Getting data into a JSF application by posting it via http

(My apologies if there is a thread for this topic - I am not sure what to search for to find if one already exists)
I have 2 applications - the first is a JSF application into which the user logs in, and accesses various tools. The second is a swing app into which the user logs in and accesses various other tools. The logins are universal - one user, one login, two applications. I am providing a link in the swing app to launch the jsf app. I would like the swing app to pass the user identification when launching the JSF session/browser so the user isn't required to type the info again.
(I am guessing I can use a JSP call to bridge the two - something that pulls off the id, and plugs it into the session bean? Just not sure how to do that or if there is a better way)
Many thanks in advance for any assistance!!!

Hi,
thank you for your answers:-)
In conclusion the result is:
1) There is no "direct" way to read POST-Parameter in WebDynPro ABAP
=> You have to write a wrapper in BSP or an ICF - HTTP_REQUEST_HANDLER
(A ABAP-Class that implements the Interface "IF_HTTP_EXTENSION"
that reads the POST-Parameter-Value and transfers the value into a reachable localtion for WebDynPro-Abap.
2) For parsing the XML-Data I can use for example STRANS tcode or Simple Transformations
3) For transfering the Data between the BSP / the Request-Handler and WebDynPro for ABAP, I can use for example SharedMemory, Shared Objects.
Regards
Steffen
Edited by: Steffen Spahr on Jul 19, 2011 8:35 AM
Edited by: Steffen Spahr on Jul 19, 2011 8:55 AM

Similar Messages

How to get data into BI system

Hi Experts,
         I am a newbie to SAP BI. Please guide me how to get the data from tha R/3 tables into BI system tables. When I check the data in SE11 in R/3 (for ex: VBAK, VBAP...... etc), I could see all the records. Now how can I get the same data in BI system tables? When I check in BI system with Tcode SE11, I couldn't find any data for the tables VBAK,VBAP..... etc. Please guide me how to fill these tables in BI from R/3. Points will be rewarded for the solutions.
Regards,
Ravi

Hi Ravi,
    U can follow the link and know how to get data from R/3 to BI.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/28/4c553c42360a40e10000000a114084/frameset.htm">data sources</a>
   Still I give overview to u. U need to create data source in R/3 side, replicate them in BI and use them in your info source to load the data. Data source are of two type application specific (system generated) and generic (customer defined). Data Extraction can be based on table, view or infoset query.
hope this helps.
Regards,
Purvang
Assigning Point is to say Thanks in SDN *

Getting data into an applet

I am creating an applet to draw graphs.
I have only made standalone applets before.
My data will come from a database.
The user will have the data selected for them, when they select the applet page, the data to be drawn will already have been selected.
i.e. I only need to give data across in the initialisation stage of the applet.
What is the standard way to get data into an applet?
By a giving a file path, by direct contact with the DB, with direct contact with another servlet or by giving the data in the HTML page the Applet is contained in.
(The data will come from the same server as the applet)
Maybe somone can point me to a tutorial on this?

I am currently developing some graph applets, too. At first I implemented direct database access via JDBC, but found out, that this ain't suitable, because you can get in serious trouble with customers who don't want to open database tcp ports in their internal firewall system which - from a security point of view - is a good decision.
So I gathered information about other methods to get data across the network. RMI needs own ports just like JDBC. Direct access to port 80 would be a good, so one could use Java's network capabilities. But this needs lots of coding on both ends (server and client-applet) and so takes time and is error prone.
Using SOAP leads to fat applets and so I gave XML-RPC a try. In my case I have an XML-RPC server written in PHP (using the PEAR module see: http://pear.php.net ) and in my applet I use the XML-RPC library from the Apache Group (see: http://ws.apache.org/xmlrpc/ ). This works just fine!
Pros:
- small library code in applet (less than 200 KB)
- only needs one network port. standard is 80 (http) which is almost everywhere available
- applet code is independent from server code and architecture, as almost every language has some XML-RPC module (other than RMI being a Java-only solution)
- free of charge & open source
- reliable
Cons:
- based on XML it can slow down things a bit when lots of data has to be sent over a slow network link - but that's more of a general problem in network application development
- other than SOAP/RMI you can not transmit/access whole objects but only data of primitive types (int, boolean, string, ..), so you have to wrap and unwrap your data
By now I am very pleased with the decision I made earlier this year. :)

