Getting "device not compatible" message on Galaxy s Tab

Cant download the app without gettin the error message. Is there a fix for this or somthing I can do. 

Hi,
I suppose you are using the Samsung Galaxy Tab.
Normally if you can install it over the Market Web interface it should be compatible - you shouldn't even be able to see it in the Market app unless you are compatible.
Do you get the error from the Market application or when trying to start the application - i.e. does the application exist on your device?
It would also be good to know the exact model number as well as language you're using and what country your in.
What you could try out would be to clear the Market cache and then retry the install.
Thanks,
Ignacio

Similar Messages

  • Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

    Does anyone know how to update OSX Mountain Lion 10.8.1. to 10.8.2. on a late 2012 Mac mini. All I get are 'not compatible' messages even using supplementary updates etc?

    It appears that many of the problems with the HDMI are the "monitors" that are being used. Samsung and Vizeo both DO NOT support a computer input on HDMI only VGA. There probably are others, manuals must be read to confirm compatability.
    I strongly believe that the reason the 10.8.2 update was pulled is due to the fact (it happened to me) that the new Disk Utility creates a Fusion drive if aftermarket SSDs are added to the system. I think Apple wants this propriatary Fusion Drive to be something you buy from them not a "homebrew" for lots less money.

  • Updated iphone4 to ios5 - get Device not supported for icloud - worked fine for other iphone4

    Updated iphone4 to ios5 - get "Device Not Supported" message - worked fine for other iphone4 & ipad.  Why is this iphone "not qualified for icloud"?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • I keep getting "Device not properly ejected" message and no device is being used.  Help?

    I keep getting "Device not properlt ejecte" message and no device is being used. Help?

    Hello,
    No external Drives, camera cards, or CDs/DVDs in use? Any Network Volumes mounted?

  • I have iPad 2. Just bought Panasonic AF200. I have adapter to upload pictures. My iPad says device not compatible. Any suggestion to get it working

    I have iPad 2. Just bought Panasonic AF200. I have adapter to upload pictures. My iPad says device not compatible. Any suggestion to get it working

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • "USB Device Not Recognized" Message when connecting iPod Nano

    I get the following windows pop up when connecting my son's iPod Nano
    *"USB Device Not Recognized"*
    *One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
    I have successfully connected this device to this computer before so I don't know what has changed.
    Message was edited by: ipodnannouser

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • 2G Nano-USB Device Not Recognized message

    2G Nano has been sitting for months. Decided to use it as a backup. When connected to computer (tried on 4 different computers running iTunes) I get a "USB Device Not Recognized" message. It shows up in "Device Manager" as an "Unknown USB Device" not an "iPod". Have performed the required 5 Rs and it still will not work. Any help would be greatly appreciated!

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • USB Device Not Recognized Message

    Hi,
    I constantly get this message and it also says
    one of the USD devices attached to this computer has malfunctioned and Windows does not recognize it, For assistance in solving this problem, click this message.
    When I click on it,A box appears and is BLANK( It says the location of the device is shown in bold type).
    I went to system devices and uninstalled 5 USB devices and nothing changed except my computer reloaded them?
    I have a Satellite windows Vista.
    Also I can not start my computer at times and when I push F12. It try's to repair the problem and can't it gives me pretty much the same message.
    Can anyone help?? This darn message go off and on constantly..
    Any info/help appreciated, Valerie

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • Device not recognized message

    I keep getting a device not recognized message when I connect my iphone4s to any computer. How do I fix this?

    For a Windows PC try this http://support.apple.com/kb/TS1538

  • Nano 7th gen USB port broken - device not recognized message

    Ipod Nano received for Christmas. Worked fine. Plugged into charge. Tried it today and won't power up, when I plug into the PC, I get a message that the device not recognized. The port doesn't appear to be working. What do I do?

    This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
    When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
    Reset the iPod:
    1. Unplug the iPod.
    2. Turn the hold switch to HOLD and then back to off.
    3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
    4. Plug in the iPod. It should now be recognized.
    This worked fine for me the first time. Thanks! Jack

  • When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

    When I send a text message to a friends phone I get a Not Delivered message but I can receive his message

    Hello dgantz,
    The following article provides information and steps that can help get Messages working correctly.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Cheers,
    Allen

  • I recently started getting a "not delivered" message in imessages. Any suggestion what the problem might be?

    I recentlt started getting a "not delivered" message in imessage!  Any suggestions what may cause this?
    rtrruss

    kbomby2 wrote:
    Could also try a soft reset - Hold Power and Home down together for 10 seconds.
    If that's a 'soft' reset, then what's a 'hard' reset?

  • I keep getting a "not delivered" message when I try to send a picture through imessage

    Over the last week each time I sent a picture in iMessage it goes out then I get a "Not Delivered" message. The other person gets the picture even though it says not delivered.  I've shut iMessage off then back on, I've done a hard shutdown/restart.  I'm not sure what else to do.  Is anyone else having this issue and been able to resolve it?
    Thank you!

    How do you fix apple errors that come up when you try to open iTunes?

  • I get constant "Not Responding" messages and Thunderbird freezes. I've done everything suggested on this forum. Nothing helps.

    I've done everything I can find in this forum - using Safe mode, changing McAfee settings, etc., etc., etc. I downloaded Thunderbird again and reinstalled it. Nothing helps. I can look at one email but if I try to delete it I get the "Not responding" message. If I try to go to the next message I get the "not responding" message. If I try to do anything while the screen is frozen, it goes grey and I get the "not responding" message. Short of changing my email viewer, is there anyway I can fix it.

    I have this problem too and it is EXTREMELY frustrating!!!

  • Getting "file not compatible" error on my Samsung Galaxy

    Hi,
    I have just recently got the lastest version of Adobe Photoshop and when I try to install it on my samsung galaxy it just says that this file is not compatible, anyone got any ideas how to resolve this problem
    Skyler

    Hi,
    I suppose you are using the Samsung Galaxy Tab.
    Normally if you can install it over the Market Web interface it should be compatible - you shouldn't even be able to see it in the Market app unless you are compatible.
    Do you get the error from the Market application or when trying to start the application - i.e. does the application exist on your device?
    It would also be good to know the exact model number as well as language you're using and what country your in.
    What you could try out would be to clear the Market cache and then retry the install.
    Thanks,
    Ignacio

Maybe you are looking for