Getting Data from 3G network while connected to Wifi without internet?

I have a Wifi network at home solely to play music wirelessly. There is no internet connection on this network. I want to be able to connect my iphone 4 to this network BUT get all data and surf done on the Iphone over the 3G net. This so I can use Wireless mouse and such applications on the phone and at the same time surf... It seems that when connected to my Wifi net the Iphone also trys to connect to internet through it and thus fails to fins a connection. Is there any settings to tell it to primarily search internet through 3G? And still stay connected to the "dead" Wifi network?

There is no setting on the iPhone to do what you want & since, by design, the iPhone will look for a data connection using the following priority: WiFi>3G>Edge>GPRS, I no of no way to accomplish what you want.

Similar Messages

Get data from two databases?

Hello all,
Do anyone know if it's posible to get data from two databases while I'm running SBO in one of them? I need this because our client wants to be able to print reports with all the information stored in both companies. I searched this forum trying to find if this is possible but I did't find any information about this.
Can someone help me?
Thanks and regards,
Mariana Mazzero

Hi Mariana,
What you can do is use two company objects to retrieve the data. As far as I know you're not restricted to one company connection.
You can also just use a standard read only connection (like ADO/ODBC) to retrieve the data for the reports.
Hope it helps,
Adele

How to get data from subsites list of SharePoint 2010 in ssrs

Hi,
Can someone help me on this issue.
I want to create a report using ssrs, I have some of the data in SQL and some of the data in sharepoint list.
First I need to go to SQL and get the data from the table which contains URL for the subsite in sharepoint.
after that I need to go to all the subsites and go to perticulat list in the subsites and get data from that list.
for example, their is a top level site "abc"
it contains sub site "123", "456","567", etc.. All this sub sites contain a list by name "Sample List", Now I need to go to that sub site list(Sample List) and get list-item column say "created By" which
is created on particular date.
in my report, I need to print the sub site "url/Title" which comes from SQL database and list-item column "Created By" of that sub site list "Sample List".
I tried using subreport inside a report by using "Microsoft SharePoint List" as a datasource, but when it comes to real time we don't know how many subsites will be created, so we can't create a datasource for each subsite site.
I guess we need to be using XML as a datasource, but how can we go to particular subsite in query while using XML, since all subsites have list with the same name ?
I appreciate your help.
Thank you,
Kishore

Hi Kishore,
SQL Server Reporting Services(SSRS) supports expression-based connection strings. This will help us to achieve the goal you mentioned in this case:
Create a new report
Create a Data Source in the report with the connection string like this:
http://server/_vti_bin/lists.asmx (We use static connection string instead of expression-based connection string now, as it is not supported to get fields based on expression-based connection string in design time. We will change it to be expression-based
connection string later)
Create the data set(as you have done using XML query language). Please use list name instead of GUID in the listName parameter.
Design the report(e.g. Add controls to the report)
Now, let's change the connection string to be expression-based. First, please add a parameter to the report, move this parameter to top. This parameter is used to store the sub site name.
Open the Data Source editor, set the connection string to be: ="http://server/" & Parameters!parameterCreatedInStep5.value & "_vti_bin/lists.asmx"
In the main report, pass the sub site name to the report we created above via the parameter created in step5
That is all.
Anyway, this is actually a SQL Server Reporting Service(SSRS) question. You can get better support on this question from:
http://social.technet.microsoft.com/Forums/en/sqlreportingservices/threads
For more information about Expression-Based connection string, please see:
http://msdn.microsoft.com/en-us/library/ms156450.aspx#Expressions
If there is anything unclear, please feel free to ask.
Thanks,
Jinchun Chen
Jin Chen - MSFT

