Getting End of file communication Error
Hi,
I am having a query , which has to return the rows satisfying both the conditions in a single column. I got the output if i am using self join with 2 aliases concept in that query. But actually the table is a partition table containing some millions of records in that and also getting inserted dyanmically.
When i apply the same query for a table which is not partitioned, it is not showing any error, even if i am using only one alias.
Can any one pls explain me this concept.
Thanks
With Regards
Vedavathi . E
'Urgent issues' must be addressed to Oracle support, before you get an answer you may read this on metalink:
ORA-03113 on Unix - What Information to Collect
Doc ID: Note:17613.1
Werner
Similar Messages
-
End of flile communication error in IBOT delivered excel file
Hi All,
We have scheduled an IBOT which will run 6 days a week. Report( Pivot view ) is pulling 4 weeks of data. I ran the report on Saturday IBOT got delivered and in excel sheet it displays report fine with 4 weeks of data. On Monday IBOT got delivered, when I open the IBOT it gives " Cell Too Large to Open " error message on excel. Tried to open as CSV file and it gives below error message.
Error message reads an ORA error. ' End of file communication error '. Same report works fine
Dont know why same report runs fine some times and why gives end of file communication error some times. What can be the work around or alternative solution for this issue.
Thanks
AariHi All,
We have scheduled an IBOT which will run 6 days a week. Report( Pivot view ) is pulling 4 weeks of data. I ran the report on Saturday IBOT got delivered and in excel sheet it displays report fine with 4 weeks of data. On Monday IBOT got delivered, when I open the IBOT it gives " Cell Too Large to Open " error message on excel. Tried to open as CSV file and it gives below error message.
Error message reads an ORA error. ' End of file communication error '. Same report works fine
Dont know why same report runs fine some times and why gives end of file communication error some times. What can be the work around or alternative solution for this issue.
Thanks
Aari -
Unable to open database : error , ora-03113 end of file communication
Hi Guys ,
I am facing a serious issue with my database
machine Oracle Linux Tikanga 5
database : 10.2.0.1
Error : ora-03113
I was trying to drop a logfile , while inserting the data ....
I restored and tried recovering it but it recovers with message , media recover complete but doesnot allows to open the database
gives the same error : Error : ora-03113 end of file communication
alert_log shows
alter database recover if needed
start
Media Recovery Start
ORA-264 signalled during: alter database recover if needed
start
Wed Jan 9 16:20:18 2013
db_recovery_file_dest_size of 2048 MB is 40.79% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Wed Jan 9 16:22:02 2013
alter database recover datafile list clear
Wed Jan 9 16:22:02 2013
Completed: alter database recover datafile list clear
Wed Jan 9 16:22:02 2013
alter database recover datafile list
1 , 2 , 3 , 4 , 5
Completed: alter database recover datafile list
1 , 2 , 3 , 4 , 5
Wed Jan 9 16:22:02 2013
alter database recover if needed
start
Media Recovery Start
ORA-264 signalled during: alter database recover if needed
start
Wed Jan 9 16:22:07 2013
alter database open
Wed Jan 9 16:22:07 2013
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=2049
Wed Jan 9 16:22:07 2013
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=2051
Wed Jan 9 16:22:07 2013
Repairing half complete open of thread 1
Wed Jan 9 16:22:07 2013
Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
Wed Jan 9 16:22:08 2013
Errors in file /d1/app/oracle/oradata/orcl/bdump/orcl_lgwr_1966.trc:
ORA-00600: internal error code, arguments: [3712], [1], [1], [0], [445262], [0], [445261], []
LGWR: terminating instance due to error 470
Instance terminated by LGWR, pid = 1966
can you please suggest on the same ..
ThanksDue to the nature of the error and to prevent any trial-and-error, I would highly recommand you to open a service request with Oracle asap.
Oracle too recommands the same.
