Getting DB Link Info in a Remote procedure

Suppose User A of Database A
invokes a plsql procedure in Database B through a DB Link.
In this scenario ( Remote procedure call ) is it possible to get the name of the user and the database which invoked the plsql procedure , within the plsql procedure itself ?
Basically, I am looking for a way to get the Invocation context in case of a remote procedure call.

Not only can we not do this remotely, we can't even do it locally. At least not without some pfaffing around. You could look at using DBMS_APPLICATION_INFO remotely to set and get such information.
Cheers, APC

Similar Messages

Calling a remote procedure with db link - SQL Plus hangs

I am trying to call a procedure from a remote database with a db link, within a local procedure. The purpose of the calling the procedure is to get the server time from that database. When I try to compile this procedure on the local database SQL Plus hangs without giving any error message, I have to close SQL Plus. Below are my two procedures:
Local procedure:
CREATE OR REPLACE PROCEDURE get_server_time(p_remotetime IN OUT VARCHAR2)
IS
/*Grabs the system time from remote database .
l_remotetime varchar2(16) ;
BEGIN
get_remote_time(l_remotetime);
p_remotetime := l_remotetime;
END ;
Remote procedure:
CREATE OR REPLACE PROCEDURE get_remote_time(p_remotetime in out VARCHAR2)
IS
/* Grabs the system time from remote database and returns it to the
calling proc.
l_remotetime varchar2(16) ;
BEGIN
SELECT to_char(sysdate,'YYYYMMDDHH24MISS')
INTO l_remotetime
FROM dual ;
p_remotetime := l_remotetime ;
END ;
I personaly do not see anything unusall with the two procedures, but cant figure out what is making SQL*Plus hang.
Any help would be much appreciated.
Thanks In Advance

Hello
Are you able to run the procedure connected to the livetolocal database directly? It looks as if you either have a missing table or the permisions for the user associated with the database link are not sufficient.
As for calling the procedure, it would probably be more managable if you created a public synonym for it to hide the actual location. That way if you want to change the name of the DB link, or where it points to, no-one has to change their code, you just have to change the synonym.
HTH
David

Cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?

cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?

What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support

How to Execute a Remote Procedure in Portal using Database Link

Hi,
I followed the instructions to create a Portal form for a remote procedure. But I am encountering the following error. Can someone advise what may be the cause?
Failed to execute - Missing string(create_package_body) language(us) domain (wwv) sub_domain (wwv_builder) (WWV-04300)
ORA-04020: deadlock detected while trying to lock object PUBLIC.PORTLET_SCHEMA (WWV-11230)
Failed to parse as PORTAL - (WWV-08300)
PURPOSE
How to execute a remote procedure in Portal using Database Link.
DESCRIPTION
This procedure assumes that you have two databases, one of which is remote, and Portal is configured in the other.
Remote Database A:
==================
1) Create a procedure as follows: Create or Replace PROCEDURE SCOTT.ADD_TWO_VALUES ( v_one IN NUMBER, v_two IN NUMBER, v_result OUT NUMBER) as begin v_result :=v_one+v_two; end; 2) Grant execute privileges to PUBLIC on the procedure.
Database B (where Portal is configured): ========================================
1) Create a public database link and choose to connect as a specific user (say SYSTEM). By default, in an Oracle 8i database, the "global_names" parameter in initSID.ora (or init.ora) file is set to "true". This Global Naming parameter enforces that a dblink has the same name as the database it connects to. Therefore, if the remote global database (A) name is "ora8.acme.com" then the database link should also be named as "ora8.acme.com".
2) Create a synonym for the procedure in Database A. Make sure you fully qualify the procedure name in the remote database (like SCOTT.ADD_TWO_VALUES).
3) Create a dynamic page to execute the procedure. The ORACLE tags in the dynamic page will look similar to the following: <ORACLE> DECLARE v_total NUMBER; BEGIN ADD_TWO_VALUES(:v_one,:v_two, v_total); htp.p('The total is => '); htp.p('<input type="TEXT" VALUE='||v_total||'>'); htp.para; htp.anchor('http://<machine.domain:port#>/pls/portal30/SCOTT.DYN_ADD_TWO_VALUES.show_parms', 'Re-Execute Procedure'); END; </ORACLE>
4) Portal does not have an option to create a form based on a synonym. Therefore, if you want to create a form instead of a dynamic page, create a wrapper procedure and then create a form based on this procedure. For example: Create or Replace PROCEDURE PORTAL30.ADD_TWO_VALUES_PR ( v_one IN NUMBER, v_two IN NUMBER, v_total OUT NUMBER) as begin add_two_values(v_one, v_two, v_total); end;
5) Grant execute privileges to PUBLIC on the procedure.

hello...
any input will welcomed... Thanks..

Turning on my computer I get an error message saying that the procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

Turning on my computer I get an error message saying that the procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? What do I need to do?

