Getting double copies (copy and past) of cast names in IMDb, older browser didn't do this.

I have a personal movie database I designed myself. I have always been able to copy and paste the cast list from IMDb to my database until I "upgraded" my browser from v.17 to v.27. Now I get double copies of the cast names and descriptions of the characters jump down and extra line. This is a very big aggravation to me. When I want to work with my database I have to use an older browser. Is there anything in "about:config" that I can change to correct this? The same thing happens between IE8 and IE11. What gives?

Yes, I have tried 31. The tabs were stuck on top and not changeable. I consider the tabs as part of the web page but the address bar is NOT. It would be nice to keep good features rather than "upgrading" away from them. Seems too many programs are just in a version race with total dis-regards to the users.

Similar Messages

Getting rid of copied and pasted artwork

Yesterday my copy of the new Pearl Jam album arrived and included in the package was 2 free concerts to download, which I have done. All installed OK and I have managed to get them showing in my iTunes library.
Now, not being proper releases there was no iTunes artwork for the albums however PJ did release both shows as official bootlegs a few years ago so there is artwork out there which I found using Google images. I promptly copied and pasted the artwork into iTunes.
Only on one of them I mistakenly pasted the wrong artwork and now I can't get rid of it. "Clear downloaded album artwork" doesn't work. Now I have made this mistake many times with CD's I have copied and solved the problem by deleting the songs from the library and deleting the files altogether and re-copying but in this case I can't delete the files as I won't get them back again (being one-time free downloads). I have deleted the tracks from the iTunes library and re-added the files but the artwork re-appears again as if it has somehow welded itself to the files. Does anyone know how I can get rid of it so I can get the correct artwork on there?

Adware
1. Use free AdwareMedic to remove adware
    http://www.adwaremedic.com/index.php
   Install , open, and run it by clicking “Scan for Adware” button   to remove adware.
   Once done, quit AdwareMedic.
             or
   Remove the adware manually by following the “HowTo” from Apple.
   http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
    Turn those off and relaunch Safari.
    Turn those on one by one and test.
Malware
http://www.thesafemac.com/mmg/
Best.

Why does formatting get lost when copy and pasting slides between projects?

I'm beginning to copy and paste several slides from a project that was created in Captivate 6. I've opened the project in 7.0.1 and saved it. Next, I've copy and pasted about 20-30 slides from the old project into my new template. In the process, many slides have lost "bold" and "bullets". It's worth noting that many slides have remained correct. I also find myself having to reset slide templates and toggle off quiz buttons that I've already toggled off in old project.
This isn't part of the same problem, but related. When I copy slides from the new template I mentioned into the old one (in hopes that Advanced Actions would transfer correctly), I've noticed that none of the item names have transferred over with the copy and paste. Instead of seeing the button name I've created, it changes to "shape, text_caption, etc", the default.
I'm hoping the copy pasting between projects becomes more efficient, I'm finding myself burning unneccessary time doing more QA and microscopic investigation, although I suppose more QA isn't always a bad thing.
System is the following:
OSX 10.8.5
Captivate 7.0.1
Safari 6.0.5
Blood Type: oops, wrong forum.

When copy/pasting between different versions that has always been a problem, especially with question slides. There seem always to be changes that make such a transfer difficult. Did you try to open the CP6 project first in CP7 and see what worked? And do you use exactly the same theme (object styles, master slides, skin editor)?
Copy/paste slides, objects with advanced actions: bit same problem, works best if done between CP7 projects. The problem that each object needs to have a unique ID (name) is what causes the renaming to generic names.
Lilybiri

When I copy and paste a link, it does not show up as hypertext. This is a new problem. I recently switched ISP's. Could that be an issue?

All of a sudden, when I try to copy and paste a link, it does not paste as hypertext.
== After changing ISP

Looking for answers

Copy and paste photo to another album.hope apple will do something about this

Copying and paste photo to different album is such a long process you need to sync your photos from your computer to
Teh ipad.i have a samsung phone that runs with android and it much easier to do this kind of things.i love my ipad 2 but i hope apple will do something about
Issue on the photo albums. On the advertisment of ios 5 they are saying we are making this easier but yet powerful.

Under ios 5 you can easily copy photos from any existing slbum to a new album.. You just cannot ( or at least i cannot) put them into an existing album.

When using Yahoo Mail in Firefox, I can't copy and paste pictures from a third-party host. I can do this in MSIE 8.