Thanks... -
End of file 16072 error encore V 1.5.1.42735
I've been at this awhile and usually don't have much trouble so this is beginning to make me a little cranky. I used to get this error once in a while for the usual reasons (vid and audio not same length and mismatch on time/duration on animated buttons). Latley it has started to come up on every single project and seems way random.
Here is the typical scenario. I Export a dozen or so movies from PPro 1.5 at MS DV AVI. I import as timeline in Encore 1.5.1. I use automatic transcode and build the DVD as an image on my HD to test. I get the end of file 16072 error.
This is how a I trouble shoot. I create a new Encore project called test. I import the .m2v and the .wav files from the Transcodes folder of the Encore project one at a time. In this way I avoid retranscoding the movie saving a little time. The test project has no menus or buttons and only one timeline set as first play. I build a dvd image on my HD one at a time until I get the same error in the "test" project. I then go back in PPro and work on the the Timeline that I exported the movie from. Sometimes I can just delete the last clip from the timeline and the error goes away. Then I edit the last clip back in, re-export and retest it. Most of the time it is then OK. If it is I then bring it back into the Encore project I was working on in the first place and works. Other times that does not work and I can keep going back one clip at a time until I find the problem or sometimes it is just quicker to re-edit the whole section of source material into a new timeline.
The project I am working on right now started out as seven hours of DV. I am working on the third DVD I created from it after editing down to about three hours of final footage broken up into about 36 timelines. This last Encore project has 14 timelines and three of them produce the error when testing. I just fixed one of them by deleting the last clip and testing. The other two are next up but jeeze this is getting old. No motion menus or animated buttons. The problem is with the .avi as in the test project I use it is the only timeline and set to first play with no menus or buttons.
I am looking for some informed advice from someone who has specific experience with this error and has whipped it. I have read more than a few posts from people that have gotten this error and with most it is because the material they are working with has caused it with good reason. That does not seem to be the case with my projects. I edit the same way, export the same way from PPro. I import in Encore and build basically the same project over and over. Why would I get this seemingly random error. Can I avoid it?
I have the Adobe Video Collection Professional, paid a ton for it and it does everything I need. I can't upgrade with out building an entirely new system to run the new software anyway and the money is not there for it.
I have 39 hours of video I need to edit into hundreds of timelines and this error is eating me alive. This latest project with 7 hours has had days added to it because of this error. Please help me learn solve ar avoid it.
Thanks in advance,
MarkI wonder if there could be some slight Durational difference between the muxed streams, since the Audio is in Audio Units and the Video is in Timecode. Just a sliver of difference *could* yield a problem.
I've read of similar with other muxed sources but never a definitive answer on why En does not pick up and correct this, or how it could occur with the Export from PrPro, or other NLE. Still, it does seem to happen on occasion.
Also, I usually have a bit of Black Video at the Head, and then some at the Tail, so in PrPro, my Video Timeline is always a bit longer, than my Audio Timeline. As there is no Audio signal at the end, PrPro can deal with it perfectly. Will have to try some muxed sources (not my normal workflow) to see if there is something else afoot.
Just thinking here,
Hunt -
End of file communication channel in win 2003
Hai All,
I have a problem when installing oracle 8i in windows 2003 server - initializing database stage -error comes - end of file communication channel. service pack 1 is exist in 2003 server. how this resolved.. Please help
ShijuI am not sure that Oracle8i supports Win 2003 platform.
-
I can't see my Canon MG5220 printer... Initially I was getting "there is a communication error" so I rebooted everything, reset the printing system, reinstalled the driver and still NO luck! I see no printers available in the Print & Scan area. If I click "+" it seems to see the scanner, but never the printer. HELP!
The printer component uses a different protocol to advertise itself on the network compared to the scanner component and it can take several seconds longer to appear after the scanner has.
That said, with the introduction of AirPrint, the MG should be seen as Bonjour Multifunction in the Add Printer window, as shown below.
Selecting this Bonjour Multifunction entry will create a printer using AirPrint and a scanner using the iCA driver.