Not getting data into 3rd int table

Hi all,
         here i ve data in 2 internal tables. this data i want store into 3rd internal table, here am adding with inner join but am not getting data into 3rd one.
plz check my logic.
REPORT ZEXCHANGE_RETES                         .
TABLES : tcurr,           " Exchange Rates
         /msg/rabr.       " Account (Posting Headers)
DATA : l_date type datum.
TYPES : begin of t_tcurr,
        kurst like tcurr-kurst, " Exchange Rate type
        fcurr like tcurr-fcurr,   " From Currrency
        gdatu like tcurr-gdatu,   " Date as of which
    end of t_tcurr.
TYPES : begin of t_rabr,
        OW_WHGNR like /msg/rabr-OW_WHGNR,
        bil_dat like /msg/rabr-bil_dat,
        abrnr like /msg/rabr-abrnr,
       end of t_rabr.
TYPES : begin of t_output,
        kurst like tcurr-kurst,
        fcurr like tcurr-fcurr,
        gdatu like tcurr-gdatu,
        OW_WHGNR like /msg/rabr-OW_WHGNR,
        bil_dat like /msg/rabr-bil_dat,
        abrnr like /msg/rabr-abrnr,
       end of t_output.
DATA : it_output TYPE STANDARD TABLE OF t_output WITH HEADER LINE,
        wa_output TYPE t_output.
DATA : it_rabr TYPE STANDARD TABLE OF t_rabr WITH HEADER LINE,
        wa_rabr TYPE t_rabr.
DATA : it_tcurr TYPE STANDARD TABLE OF t_tcurr WITH HEADER LINE,
        wa_tcurr TYPE t_tcurr.
getting data into 1st itab
SELECT kurst fcurr gdatu
          from tcurr into table it_tcurr
          where kurst EQ 'M'.
          SORT it_tcurr by fcurr GDATU DESCENDING.
          delete adjacent duplicates from it_tcurr comparing fcurr.
getting data into 2nd itab
   SELECT * FROM /msg/rabr into CORRESPONDING FIELDS OF TABLE it_rabr.
    SORT it_rabr BY OW_WHGNR bil_dat abrnr.
getting data into 3rd itab
SELECT t~kurst
        t~fcurr
        t~gdatu
        r~OW_WHGNR
        r~bil_dat
        r~abrnr
        FROM tcurr as t INNER JOIN
        /msg/rabr as r on tfcurr EQ rOW_WHGNR into table it_output
        WHERE rabrnr BETWEEN '00000000000000800251' AND '00000000000000800300' AND rbil_dat < wa_tcurr-gdatu.
printing output
LOOP at it_output into wa_output.
WRITE: /10 wa_output-kurst,
         15 wa_output-fcurr,
         25 wa_output-gdatu,
         50 wa_output-OW_WHGNR,
         60 wa_output-bil_dat,
         80 wa_output-abrnr.
ENDLOOP.
here am not getting data into 3rd i tab.
Thanks & Regards,
sudharsan.

Hi,
The select command is the most fundamental function of writing ABAP programs allowing the retrieval of data from SAP database tables.
Try filling the 3rd internal table with Loop ... Endloop.
Loop at t_tcurr.
Read table t_rabr with key field1 = t_tcurr-field1.
If sy-subrc = 0.
Move t_tcurr-field1 = itab_final-field1.
Move t_tcurr-field2 = itab_final-field2.
Move t_rabr -field3 = itab_final-field3.
Move t_rabr -field4 = itab_final-field4.
Append itab_final.
Endloop.
Hope this helps you.
Regards,
Ruthra

How to transfer XML-Data into a WebDynPro-Application?

An external partner has a calling interface that sends a HTTP-Redirect to a specific application-url and transfers all the data in one POST-Parameter.
The value of this POST-Paramater (CALLINTERFACE) consists the XML-Data.
<form id='InterfaceData3' method='post' action='/ProduktFrontController/Start'>
<textarea cols="80" rows="30" name='CALLINTERFACE'><?xml version="1.0" encoding="UTF-8"?>
<authentifizierung version="1.0">
     XML-Data.....
</authentifizierung>
<br>
<p><input id='button1' type='submit' name='Button' value='Absenden'></p>
</form>
Standard-Java:
In our Java-Application we can read the POST-Value (XML-Data) via the HTTPServletRequest-Object/Instance.
WebDynPro-Java:
IWDProtocolAdapter protocolAdapter = WDProtocolAdapter.getProtocolAdapter();
IWDRequest request = protocolAdapter.getRequestObject();
String xmlData = request.getParameter("CALLINTERFACE");
In WebDynPro for ABAP I couldnt find a equivalent solution /technic to read the POST-Parameter-Value.
So I have to write a lot of annoying 'glue-code':-(      (HTTP-Request-Handler for reading, Shared Memory / Objects for transfer to WebDynPro ABAP),
(Remark: It's no solution to transfer XML-Data via a URL-Parameter because it is too big (> 1 KByte) and the external partner doesn't support this option!).
My questions:
1) What technics for transfering Data (not only 2 or 3 Parameter) form external web-applications into WebDynPro ABAP applications does SAP support?
2) Is it possible to reach the calling HTTP-Request from WebDynPro-ABAP? (MayBe via ABAP-Callback-Functions)
Sincerely
Steffen

