Getting data from eCommerce websites

hi Gurus,
Can you guys let me know how to create an interface to fetch data from eCommerce websites into SAP.

Hi Hemanth,
I am not sure if this will be feasible, but perhaps you can <b>try accessing the RSS feeds</b> of the data that you need. I know about accessing the feeds from Enterprise Portal such that it even gets updated as the data on the actual site gets updated, but I am not very sure if it will work with XI. But, there is some hope since the feeds are XML content which XI can understand.
Regards,
Sushumna

Similar Messages

How to get data from live site using C# on grid view

hi, how am I able to get data from a website and display it in a grid view ?
Can anyone show me how I would do this? Thanks

Hello,
This post does not fit to this forum, read the
stickies.
Regards, Eyal Shilony

How to GET data from external secure website?

We are trying to get data from a secure website. It is something like I try to get my bank statement online, where I have a user id and password to the secure website and try to get the data from XI.
Does anybody have any idea how we could do it? What adapter should be used.
I would really appreciate your help and award points.
Thank,
Arjun.

Hi,
Depends on how u are connecting to the website and getting the data.
But you can do this using HTTP/Java Proxies. You can use HTTP if you are connecting via a URL. thats the most standard procedure.
Regards
vijaya

Only in firefox: certain websites are blocked by google analytics, "getting data from.." on statusbar, why?

When entering some websites the startpage is shown fore maybe half a sec. then a blank page and message "getting data from google.analytics.com" on statusbar and a progressbar stuck on 3/4. No problem entering the site in IE.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How to read data from a website

Hello Everyone..
I hav a interesting scanario..
Is it possible to read data from a website..!!!
My scenario is to read a bank statement from a banks website(internet banking)..
using the same authentication my application must be able to pull the data from the website and update my r3...
Please crack this out for me..
Awaiting for solution..
Thanks in advance

check whether the bank offers webservice to get this data, if yes either from ABAP of JAVA you can consume this webservice to get the bank statement.
else
from abap you can use cl_http_client to make your ABAP to act as http client to read data from that website. (search weblog and ABAP forums for cl_http_client - there are lot of examples)
Regards
Raja

How to read data from a website based on user inputs through java programmi

Hi
I want to get information from a website based on some inputs that I have. The inputs change everytime and based on them, different output is expected. How do I go about with it? Please advice...
Will data mining help in this? or is it used only for analysis and predictions?

you can get the webpage you need very simply like this :
Test.java
public class Test{
          public static void main(String[] args) {
               URLClient client = new URLClient();
                        // URL of a webpage
               String webPage = client.getDocumentAt("http://content-ind.cricinfo.com/slvind/engine/current/match/343730.html?template=desktop;view=main;wrappertype=desktop");
               System.out.println(webPage);
     }URLClient.java
     import java.net.*;
     import java.io.*;
     public class URLClient {
          protected URLConnection Connection;
               public String getDocumentAt(String urlString) {
                         StringBuffer document = new StringBuffer();
                         try {
                                        URL url = new URL(urlString);
                                        URLConnection conn = url.openConnection();
                                        BufferedReader reader = new BufferedReader(new InputStreamReader(conn.getInputStream()));
                                        String line = null;
                                        while ((line = reader.readLine()) != null)
                                             document.append(line + "\n");
                                        reader.close();
                                   } catch (MalformedURLException e) {
                                   System.out.println("Unable to connect to URL: " + urlString);
                                   } catch (IOException e) {
                                   System.out.println("IOException when connecting to URL: " + urlString);
                              return document.toString();
          }

Capturing data from a website

Hello,
I would like to capture data from websites, or get a snapshot
of a given URL. I was wondering how this would be posible using
Java.
Any help or comments will be greatly appreciated.
Chanie

Thanks, that worked beautifully.
I was wondering if you could help me with one more point.
There are some webpages that before getting to them you must
give a username and password. I was wondering how I could get
data from such a webpage if I know the username and password
using Java.
Thanks in advance.

How to retrieve data from other websites?

Hi all,
Don't know if anyone can point me in the right direction.
How can I retrieve or fetch data from other website’s (*Database*) ?
I’m trying to build a web application that would retrieve and fetch data from other website’s (Database) like the www.comparethemarket.com.
The data I’m trying to fetch it is in database, in my opinion I think I have to make a http web request then send parameters, then get the result. I could not find any tutorials
on the web,
Thank you.

Fahad_24 wrote:
Hi all,
Don't know if anyone can point me in the right direction.
How can I retrieve or fetch data from other website’s (*Database*) ?
I’m trying to build a web application that would retrieve and fetch data from other website’s (Database) like the www.comparethemarket.com.
The data I’m trying to fetch it is in database, in my opinion I think I have to make a http web request then send parameters, then get the result. I could not find any tutorials
on the web,
Thank you.Unless the website provides an interface to their data, you are most likely not even allowed to do this. There is only one way to find out: contact them and ask about it or look around their website if their is a manual that describes how to do it. If there is such an interface, it will usually be some kind of web service (such as a SOAP interface).