So do you see the MG5220 as Bonjour Multifunction or just Bonjour? -
Getting end-of-file on communication channel error on this query
Hi guys,
I'm getting the end-of-file on communcation channel error when running the following query in SQL PLUS, If run it in a stored procedure called through code of JDBC, it gave "no more data to read from socket" error. Any idea what went wrong? kind of frustrated now. We are using the Oralce 9.0.1.4.0, which suppose to fix some sdo_uion and sdo_buffer bugs. Thanks a lot!!
select SDO_GEOM.SDO_BUFFER((SELECT SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(GEOLOC, 0.011119487)) FROM GEOTEL_SOURCE where MSA='5000' and COMPANY_NAME ='AMERICAN FIBER SYSTEMS'),1.0,5,'unit=MILE arc_tolerance=0.05') from GEOTEL_SOURCE a where a.MI_PRINX = 1;Hi Daniel,
Just tried the 9.2.0.2 patch, seems to work better now. At least I don't get the end-of-file on communication channel error. But how about the speed thing? I isolated the problem, and find out that sdo_aggr_union is taking too long to finish( 1 Hour!!! for 2300 lines with the same city. Any clue to optimize it, I tried some hint like /*+ordered*/ No_Merge and something like that, does not improve though. Thanks! -
Extract is getting end-of-file on communication channel
Dear All,
source
Os-Solaris 10
db-10.2.0.4(2 node RAC)
GG-11.1.1.1.1
target
Os-Solaris 10
db-10.2.0.4(2 node RAC)
GG-11.1.1.1.1
Daily my extract process is getting abended with the following error..
2012-01-16 19:27:30 ERROR OGG-00665 Oracle GoldenGate Capture for Oracle, E99_CRM.prm: OCI Error describe for query (bad syntax) (status = 3113-ORA-03113: end-of-f
ile on communication channel), SQL< SELECT owner, object_name, object_type FROM dba_objects WHERE object_id = 1136215 AND object_type in ('TABLE',
'INDEX', 'INDEX PARTITION',>.
anybody faced this problem ..? because of this extract is getting abended .
Can someone help me , how to identify the rootcause for this issue.
Thanks a lot for your time and patience....
MvkLooks like your session was nailed by ORA-03113, which can happen in SQL*Plus or anywhere else a client is connecting to Oracle. You can check your network, sqlnet logs, and see the troubleshooting notes on MOS for this, because there are lots of reasons why this can occur. The good news is that this isn't necessarily a problem with GoldenGate.
-
Ora:03113 end-of-file communication
hi,
i am using oracle 10g(10.2.0.3.0) version in windows server service pack 2. I have connected has one of the user and everytime when i leave my connection in ideal state for 30 mins or more and then i start execute any query i get the following error.
ORA-03113: end-of-file on communication channel
Is there any internal parameters to edit so that i can minimize or avoid this error????
thanks in advanceDear 793097,
ORA-03113: end-of-file on communication channelThis can happen because of a list of problems or configurations or event connection issues. However, you have already defined the situation that leads it to occur.
Whenever a user connects to a database and stays for a while without doing absolutely nothing, the Oracle can disconnect the relevant session. As the prior post has shown, this can based on Oracle profiles or maybe you are having connection problem but you have no idea about it, yet.
Please also read the following error explanation;
+"+
+*ORA-03113: end-of-file on communication channel*+
+Cause: The connection between Client and Server process was broken.+
+Action: There was a communication error that requires further investigation. First, check for network problems and review the SQL*Net setup. Also, look in the alert.log file for any errors. Finally, test to see whether the server process is dead and whether a trace file was generated at failure time.+
+"+
Hope That Helps.
Ogan -
Before reaching the high unit, 'End of file reached' error pops up.
Following is the <distributed-scheme> of my cache server.