I'm accustomed to copying pictures that I placed on a third-party host (Photobucket or Multiply) and pasting them into the body of a Yahoo Mail message. I can't do that on Firefox. When I click "Paste," nothing happens.

https://support.mozilla.com/en-US/kb/Clipboard+not+working

TS1292 Click on the link above or copy and paste the following address into your Web browser to view the article:

I want to retrieve On iTunes consisted

I don't know what you are asking, but judging by the page that you posted from then I assume that you are having problems with an iTunes gift card. If you are then was the card issued in the same country as your account is based ? They are only valid in their country of issue. If it was and the page that you posted from doesn't help then you will need to try contacting iTunes support (you will need to give them as much of the serial number and activation code from the card as you can read) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

To view the file, click the link or copy and paste the following URL into your web browser.

The file does not display. When I click on the link, I do see the file anme and a comment box. But not the file, which is a one page InDesign file.
This is the link...
http://adobe.ly/1ooe2uw
I have entered a comment and it does appear.

Where did you find this link?

Why did apple mail get much worse with lion osx? I can't add recipients without copy and paste?

why did apple mail get much worse with lion osx? I can't add recipients without copy and paste?

I went through updates on my three newest Macs this week. As I stated I'm talking about iTunes 10.5.1 (42). I am checking for updates now and I see 10.5.2 is now available. I'll know in about 15 minutes if this issue is fixed or not.
15 minutes later:
I must have updated this PPC G5 a day or two before iTunes 10.5.2 came out. I was able to update to 10.5.2 (11) and this copy/paste bug is fixed. I'm happy again.
Tracy

Cannot copy and paste or change font

I recently changed to a new PC and my Verizon email will not allow me to copy and paste or change the font size !!
Did not have this problem before. Why is that ??
Cannot find any settings or help info to change it.

gregadnil wrote:
I recently changed to a new PC and my Verizon email will not allow me to copy and paste or change the font size !!
Did not have this problem before. Why is that ??
Cannot find any settings or help info to change it.
What error are you getting? What is it your are trying to copy/paste? Is your email set to plain text for some reason?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

(CS4) Copy and paste video/sound into another project, sound won't export

Hello Adobe community
I am working on a TV show for a community television network in Australia. I created the opening credits in a seperate project to the edited footage of the show, because my computer is struggling with the size of all the files. So I have two project files. Recently I copied and pasted the edited footage of the show into the project where I have the opening credits (by highlighting all the footage, right clicking and going to copy, then opening the Project with the credits sequence, right clicking and selecting paste). This seems to work. I can hear the sound and continue tweaking and editing. However, when I export the project, the sound from the footage I have copied into the project can't be heard. I can hear the sound from the credit sequence, but not the sound that has been copied into the project (although on the timeline of the project, I can hear the sound... This problem only presents itself after export).
I have tried doing the opposite... Copying and pasting the opening credit sequence into the project with the edited footage, and I get the same problem. It doesn't seem to matter which file type I export as. I have tried .AVI and .MPEG2, with the same results.
I am using Windows 7 64bit version, and Premiere CS4. I have a mixture of .MTS, .WAV and .MP3 audio files in the footage that I copy and paste across. None of them are exporting.
I have tried moving the copied and pasted audio files on to the same audio tracks as the sound already in the project, but this doesn't work either. The original sound will export, then when it gets to the copied and pasted sound nothing can be heard.
I have included some screen shots to illustrate the problem below. If you have any questions please let me know.
Thanks for your time! I have a looming deadline so your help is much appreciated.
-Robert

Thanks for your replies everyone. Sounds like cut and paste is not an option. Wow, I didn't realise how much trouble I'd be causing for myself by having different parts of the show in different projects.
I am reluctant to export the project then import it into another project, because I do not want to lose quality through compression as Ann suggests.I don't know what you mean, Ann, when you say "Dont think CS4 could import single sequence (forgot)."? Jim, I'm also unsure what you mean when you say "That's what UT is for"?
However, I went to File/Import/Import Entire Project, and imported the project this way. Then I dragged the little folder icon that appeared in the top left hand corner of the screen onto the timeline. However, when I did this, a few problems occured. Firstly, the original project had footage and audio on many different tracks, but when I imported the project nearly all of the video and audio was on to the one track. Secondly, instead of going for 10 minutes, the imported footage went for a few hours. Thirdly, the sound and images were all out of sync. I have included two images to illustrate this problem:
Above is the original project. As you can see, I have audio and video on many different tracks, and lots of cuts.
This is what the project looked like after I had imported it into another project. Nearly everything is on one track, the footage goes for a few hours now (instead of 10 minutes) and the video and sound are all out of sink.
Then I tried File/Import/Import Selected Sequence. The only sequence I had the option of importing was Sequence 1. I did this, then dragged the folder icon onto the timeline, and I had a similar problem to before. Everything on one track, footage out of sync and going for a few hours.
Is there a way to import a project and maintain all of the editing (the cuts, the multiple tracks, etc.) as they are in the original? I have spent many hours editing both the footage and the opening credits, so I really don't want to lose all this work when I import one into the other. The good thing about copy and paste is that it maintains all of the original cuts and editing. Shame it is so unreliable.
Thanks heaps for all your help!
-Linus