ORA-01031: insufficient privileges from auxiliary database while connecting

i am getting this error ORA-01031: insufficient privileges from auxiliary database while connecting plz help.
TNS-01106: Listener using listener name VINAR has already been started
[oraclone@server VINTEST_server]$ tnsping VINAR
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 17-JAN-2013 19:10:49
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
/d04/oraclone/db/tech_st/11.1.0/network/admin/VINTEST_server/sqlnet_ifile.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=server.csacons.com)(PORT=1571)) (CONNECT_DATA= (SERVICE_NAME=VINAR) (INSTANCE_NAME=VINAR)))
OK (0 msec)
[oraclone@server VINTEST_server]$ rman target sys/change_on_install@VINAR auxiliary /
Recovery Manager: Release 11.1.0.7.0 - Production on Thu Jan 17 19:11:38 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
[oraclone@server VINTEST_server]$ sqlplus sys/change_on_install@VINAR as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Jan 17 19:31:52 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
Enter user-name: sys@VINAR as sysdba
Enter password:
ERROR:
ORA-01031: insufficient privileges
Enter user-name: [oraclone@server VINTEST_server]$
[oraclone@server VINTEST_server]$
SQL> select * from v$pwfile_users;
no rows selected
SQL>
listner.ora
SID_LIST_VINTEST =
(SID_LIST =
    (SID_DESC =
      (ORACLE_HOME= /d04/oraclone/db/tech_st/11.1.0)
      (SID_NAME = VINTEST)
      #(GLOBAL_DBNAME = VINAR)
      #(ORACLE_HOME= /d03/oravnr/db/tech_st/11.1.0)
      #(SID_NAME = VINAR)
      (SID_DESC =
      #(ORACLE_HOME= /d04/oraclone/db/tech_st/11.1.0)
      #(SID_NAME = VINTEST)
      (GLOBAL_DBNAME = VINAR)
      (ORACLE_HOME= /d03/oravnr/db/tech_st/11.1.0)
      (SID_NAME = VINAR)
tnsnames.ora
VINTEST=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=server.csacons.com)(PORT=1591))
            (CONNECT_DATA=
                (SERVICE_NAME=VINTEST)
                (INSTANCE_NAME=VINTEST)
VINAR=
        (DESCRIPTION=
                (ADDRESS=(PROTOCOL=tcp)(HOST=server.csacons.com)(PORT=1571))
            (CONNECT_DATA=
                (SERVICE_NAME=VINAR)
                (INSTANCE_NAME=VINAR)
kind regards
plz help

Pl do not post duplicates - ORA-01031: insufficient privileges from auxiliary database while connecting

Help get data from socket

hi all
i am trying to get data from socket www.yahoo.com site and try to write in file with following code
NOTE:here netClient is the soccket object accepted by server
File f=new File(finalpath);
BufferedReader fromClient = new BufferedReader(new InputStreamReader(netClient.getInputStream()));
OutputStream fo=new FileOutputStream(f);
String str;
try{
while((str=fromClient.readLine())!=null){
byte buf[]=str.getBytes();
fo.write(buf);
}catch(Exception e){}
finally{fo.close();}
But i am not getiing data from socket
please help
regards krunal

GeneralYerevan is absolutely right. Use URLConnection and you will get what you want. It seems to me that you do not know deeply how http works. The fact that you opened a connection to www.google.com doesn't mean that you will get data. The web server, after it accepts the socket object, waits for your request. In you case it is something like "GET / HTTP1.1", which you have to write to the stream. URLConnection does all this for you and all you have is to read the InputStream.

Getting data from mysql!! please could someone help me?

Hello people!!
I can't get data from a Mysql database through a jsp page, there's a error message of conversion,
here's my classes:
package teste;
public class GetDB {
    String str;
    Connection con;
    ObjectPage ob;
    public GetDB()throws Exception {
        try {
            Class.forName("org.gjt.mm.mysql.Driver");
            con = DriverManager.getConnection("jdbc:mysql://127.0.0.1/Loja?user=root&password=131283");
        } catch (Exception ex) {
            throw new Exception("Banco de dados n�o encontrado" +
                ex.getMessage());
    public ObjectPage getOb(){
        try {
            String selectStatement = "select * from teste";
            PreparedStatement prepStmt = con.prepareStatement(selectStatement);
            ResultSet rs = prepStmt.executeQuery();
            while (rs.next()) {
               str = rs.getString(1)+" "+rs.getInt(2);
            prepStmt.close();
            ob = new ObjectPage(str);
        }catch (SQLException ex) {
        return ob;
    public void setOb(ObjectPage ob){
        this.ob = ob;
}    and this:
package teste;
public class ObjectPage {
   String name;
   public ObjectPage(String nome) {
       name = nome;
   public String getName(){
       return name;
}and this is myjsp page:
<jsp:useBean id="dado" class="teste.GetDB" scope="page" >
<jsp:setProperty name="dado" property="ob" value="{$name}"/>
</jsp:useBean>
<%--<jsp:getProperty name="dado" property="propName"/> --%>
<p><b><h1><font color="orange">${dado.ob.name}</font></h1></b></p>so what's wrong? could you give me some tips? what should i do ?
Thanks a lot!!!

If there's an error message of conversion, are you sure that the 1st and 2nd columns returned in the result set are of type string & integer respectively (try getObject, then see what it's an instanceof)? Just guessing, maybe the actual database fields don't match the types you're expecting.
And why don't you try ex.printStackTrace() to see what the actual error is in the getOb method?