Can we get data from business views in CR 2008/XI?

Hi All,
Can we get data from business views in CR 2008/XI?
If its possible, pls let us know how to get connect with Business View in both of these versions and what is the tool that we have to use to create Business Views.
Thank you,
Krishna Pingali

Hi Krishna,
Crystal Reports/BusinessObjects Enterprise ( BOE ) Business Views can only be created using the BV build which comes with BOE and installed using the Work Station installer for BOE. for both XI and 2008.
You cannot mix these two versions on the same PC not can one talk to the other, the BV designer must match the same version as BOE. XI ( version 11.0 ) is no longer available but if you mean XI R2 ( version 11.5 ) then it still is.
It's not completely clear which Business View you are referring to? BOE has a Business View Designer so not sure if this is just a naming problem or not? If you are referring to the BOE Business View Designer then the above is true. If your reference is about some other BV designer or data source then you need to clarify.
Contact our Sales department for pricing and availability.
Thank you
Don

How to get data from hard drive in dead iMac?

I have an old slot-loading iMac (350Mhz G3 blueberry) that just died, probably a dead power supply or something. Won't turn on at all. I don't care about restoring it, I just want to take the hard drive out and grab data from it. I've found instructions for removing the HD ... but any tips on the best/cheapest way to hook it up to get data from it? It's EIDE I believe from what I've read so far. Thanks for any help.

Hey Richard.....Thanks for the reply to my question about my wife's dead iMac.....
Her iMac had been acting up lately, mostly to do with her Outlook Express freezing up in OS9. I dunno if OS9 was freezing or if the application was failing. Regardless, I would have to quit OS9, restart Outlook which at the same time restarted OS9. All would be fine for a while, a day or two and then the scene would repeat itself. But I think that issue is separate from the iMac being "dead". Often we have power outages in the area, more than we should. I had the iMac plugged into a battery backup, some APS product I think it is. I believe it is only good for less than an hour as we have other devices drawing on it too. Most of our power outages are of short duration, just enough to be aggravating, sometimes having to reset clocks, etc...And a couple times, I would have to reset the time and date on the iMac so this told me that the PRAM battery was below minimum voltage. But the iMac would ALWAYS restart, even with the low battery. But the most recent outage, about one hour duration, did in the iMac, somehow or other. I do believe the battery backup basically fully discharged. So I removed the battery, could not find a new battery locally so I drove to the big city and paid the local Apple service dealer a visit. I got ripped big time price wise, embarrassed to say. So I get home, put the battery in the holder, depressed the CMU reset, the powerbutton illuminated as did a green LED by the memory modules for less than three seconds and then quit. I also heard the HD trying to spin up and a high voltage THUMP which I assume is the CRT trying to ignite. If I unplugged the iMac, removed the battery, plug in the power again and hit the power button, the iMac would repeat the same short on period and then quit. So it did not seem to make any difference if there was a battery in place. I read somewhere to pull the battery, pull the AC cord, hold down the power button to dump any current (?) and let the unit sit for 24hrs. After that length of time, I was supposed to replace the battery, depress the CMU reset, wait ten seconds and then feed it AC. Well, when I pressed the power button, I heard life for maybe five seconds, maybe a second longer, then a beep and then it shut down. I pulled the AC cord, pulled the battery, re-inserted the battery, depressed the CMU reset, waited a few seconds, plugged in the AC cord, depressed the power button and I am back at the under three seconds of "power-up" and then nothing, dead, no beep, nothing. I think maybe it is a waste of time trying to mess with this unit, looking for a newer iMac on eBay, the snowball series with the 17" LCD, might be time better spent. Hate throwing stuff away, that's why I am up to my ears in junk, maybe u know that scenario. The wife likes my 19" ACER LCD screen, hooked up to this old dual 800mhz, though she dislikes the noise and the tower. But we both agree the large LCD screen is much easier on our aging eyes than the old iMac CRT. Anyway, I appreciate your help, always GREAT to correspond with an Apple fan.....John Bauer

Funds management cube getting data from 4 ods, data not seen in cube

Hello all,
I am working on funds management cubes (0PU_C02 and 0PU_C03). These two cubes get data from like 7 or 8 ODS. Can someone tell me which are the ODS which feed to respective cubes. I have the mappings done but i am getting very confused.
In the ods 0PU_O44 there is RLDNR for Ledger and I can see that data in ODS but when i run load to cube I dont see the ledger data (its direct mapping there are no routines or rules).
Is there any sequence with wihic we have to load the data?
Thanks
Message was edited by: Raj M

Hi Raj,
I was going thru the forums who has knowledge in Public sector when i came accross ur forum.Can i get your email id..i have some questions to ask regarding student administration.
thanks.

