Getting DUMP Using 'REUSE_FIELD_CATALOG_MERGE'

Hi,
When im using the 'REUSE_FIELD_CATALOG_MERGE' FM im getting a dump like The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
79 characters wide.

Hi Kishore,
Do the following:
Go to Utilities -> Settings -> Select the tab ABAP EDITOR ->
Check the checkbox of Downward-Compat. Line length (72).
I hope this will remove that error.
Regards,
Nitin.

Similar Messages

Getting dump when using do_sum in alv field cat in the output of the report

Dear Freinds,
             Iam getting the alv report when i click on the segma field (Sum) on my salary
field iam getting dump. and also if i try to print my alv output iam getting dump , only
happening to my custom report.
i have used the following code pleae correct me .
This perform is used for Layout settings
perform st_layout_build using gs_layout.
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-outputlen   = 15.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
endform.
Variant
perform st_variant_init using gs_variant g_repid.
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
     call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
Please could any one let me know why iam getting dump when iam clicking for total
on my salary field.
Regards
latha

Dear Chandu,
my code iam giving in details
types : begin of ty_output_data,
        staffno     type pernr_d,
        staffname   type emnam,
        grade       type stell,
        orgunit     type orgeh,
        orgtext     type hr_mcstext,
        psgroup     type trfgr,      " Pay Scale Group
        salary      type maxbt,       "PAD_AMT7S,
        rrefunded   type pad_amt7s,
        leavepay    type pad_amt7s,
        mshortfal   type pad_amt7s,   " Medical Shortfall
        echkshfal   type pad_amt7s,   " Execute checkup shortfall
        ofindeduc   type pad_amt7s,   " Other Finance Deduction
        mtyprem     type pad_amt7s,   " maternity premium
        vpbonus     type pad_amt7s,   " VP/Bonus
        gratuity    type pad_amt7s,   " Gratuity
        vpay        type pad_amt7s,   " Variable pay
        mallowance type pad_amt7s,   " Meal Allowance
        overtime    type pad_amt7s,   " overtime
        other       type pad_amt7s, " OTHER
        pfundeecon type pad_amt7s,   " PFund Employee's Contribution
        banktrnsfer type pad_amt7s,   " Bank Transfer
        count       type i,
        end of ty_output_data.
data : i_final         type standard table of ty_output_data.
iam getting all my data in the internal table I_FINAL.
perform get_final_alv using i_final.
form get_final_alv using   fp_i_pyrol_final type ty_t_output_data.
*local variable declarations
data : l_v_idx      type sy-tabix.
*local work areas
data : l_wa_final type ty_output_data.
g_save = 'A'.
This perform is used for Layout settings
perform st_layout_build using gs_layout.
Field Catalog details
perform st_fieldcat_init changing gt_fieldcat.
Variant
perform st_variant_init using gs_variant g_repid.
g_repid = sy-repid.
perform st_comment_build using gt_list_top_of_page[].
if not fp_i_pyrol_final is initial.
    delete adjacent duplicates from fp_i_pyrol_final comparing all fields.
    call function 'REUSE_ALV_GRID_DISPLAY'
      exporting
         i_buffer_active        = 'X'
        i_callback_top_of_page = 'TOP_OF_PAGE'
        i_callback_program     = g_repid
        is_layout              = gs_layout
        it_fieldcat            = gt_fieldcat[]
       i_structure_name       = 'i_final'   "c_i_final "'objec'
       i_save                 = g_save
        is_variant             = gs_variant
      tables
        t_outtab               = fp_i_pyrol_final
      exceptions
        program_error          = 1
        others                 = 2.
    if sy-subrc ne 0.
      message e018. " Displaying the ALV GRID has failed
    endif.
endif.
endform.                    " get_final_alv
form st_layout_build using st_ls_layout type slis_layout_alv.
   st_ls_layout-no_input          = 'X'.
st_ls_layout-colwidth_optimize = 'X'.
st_ls_layout-zebra             = 'X'.
st_ls_layout-detail_popup      = 'X'.
endform.                    " st_layout_build
form st_fieldcat_init changing fp_i_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 1.
ls_fieldcat-fieldname    = 'ORGUNIT'.
ls_fieldcat-seltext_l    = 'Orgunit'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 2.
ls_fieldcat-fieldname    = 'ORGTEXT'.
ls_fieldcat-seltext_l    = 'Orgdesc'.
ls_fieldcat-no_out       = 'X'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 5.
ls_fieldcat-fieldname    = 'STAFFNAME'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffName'.
append ls_fieldcat to fp_i_fieldcat.
   clear ls_fieldcat.
ls_fieldcat-col_pos      = 4.
ls_fieldcat-fieldname    = 'STAFFNO'.
ls_fieldcat-no_out       = 'X'.
ls_fieldcat-seltext_l    = 'StaffNo.'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 6.
ls_fieldcat-fieldname    = 'GRADE'.
ls_fieldcat-seltext_l    = 'Grade'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 3.
ls_fieldcat-fieldname    = 'COUNT'.
ls_fieldcat-seltext_l    = 'Headcount'.
append ls_fieldcat to fp_i_fieldcat.
