTRY_TO = <TC>-LINES
LAST_PAGE_FULL = 'X'
LOOPS = <LINES>
OK_CODE = P_OK
OVERLAPPING = 'X'
IMPORTING
ENTRY_NEW = L_TC_NEW_TOP_LINE
EXCEPTIONS
NO_ENTRY_OR_PAGE_ACT = 01
NO_ENTRY_TO = 02
NO_OK_CODE_OR_PAGE_GO = 03
OTHERS = 0.
ENDIF.
*&SPWIZARD: get actual tc and column *
GET CURSOR FIELD L_TC_FIELD_NAME
AREA L_TC_NAME.
IF SYST-SUBRC = 0.
IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column *
SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
ENDIF.
ENDIF.
*&SPWIZARD: set the new top line *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM. " COMPUTE_SCROLLING_IN_TC
*& Form FCODE_TC_MARK_LINES
marks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: mark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Form FCODE_TC_DEMARK_LINES
demarks all TableControl lines
-->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
P_TABLE_NAME
P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME LIKE FELD-NAME.
FIELD-SYMBOLS <TC> TYPE cxtab_control.
FIELD-SYMBOLS <TABLE> TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>. "not headerline
*&SPWIZARD: demark all filled lines *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header *
ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
<MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM. "fcode_tc_mark_lines
*& Module D20XX_INIT OUTPUT
text
MODULE D20XX_INIT OUTPUT.
*if screen-name = 'ZSRNO'.
SCREEN-INPUT = 0.
SCREEN-COLOR = 0.
MODIFY SCREEN.
endif.
ENDMODULE. " D20XX_INIT OUTPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
*CLEAR R1_REF.
DO 30 TIMES.
APPEND G_TC1_ITAB.
ENDDO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module TAB1_INIT OUTPUT
text
MODULE TAB1_INIT OUTPUT.
ENDMODULE. " TAB1_INIT OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module MESSAGE INPUT
text
MODULE MESSAGE INPUT.
OK_CODE = SY-UCOMM.
S_CODE = OK_CODE.
CLEAR OK_CODE.
if S_CODE = 'DELE'.
loop at G_TC1_ITAB.
if G_TC1_ITAB-scrname = 'X'.
delete g_tc1_itab.
endif.
endloop.
ELSEIF S_CODE = 'SAVE'.
G_TC1_WA-ZSRNO = T1.
MOVE-CORRESPONDING G_TC1_WA TO ZFG_SRNO.
REFRESH CONTROL 'TC1' FROM SCREEN '0100'.
ENDIF.
ENDMODULE. " MESSAGE INPUT
*& Module DELETE_RECORD INPUT
text
MODULE DELETE_RECORD INPUT.
IF MARK = 'X' AND S_CODE = 'DELE'.
DELETE TABLE G_TC1_ITAB FROM ZFG_SRNO.
DESCRIBE TABLE G_TC1_ITAB LINES TC1-LINES.
ENDIF.
ENDMODULE. " DELETE_RECORD INPUT
*********************Screen modules*********************
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'TC1'
MODULE TC1_INIT.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
LOOP AT G_TC1_ITAB
INTO G_TC1_WA
WITH CONTROL TC1
CURSOR TC1-CURRENT_LINE.
*&SPWIZARD: MODULE TC1_CHANGE_FIELD_ATTR
MODULE TC1_MOVE.
MODULE TAB1_INIT.
MODULE TC1_GET_LINES.
ENDLOOP.
MODULE D20XX_INIT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TC1'
*BREAK POINT.
LOOP AT G_TC1_ITAB.
CHAIN.
FIELD ZFG_SRNO-ZSRNO.
MODULE TC1_MODIFY ON CHAIN-REQUEST.
MODULE TC1_MODIFY.
ENDCHAIN.
MODULE MESSAGE .
MODULE DELETE_RECORD.
ENDLOOP.
MODULE TC1_USER_COMMAND.
*&SPWIZARD: MODULE TC1_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE TC1_CHANGE_COL_ATTR.
MODULE USER_COMMAND_0100.
please check out the link below for more information it might help you
http://help.sap.com/saphelp_sm32/helpdata/en/9f/dbac9f35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801c7b454211d189710000e8322d00/content.htm
http://www.sapbrainsonline.com/REFERENCES/ABAP_SYNTAX/SAP_ABAP_SYNTAX.html
*********please reward points if the information is helpful to you*************

How can we get a Scrolling in Table Control while data uploading?.

Can anybody suggest me the way to put a scrolling in a table control while uploading the data?

Hello,
I dont think it is possible, anyways dont do it. It will make the program perfomance very bad. There is an indicator (little watch on the left hand side), that you can use, but it is better to dont do it. As I have told you the perfomance will be very bad.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      percentage = 20
      text       = 'Uploading data'.
THAT IS THE FM. Use it after and before the upload.
Hope this helps
Gabriel

BDC for XK02 getting problem in table control.....

hello i want to migrate data for vendor from flat file to SAP.i want to update VAT date and VAT number. but i m not getting how to handle index of table control? coz when we scroll down index get changed......
pls guide me......

Hi,
refer the theards for table control index.
https://forums.sdn.sap.com/click.jspa?searchID=12815720&messageID=5466905
https://forums.sdn.sap.com/click.jspa?searchID=12815720&messageID=4290992
Regards
Kiran Sure

How to set cursor in table control?