<distributed-scheme>
<scheme-name>dom-dist</scheme-name>
<service-name>DOM-CACHE</service-name>
<backup-count>1</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-name>dom-overflow</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>LocalSizeLimited-dom</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<eviction-policy>LFU</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
*<high-units>8192</high-units>*
<unit-factor>1048576</unit-factor>
<lh-file-manager>
<directory>/home/coherence/cachedata</directory>
<file-name>{cache-name}.store</file-name>
</lh-file-manager>
</external-scheme>
</back-scheme>
</overflow-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<local-scheme>
<scheme-name>LocalSizeLimited-dom</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>350</high-units>
<unit-calculator>BINARY</unit-calculator>
<unit-factor>1048576</unit-factor>
</local-scheme>
</distributed-scheme>
+I could see the file {cache-name}.store is saved but before reaching the high unit (8192) following error pops up and then the node shutsdown.+
Error:
2009-07-28 08:41:42.253/52233.963 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=2):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)2009-07-28 08:41:42.254/52267.134 Oracle Coherence GE 3.6.1.0 <D5> (thread=Cluster, member=1): Member 2 joined Service DOM-CACHE with senior member 3
2009-07-28 08:41:50.228/52275.108 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=1):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)
Edited by: online247 on Jul 19, 2011 3:07 PMHi Online247,
Despite LH has been deprecated and overflow-scheme is not used by many people, using disk based overflow as shown at the URL below could be useful for what you are trying to achieve:
http://hi.baidu.com/chenjf79/blog/item/42be1a2adf6d059c033bf691.html
Hope it helps.
-Cris -
NQUDMLExec throws end of file reached error
Hi,
I have tried to execute the below command in windows command line .
[code] nQUDMLExec -U user -P pass -I test.cfg -B test.rpd -O C:\test.rpd[/code]
My test.cfg contains some db credentials as repositary variable.
it throws the below error always:
---------------ERROR(s)---------------
[nQSError: 28002] Near Line 12, Near <{>: End of file has been reached.
Please note that the test.cfg contains 12 lines totally. the error is reported in the last line always.
Any thoughts on this?
Thanks,
Pandeeswaran28002 Near Line @1%d, Near <@2%ls>: End of file has been reached.
Cause. The singly or doubly quoted string does not have a matching quote.
Response. Add single or double quote at the end. -
End of File reached error message when running report
I am running this report in two different places. On my own machine it seems to run fine however when I run it for a client on their server I get a message saying end of file reached and the report won't come up. Any suggestions?
Hi Jeff,
In what context are you running the report? Are you talking about refreshing the data?
Is this in crystalreports.com or the CR designer or some custom built application?
This forum is specifically for the crystalreports.com, Information OnDemand, and Applications OnDemand web applications so this might be the wrong place for your question. You might want to try the Crystal Reports Design or one of the Crystal Reports SDK forums instead.
Cheers,
Steve -
Coherence 3.5
We are getting following exception -
Caused by: com.tangosol.io.lh.LHIOException: /local/home/beuser/cachestore/lh03861950282677193497~, Primary file, Reading, Group 25253, Frame 25253: End of file reached. at com.tangosol.io.lh.LHSubs.ReadFrame(LHSubs.java:2173) at com.tangosol.io.lh.LHSubs.GetPrimaryFrame(LHSubs.java:1583) at com.tangosol.io.lh.LHSubs.SetupKeyId(LHSubs.java:997) at com.tangosol.io.lh.LHSubs.FindKeyId(LHSubs.java:915) at com.tangosol.io.lh.JLHFile.updateRecord(JLHFile.java:433) at com.tangosol.io.lh.JLHFile.writeRecord(JLHFile.java:616) at com.tangosol.io.lh.LHBinaryStore.store(LHBinaryStore.java:128) at com.tangosol.net.cache.SerializationMap.putAll(SerializationMap.java:201) at com.tangosol.net.cache.OverflowMap.putOne(OverflowMap.java:3086) at com.tangosol.net.cache.OverflowMap.processFrontEvent(OverflowMap.java:2592) at com.tangosol.net.cache.OverflowMap.processEvent(OverflowMap.java:2448) at com.tangosol.net.cache.OverflowMap.prepareStatus(OverflowMap.java:2191) at com.tangosol.net.cache.OverflowMap.processDeferredEvents(OverflowMap.java:2763) at com.tangosol.net.cache.OverflowMap.evict(OverflowMap.java:3121) at com.tangosol.net.cache.OverflowMap.size(OverflowMap.java:390) at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onSizeRequest(DistributedCache.CDB:24) ... 6 more
Any pointers resolving this will be appreciated.