if the field name is 'Salary' then do a sum on this field.
IF fp_fname = c_betrg.
    l_wa_fieldcat-do_sum    = c_x.
ENDIF.
NOTE : IAM GETTING PROBLEM IN THE BELOW SALARY.
IAM JUST CHECKING ITSELF NOT ALLOWING ME TO EXECUTE
clear ls_fieldcat.
ls_fieldcat-fieldname    = 'SALARY'.
ls_fieldcat-seltext_l    = 'Salary'.
ls_fieldcat-col_pos      = 7.
ls_fieldcat-outputlen   = 20.
ls_fieldcat-do_sum       = 'X'.
ls_fieldcat-datatype     = 'CURR'.    "CURR
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 9.
ls_fieldcat-fieldname    = 'LEAVEPAY'.
ls_fieldcat-seltext_l    = 'Leave Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 10.
ls_fieldcat-fieldname    = 'MSHORTFAL'.
ls_fieldcat-seltext_l    = 'Med.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 11.
ls_fieldcat-fieldname    = 'ECHKSHFAL'.
ls_fieldcat-seltext_l    = 'EX.Chckup.Sfall'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 12.
ls_fieldcat-fieldname    = 'OFINDEDUC'.
ls_fieldcat-seltext_l    = 'Oth.Fin.Deduction'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 13.
ls_fieldcat-fieldname    = 'MTYPREM'.
ls_fieldcat-seltext_l    = 'Mat.Premium'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 14.
ls_fieldcat-fieldname    = 'VPBONUS'.
ls_fieldcat-seltext_l    = 'VP/Bonus'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 15.
ls_fieldcat-fieldname    = 'GRATUITY'.
ls_fieldcat-seltext_l    = 'Gratuity'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 16.
ls_fieldcat-fieldname    = 'VPAY'.
ls_fieldcat-seltext_l    = 'Variable Pay'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 17.
ls_fieldcat-fieldname    = 'MALLOWANCE'.
ls_fieldcat-seltext_l    = 'Meal.Allowance'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 18.
ls_fieldcat-fieldname    = 'OVERTIME'.
ls_fieldcat-seltext_l    = 'Overtime'.
append ls_fieldcat to fp_i_fieldcat.
    clear ls_fieldcat.
ls_fieldcat-col_pos      = 19.
ls_fieldcat-fieldname    = 'OTHER'.
ls_fieldcat-seltext_l    = 'Other'.
append ls_fieldcat to fp_i_fieldcat.
pfundeecon
clear ls_fieldcat.
ls_fieldcat-col_pos      = 20.
ls_fieldcat-fieldname    = 'P FUND EMPLOYEES CONTRIBUTION'.
ls_fieldcat-seltext_l    = 'P.Fund.Emp.Contrib'.
append ls_fieldcat to fp_i_fieldcat.
clear ls_fieldcat.
ls_fieldcat-col_pos      = 21.
ls_fieldcat-fieldname    = 'BANKTRNSFER'.
ls_fieldcat-seltext_l    = 'Payment'.
append ls_fieldcat to fp_i_fieldcat.
endform.                    " st_fieldcat_init
form st_variant_init   using st_gs_variant type disvariant
                             st_repid      like sy-repid.
clear st_gs_variant.
st_gs_variant-report = st_repid.
endform.                    " st_variant_init
form st_comment_build using   st_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
Listenüberschrift: Typ H
clear ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: not used for this type
ls_line-info = text-000.
append ls_line to st_lt_top_of_page.
endform.                    " st_comment_build
      FORM TOP_OF_PAGE                                              *
form top_of_page.
data: l_i_detailheader type slis_t_listheader.
To get the header for ALV
perform detail_header changing l_i_detailheader.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      it_list_commentary = l_i_detailheader.
endform.                    "top_of_page
form detail_header changing fp_i_detailheader type slis_t_listheader.
data: l_wa_header       type slis_listheader,
        l_v_time         type slis_edit_mask,
        l_v_date         type slis_edit_mask,
        l_v_abkrs        type char5,
        l_v_pabrj        type char8,
        l_v_pagno        type char10.
Local Constants
constants: l_c_h type char1 value 'H',
             l_c_1 type i     value '1',
             l_c_edit type char10 value '__.__.____',
             l_c_slash type c value '/'. " constant for slash
To display the report Header
l_wa_header-typ = l_c_h.
WRITE sy-repid TO l_wa_header-info LEFT-JUSTIFIED.
write text-014 to l_wa_header-info left-justified.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To display the Page no
l_v_pagno =   sy-pagno + l_c_1.
l_wa_header-typ = c_s.
l_wa_header-key = text-008. " Page No:
l_wa_header-info = l_v_pagno.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the User ID
l_wa_header-typ = c_s.
l_wa_header-key = text-009. " User ID
l_wa_header-info = sy-uname.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
To Display the Date/Time
l_wa_header-typ = c_s.
l_wa_header-key = text-010. " Date/Time:
l_v_time = sy-uzeit.
l_v_date = sy-datum.
write: sy-uzeit to l_v_time.
write sy-datum to l_v_date using edit mask l_c_edit.
concatenate l_v_date
              l_c_slash
              l_v_time into l_wa_header-info+0(25) separated by space.
append l_wa_header to fp_i_detailheader.
clear: l_wa_header, l_v_date.
To Display the Report Description
l_wa_header-typ = c_s.
l_wa_header-key = text-011.                " Report Description
l_wa_header-info = text-012.
append l_wa_header to fp_i_detailheader.
clear l_wa_header.
append l_wa_header to fp_i_detailheader.
endform.                    " detail_header
I will be greatful if any one can please help me in removing me the dump.
REGARDS
LATHA.