Hi,
thank you for your answers:-)
In conclusion the result is:
1) There is no "direct" way to read POST-Parameter in WebDynPro ABAP
=> You have to write a wrapper in BSP or an ICF - HTTP_REQUEST_HANDLER
(A ABAP-Class that implements the Interface "IF_HTTP_EXTENSION"
     that reads the POST-Parameter-Value and transfers the value into a reachable localtion for WebDynPro-Abap.
2) For parsing the XML-Data I can use for example STRANS tcode or Simple Transformations
3) For transfering the Data between the BSP / the Request-Handler and WebDynPro for ABAP, I can use for example SharedMemory, Shared Objects.
Regards
Steffen
Edited by: Steffen Spahr on Jul 19, 2011 8:35 AM
Edited by: Steffen Spahr on Jul 19, 2011 8:55 AM

Get data into custom field.

hi all,
Can you please tell me how to get data of particular Business Partner field into the custom field which is enhanced in the business activity (BO:bus2000126) of activity partner.
Regards,
Ankush.

hi,
->For getting data from table into Adobe Forms, you need to add code in your WD application only.
-> You create an UI Element (Interactive Form) for the adobe forms in the Layout.
-> Give the name of your form (Zpdf) in the Template Source property.
-> A pop up will appear asking you to make contexts in your application by its own.
-> Click on Ok and then context will also appear in your Wd application.
-> Now you can use the context and write the code for getting values in Wddoinit or anywhere you want.
-> Write select/query or call a FM to fetch the data into an internal table.
->Finally bind the internal table with the Contexts created.
Check out this link :
/people/bhawanidutt.dabral/blog/2007/11/15/how-to133-integrate-adobe-form-on-webdynpro-for-abap-and-deploy-it-on-portal
I hope it helps.

Function module to get data into internal table from Excel file sheets

Hi,
I have to upload customers from excel file.
we are donloading customer data excel file sheets.
Customer data in 1 sheet, tax data the other sheet of same excel file, Customer master-Credit data in other sheet of same excel file.
so i have 3-4 sheet in one excel file.
now my requirement is to get the data from excel file into internal table.
is there any function module.
Thanks & Regards

I am sending you the idea with an example how you can upload data from an EXCEL file into an internal table. I am not sure if you can take data from different sheet in the same EXCEL file. I think that this is not possible (try it )
Upload the data into an internal table, like the way that I am describing in the above:
DATA: L_MAX_COL_NB TYPE I.
DATA: l_file_name LIKE RLGRAP-FILENAME.
Just to be sure that is the correct type for the FM.
l_file_name = P_FILE_NAME.
L_MAX_COL_NB = 58. "Maximum nb of colums that the FM can read.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            FILENAME                = l_file_name
            I_BEGIN_COL             = 1
            I_BEGIN_ROW             = 2
            I_END_COL               = L_MAX_COL_NB
            I_END_ROW               = 9999
       TABLES
            INTERN                  = PT_EXCEL
       EXCEPTIONS
            INCONSISTENT_PARAMETERS = 1
            UPLOAD_OLE              = 2
            OTHERS                  = 3.
IF SY-SUBRC <> 0.
ENDIF.
Now you should upload the data into your own itab. The Function Module will return to you all the an itab
from all fields and columns. Define the structure of the uploading file into SE11 - Data Dictionary. Then read the fieldcatalog of this structure. In the code that I am sending to you, I am insearting an empty line into the internal table and then I am assigning this line into a corresponding field-symbol. Then I am able to change the working area - so and the line of the itab. Propably you could you the statement APPEND INITIAL LINE TO (your_table_name) ASSIGNING <your_field_symbol>, but the example was written in an old SAP version.
FIELD-SYMBOLS:
                 <F_REC> LIKE WA_UPLOAD_FILE,      "working are of the uploading file
                 <F_FIELD> TYPE ANY.
DATA: COLUMN_INT TYPE I,
        C_FIELDNAME(30) TYPE C.
PERFORM GET_FIELDCATOLG TABLES FIELDCAT
                           USING 'ZECO_CHARALAMBOUS_FILE'.
LOOP AT PT_EXCEL.
    AT NEW ROW.
      ASSIGN WA_UPLOAD_FILE TO <F_REC>.
    ENDAT.
    COLUMN_INT = PT_EXCEL-COL.
    READ TABLE FIELDCAT INTO WA_FIELDCAT INDEX COLUMN_INT.
    CONCATENATE '<F_REC>-' WA_FIELDCAT-FIELDNAME INTO C_FIELDNAME.
    ASSIGN (C_FIELDNAME) TO <F_FIELD>.
    <F_FIELD> = PT_EXCEL-VALUE.
    AT END OF ROW.
      APPEND WA_UPLOAD_FILE TO GT_UPLOAD_FILE.
      CLEAR WA_UPLOAD_FILE.
    ENDAT.
ENDLOOP.
With Regards
George
Edited by: giorgos michaelaris on Mar 4, 2010 3:44 PM