Thanks.Here is the cache config -
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>RECORD</cache-name>
<scheme-name>example-distributed</scheme-name>
<init-params>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="record.cache.size.limit">98566144</param-value>
</init-param>
</init-params>
</cache-mapping>
<cache-mapping>
<cache-name>COUNTERS</cache-name>
<scheme-name>example-no-expiry</scheme-name>
<init-params>
<init-param>
<param-name>cache-unit-type</param-name>
<param-value system-property="counters.cache.unit.type">FIXED</param-value>
</init-param>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="counters.cache.size.limit">100</param-value>
</init-param>
</init-params>
</cache-mapping>
<cache-mapping>
<cache-name>RECORDKEYLIST</cache-name>
<scheme-name>example-distributed-with-backup</scheme-name>
<init-params>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="recordkeylist.cache.size.limit">25165824</param-value>
</init-param>
</init-params>
</cache-mapping>
<cache-mapping>
<cache-name>RECORDITEM</cache-name>
<scheme-name>example-distributed-with-backup</scheme-name>
<init-params>
<init-param>
<param-name>cache-size-limit</param-name>
<param-value system-property="recorditem.cache.size.limit">25165824</param-value>
</init-param>
</init-params>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<!--Distributed caching scheme.-->
<distributed-scheme>
<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<thread-count>12</thread-count>
<backup-count>0</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-ref>example-overflow</scheme-ref>
</overflow-scheme>
</backing-map-scheme>
<backup-storage>
<type>scheme</type>
<scheme-name>example-overflow</scheme-name>
</backup-storage>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>example-no-expiry</scheme-name>
<service-name>DistributedCache-no-expiry</service-name>
<thread-count>12</thread-count>
<backup-count>0</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-ref>example-overflow-no-expiry</scheme-ref>
</overflow-scheme>
</backing-map-scheme>
<backup-storage>
<type>scheme</type>
<scheme-name>example-overflow-no-expiry</scheme-name>
</backup-storage>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>example-distributed-with-backup</scheme-name>
<service-name>DistributedCache-with-backup</service-name>
<thread-count>12</thread-count>
<backup-count>1</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-ref>example-overflow-with-backup</scheme-ref>
</overflow-scheme>
</backing-map-scheme>
<backup-storage>
<type>scheme</type>
<scheme-name>example-overflow-with-backup</scheme-name>
</backup-storage>
<autostart>true</autostart>
</distributed-scheme>
<!--
Backing map scheme definition used by all the caches that require
size limitation and/or expiry eviction policies.
-->
<local-scheme>
<scheme-name>example-backing-map</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>{cache-unit-type BINARY}</unit-calculator>
<high-units>{cache-size-limit 10}</high-units>
<expiry-delay>2h</expiry-delay>
<flush-delay>5m</flush-delay>
<cachestore-scheme></cachestore-scheme>
</local-scheme>
<local-scheme>
<scheme-name>example-backing-map-no-expiry</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<expiry-delay>0</expiry-delay> <!--A value of zero implies no expiry. -->
<cachestore-scheme></cachestore-scheme>
</local-scheme>
<local-scheme>
<scheme-name>example-backing-map-with-delay</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>{cache-unit-type BINARY}</unit-calculator>
<high-units>{cache-size-limit 10}</high-units>
<expiry-delay>24h</expiry-delay>
<flush-delay>5m</flush-delay>
<cachestore-scheme></cachestore-scheme>
</local-scheme>
<!--
Overflow caching scheme with example eviction local cache in the
front-tier and the example LH-based cache in the back-tier.