Getting dump with message CALL_FUNCTION_GET_NAME_FAILED

Hi,
My requirement is to write a report which will be run in background every Monday and the result will be sent to a user as email with excel as attachment.
I tried it by giving the email in 'Spool list recipient' in SM36. ut since the length of the output is more than 255 chars, so i thought of writing the email code as shown below.
DATA: l_message_content LIKE soli OCCURS 10 WITH HEADER LINE,
 l_receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
 l_packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
 l_listobject LIKE abaplist OCCURS 10,
 l_compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
 lw_object_hd_change LIKE sood1,
 l_compressed_size LIKE sy-index.
l_receiver_list-recnam = sy-uname .
l_receiver_list-esc_des = 'B'.
APPEND l_receiver_list.
lw_object_hd_change-objla = sy-langu.
lw_object_hd_change-objnam = 'Selection'.
lw_object_hd_change-objsns = 'P'.
Mail subject
lw_object_hd_change-objdes = 'KRB SAP Inconsistency Report'.
Mail body
APPEND 'Consisteny report between KRB and SAP' TO l_message_content.
CALL FUNCTION 'TABLE_COMPRESS'
 IMPORTING
 compressed_size = l_compressed_size
 TABLES
 in = <fs_table>
 out = l_compressed_attachment.
DESCRIBE TABLE l_compressed_attachment.
CLEAR l_packing_list.
l_packing_list-transf_bin = 'X'.
l_packing_list-head_start = 0.
l_packing_list-head_num = 0.
l_packing_list-body_start = 1.
l_packing_list-body_num = sy-tfill.
l_packing_list-objtp = 'ALI'.
l_packing_list-objnam = 'Selection'.
l_packing_list-objdes = 'SAP KRB Consistency Report'.
l_packing_list-objlen = l_compressed_size.
APPEND l_packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
 EXPORTING
 object_hd_change = lw_object_hd_change
 object_type = 'RAW'
 owner = sy-uname
 TABLES
 objcont = l_message_content
 receivers = l_receiver_list
 packing_list = l_packing_list
 att_cont = l_compressed_attachment.
I am getting the mail which i checked in SBWP but when i clicked on the attachment i am getting dump with message CALL_FUNCTION_GET_NAME_FAILED.
Short text
 Error when starting a Remote Function Call.
What happened?
 "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
 error) "
 An error occurred when executing a Remote Function Call.
Error analysis
 An error occurred when executing a Remote Function Call.
 "CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=223#CPIC program connection ended (read
 error) "
 Status of connection.... "RFC DRV=??? ???"
 Internal error code.... "RFC_IO4"
 Internal error: Invalid RFC handle.
Trigger Location of Runtime Error
 Program SAPMSSY1
 Include SAPMSSY1
 Row 266
 Module type (FORM)
 Module Name XAB_RUN_DRIVER
Please help in this.
<removed by moderator>
Edited by: Thomas Zloch on Sep 14, 2011 11:57 AM

Hi,
Check your RFC Connection Configuration. Also, check the used username & password.
Reward points if the asnwer is helpful.
Regards,

Error while taking dump using datapump

getting following error -
Export: Release 10.2.0.1.0 - Production on Friday, 15 September, 2006 10:31:41
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Starting "XX"."SYS_EXPORT_SCHEMA_02": XX/********@XXX directory=dpdump dumpfile=XXX150906.dmp logfile=XXX150906.log
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS while calling DBMS_METADATA.FETCH_XML_CLOB []
ORA-31642: the following SQL statement fails:
BEGIN "DMSYS"."DBMS_DM_MODEL_EXP".SCHEMA_CALLOUT(:1,0,0,'10.02.00.01.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 907
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DMSYS.DBMS_DM_MODEL_EXP' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6235
----- PL/SQL Call Stack -----
object line object
handle number name
2A68E610 14916 package body SYS.KUPW$WORKER
2A68E610 6300 package body SYS.KUPW$WORKER
2A68E610 9120 package body SYS.KUPW$WORKER
2A68E610 1880 package body SYS.KUPW$WORKER
2A68E610 6861 package body SYS.KUPW$WORKER
2A68E610 1262 package body SYS.KUPW$WORKER
255541A8 2 anonymous block
Job "XX"."SYS_EXPORT_SCHEMA_02" stopped due to fatal error at 10:33:12
Action required is contact customer support. And on metalink found a link that states it a bug in 10g release 1 that was suppose to be fixed in 10g release 1 version 4.
some of the default schemas were purposely dropped from the database. The only default schema available now are -
DBSNMP, DIP, OUTLN, PUBLIC, SCOTT, SYS, SYSMAN, SYSTEM, TSMSYS.
DIP, OUTLN, TSMSYS were created again.
Could this be a cause of problem??
Thanks in adv.