Hi Hans - I'll do my best
First I assume you are logged in as adminstrator on the computer you are using. You mention only seeing Mojo Pac in your Program Files, but there would be far more programs listed there. There are several ways you can find your Apple Application Support file folder.
For Windows XP - How to Search for a File or Folder
To search for a file or folder:
Click Start, and then click Search.
In the Search Companion dialog box, click All files and folders.
Type part or all of the name of the file or folder, or type a word or phrase that is in the file.
So in your case it would be Apple Application Support.
If it doesn't show, you will need to make sure that you have enabled the search for hidden files or folders.
To search for hidden or system files in Windows XP:
Click Start, click Search, click All files and folders, and then click More advanced options.
Click to select the Search system folders and Search hidden files and folders check boxes.
Then search again for the Apple Application Support folder.
I'm assuming that you will locate it. Once you have done so - click on it to open it in Windows Explorer.
Then you should locate libxml2.dll - right click on it and select (left click) Copy
On the left side of the window, under Apple Application Support folder, you should see Mobile Device Support - Right Click on it - Select (Left Click) on Paste.
Start your iTunes programme.
Good Luck and let me know how you get on.

Opera is trying to get my contact info and whenever I click on the link

Slightly off topic but very concerning. Opera is trying to get my contact info and whenever I click on the link to this thread in my email, it pops up. This is the first time this ever happened. Oh yea, I don't have Opera installed on my computer. What the.......?

take everything off line, any clone or backups incl TimeMachine and rebuild the launchd services for one thing.
for another, and whether it is or isn't malware, is to have a clean system from day #1 you can restore or use.
Or just follow the guides on how to setup and do a clean ML OS install. Download, burn to flash memory and setup ML on a drive. And put that system on a sparse disk image and put it somewhere, and so you can also use it to restore the system if ever needed.
Using Cloning as a Backup Strategy
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.bombich.com/software/updates/ccc-3.5.html
OS X Lion Install to Different Drive
How to create an OS X Lion installation disc MacFixIt
Migration Assistant Update for Mac OS X Snow Leopard
http://www.apple.com/support/lion/installrecovery/
Create an OS X Lion Install disc
http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
http://www.coolestguyplanettech.com/how-to-make-a-bootable-osx-10-8-mountain-lio n-disc-or-drive-from-the-downloaded-mountain-lion-app/
It is pretty hard to get malware onto a Mac.

Remote procedures created on Private Database Links

How to grant access to role on the private synonym created in a schema for the remote procedure with private Database links.
We have converted the public database links to private. Plz suggest me how to access the remote procedures and
grant access to role.
Thanks a Lot in advance.
Its Urgent

I asked in general since my task was stopped because of this.
Secondly i have asked the users not specifically you. If you dont want to answer just dont answer.
Coming to the problem, There was no problem when the public database links were used. The public synonyms were created and we were able to grant access with the role.
But why not with private dblinks.

Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.

I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.

Inserting data in remote database with remote procedure

Hi,
I have a problem concerning inserting data in a remote database (10g) by using a remote procedure.
I call the procedure from a 11g database just by doing:
begin
getlocalfilecontent@remoteserv(param)
commit;
end;
And it wouldn't insert the data into the remote table.
While when I execute the same procedure locally on that remote database (10g)
It does insert the data I want.
What could be causing the problem here, am I overseeing something?
Edited by: user7634309 on 14-Aug-2009 02:14

Already thanks for the fast replies
The dblink works perfectly. I can select data etc with this dblink.
The procedure on the remote database is the same.
One other thing, when I execute the remote procedure on local database 2nd time I get the
ORA-ERR: ORA-02041: client database did not begin a transaction.
This could be fixed by doing a commit or rollback but still no inserting in remote table.
So to sum it up:
What doesn't work:(no inserting)
On 11g server that calls remotely the procedure
begin
getlocalfilecontent@remoteserv(parameter);
commit;
end;
What works(does insert)
On 10g server calling the procedure locally
begin
getlocalfilecontent(param);
commit;
end;
So everything is the same except on the 11g server I add the dblink spec behiind the procedurecall

Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi - [.....] - RTBUIP_Build_Invoke.vi.ProxyCaller

Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
Olaf

Hello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany

Downloaded 3.6 version of firefox and it changed my favorites, quicken, other files back to 1.5 yrs ago. How do I get back the info it has erased or hidden from me???

Question
Today downloaded 3.6 version of firefox and it changed my favorites, quicken, other files back to 1.5 yrs ago. How do I get back the info it has erased or hidden from me???

What do you mean by '''''"changed my favorites, quicken, other files back to 1.5 yrs ago"'''''? More detail please.
 