Powerpivot Error on Refresh -- "We couldn't get data from the data model..."

I'm using Excel 2013 and Windows 8.1. I have a spreadsheet I've been using for over a year, and I've just started getting this error message when I try to refresh the data.
"We couldn't get data from the Data Model. Here's the error message we got:
The 'attributeRelationship' with 'AttributeID' - 'PuttDistCat9' doesn't exist in the collection"
Any idea how I can fix this problem? I haven't changed anything related to that particular attribute. All the data is contained in separate sheets in the workbook, so there are no external sources of data.
Thanks.
Jean

Thanks for all the suggestions.
I found a slightly older version of the spreadsheet that still refreshes properly, so I don't think I have any issues with the version of Excel or Power Query. (I've had this same error before, and I believe I applied the hotfix at that time.)
I think this problem started after I updated a number of the date filters in the pivot tables. I haven't made any changes to the data model, and the only updates I've made were to add data (which I do all the time), and to change the date filters on
the pivot tables.
As suggested, I added a new pivot table querying one table (the table with the attribute that shows up in the error message), and it worked fine. I can also refresh this pivot table.
Then I tried adding a pivot table which went against several tables in the data model (including the table in question). The pivot table seemed to return that data properly. However, when I tried to refresh it, I got the same error message ("we
couldn't get data from the data model...").
Dany also suggested running the queries one at a time to see which one is in error. Without checking all the pivot tables, it appears that any which use the table "HolePlayedStrokes" generate the error (this is the table with the attribute
mentioned in the error message). Pivot Tables without that particular table seem to refresh OK. Unfortunately, that is the main table in my data model, so most of the pivot tables use it.
Any other suggestions? I'd be happy to send a copy of the spreadsheet.
Thanks for all the help.
Jean

Get date from Oracle when local time zone is different from Oracle time zon

Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send e.g. 28.06.2002, but in Oracle date is save as 27.06.2002 01:00 (hour=01 , I suppose that is because java.sql.Date hasn't time the Oracle set it time = time zone=+1) And when I get date from Oracle I get incorrect date. In SQL I don't use date masks. Maybe solution is to use java.sql.Timestamp object (when save date to Oracle) instead of java.sql.Date?
But if I save date at e.g. 01:00 clock and send e.g. 28:06.2002 in Oracle, date is save as 28.06.2002 01:00 and when I read from Oracle I get correct date.
Thank you.

Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send
e.g. 28.06.2002, but in Oracle date is save as
27.06.2002 01:00 (hour=01 , I suppose that is because
java.sql.Date hasn't time the Oracle set it time =
time zone=+1) Presumably you are using setTimestamp() to store the value. If you are explicitly using a varchar (string) then you will have to correct the timezone your self.
And when I get date from Oracle I get
incorrect date. In SQL I don't use date masks. Maybe
solution is to use java.sql.Timestamp object (when
save date to Oracle) instead of java.sql.Date?The method setDate/getDate store a 'date' which is not the same as a 'date and time' for which setTimestamp/getTimestamp are used.
But if I save date at e.g. 01:00 clock and send e.g.
28:06.2002 in Oracle, date is save as 28.06.2002
01:00 and when I read from Oracle I get correct date.
Thank you.

Get date from Calendar Promt

Hi Experts,
Is it possible to get date from Calendar Prompt when operator is "greater then or equal to". In this setting I can not set presentation variable for prompt, why? There is other way to get selected date?
Thanks in advance for any suggestion
Regards,
Esk

Eskarina wrote:
Hi Experts,
Is it possible to get date from Calendar Prompt when operator is "greater then or equal to". In this setting I can not set presentation variable for prompt, why? There is other way to get selected date?
Thanks in advance for any suggestion
Regards,
EskThe reason the Set Variable piece disappears is because a presentation variable cannot contain multiple values. If you want to perform a calculation on a date to filter your report, do this:
1) Keep the Operator as "is equal to/is in."
2) Now set your PV to what you want.
3) In your report, build a CASE statement or use the TIMESTAMPADD function to make whatever calculation you want.
Example: Let's suppose you wanted to filter your report for all Sales Dates "greater than or equal to" the prompt selection. You would set the date prompt to "equal" a date a user selects and then save it to your Presentation Variable, say pv_SalesDate.
Now in your report on your Sales Date column, put a filter like this:
tablename."Sales Date" >= '@{pv_SalesDate}'
This will achieve what you are looking for.

Get date from portal in a web dynpro?

hi all,
how get date from portal in a web dynpro???
thanks.

new Date(System.getTimeInMillis());
Good luck, Roelof

Getting data from eCommerce websites

Similar Messages

Maybe you are looking for