I have a table control (Screen 300) to display invoice number and amount. For some checks we have around 200 invoices to be displayed. When user enters the invoice number in invoice text box and click on OK, it should highlight the invoice number and amount row or set the cursor position.
I have another problem.
Screen 300 is being called from Screen 200. When the user clicks on OK in 300, 300 is getting closed. Acutally it should be displayed with Cusor position or highlighted row.
I appreaciate your help ... Thanks

I believe that you can use the SET CURSOR statement to do the first part of your requirement. Something like this should work:
SET CURSOR FIELD w_field LINE w_line.
Here's the info from SAP help:
Effect
: The cursor is positioned on the screen element whose name is contained in upper case in field. The data object field must be character-type and flat. The screen layout or a table control is scrolled in the display so that the screen element on which the cursor is positioned is visible. If the specified screen element is not found, the statement is ignored.
If the specified screen element is part of a table control or a step loop, the line of the table control or group of the step loop in which the cursor is positioned on the specified screen element must be specified using the addition LINE. For the data object line, the type i is expected. If there is no line or group for the value of line, or the addition LINE is not specified, the statement is ignored. The statement is also ignored if the addition LINE is specified and the screen element is not part of a table control or step loop.
I hope this helps.
- April King

BDC coding for TABLE controls

how to write BDC coding based on Table Controls...

http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Cheers
VJ

How to bring cursor in Table control??

Hi to all
How to bring cursor in Table control when entering into screen
can anyone tell me??? pls explain with example..
thanks
senthil

Hi,
Check the below code
data l_tc_name             like feld-name.
data l_tc_field_name       like feld-name.
get actual tc and column
get cursor field l_tc_field_name
             area l_tc_name.
Regards,
Vind

Screen Variant for table control in FB60

Hi ,
I need to create variant to show Quantity and Base Unit of Measure columns in the table control which is available at the first screen of FB60 . I tried using the option screen variant - > create variant. i couldnt see the options of colmuns properties for table control on click that small icon available at the right conner. Pls guide.
Thanks

In transaction SHD0 you need to create a new variant.
After that you will be taken into FB60.
Press Enter as if you are trying to process vendor invoice. It will take you to a screen "Screen values 1100 Program SAPMF05A"
There you will have 3 columns Output only, Invisible and Mandatory.
Select as you want.
Just try out carefully, you will be able to get the desired result.
It is very difficult to guide you in details.
Please let me know if you face any problems.
Rgds,
Harmees

How to handle the table control While working with LSMW?

How to handle the table control While working with LSMW?

its possible in lsmw,
Hi,
LSMW will have a Indicator for headr and itam, i do not remember the correct field, but it will have an indicator, check the fields, there will be a single charecter lenght field, that should be the indicator, and using that we can write the logic.
check that single charecter field, it that is X that means the header record is processed, and do the items.
and, this is another way, try this out also
YOu can do this in "Define Source Structures" step,
the HEADER is defined first,
then the DETAIL below the HEADER.
add the fields to the structures.
Both should have some common key field
Please take care that the name of the common field is the same.
Once you do this it is linked. The you have a header and item corresponding to that header. then run the LSMW as you would.
Thanks

Set the cursor on table control

Hi All,
I am trying to create a table control.
Creation of table control is fine and i can update and save the records..But i am facing some strange problems.
When i close my program and rerun it, the Cursor will be position on the default field of last run.
How can we position the cursor on table control..Say to a particular row or columns?
Also i am not able to interpret the meaning of
Loop at itab with control control name cursor top_line/current_line.
Does this means that if you use top_line, cursor will be placed at the top line and when you use current_line , it will be placed at current line?
Regards
Miesh

Hi,
Check this link for sample code for Table Control
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=/library/webas/abap/abapCodeSamples/TableControlin+ABAP.pdf
http://members.aol.com/_ht_a/skarkada/sap/table_control/table_control.htm
Re: Table Control
Thanks & Regards,
Judith.
Message was edited by: Judith Jessie Selvi

BDC Recording for Table Control

dears,
I am using BDC for posting payments by TCode FP05.
after processing two payment items i am getting the following error.
"Runtime error SAPSQL_ARRAY_INSERT_DUPREC has occurred"
but when i repeat the same recording in foreground it processes the payment sucessfully.
wht could be wrong with the recording?
how to record for table control?
Bye

Hi Syed,
I could find few notes for the array insert duplicate runtime error.
136433
191544
You can find may in OSS.
Cheers
Vinod

IB51, IB52 : Page up & Page Down option for table control disabled

Hi experts,
IB51, IB52 Page up & Page Down option for table control is disabled.
We want to use these options in the table control while recording .
Can any one tell us?
Regards,
Lakshmi

Hi,
You can refer to Note 379208 .
The same is applicable in CRM too.
Thanks ,
Jomy

How can i extend the table control while transfering the data

hi
how can i extend the table control while transfering the data.

Hi,
For table control we have to handle the page down (P+, or what ever function codes are assigned to that activity) activity with our coding.
Just check out this code:
This is the bdc to update the XK01 transaction code (Vendor Creation).
Here we will use table controls for bankings. Here Iam sending the coding and text files.
Coding
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'. " Page down activity
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
**Flat files for the above code***
Intial screen data file.
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
Table control Data:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
Regards,
Kumar.

Table type not defined for table control "T_CONTROL" (Custom table)

Hi All,
I m facing a problem in ITS mobile service.
The Table control designed by me in R/3 (Module pool program) is
not getting displayed in ITS mobile page.
It is giving me an error "Table type not defined for table control "T_CONTROL" (Custom table) ".
Can you please let me how this issue can be resolved.
With Regards,
Mahesh

CONTROLS: table_ctr TYPE TABLEVIEW USING SCREEN '0010'.
try using this....
Regards
Vasu

Getting Cursor for Table control while scrolling

Similar Messages

Maybe you are looking for