JMF getting data from tcp port

Hi there is any way that i can get data from tcp port uisng datasourece
mean i create a server port which accept the connection after established the connection then the client send audio data to the server, the server only will get that data in a buffer and using jmf datasource i should read that data and might send it to another machine using avtransmitter but i dont know how to wrape that data in rtp
private void Streamforward()
ServerSocket echoServer = null;
byte[] buffer=new byte[8192];
DataInputStream is;
PrintStream os;
Socket clientSocket = null;
// Try to open a server socket on port 4444
// Note that we can't choose a port less than 1023 if we are not
// privileged users (root)
try {
echoServer = new ServerSocket(4444);
catch (IOException e) {
System.out.println(e);
// Create a socket object from the ServerSocket to listen and accept
// connections.
// Open input and output streams
try {
clientSocket = echoServer.accept();
Convert con=new Convert();
is = new DataInputStream(clientSocket.getInputStream());
os = new PrintStream(clientSocket.getOutputStream());
int start=0;
while (true)
int length=clientSocket.getReceiveBufferSize();
System.out.println(length);
//line=in.readLine();
is.read(buffer,0,length);
//here we should put that data into datasourece
catch (IOException e) {
System.out.println(e);
it would be too help full i have to submitt my project soon and i dont know what to do:( with this data ....i am integratting skype with jmf

I've been looking around for the same solution for my client (who using Mettler Toledo's (MT) products). Anyone did this please kindly share your experience, thanks.
My initial approach was to write a Java middle-ware to read from the real-time system and upload into JDE from there.
I wonder if MT stored the weighing data somewhere in some database ...
Any other hardware vendor out there to make our life easier?
Additional:
Just got a way that might work, use Java or JNI to read from Serial port (RS-232) or USB, then proceed from there (provided your hardware with that communication protocol).
Cheers,
Avatar Ng
Edited by: user2367131 on Aug 18, 2009 6:34 AM

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

How can i get data from another database SQL Server use database link from

I have a database link from Oracle connect to SQL Server database with user cdit connect default database NorthWind.How can I get data from another database(this database in this SQL Server use this database link)?

hi,
u should see following documentation:
Oracle9i Heterogeneous Connectivity Administrator's Guide
Release 1 (9.0.1)
Part Number A88789_01
in it u just go to chapter no. 4 (using the gateway),,u'll find ur answer there.
regards
umar

Cant get data from text file to print into Jtable

Instead of doing JDBC i am using text file as database. I cant get data from text file to print into JTable when i click find button. Goal is to find a record and print that record only, but for now i am trying to print all the records. Once i get that i will change my code to search desired record and print it. when i click the find button nothing happens. Can you please take a look at my code, dbTest() method. thanks.
void dbTest() {
DataInputStream dis = null;
String dbRecord = null;
String hold;
try {
File f = new File("customer.txt");
FileInputStream fis = new FileInputStream(f);
BufferedInputStream bis = new BufferedInputStream(fis);
dis = new DataInputStream(bis);
Vector dataVector = new Vector();
Vector headVector = new Vector(2);
Vector row = new Vector();
// read the record of the text database
while ( (dbRecord = dis.readLine()) != null) {
StringTokenizer st = new StringTokenizer(dbRecord, ",");
while (st.hasMoreTokens()) {
row.addElement(st.nextToken());
System.out.println("Inside nested loop: " + row);
System.out.println("inside loop: " + row);
dataVector.addElement(row);
System.out.println("outside loop: " + row);
headVector.addElement("Title");
headVector.addElement("Type");
dataTable = new JTable(dataVector, headVector);
dataTableScrollPane.setViewportView(dataTable);
} catch (IOException e) {
// catch io errors from FileInputStream or readLine()
System.out.println("Uh oh, got an IOException error!" + e.getMessage());
} finally {
// if the file opened okay, make sure we close it
if (dis != null) {
try {
dis.close();
} catch (IOException ioe) {
} // end if
} // end finally
} // end dbTest

Here's a thread that loads a text file into a JTable:
http://forum.java.sun.com/thread.jsp?forum=57&thread=315172
And my reply in this thread shows how you can use a text file as a simple database:
http://forum.java.sun.com/thread.jsp?forum=31&thread=342380

