Getting Duplicate data Records error while loading the Master data.

Hi All,
We are getting Duplicate data Records error while loading the Profit centre Master data. Master data contains time dependent attributes.
the load is direct update. So i made it red and tried to reloaded from PSA even though it is throwing same error.
I checked in PSA. Showing red which records have same Profit centre.
Could any one give us any suggestions to resolve the issues please.
Thanks & Regards,
Raju

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Similar Messages

'Overlapping Time Intervals' error while loading the Master Data

Guys,
          Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM         Valid To                  Valid From                 Edition
1001             12/31/9999             04/01/2010                2010.1.1
1001             01/31/2010             03/01/2010                2010.1.2
1001             12/31/9999             02/01/2010                2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.

FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash

Error while loading the master data

Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.S

Hi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1.

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Getting the error while loading the master data

Hi
i have tried to delete the master data using right click and delete master data, but still there are data.
Now i am trying to load this master data again then i am getting the message "0 from 50033 records"
and data load got failed with error message "master data/text of 0vendor already deleted "
and due to this i could not able to load my other infoprovider (which have 0 vendor).
can any body help me, it very urgent...
thanks and regards
Anupam

Hi Raju,
I assume there are no routines written in the update rules and also you ae directly loading the data from R/3 ( not from any ODS). If that is the case then it could be that, the data maintained in R/3 has overlapping time intervals (since time dependency of attributes is involved). Check your PSA if the same profit center has time intervals which over lap. In that case, you need to get this fixed in R/3. If there are no overlapping time intervals, you can simply increase the error tolerance limit in your info-package and repeat the load.
Hope this helps you.
Thanks & Regards,
Nithin Reddy.

Error While Loading the Master Data from R3

Hi Gurus,
I am loading the masterdata from R3.I have enhanced the Datasource .In that datasource there is a field DATUB ( Valid To Date).For this field I have wriiten the User Exit at the R3 side.Now I am loading the data in BW.But I am not getting the values for DATUB field in the BW, though they are there at the R3 side.
I have done following to analyse the issue.
1.Have checked the datasource at the R3 from RSA3.Its populating the field DATUB correctly.
2.Have deleted the whole masterdata and tried to load again.But no success.
3.Have tried to load the data for the perticular Bill of Material(BOM).Then it get loaded correctly along with the value of DATUB.But when i tried loading the entire data i am not getting the field DATUB populated.
Please help me out.Its urgent.
Thanks.
Shalaka

Hello,
I finally got the solution to my problem.
If you append a field to generic datsource then you should check the tick in datasource for "field only". Or else you would not get the values handed over to BW.
Please check following link for more details about this "field only" setting for Generic datasources.
http://help.sap.com/saphelp_tm70/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
Regards,
Anuj

Using FF to access my AOL emails I get "There was an error while loading the message. Please try again later." Access is OK via Chrome, IE & AOL's own desktop.

"There was an error while loading the message. Please try again later." is a recent (3/4 days) error message I get when accessing my AOL emails. I can access the page and move them between states but cannot open them to read. Chrome, IE and AOL's own desktop open emails OK & can access them from the wife's PC using my AOL details. Have cleaned the history tab of everything in FF, have also removed it with add/rem progs and reinstalled - still I get the above message.
PC - W7 Pro 64 bit, 16GB RAM etc.

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

WARNING: Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be recovered unless they have been backed up to an external device!

Error when loading the master data

Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.

Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo

Error while loading to Master data attribute 0product

Hi experts,
While loading the data from 0material to 0product master data attribute i am getting a error ' 0MATERIAL : Data record 2421 (''300000072 '):Version '300000072 ' is not valid. I request u all to help me to solve this error.
Diagnosis
    Data record 2421 & with the key '300000072 &' is invalid in value
    '300000072 &' of the attribute/characteristic 0MATERIAL &.
System Response
    The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
    If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This
    allows you to maintain your master data.
Please let me know what could be the problem....
Regards,
Prashanth
Edited by: Prashanth Shetty on Jul 16, 2008 7:42 AM

Hi,
   The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

Error while loading 0Plant master data in PSA

Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked' .
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.

Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V

Error while loading to master data infoobject hierarchy (0RPM_PORT_ITEM_HIERARCHY)

Hi All,
I have an issue while loading the data from psa to master data infoobject.
DTP Error:
When we had extracted the data from ECC to PSA, the values for field "IOBJNM" are not populated for 0RPM_PORT_ITEM_HIERARCHY
Thus it is throwing an error while populating this data to the target.
From where this field will fetch the values?
Why these values are not being populated from ECC?
Will there be any issue from BI side? can anyone help me on this.

Hi Raman,
yes I had extracted data in RSA3
There are no values for the field "object".
Do you have any idea why these values are missing?

Error while loading customer master data through Idoc (DEBMAS) from BODS

Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan G

Hi, did you referred this link : Error during customer master mass update through XD99

Getting error while loading omaterial master data

Hi all,
I am loading data to omaterial_attr .i am getting an error material number version is invalid.but in source system itself it shows that perticular material number master data also.what's the problem? there are totally 3000 records.only for 100 records i am getting that error.but in sourcesystem(r/3) i have all these material number values also.
0MATERIAL : Data record 12 ('A02 '): Version 'A02 ' is not valid

Hi Rama,
I dont think this error is due to space because if u have specified ALL_CAPITALS in RSKC then space is included in it by default. Moreover, there wont be any space in ur data in PSA.
Have you maintained the material number format???? If not, this error can come.
Assign points if this helps.
Regards,

Error while loading the transaction data ..

Hello Expert
I need your help in resolving this error, I have encountered this below error while uploading transaction data from the cube 0PP_C14 even though my transformation file is giving the accepted record
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide = 0PP_C14
SELECTION = <?xml version="1.0" encoding="utf-16"?><Selections xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><Selection Type="Selection"><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-DESIGNER
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-PLANK
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-HALF-WIDTH
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-NON-STD-WIDTH
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-RECESS
</LowValue><HighValue /></Attribute><Attribute><ID>0EXTMATLGRP</ID><Operator>1</Operator><LowValue>NAFS-STD-WIDTH
</LowValue><HighValue /></Attribute><Attribute><ID>0BASE_UOM</ID><Operator>1</Operator><LowValue>4FT</LowValue><HighValue /></Attribute><Attribute><ID>0PLANT__0SALESORG</ID><Operator>1</Operator><LowValue>SILD</LowValue><HighValue /></Attribute><Attribute><ID>0PLANT__0SALESORG</ID><Operator>1</Operator><LowValue>SILE</LowValue><HighValue /></Attribute></Selection><Selection Type="FieldList"><FieldID>0EXTMATLGRP</FieldID><FieldID>0FISCPER</FieldID><FieldID>0PLANT</FieldID><FieldID>0PLANT__0SALESORG</FieldID></Selection></Selections>
TRANSFORMATION = \ROOT\WEBFOLDERS\SIL\MIS\DATAMANAGER\TRANSFORMATIONFILES\COST SHEET\0PP_C14_FOR_DOMESTICS_EXPORT.xls
TARGETMODE = Yes
RUNLOGIC = No
CHECKLCK = No
[Message]
Task name CONVERT:
No 1 Round:
An exception with the type CX_ST_MATCH_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause
System expected a value for the type g
model: MIS. Package status: ERROR
Any one has the solution of it ..?

Hi,NEERAJ DEPURA
I think it is caused by incorrect character entries you made in the 'set selection'
screen when you filtering data.
Because I was able to reproduce the error in the way below:
1, I changed my input language to Chinese.
2,In the 'set selection'screen,I selected '0company_code’ as the attribute ,operater is ‘=’,
and enter the value ‘SGA01’.
3,Saved the selection and ran the package. it failed with the same error as you got.
In my cube the value ‘SGA01’ is in English so in the ‘set selection’ screen if it is
entered in Chinese ,a mismatch will occur and result in the error.
If I change my input language to English and enter the valune ‘SGA01’ again in the ‘set
selection’screen,the error won’t occur.
Please check your entered values in the ‘set selection’screen.
Hope it solves your issue

Getting Duplicate data Records error while loading the Master data.

Similar Messages

Maybe you are looking for