Getting data into internal table wa_final

Hi Guys
I have change the logic for this program , I have created 2 workareas and internal table now I need help to place the data into
     wa_final-max_date = wa_data-idate.
         wa_final-min_date = wa_data-idate.
         wa_final-max_km = wa_data-recdv.
         wa_final-min_km = wa_data-recdv.
         wa_final-max_hR   = wa_data-recdv.
         wa_final-min_hR   = wa_data-recdv.
         wa_final-max_lit = wa_data-recdv.
         wa_final-min_lit = wa_data-recdv.
         wa_final-t_max_min_km   = wa_data-recdv. " min_km - max_km
         wa_final-t_max_min_hr = wa_data-recdv.   " min_hr - max_hr
         wa_final-t_max_min_lit = wa_data-recdv. " min_lit - max_lit.
so how can I put the logic to the value please correct my program.seeing my program can anyone give some idea ?
REPORT Z_FUEL_MONTHLY_QTY LINE-SIZE 260 LINE-COUNT 75
         NO STANDARD PAGE HEADING.
TABLES : equi,
         equz,
         imptt,
         imrg,
         eqkt,
         iloa.
Type Declaration
*DATA: BEGIN OF ty_equi occurs 0,
     equnr type equi-equnr,
     END OF ty_equi.
*DATA: BEGIN of ty_eqkt occurs 0,
     equnr type eqkt-equnr,
     eqktx type eqkt-eqktx,
     END OF ty_eqkt.
*DATA: BEGIN of ty_iloa occurs 0,
     iloan type iloa-iloan,
     eqfnr type iloa-eqfnr,
     END OF ty_iloa.
*DATA: BEGIN of ty_imptt occurs 0,
     mpobj type imptt-mpobj,
     END of ty_imptt.
*DATA: BEGIN of ty_imrg occurs 0,
     idate type imrg-idate,
     recdv type imrg-recdv,
     recdu type imrg-recdu,
     END of ty_imrg.
TYPES: BEGIN OF ty_data ,
         equnr      type equnr,         " Euipment no
         eqktx      type eqkt-eqktx,    " Equipment Text
         eqfnr       type iloa-eqfnr,     " Equipment Sort field
         idate      type imrg-idate,    " Measuring Date
         recdu      type imrg-recdu,    " Unit of measuring ='KM','L','H'
         recdv      type imrg-recdv,    " Counter reading data
       END OF ty_data.
TYPES: BEGIN OF ty_final,
         equnr           type equnr,            " Equipment no
         eqktx           type eqkt-eqktx,       " Equipment Text
         eqfnr           type iloa-eqfnr,       " Equipment Sort field
         min_date        type imrg-idate,       " Min Date
         min_km          type p decimals 2,     " Max Km
         max_km          type p decimals 2,     " Min km
         t_max_min_km    type i,                " Total min_km-max_km
         max_date        type imrg-idate,       " Max Date
         min_hr          type imrg-recdv,       " Max hr
         max_hr          type imrg-recdv,       " Min hr
         t_max_min_hr    type i,                " Total min_hr-max_hr
         min_lit         type imrg-recdv,       " Max lit
         max_lit         type imrg-recdv,       " Min lit
         t_max_min_lit   type i,                " Total min_lit-max_lit
         fuel_con        type p decimals 2,     " Total_hrs / t_max_min_hr
         km_l            type p decimals 2,     " km / L
         lit_per_hr      type i           ,     " fuel comsumed / t_max_min_hr
       END OF ty_final.
DATA: i_data TYPE TABLE OF ty_data, " internal table
wa_data TYPE ty_data, " work area
i_final TYPE TABLE OF ty_final, " internal table
wa_final TYPE ty_final. " work area
DATA : max_date type date ,
         min_date type date,
         max_km TYPE p DECIMALS 2,
         min_km TYPE p DECIMALS 2,
         max_hr TYPE p DECIMALS 2,
         min_hr TYPE p DECIMALS 2,
         max_lit TYPE p DECIMALS 2,
         min_lit TYPE p DECIMALS 2,
         t_max_min_km TYPE p DECIMALS 2,
         t_max_min_hr TYPE p DECIMALS 2,
         t_max_min_lit TYPE p DECIMALS 2.
SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: p_equnr FOR equi-equnr, "no-extension no intervals,
                p_idate FOR imrg-idate. "NO-EXTENSION NO INTERVALS OBLIGATORY,
                "p_recdu FOR imrg-recdu NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk.
TOP-OF-PAGE.
FORMAT INTENSIFIED ON.
WRITE:/1(40) ' INVESTMENT LIMITED '.
WRITE:/50(40) ' FUEL CONSUMPTION REPORT ' CENTERED   ,
          2 'Page', sy-pagno.
FORMAT INTENSIFIED OFF.
WRITE:/50(40) '----
' CENTERED .
FORMAT INTENSIFIED ON.
WRITE:/2 sy-datum COLOR 3, sy-uzeit .
"WRITE:/1 S903-SPMON ."p_yearf.
ULINE.
"CENTERED.
write: /2 'Date From     :'.
write: /2 'Equipment No :'.
write: /2 'Unit          :'.
SKIP.
ULINE.
WRITE:/1 sy-vline,
    2   'EQUIP NO',              10 sy-vline,
    11 'NAME',                  40 sy-vline,
    41 'SORT',                  60 sy-vline,
    61 'MIN DATE',              74 sy-vline,
    75 'MAX DATE',              87 sy-vline,
    88 'MIN KM',                100 sy-vline,
    101 'MAX KM' ,              113 sy-vline,
    114 'TOTALK',                126 sy-vline,
    127 'MIN HR',               139 sy-vline,