Hi,
Below is the DDL taken from different database. Will this be enough ? One more thing please, what shall be the password should it be DMSYS.....since this will not be used by me but system.
CREATE USER "DMSYS" PROFILE "DEFAULT" IDENTIFIED BY "*******" PASSWORD EXPIRE DEFAULT TABLESPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" QUOTA 204800 K ON "SYSAUX" ACCOUNT LOCK
GRANT ALTER SESSION TO "DMSYS"
GRANT ALTER SYSTEM TO "DMSYS"
GRANT CREATE JOB TO "DMSYS"
GRANT CREATE LIBRARY TO "DMSYS"
GRANT CREATE PROCEDURE TO "DMSYS"
GRANT CREATE PUBLIC SYNONYM TO "DMSYS"
GRANT CREATE SEQUENCE TO "DMSYS"
GRANT CREATE SESSION TO "DMSYS"
GRANT CREATE SYNONYM TO "DMSYS"
GRANT CREATE TABLE TO "DMSYS"
GRANT CREATE TRIGGER TO "DMSYS"
GRANT CREATE TYPE TO "DMSYS"
GRANT CREATE VIEW TO "DMSYS"
GRANT DROP PUBLIC SYNONYM TO "DMSYS"
GRANT QUERY REWRITE TO "DMSYS"
GRANT SELECT ON "SYS"."DBA_JOBS_RUNNING" TO "DMSYS"
GRANT SELECT ON "SYS"."DBA_REGISTRY" TO "DMSYS"
GRANT SELECT ON "SYS"."DBA_SYS_PRIVS" TO "DMSYS"
GRANT SELECT ON "SYS"."DBA_TAB_PRIVS" TO "DMSYS"
GRANT SELECT ON "SYS"."DBA_TEMP_FILES" TO "DMSYS"
GRANT EXECUTE ON "SYS"."DBMS_LOCK" TO "DMSYS"
GRANT EXECUTE ON "SYS"."DBMS_REGISTRY" TO "DMSYS"
GRANT EXECUTE ON "SYS"."DBMS_SYSTEM" TO "DMSYS"
GRANT EXECUTE ON "SYS"."DBMS_SYS_ERROR" TO "DMSYS"
GRANT DELETE ON "SYS"."EXPDEPACT$" TO "DMSYS"
GRANT INSERT ON "SYS"."EXPDEPACT$" TO "DMSYS"
GRANT SELECT ON "SYS"."EXPDEPACT$" TO "DMSYS"
GRANT UPDATE ON "SYS"."EXPDEPACT$" TO "DMSYS"
GRANT SELECT ON "SYS"."V_$PARAMETER" TO "DMSYS"
GRANT SELECT ON "SYS"."V_$SESSION" TO "DMSYS"
The other database has the DMSYS and the status is EXPIRED & LOCKED but I'm still able to take the dump using datapump??