-->
<overflow-scheme>
<scheme-name>example-overflow</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-backing-map</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>example-lh</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
<overflow-scheme>
<scheme-name>example-overflow-no-expiry</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-backing-map-no-expiry</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>example-lh</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
<overflow-scheme>
<scheme-name>example-overflow-with-backup</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-backing-map-with-delay</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<scheme-ref>example-lh</scheme-ref>
</external-scheme>
</back-scheme>
</overflow-scheme>
<!--External caching scheme using LH.-->
<external-scheme>
<scheme-name>example-lh</scheme-name>
<lh-file-manager>
<directory>/local/home/beuser/cachestore</directory>
</lh-file-manager>
</external-scheme>
</caching-schemes>
</cache-config> -
Error - End of file communication
I am getting the above error when i execute the following query.and the connection is geting dropped.Plz suggest a solution for the same.
SUBSTR(ADDUIDTIME,1,14)=20070604161259
for your reference
SELECT *
FROM PE_DIS_AWB_DTL@ITABILL2ITAPRODT
WHERE
SUBSTR(ADDUIDTIME,1,2)='20'
AND (
TO_DATE(SUBSTR(ADDUIDTIME,1,14),'YYYYMMDDHH24MISS') > (SELECT LASTADDUIDTIME FROM PE.BILL_LASTADDUIDTIME WHERE SRNO=4)
AND TO_DATE(SUBSTR(ADDUIDTIME,1,14),'YYYYMMDDHH24MISS') = TO_DATE(sysdate,'YYYYMMDDHH24MISS')
)Ok. now, i'm modifying it with some further enhancement - pls let me know this feedback -
SELECT *
FROM PE_DIS_AWB_DTL@ITABILL2ITAPRODT
WHERE SUBSTR(ADDUIDTIME,1,2)='20'
AND (TO_DATE(SUBSTR(ADDUIDTIME,1,14),'YYYYMMDDHH24MISS') > (
SELECT TO_DATE(LASTADDUIDTIME,'YYYYMMDDHH24MISS')
FROM PE.BILL_LASTADDUIDTIME
WHERE SRNO=4
AND TO_DATE(SUBSTR(ADDUIDTIME,1,14),'YYYYMMDDHH24MISS') = TO_DATE(sysdate,'YYYYMMDDHH24MISS')Regards.
Satyaki De. -
Keep Getting Annoying Image/File Upload Error Please Help!
I keep getting this error message - can't upload image X.png, it seems to happen with several different image - then I try to resume/retry wait some time; sometimes it works and sometimes it doesn't, getting kind of frustrating. Please help!
http://chefagogo.businesscatalyst.com/Hi
Are you still facing the same issue ?
It can be due to few reasons such as connectivity issues or if any update to your site is done at the same time from BC end.
If still you are facing same error, please let me know.
Thanks,
Sanjit
Maybe you are looking for
-
my ipad has stopped letting me see the wi-fi selection it is dull- not highlighted so it will not let me touch to select- therefore it will not go to internet ??? any ideas please !??
-
BPC 5.1 MS to BPC 7.5 NW Migration
Hi All, We have a Client requirement to Migrate their existing BPC 5.1 system to BPC 7.5 NW system. can you please let me know what are the Timelines for BPC 5.1 MS Migration to BPC 7.5 NW using 1) SAP BPC Migration Utility Tool
-
I get a please wait message that sez
pdf viewer cannpt display the page I have downloaded latst version. still can't open doc. opens other docs
-
Home button does not respond many times
From awhile the home button doesn't work properly. I have reinstall the iphone, upgrade to the latest version and It doesnt get fixed. Suddenly you have to pres 10 times to make it works. Some times it work fine but some times it doesn't. Can som
-
Hi Experts, Can someone give a scenario that using RSO2 in BW not in R/3? Thanks, Bill