    140 'MAX HR',                152 sy-vline,
    153 'TOTALH' ,               167 sy-vline,
    168 'MIN LIT',               180 sy-vline,
    181 'MAX LIT',               193 sy-vline,
    194 'TOTALL',                206 sy-vline,
    207 'FUEL CON',              219 sy-vline,
    220 'KM L',                  232 sy-vline,
    233 'LIT PER KM',            246 sy-vline.
FORMAT COLOR 3 ON.
ULINE.
END-OF-PAGE.
START-OF-SELECTION.
select a~equnr d~eqktx f~eqfnr e~idate e~recdu e~recdv
into table i_data
from equi AS a
inner join equz as b
on a~equnr = b~equnr
inner join iloa as f
on b~iloan = f~iloan
inner join imptt as c
on a~objnr = c~mpobj
inner join eqkt as d
on a~equnr = d~equnr
inner join imrg as e
on e~point = c~point
where a~equnr in p_equnr
and
e~idate in p_idate.
loop at i_data into wa_data.
CLEAR: wa_final.
READ TABLE i_final into wa_final
           with key equnr = wa_data-equnr.
    if sy-subrc EQ 0.
      PERFORM prepare_final_rec USING'M'. " Modify Existing Record
     ElSE.
      PERFORM prepare_final_rec USING'A'. " Append New Record.
    ENDIF.
    ENDLOOP.
    LOOP AT i_final into wa_final.
    WRITE:/1 sy-vline,
2 wa_final-equnr                                                 , 10 sy-vline,
11 wa_final-eqktx                                                 , 40 sy-vline,
41 wa_final-eqfnr                                                 , 60 sy-vline,
61 wa_final-min_date                                              , 74 sy-vline,
75 wa_final-max_date                                              , 87 sy-vline,
88 wa_final-min_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED           , 100 sy-vline,
101 wa_final-max_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 113 sy-vline,
114 wa_final-t_max_min_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED    , 126 sy-vline,
127 wa_final-min_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 139 sy-vline,
140 wa_final-max_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 152 sy-vline,
153 wa_final-t_max_min_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED   , 167 sy-vline,
168 wa_final-min_lit EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED         , 180 sy-vline,
181 wa_final-max_lit EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED         , 193 sy-vline,
194 wa_final-t_max_min_lit EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED   , 206 sy-vline,
207 wa_final-fuel_con EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED        , 219 sy-vline,
220 wa_final-km_l EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED            , 232 sy-vline,
233 wa_final-lit_per_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED      , 246 sy-vline.
ULINE.
endloop.
FORM prepare_final_rec USING    p_mode TYPE char1.
SORT i_data BY equnr idate descending .
        if wa_data-recdu = 'KM'.
        max_km = wa_data-recdv.
        min_km = wa_data-recdv.
        endif.
        if wa_data-recdu ='H'.
        max_hr = wa_data-recdv.
        min_hr = wa_data-recdv.
        endif.
        if wa_data-recdu ='L'.
        max_lit = wa_data-recdv.
        min_lit = wa_data-recdv.
       endif.
   at new equnr.
       read table i_final into wa_final index sy-tabix.
       write:/ wa_final-equnr, wa_final-eqktx ,wa_final-eqfnr ,wa_final-idate ,
       'Min KM',min_km EXPONENT 0 DECIMALS 2 color 7 ,
        'Min H',min_hr EXPONENT 0 DECIMALS 2 color 7 ,
         'Min L',min_lit EXPONENT 0 DECIMALS 2 color 7.
   endat.
*at end of equnr.
       read table i_data into wa_data index sy-tabix.
       write:/ wa_final-equnr, wa_final-eqktx ,wa_final-eqfnr ,wa_final-idate ,
       'Max KM', max_km EXPONENT 0 DECIMALS 2 color 7,
       'Max H', max_hr EXPONENT 0 DECIMALS 2 color 7,
       'Max L', max_lit EXPONENT 0 DECIMALS 2 color 7.
*endat.
         wa_final-max_date = wa_data-idate.
         wa_final-min_date = wa_data-idate.
         wa_final-max_km = wa_data-recdv.
         wa_final-min_km = wa_data-recdv.
         wa_final-max_hR   = wa_data-recdv.
         wa_final-min_hR   = wa_data-recdv.
         wa_final-max_lit = wa_data-recdv.
         wa_final-min_lit = wa_data-recdv.
         wa_final-t_max_min_km   = wa_data-recdv. " min_km - max_km
         wa_final-t_max_min_hr = wa_data-recdv.   " min_hr - max_hr
         wa_final-t_max_min_lit = wa_data-recdv. " min_lit - max_lit.
IF p_mode = 'A'.
    wa_final-equnr = wa_data-equnr.
    wa_final-eqktx = wa_data-eqktx.
    wa_final-eqfnr = wa_data-eqfnr.
    APPEND wa_final TO i_final.
ELSE.
    MODIFY i_final FROM wa_final
      TRANSPORTING
          max_date
          min_date
          max_km
          min_km
          max_hr
          min_hr
          max_lit
          min_lit
          t_max_min_km
          t_max_min_hr
          where equnr = wa_data-equnr.
ENDIF.
ENDFORM.                    " PREPARE_FINAL_REC
regards;