Getting Dump at the time of opening WF

Hi,
we had created workflow WS93600011 in our development server. Till Friday 10.07.2009 it was working fine. We did some small change and activated the workflow. Till that time we were able to open the workflow template. On 13.06.2009 when we tried to open the workflow then it was giving dump, so accordingly we checked is this the problem with only 1 workflow template or all the workflow templates and we found that this is the problem with only 1 workflow template not all. So accordingly we did some analysis and I tried to check whether any SAP OSS Notes needs to be implemented but all the notes are already in place.
Please see below the what dump says...
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED_NO
Except. CX_SY_REF_IS_INITIAL
Date and Time 07/20/2009 13:30:44
Short text
Access via 'NULL' object reference not possible.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "CL_WFD_TASK_PROXY=============CP" had to be
 terminated because it has
 come across a statement that unfortunately cannot be executed.
What can you do?
 Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look at and manage termination messages, and you can also keep them for a long time.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not caught in procedure "CONSTRUCTOR" "(METHOD)", nor was it propagated by a RAISING clause. Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is: You attempted to use a 'NULL' object reference (points to 'nothing') access a component. An object reference must point to an object (an instance of a class) before it can be used to access components. Either the reference was never set or it was set to 'NULL' using the CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
 If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note. If you have access to SAP Notes, carry out a search with the following keywords:
 "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
 "CL_WFD_TASK_PROXY=============CP" or "CL_WFD_TASK_PROXY=============CM001"
 "CONSTRUCTOR"
 If you cannot solve the problem yourself and want to send an error notification to SAP, include the following information:
 1. The description of the current problem (short dump)
 To save the description, choose "System->List->Save->Local File (Unconverted)".
 2. Corresponding system log
 Display the system log by calling transaction SM21. Restrict the time interval to 10 minutes before and five minutes after the short dump. Then choose "System->List->Save->Local File (Unconverted)".
 3. If the problem occurs in a problem of your own or a modified SAP program: The source code of the program In the editor, choose "Utilities->More Utilities->Upload/Download->Download".
 4. Details about the conditions under which the error occurred or which actions and input led to the error.
 The exception must either be prevented, caught within proedure
 "CONSTRUCTOR" "(METHOD)", or its possible occurrence must be declared in the
 RAISING clause of the procedure.
 To prevent the exception, note the following:
System environment
SAP-Release 701
Application server... "ydedb"
 Network address...... "9.57.177.109"
 Operating system..... "AIX"
 Release.............. "6.1"
 Hardware type........ "00C15EAF4C00"
 Character length.... 16 Bits
 Pointer length....... 64 Bits
 Work process number.. 4
 Shortdump setting.... "full"
Database server... "ydedb"
 Database type..... "DB6"
 Database name..... "YDE"
 Database user ID.. "SAPYDE"
Terminal.......... "IBM-BE014934612"
Char.set.... "C"
SAP kernel....... 701
 created (date)... "Mar 30 2009 21:48:51"
 create on........ "AIX 2 5 00CB5A5B4C00"
 Database version. "DB6_81 "
Patch level. 37
Patch text.. " "
Database............. "DB6 08.02.*, DB6 09.*"
 SAP database version. 701
 Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 73728
MM Used. 3730104
MM Free. 457144
User and Transaction
Client.............. 210
 User................ 013319744
 Language key........ "E"
 Transaction......... "PFTC "
 Transactions ID..... "4A62BD9572AD004BE10080000939B16D"
Program............. "CL_WFD_TASK_PROXY=============CP"
 Screen.............. "SAPLRHWS 1001"
 Screen line......... 19
Information on where terminated
 Termination occurred in the ABAP program "CL_WFD_TASK_PROXY=============CP" -
 in "CONSTRUCTOR".
The main program was "SAPLRHW4 ".
In the source code you have the termination point in line 91
 of the (Include) program "CL_WFD_TASK_PROXY=============CM001".
 The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
 procedure "CONSTRUCTOR" "(METHOD)", but it was neither handled locally nor
 declared
in the RAISING clause of its signature.
The procedure is in program "CL_WFD_TASK_PROXY=============CP "; its source
 code begins in line
1 of the (Include program "CL_WFD_TASK_PROXY=============CM001 ".
Source Code Extract
Line SourceCde
61 a_task = l_task.
 62 ENDIF.
63 *-- load task
64 IF in_task IS NOT INITIAL.
 65 a_task = in_task.
 66 ENDIF.
67 CALL METHOD deserialize
 68 EXPORTING
69 in_display = in_display
 70 EXCEPTIONS
71 task_not_exists = 1
 72 task_already_locked = 2
 73 OTHERS = 3.
 74 IF sy-subrc = 2.
 75 *---- we couldn't lock in update mode -> create a proxy in display
 76 *---- mode
77 CALL METHOD deserialize
 78 EXPORTING
79 in_display = 'X'
 80 EXCEPTIONS
 81 task_not_exists = 1
 82 task_already_locked = 2
 83 OTHERS = 3.
 84 ENDIF.
85 IF sy-subrc <> 0.
 86 RAISE task_not_found.
 87 ENDIF.
88 ENDIF.
89 * create before image on the container
 90 TRY.
>>>>> CALL METHOD a_container->create_before_image
 92 EXPORTING
93 include_extensions = 'X'.
 94 CATCH cx_swf_cnt_container .
 95 ENDTRY.
96
97 ENDMETHOD. "constructor
If any body is having any idea to resolve this issue then please let me know. We are into the last stage of the development.
Thanks in advance for replying this issue.
Best Regards,
Prashant Raichurkar

Hi Rick,
The small change I did into the business object and added those parameter into the task and workflow through binding. And you are right the changed I did was on 10/07 and I am getting dump from 13/07.
Also I already copied to copy the workflow template into another, in the new template everything is blank including workflow container and template. It is as like new template.
Also one thing I want to tell you that I thought to activate previous version so the moment I click on choose version again I got the same dump.
Please let me know if you have any idea to resolve this issue.
Thanks & Regards,
Prashant

Getting Dump from a select query

Dear All,
Am selecting records from KEKO and storing into E1KEKO internal table. But am getting dump error. I need to send those E1KEKO records as idoc. Kindly help me out how to fix this dump.
SELECT * INTO CORRESPONDING FIELDS OF e1keko
    FROM keko
    WHERE keko~matnr = p_matnr
      AND keko~werks = p_werks
      AND keko~bwtar = 'Z06'
      AND keko~bwvar = 'Z06'.
    CLEAR t_idoc_data.
    t_idoc_data-segnam = c_segnam_e1keko.
    t_idoc_data-mandt = sy-mandt.
    t_idoc_data-sdata = e1keko.
    APPEND t_idoc_data.
    CLEAR e1keph.
endselect
Thanks in advance.
Anandhan

Hi,
If i use the below select query in a test program, that time also am getting the same dump.
DATA: e1keph TYPE e1keph,
      e1keko TYPE e1keko.
   SELECT * INTO CORRESPONDING FIELDS OF e1keko
    FROM keko
    WHERE keko~matnr = '000000000010801071'.
endselect.
(code}
The dump showing the below message
The reason for the exception is:
In a SELECT access, the read file could not be placed in the target
field provided.
Either the conversion is not supported for the type of the target field
the target field is too small to include the value, or the data does no
have the format required for the target field.
Thanks in advance
Anandhan

ZReport getting dump in Production but not in Quality and development

Hi,
There isa Zreport which displays daily stock in PP module.
It is getting dump in Production not in quality and development.
Since four days it is getting dump. Before that it is fine.
Please any one guide How to resolve.
Advance Thanks.