(v 5.5) I can no longer copy and paste from one layer to another.

I can no longer copy and paste from one layer to another in Illustrator (5.5). This started happening a few days ago. Restarting Illustrator and also my computer (Mac) didn't help. Any ideas?

To clarify: If I select an object in layer 1 using command/c or command/x then select layer 2 and press command/v the object gets pasted back into layer 1 instead of layer 2. I've tried everything I can think of and can't correct the problem.
Now the only way I can get an object from one layer to another is to drag it into another layer in the layers window.

Can items from a list be copied and pasted into a new Pages Table?

In iWork Pages, I have a list of 50's & 60's recording artists and their songs, (which is about 40 pages long) from my '45 rpm record collection for my Jukebox.
Is there any way to copy and paste the artists' names, and their songs into a Pages Table, so that I can sort the artists' names into an alphabetical list?
If there is a way, it would save me a ton of work of typing each name into a Table one at a time.
Thank you,
Jim

Recently, I have had documents of lists that I had wanted to put into a Table afterwards, but there was no way that I could do it.... which brought me to my question to the Forum.....
I had made the artists' listing & songs of about 40 pages, about 7 years ago when I had a PC, and it was done in MS Word, and I haven't worked on it since then.
Being a veritable Newbie at the time, I had put the artists' name in one column, and the song title in another. When I had to insert a new artist and song, I would "Add Row Below" and then type the info in.
Little did I realize at the time that I had created a Table, without knowing it (I told you that I was a Newbie).
So when I started to work on those files this morning for the first time in a number of years, I wondered how could I put all the info from that Word document into a Table in Pages.
Then I could sort Ascending, instead of "Add Row Below" to squeeze the new name in when I wanted to add another artist.
Then I realized after posting the question on this Forum, that it ALREADY WAS in Table form.
I looked into the help section of Pages and found that I could sort the names in the Inspector Box in the Table Tab.
So, sorry to say I didn't discover a new technique of copying a list and then pasting the info into a new Table in one shot......
Sincerely sorry for the false alarm...
Jim

Copy and Paste While Editing Bookmarks

I am having a problem on my iPad 2 (ios5) copying and pasting while trying to edit bookmarks. I can copy and paste in the name of the bookmark, but cannot on the web address. This has become a problem because I would like to use a bookmarklet and I need to copy and paste the long code. Has anyone else had this issue and fixed it? The bookmarklet I am trying to use is called dotepub and it converts any web page to an epub format. I was shown this by an Apple employee and it worked great for him and will not for me. Thanks for any help.

Hi Gil,
Not a problem (I actually had to Check first)
I have not mentioned iChat 6 as I don't have a version in front of me (Although my son has Upstairs - and he was not here when I posted yesterday)
The iChat 4 Help says
This does require some manual dexterity.
Defcom's solution is a lot more elegant with the features iChat has.
8:23 PM Monday; August 8, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My Copy and Paste Function is not working

I recently upgraded to Firefox 16.02 and everything worked fine for a while but last night out of the blue my copy and paste function stopped working. As far as I know I have not done anything different. My copy paste function still works in Chrome and IE.
I have uninstalled/reinstalled Firefox and that did not solve the problem. As we speak I am running an AV scan and I also cleared the web cache and what not in Firefox. Ran it in safe mode... nothing seems to work!
Interestingly though, when I went to Copy and Paste the "trouble shooting info" from the clipboard to here on this page it worked fine.

For problems copying the results of Google translations, see these threads:
* [https://support.mozilla.org/en-US/questions/940979 i can't copy translate from google traslator, ctrl-c ctrl-v don't work]
* [https://support.mozilla.org/en-US/questions/940871 Can't copy translated text from Google Translate web page?]

Getting double copies (copy and past) of cast names in IMDb, older browser didn't do this.

Similar Messages

Maybe you are looking for