You have an item installed that is considered malware/spyware/adware. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Ask Toolbar Plugin Stub for 32-bit Windows
Unfortunately, it is becoming more and more common for these kinds of "extras" (toolbars, security scanners, etc.) to be added to your browser/system/desktop when adding or updating other software, some from very well-know software vendors. You must carefully read information before downloading any "free" software and be very alert during the install process for any opportunity to opt-out of "extras" being installed.
'''If you have the Ask Toolbar''' 
* First try to disable or uninstall the Ask Toolbar in Firefox via "Tools -> Add-ons -> Extensions". See: [[Uninstalling add-ons]] 
*In some cases, you may need to uninstall the Ask Toolbar using Windows Control Panel .
**See [http://support.mozilla.com/en-US/kb/Cannot+uninstall+an+add-on#Uninstall_from_Windows_Control_Panel Cannot uninstall an add-on - Uninstall from Windows Add/Remove Programs].
'''You '''MAY''' need to reset your homepage''' if an Ask search page opens when first starting Firefox. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
'''You ''MAY'' need to reset a preference''' if searches from the URL/location bar take you to an Ask search page. 
To reset the preference related to Ask search from the URL/location bar via about:config, specifically the keyword.URL preference - 
*Open a new tab or window.
*Type '''''about:config''''' in the URL/address bar and press the Enter key
*If you see a warning, accept it (promise to be careful)
*Filter = keyword.url
*Right-click on the preference below the Filter, and choose Reset
*Restart Firefox (File > Restart Firefox)
*See: http://kb.mozillazine.org/Keyword.URL for details.
Also see: 
* http://kb.mozillazine.org/Problematic_extensions#Ask_Toolbar
* http://kb.mozillazine.org/Uninstalling_toolbars
 
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
*Adobe PDF Plug-In For Firefox and Netscape "9.3.3"
**New Adobe Reader X (version 10) with Protected Mode just released 2010-11-19
**See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.1 r82
*Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
**4 updates behind
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''. Note separate links for:
#**Plugin for Firefox and most other browsers
#**ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
#*Also see "Manual Update" in this article: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Java2 SDK SEv1.4.1_01-Win Install Failure - remote procedure call

Whenever I try to install the J2 SDK 1.4.1 on Windows XP Pro, everything works til the actual install is supposed to start. It just hangs there. When I hit the Cancel button, nothing happens; so I have to use task manager to cancel it. Afterward a small window with a message saying "An error occurred while launching the setup. The remote procedure call failed". I found a similar posting last spring for XP & J2 SDK 1.4.0, but there was no resolution posted. Does anybody know what the problem is?

I would be very interested in a solution for this problem as well. I get father. The installer runs all the way through until it is done (100%). But it does not complete and hangs. If I cancel install the error dialog with the following message. "An error occurred while launching the setup. The remote procedure call failed." appears. This is also an Windows XP Pro machine.

Remote procedure call failed and did not execute response after changing contents

Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.

Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen

Remote Procedure Call Failed - Verifying Account prior to establishing PIN as sign in option

PC Settings / Accounts / Sign in options / PIN / Verify Account info / : I enter my Microsoft Account password and receive the following message:
"Remote procedure call failed"
Cannot cancel - screen keeps reappearing.
I have successfully established a sign-in PIN for my Win 8.1 desktop. The above problem is occurring only on my Win 8.1 laptop.

Hi,
Sorry for my late reply.
Regarding the issue, please ensure that RPC service is start.
If it stops, I suggest you perform the following step to start it.
1.Press Win+R, and type regedit, then press enter.
2.Please navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RpcSs and
locate Start registry key
Double click on Start and edit the value:
Change Startup type :
Automatic - 2
Manual - 3
Disabled - 4
Automatic (Delayed Start) - 2
Note: When you change to Automatic (Delayed Start) a new key DelayedAutostart is created with value 1.
When you change to Automatic from Automatic (Delayed Start), DelayedAutostart change value to 0.
If it cannot start, please refer to the following article to test it.
"Could not start the Remote Procedure Call (RPC) Service. Error 1058" error message when you manually start the Remote Procedure Call service
http://support.microsoft.com/kb/838428
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16000
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
 <EventID>16000</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8000000000000000</Keywords>
 <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
 <EventRecordID>58</EventRecordID>
 <Correlation />
 <Execution ProcessID="2488" ThreadID="8704" />
 <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
 <Computer>Charles-PC.CHARLESPOOL.local</Computer>
 <Security UserID="S-1-5-18" />
</System>
<UserData>
 <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
 <ErrorMessage>%%2147944126</ErrorMessage>
 <ErrorCode>0x800706BE</ErrorCode>
 </VmlEventLog>
</UserData>
</Event>
Log Name: Microsoft-Windows-Hyper-V-VMMS-Admin
Source: Microsoft-Windows-Hyper-V-VMMS
Date: 1/10/2014 10:48:46 AM
Event ID: 16010
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
 <EventID>16010</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8000000000000000</Keywords>
 <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
 <EventRecordID>59</EventRecordID>
 <Correlation />
 <Execution ProcessID="2488" ThreadID="8704" />
 <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
 <Computer>Charles-PC.CHARLESPOOL.local</Computer>
 <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
 <ErrorCode>15005</ErrorCode>
 <DataItemName>Parameter0</DataItemName>
 <EventPayload>
 </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Getting DB Link Info in a Remote procedure

Similar Messages

Maybe you are looking for