Runtime Error SAPSQL_IN_ITAB_ILLEGAL_OPTION
 Occurred on 29.08.2007 at 08:50:13
Invalid value in OPTION field of value table for IN itab operator.
What happened?
Error in ABAP application program.
The current ABAP program "ZPPRDR417" had to be terminated because o
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and admin
termination messages, especially those beyond their normal deletio
date.
Error analysis
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator
The IN itab operator is used with internal tables which
have the following structure:
 SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
 "EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here.
How to correct the error
Use only one of the permitted values in the OPTION column.
Information on where terminated
The termination occurred in the ABAP program "ZPPRDR417" in "WIP_STOCK_REP
The main program was "ZPPRDR417 ".
The termination occurred in line 330 of the source code of the (Include)
program "ZPPRDR417_FORM"
of the source code of program "ZPPRDR417_FORM" (when calling the editor 33
Source code extract
Caution: Program has changed
Caution: At time of termination, Active source code no longer available
003000 ? r_bwart-low = '106'.
003010 ? append r_bwart.
003020 ?
003030 ? r_bwart-low = '124'.
003040 ? append r_bwart.
003050 ?
003060 ? r_bwart-low = '125'.
003070 ? append r_bwart.
003080 ?
003090 ? select matnr
003100 ? werks
003110 ? into table i_marc
003120 ? from marc
003130 ? where ( matnr LIKE 'BILC%'
003140 ? OR matnr LIKE 'LGN%'
003150 ? OR matnr LIKE 'BRN%'
003160 ? OR matnr LIKE 'EBB%' )
003170 ? AND matnr NE 'BRN_DECLASSE'
003180 ? AND matnr NE 'BRN_SAF'
003190 ? and werks in r_werks.
003200 ?
003210 ? r_material-sign = 'I'.
003220 ? r_material-option = 'EQ'.
003230 ?
003240 ? loop at i_marc into wa_marc.
003250 ? r_material-low = wa_marc-matnr.
003260 ? append r_material.
003270 ? endloop.
003280 ? clear r_material.
003290 ?
 > ? if not i_matdoc is initial.
003310 ? select MBLNR
003320 ? MJAHR
003330 ? ZEILE
003340 ? BWART
003350 ? MATNR
003360 ? WERKS
003370 ? SHKZG
003380 ? MENGE
003390 ? UMWRK
003400 ? into table i_mseg_qty
003410 ? from mseg
003420 ? for all entries in i_matdoc
003430 ? where MBLNR eq i_matdoc-MBLNR
003440 ? and MJAHR eq i_matdoc-MJAHR
003450 ? and BWART in r_bwart
003460 ? and matnr in r_material
003470 ? and werks in r_werks.
003480 ?
003490 ? sort i_mseg_qty by matnr.

Getting dump for every senario

Hi experts
I am new to workflow i am getting dump on execution of every senario......
i am providing code of that one.... plz help me.
The following syntax error occurred in the program
CL_SWF_RUN_WIM_LOCAL==========CP :
"You can only define attributes in the PUBLIC, PROTECTED or PRIVATE sec"
Error in ABAP application program.
The current ABAP program "CL_SWF_RUN_WIM_FACTORY========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Thanks,
Prasad.

Hi,
This class CL_SWF_RUN_WIM_LOCAL is essential in tRFC to Execute the workflow.
The class would have affected.
1) Check any User exit or Badi used related to this Class, if so Deactivate those and check.
2) Then Still you getting the dump, check for note corrections.
Regards,
Surjith

Getting dump on implementing BADI HRPAD00INFTYBL

Hi Experts
I am using BADI (Enhancement Spot ) HRPAD00INFTYBL for updating the data through MSS,
the BADI gets executed properly through PA30, but shortly after that I am getting dump as :
    The exception 'CX_HRPA_INVALID_BUFFER_STACK' was raised, but it was not caught
     anywhere along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_HRPA_OM_INTEGRATION========CP' has to be
    terminated.
I am getting this for IT 0759.
Has anyone faced this earlier?
Is there any configuration or setting that needs to be one?
Kindly suggest?
regards
Ashwini

seems some integeration issue check t77so.
afrasyab

ALV tree: code is getting dumped............................