How to get data from Oracle using Native SQL in SAP.. Problem with date

Hi Masters.
I'm trying to get data from an Oracle DB. I was able to connect to Oracle using tcode DBCO. The connetion works fine
I wrote this code and it works fine without the statement of where date > '01-09-2010'
But i need that statement on the select. I read a lot about this issue, but no answer.
My code is (this code is in SAP ECC 6.0)
DATA: BEGIN OF datos OCCURS 0,
      id_numeric(10),
      component_name(40),
      comuna(10),
      record_id(10),
      status,
      sampled_date(10),
      END OF datos.
DATA: c TYPE cursor.
EXEC SQL.
connect to 'LIM' as 'MYDB'
ENDEXEC.
EXEC SQL.
SET CONNECTION 'MYDB'
ENDEXEC.
EXEC SQL PERFORMING loop_output.
SELECT ID_NUMERIC, COMPONENT_NAME, COMUNA, RECORD_ID, STATUS, SAMPLED_DATE
into :datos from lims.SAMP_TEST_RESULT
where     date > '01-09-2010'
ENDEXEC.
EXEC SQL.
disconnect 'MYDB'
ENDEXEC.
How can i get the data from that date?? If i delete the where statemet, the program works well, it takes 30 mins and show all the data, I just need the data from that date.
Any help
Regards

Please refer the example in this link which deals with Oracle date format.
You can finnd a command DECODE which is used for date formats. If you have a look at whole theory then you will get an idea.
Link:[Bulk insert SQL command to transfer data from SAP to Oracle|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bulk-insert-sql-command-to-transfer-data-from-sap-to-oracle-cl_sql_connection-3780804]

Re; Getting data from a live web site, based on geo-location.

re; Getting data from a live web site, based on geo-location.
Approx 4 minutes 25 seconds into this YouTube Adobe ELearning video for Common JavaScript Interface in Adobe Captivate 8, the topic of extracting data from a live web site http://api.openweathermap.org
Is there anywhere we can download this Adobe Captivate weather ticker project? or get some more complete tutorial on setting it up? I tried to copy some of the code shown in the video, but can't get it to work, so I suspect I'm missing something somewhere.
I would like to try it out.
Video Here: https://www.youtube.com/watch?v=u1ZfG47k24k

Could windows Firewall be stopping this geo-location weather ticker app from working? When I start Captivate 8, I get the message indicating the the firewall is blocking some features of the program. When I check the geo var it seems empty.
Name: AdobeCaptivateWS
It then refers to some temp folder such as
Path: C:\users\{username}\appdata\local\temp\cp3320604394session\cptrustfolder3320604659\adobec aptivatews
Network Location: Public, private, domain networks
etc...

Trying to use FTP to get data from a different server

Hi Friends,
    I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
   Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = V_PASSWORD
      SOURCELEN   = V_PWD_LEN
      KEY         = CS_KEY_500098
    IMPORTING
      DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = 'test'
      PASSWORD        = V_PASSWORD
      HOST            = '176.0.1.6'
      RFC_DESTINATION = 'SAPFTPA'
    IMPORTING
      HANDLE          = MI_HANDLE
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = MI_HANDLE
      COMMAND       = CMD
    TABLES
      DATA          = MTAB_DATA1
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3
      OTHERS        = 4.
IF SY-SUBRC = 0.
    LOOP AT MTAB_DATA1.
      WRITE: / MTAB_DATA1.
    ENDLOOP.
ELSE.
    CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
    WRITE: / ERROR.
ENDIF.

Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ).     -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = S_PWD
      SOURCELEN   = DSTLEN
      KEY         = KEY
    IMPORTING
      DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = P_USER                   -
> Username
      PASSWORD        = S_PWD             -
> password
      HOST            = P_HOST                  -
> Host
      RFC_DESTINATION = P_DEST         -
> Destination
    IMPORTING
      HANDLE          = HDL
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = HDL
      COMMAND       = 'set passive on'
    TABLES
      DATA          = RESULT
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE1
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME1
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE2
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
      EXPORTING
        DESTINATION          = P_DEST
      EXCEPTIONS
        DESTINATION_NOT_OPEN = 1
        OTHERS               = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.                    " FTPCON
Hope it helps.....

Is it possible to get data from a smashed/broken iPod touch 4th gen?

Is it possible to get data from a smashed/broken iPod touch 4th gen?

- If when you connect the iPod to your computer it appears in iTunes then you can make a backup and then restore another iPod or other iOS device from that backup.
- Otherwise you will have to go to a data recovery company.
- When I go to the YouTube link I can't get the video to play.

Getting Data from 3G network while connected to Wifi without internet?

Similar Messages

Maybe you are looking for