Hi
Thanks , where to use the loop and endloop.
I want individual data to go into wa_final but confused how to start to get
min date..max..date..minkm_value..maxkm_value...total min-max,
min_hr,max_hr,total diff , min_lit,max_lit, total as in the program but how the data will go according to the values in wa_final
regards
Piroz

How to Create a Rich Dynamic Input and Output PDF to insert and get data into, from Database (MSSQL)

HI ,
I want to use Adobe LiveCycle Designer and Adobe LiveCycle Workbench features to create a Dynamic PDF form which can allow me to store data into database(MSSQL Server) and Can also provide me the Output PDF form with all the information which has been been filled in by the User in input form. Both Input and Output forms must be Dynamic. I am stuck in this process and Need Experts Advice on the Complete optimal process flow of the Adobe.
Regards
Ritesh Grover

HI
Go to the lay out of your screen and doublr click on the table control fields, you can get the Properties/Attribute of the screen or table control Fields
Assing a Group GRP1 for all the fields i n the table control.
in PBO
if ok_code = 'INPUT'.
LOOP AT SCREEN.
IF screen-grp1 = 'GRP1'.
screen-input = 1.
modify screen.
endif.
ENDLOOP.
elseif ok_code = 'OUTPUT'.
LOOP AT SCREEN.
if screen-grp1 = 'GRP1'.
screen-input = 0.
modify screen.
endif.
endloop.
endif.
Regards
Ramchander Rao.K
Edited by: Ramchander Krishnamraju on Aug 8, 2009 5:27 AM

Problem in getting data into database with standard direct input program

HI All,
I am having problem which is not updating the records in MM01 or MM02 with standard direct input program. i have data in internal table. from that table i am trying to upload into database by using background job MRP_MATERIAL_MASTER_DATA_LOAD.
when i execute my program it is showing message job is started. then i go into sm37 and seethe job status by executing. there also i am seeing job completed succesfully.
but if i go to mm03 and find the materials are updated or created there i couldn't find the material numbers which are from internal table.
So if ny one help me it wil be great.
Thanks in Advance
Venkat N

Hi Anil,
Thanks for your answer, but i am facing problem is i have material no and denominator and Actual UOM and nominator field values in the flat file.....
by using RMDATIND direct input program with MRP_MATERIAL_UPLOAD as job name for background job while uploading data into database.
here i am not getting data in to database, but when i execute the job in sm37 it is showing that message job processing successfully completed...this is my status..
if u can help me in this it will be gr8ful..
Thanks,
Venkat N

How to include applet jars into an JSF application

Hey guys,
I have a rather simple question. I have made a JAR that contains an applet. The applet runs fine, but when I include the applet into a JSF / JSP page I get a Class not found error.. The JAR containing the applet is included in the websites build path.
Can someone give me a hint where the JAR shoud go? Maybe a link to a tut would be nice

classpath wasnt set correctly

Getting Data INTO XML

I'm trying to create a class to build an XML file from data that I'm setting inside the class. I'm using a ContentHandler to put the data into a SAXParser. Now I need to use a transformer to put the data into XML. My problem is, it's calling for an InputSource as a SAXSource and I'm not sure how to get the data from the ContentHandler to an InputSource. Can anyone help me with this? I've tried the tutorial and it wasn't much help.
Linda Shaffer