Hi all,
I want to display output using ALV tree. I havent worked on this before, So kindly provide me useful sample programs to display output using ALV tree.
Also i am creating field catalog using following code:
data : gt_fieldcatalog type lvc_t_fcat. "Fieldcatalog
get fieldcatalog
call function 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
 i_structure_name = 'TP_OUTTAB'
 CHANGING
 ct_fieldcat = gt_fieldcatalog.
But its getting dumped and "NO_FIELDCATALOG_AVAILABLE" exception is raised.
Also strucure TP_OUTTAB is as:
TYPES: BEGIN OF tp_outtab,
 aufnr TYPE aufk-aufnr,
 txt TYPE t003p-txt,
 maktx TYPE makt-maktx,
 charg TYPE afpo-charg,
 icon TYPE char4,
 prueflos TYPE afko-prueflos, prueflos _ r TYPE icon-id,
 ext_roses(5),
 expt_roses TYPE icon-id,
 zurl(8), "
 zurl_r TYPE icon-id,
 crstat_t TYPE icon-id,
 crstat TYPE icon-id,
 adres TYPE cochp-adres,
 END OF tp_outtab.
Kindly tell me why the code is getting dumped. Seems there is some problem with structure.
Regards,
Sachin

Hi,
try the following example.
TYPE-POOLS: SLIS.
DATA: BEGIN OF I_VBAK OCCURS 0,
 VBELN LIKE VBAK-VBELN,
 ERNAM LIKE VBAK-ERNAM,
 ERDAT LIKE VBAK-ERDAT,
 AUDAT LIKE VBAK-AUDAT,
 VAR1,
 END OF I_VBAK.
DATA: BEGIN OF I_VBAP OCCURS 0,
 VBELN LIKE VBAP-VBELN,
 POSNR LIKE VBAP-POSNR,
 MATNR LIKE VBAP-MATNR,
 CHARG LIKE VBAP-CHARG,
 END OF I_VBAP.
DATA: FLDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 LAYOUT TYPE SLIS_LAYOUT_ALV,
 KEY TYPE SLIS_KEYINFO_ALV.
DATA: IT_HEADER1 TYPE SLIS_T_LISTHEADER.
DATA: WA_HEADER1 TYPE SLIS_LISTHEADER.
DATA: IT_EVE1 TYPE SLIS_T_EVENT,
 WA_EVE1 TYPE SLIS_ALV_EVENT.
SELECT VBELN ERNAM ERDAT AUDAT FROM VBAK
INTO CORRESPONDING FIELDS OF TABLE I_VBAK
UP TO 20 ROWS.
SELECT VBELN POSNR MATNR CHARG FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE I_VBAP
UP TO 20 ROWS.
FLDCAT-FIELDNAME = 'VBELN'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'VBELN'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'SALES DOC.'.
FLDCAT-COL_POS = 0.
FLDCAT-KEY = 'X'.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERNAM'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'ERNAM'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'NAME OF PERSON'.
FLDCAT-COL_POS = 1.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERDAT'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'ERDAT'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'RECORD DATE'.
FLDCAT-COL_POS = 2.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'AUDAT'.
FLDCAT-TABNAME = 'I_VBAK'.
FLDCAT-REF_FIELDNAME = 'AUDAT'.
FLDCAT-REF_TABNAME = 'VBAK'.
FLDCAT-SELTEXT_M = 'DOCUMENT DATE'.
FLDCAT-COL_POS = 3.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'POSNR'.
FLDCAT-TABNAME = 'I_VBAP'.
FLDCAT-REF_FIELDNAME = 'POSNR'.
FLDCAT-REF_TABNAME = 'VBAP'.
FLDCAT-SELTEXT_M = 'SALES DOC ITEM'.
FLDCAT-COL_POS = 4.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'MATNR'.
FLDCAT-TABNAME = 'I_VBAP'.
FLDCAT-REF_FIELDNAME = 'MATNR'.
FLDCAT-REF_TABNAME = 'VBAP'.
FLDCAT-SELTEXT_M = 'MATERIAL NO'.
FLDCAT-COL_POS = 5.
APPEND FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'CHARG'.
FLDCAT-TABNAME = 'I_VBAP'.
FLDCAT-REF_FIELDNAME = 'CHARG'.
FLDCAT-REF_TABNAME = 'VBAP'.
FLDCAT-SELTEXT_M = 'BATCH NUMBER'.
FLDCAT-COL_POS = 6.
APPEND FLDCAT.
CLEAR FLDCAT.
LAYOUT-EXPAND_FIELDNAME = 'VAR1'.
KEY-HEADER01 = 'VBELN'.
KEY-ITEM01 = 'VBELN'.
CLEAR WA_EVE1.
WA_EVE1-NAME = 'TOP_OF_PAGE'.
WA_EVE1-FORM = 'TOP-OF-PAGE1'.
APPEND WA_EVE1 TO IT_EVE1.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IS_LAYOUT = LAYOUT
 IT_FIELDCAT = FLDCAT[]
 IT_EVENTS = IT_EVE1[]
 I_TABNAME_HEADER = 'I_VBAK'
 I_TABNAME_ITEM = 'I_VBAP'
 IS_KEYINFO = KEY
TABLES
 T_OUTTAB_HEADER = I_VBAK
 T_OUTTAB_ITEM = I_VBAP
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP-OF-PAGE1. WA_HEADER1-TYP = 'H'.
WA_HEADER1-INFO = 'Hierarchical Display'.
APPEND WA_HEADER1 TO IT_HEADER1.
CLEAR WA_HEADER1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 IT_LIST_COMMENTARY = IT_HEADER1[].
REFRESH IT_HEADER1.
ENDFORM. "TOP-OF-PAGE1
Reward points,if it is useful.
Thanks,
chandu.

Getting dump on selecting the businessrole SALESPRO(CRM WEBUI)

Hi,
I am getting dump as soon as I click on CRM Business role: SALESPRO in CRM WEBUI. The dump says: 'Define component usage "Tag_clouds".
Could you please let me know, how to solve this issue?
Thanks,
Sandeep

Hello ,
We are trying to create some tag clouds using the following classes :
cl_wcf_tc_factory=>get_object_from_genil_id
cl_wcf_tc_factory=>add_tag
cl_wcf_tc_factory=>save
The tag is created fine , bu unfortunatley , it generates the following dump when a user cliks on it.
Exception Class
CX_SY_IMPORT_MISMATCH_ERROR
Error Name
CONNE_IMPORT_WRONG_FIELD_TYPE
Program
CL_CRM_GENIL_CONT_SIMPLE_OBJ==CP
Include
CL_CRM_GENIL_CONT_SIMPLE_OBJ==CM007
ABAP Class
CL_CRM_GENIL_CONT_SIMPLE_OBJ
Method
IF_GENIL_CONT_SIMPLE_OBJECT~GET_KEY
Line
18
Long text
During IMPORT it was ascertained that the object in the dataset has a different object type to the target object, or the structure of the complex object is not compatible with the structure of the target object. The target object has either a different length, a different number of decimal places or a different data type to the object that is to be imported.
Can you please advise ?
Thanks.

Phap_catalog tcode getting dumped on status flow tab

Dear Friends,
I am getting dumped in my system in tcode phap_catalog when we execute this tcode & double click on personal appraisals.there is two tabs. when we click on status flow tab, it getting dumped message type x.
Plz suggest.
Ankit

For adding information, i am adding some part of dump..
Runtime Error
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
     An error occurred when the system tried to process the commands
     from the Automation Queue on the presentation server.
     There are several possible reasons for this:
     - The installation of the SAP GUI on the presentation server is
     faulty or obsolete.
     - There is an error in the application program
     - There is an error in the SAPGUI or an integrated control
Procedure
     1. Make sure that you have imported the appropriate Support
     Package, the current kernel, and GUI patch for the release of your
     system
     2. Check whether the error occurs locally on one or a few PCs, or
     generally on all PCs. Note whether the error only occurs for some
     users, for example because of a specific Customizing setting.
     If it only occurs locally, this suggests an installation problem
     with the PC. Check the installation; if necessary, reinstall the
     software. In the dump, search for the SY-MSGLI field, since it may
     point to the cause of the error.
     3. Activate the Automation Trace (in accordance with SAP Note
     158985).
     4.Start the transaction and continue until the screen immediately
     before the dump.
     5. From the System -> Utilities menu, choose Autom. Queue,
     Synchronous Processing.
     The status bar of the GUI displays the text:
        "Automation synchron flush mode on"
     6. If you now proceed with the application, the short dump will
     display the ABAP call that caused the error; the Automation Trace
     will contain the error on the presentation server.
System environment
SAP Release.............. "620"
Transaction......... "PHAP_CATALOG "
Program............. "SAPLOLEA"
Screen.............. "SAPLHRHAP_C_UI_CATALOG 1000"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in "AC_SYSTEM_FLUSH".
The main program was "RHHAP_APPRAISAL_CATALOG ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
End of runtime analysis
Edited by: Ankit on Aug 22, 2008 10:05 AM

Getting dump in generating IDOC when creating sales order

hi all,
I am using a std FM IDOC_OUTPUT_TPSDLS to generate the outbound delivery create/change.
and i have created a new output type and added in V2 application and the Processing program is RSNASTED & Form ALE_PROCESSING.
When I create the SAles Order in VA01, I am getting dump " Update terminated" and checked in ST22.
I am getting this error "An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_PARAM_MISSING',
was neither
caught nor passed along using a RAISING clause, in the procedure
"NEW_DYN_PERFORM" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When calling the function module "IDOC_OUTPUT_TPSDLS", one of the parameters
needed according to the interface description was not specified.
This parameter was "DELIVERY".
I am not sure why this error...because I am using only starndard FM & program, why this issues..
Kindly guide me
thanks

True what u r telling.....................
I am trying to create a IDOC while creating,change a delivery.
should i have to change the Processing program RSNASTED , form ALE_PROCESSING ???... or IDOC funciton module is wrong?
please need ur advice
thanks for your input

I can't sign in to iCloud. My Apple ID is valid, but os not an iCloud account. How do I get to use iCloud?

I can't sign in to iCloud. My Apple ID is valid, but is not valid for iCloud. How do I get to use iCloud?

You are getting this message because you are trying to create an iCloud account on a PC by signing with your Apple ID. You can only sign into an existing account on a PC. You first have to create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

Can't get and use an apple id for cloud or apps or store when i try to change it it will let me but then everytime it keeps asking me to chang e password everytime cant get my computer to just accept one password that will keep

can't get and use an apple id for cloud or apps or store when i try to change it it will let me but then everytime it keeps asking me to chang e password everytime cant get my computer to just accept one password that will keep

Just what are you doing and what is the exact wording of the message you are getting?

Getting DUMP Using 'REUSE_FIELD_CATALOG_MERGE'

Similar Messages

Maybe you are looking for