You are sending a stream of SAX events to your ContentHandler? By which I mean, you are calling its startElement() method and so on? If so, then here's some code that I use to transform that virtual XML via XSLT:TransformerHandler handler = // a TransformerHandler using that XSLT
handler.setResult(new StreamResult(whereverYourOutputGoes));
SAXParserFactory spf = SAXParserFactory.newInstance();
XMLReader reader = spf.newSAXParser().getXMLReader();
reader.setContentHandler(handler);
reader.setProperty("http://xml.org/sax/properties/lexical-handler", handler);
reader.setFeature("http://xml.org/sax/features/namespaces", true);
reader.setFeature("http://xml.org/sax/features/namespace-prefixes", false);That's all. The TransformerHandler object is the one on which you should be calling startDocument() and so on; as soon as you call endDocument(), the transformation and output will take place.
If you aren't transforming, just outputting, then use an identity TransformerHandler.

Getting data into a standard eBS form from a custom form

To automatically enter (existing) customer information into a standard eBS form, we've created a custom query forms. This form queries for a customer and places the customer information into some global variables. This works fine.
Now, this query forms gets called using the zoom button of eBS.
First, the custom form got called with call_form. This worked, but after returning from the queryform, the toolbar was not as it was (missing some extra buttons, ect).
We fixed this issue by using (as stated in the developer guide) fnd_function.execute. This restored the correct toolbar, but no data gets returned into the eBS form. With some testing, it seems our custom code in the custom.pll stops working after the call to fnd_function.execute. When I diagnose the global values, they contain the right information. Can somebody suggest a way to let our custom code continue with processing after a call to fnd_function.execute?

Is there somebody with some insights into this problem?

How to Get data into I_ table which is Created dynamically

Hi Guys ,
I created one dynamic internal table , now I am want to display same internal table in my ALV? , how can I populate data into this internal table from my internal table based on some condition.
My Requirement is?
I have to display like this
1.This is my heading (field_cat of my ALV in which pack size may varry based on the flavor).
Plant flavor pack_size1----
pack_size-n
2. I have internal table( itab2) with all the pack-sizes and plant details.
3. how can I pass the these data into (itab1) which going to display in ALV ?
I can loop at itab2.
How to pass this data into itab1 relevent fields ?
Looking for Val. Inputs
With Best Regards
Prabhu
TC-Team SAP
Pepsi India
[email protected]

Hi,
This is a code snippet.
    DATA: r_dyn_table      TYPE REF TO data,
          r_wa_dyn_table   TYPE REF TO data,
          l_fields_table type SOI_FIELDS_TABLE.
    FIELD-SYMBOLS: <t_dyn_table>    TYPE STANDARD TABLE,
                   <wa_dyn_table>   TYPE ANY,
                   <w_field1>        TYPE ANY,
                   <w_field2>        TYPE ANY.
    DATA: l_oref_structure TYPE REF TO cl_abap_structdescr,
          l_abap_compdescr type abap_compdescr.
    data: check1 type i,
          check2 type i,
          l_range(20).
    r_dyn_table = IL_DYNDATA-r_dyn_table.
    ASSIGN r_dyn_table->* TO <t_dyn_table>.
    CREATE DATA r_wa_dyn_table LIKE LINE OF <t_dyn_table>.
    ASSIGN r_wa_dyn_table->* TO <wa_dyn_table>.
    l_oref_structure ?= cl_abap_typedescr=>describe_by_data(
                         wa_supl ).
    loop at il_fill_itab into wa_supl.
      loop at l_oref_structure->COMPONENTS into l_abap_compdescr.
        ASSIGN COMPONENT l_abap_compdescr-name
               OF STRUCTURE wa_supl TO <w_field1>.
        check1 = sy-subrc.
        ASSIGN COMPONENT l_abap_compdescr-name
               OF STRUCTURE <wa_dyn_table> TO <w_field2>.
        check2 = sy-subrc.
        if check1 = 0 and check2 = 0.
          <w_field2> = <w_field1>.
        endif.
      endloop.
      APPEND <wa_dyn_table> TO <t_dyn_table>.
    endloop.
You can access your dynamic internal table via a field symbol.
Svetlin

Regarding Upload of data into SAP from Application server using DATA SETS

Hi all,
I have a problem when uploading data that is application server [.txt file] into SAP using OPEN DATA SET,READ DATA SET & CLOSE DATA SET it is now going to dump. The file is actually splits the fields by using Tab Delimiter.
During uploading some junk values are coming with '#' so it going to dump and giving follow type of error.
Runtime Errors         CONVT_NO_NUMBER
Exception              CX_SY_CONVERSION_NO_NUMBER
Unable to interpret "#0#0#0#0#0#0#0#" as a number.
Can any one solve the above issue as i need it urgently.
Thanks in advance.
Thanks & Regards,
Rayeezuddin.

Hi Hielman,
Thnaks for that reply and for effort you are putting to solve my issue.
I had done the same thing what u have posted prior to your reply but still i am getting dump.
FORM f_get_legacy_data .
DATA: l_tab type xstring,
        l_tab1(1) type c,
        s type x.
move '23' to l_tab.
move l_tab to l_tab1.
OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
   MESSAGE text-207 TYPE c_e.
ELSE.
DO.
    CLEAR wa_input1.
   READ DATASET v_pfile INTO wa_input1.
    READ DATASET v_pfile INTO wa_read.
    IF sy-subrc EQ 0.
      move wa_read to i_txt-txt.
      append i_txt.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
s = '09'.
loop at i_txt.
   move i_txt-txt+10(1) to l_tab1.
   move '#' to l_tab1.
   split i_txt-txt at s into wa_input1-vbeln wa_input1-posnr
    split i_txt-txt at '#' into wa_input1-vbeln wa_input1-posnr
                                   wa_input1-per0bal wa_input1-per1val
                                   wa_input1-per2val wa_input1-per3val
                                   wa_input1-per4val wa_input1-per5val
                                   wa_input1-per6val wa_input1-per7val
                                   wa_input1-per8val wa_input1-per9val
                                   wa_input1-per10val wa_input1-per11val
                                   wa_input1-per12val.
    APPEND wa_input1 TO i_input1.
    CLEAR wa_input1.
endloop.
ENDIF.
CLOSE DATASET v_pfile.
IF i_input1[] IS INITIAL.
If there is no data in the legacy file or if the structure of the
legacy data does not match with that of internal table error message
need to be displayed.
    MESSAGE text-211 TYPE c_e.
*&--begin of change--
ELSE.
    CLEAR: wa_input, wa_input1.
    LOOP AT i_input1 INTO wa_input1.
     MOVE wa_input1 TO wa_input.
      MOVE: wa_input1-vbeln TO wa_input-vbeln,
            wa_input1-posnr TO wa_input-posnr,
            wa_input1-per0bal TO wa_input-per0bal,
            wa_input1-per1val TO wa_input-per1val,
            wa_input1-per2val TO wa_input-per2val,
            wa_input1-per3val TO wa_input-per3val,
            wa_input1-per4val TO wa_input-per4val,
            wa_input1-per5val TO wa_input-per5val,
            wa_input1-per6val TO wa_input-per6val,
            wa_input1-per7val TO wa_input-per7val,
            wa_input1-per8val TO wa_input-per8val,
            wa_input1-per9val TO wa_input-per9val,
            wa_input1-per10val TO wa_input-per10val,
            wa_input1-per11val TO wa_input-per11val,
            wa_input1-per12val TO wa_input-per12val.
      APPEND wa_input TO i_input.
      CLEAR: wa_input, wa_input1.
    ENDLOOP.
ENDIF.
ENDFORM.                    " GET_LEGACY_DATA
When i am giving input as
Directory /pw/data/erp/D5S/fi/up
Name: Backlog1616_D1S.txt
BKCOPO1           BKSOI1        1000.00                100.00                 -200.00                0                      0                      0                      0                      0                      0                      0
BKSOPO2           BKSOI2        2222.22                0                      300                    0                      0                      0                      0                      0                      0                      0
BKSOPO3           BKSOI3        -3000                  400                    0                      0                      0                      0                      0                      0                      0                      0
BKSOPO4                         4000.55                500                    600                    0                      0                      0                      0                      0                      0                      0
0040000000        000010        -100                   -110                   -110                   0                      0                      -600                   0                      0                      0                      0
0040000001        000010        -110                   -110                   0                      0                      0                      -610                   0                      0                      0                      0
I am getting i_input internal table populated as follows at the end of that subroutine.
After appending [APPEND wa_input TO i_input].
BKCOPO1#BK|000000|            0.00 |            0.00 |            0.00    |
BKSOPO2#BK|000000|            0.00 |            0.00 |            0.00    |
BKCOPO3#BK|000000|            0.00 |            0.00 |            0.00    |
BKCOPO4##4|000000|            0.00 |            0.00 |            0.00    |
0040000000|000000|            0.00 |            0.00 |            0.00    |
0040000001|000000|            0.00 |            0.00 |            0.00    |
And output is showing erronious records: 6
No entries inserted.
Can you solve this issue.

Getting data into a JSF application by posting it via http

Similar Messages

Maybe you are looking for