Getting Entry Point Not Found when trying to open Premiere CS5.

This program was coming up when first installed.  I checked the forum and the last discussion was in 2010 and I have uninstalled the creative suite production premium and re-installed.  I need help asap because I have an editing job to start.  Please help...

Before re-installing did you run the Cleaner tool ?
http://www.adobe.com/support/contact/cscleanertool.html
Maybe something was missed when you un-installed it.
GLenn

Similar Messages

  • I was stupid enough to try to update my iTunes, now I'm getting Entry Point not found error:

    I was stupid enough to try to update my iTunes, I have troubles every single time i've tried to do this.  In the past I've been able to fix it using the support forum, not this time.  So now I'm getting Entry Point not found error:
    The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
    I've uninstalled, and reinstalled MULTIPLE times. Removed all apple related components,  ran as administrator, repaier .net frame etc etc etc....
    Still get this error when opening itunes. And after I close that error, I receive Error 7 - itunes was not installed correctly....please reinstall.
    WHY is this ALWAYS such a pain?  Andriod phone here I come...

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • Error message Apple Sync Notifire exe-Entry Point Not Found when turning on my pc

    I get an Error Mesage when turning on my PC   Apple Sync Notifier exe-Entry point not found. The procedure entry point xmltextreadername could not be located in the dynamic link library libml2.dll. The happened after I connected and sync my IPad.

    Try removing iTunes & all of its components, as described here, then reinstalling:
    http://support.apple.com/kb/HT1925

  • Thunbird won't open after update, I get Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll

    Thunderbird has just failed after an update. It doesn't open. I get the following message:
    Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
    Any help on what I can do to deal with this?
    Many thanks,
    Chris

    ''AscotAles [[#question-1037793|said]]''
    <blockquote>
    Thunderbird has just failed after an update. It doesn't open. I get the following message:
    Entry point not found cubeb_get_min_latency could not be located in gkmedias.dll
    Any help on what I can do to deal with this?
    Many thanks,
    Chris
    </blockquote>
    Thanks Finitarry, that's solved it & all my emails are still there. Excellent!

  • Lookout 6.0.1.: Class Not Found when trying to open project on another PC

    I am using the same version on both PC's, but when I move the file over and run it, I get "Class not found!". Then "Error running process file".When running the lookout source file I get the following:
    Lookout Process File Compiler Version 6.0.1 (build 1)
    Copyright National Instruments 1992-2004  All rights reserved.
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(324): error: Class not found: DirectLogic
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(667): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(670): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(673): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(676): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(1977): error: Class not found: Meter
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(57): error: Object is not defined: DL1
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(667): error: Object is not defined: Meter1
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(670): error: Object is not defined: Meter2
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(673): error: Object is not defined: Meter3
    C:\Documents and Settings\testing\Desktop\Latest Lookout\lprocess2.lks(676): error: Object is not defined: Meter4
    I have also tried to open on 6.1 with similar results.
    I am familiar with lookout, however I have taken this project over so I am not sure what I need to do from here.

    There are two object (DirectLogic and Meter) that are not present on the amchine you are moving the process to.   If the same version of Lookout, you might be able to just copy the cbx files.
    Mike
    Mike Crabtree - Lead Developer
    Destek of Nevada, Inc. / Digital Telemetry Systems, Inc.
    (866) 964-6948 / (760) 247-9512

  • "Error -2147352573 occured at Member not found" when trying to open an excel template

    I'm trying to open an excel document as a template using the report generation tools but coming up with this error.  I've traced the error to NI_ReportGenerationToolkit.lvlib:Excel_Open_Workbook.vi but have to idea why it's happening.  The document seems to be fine as I can open and edit it in Excel.  Has anyone else seen this?  I'm using Labview 8.6 and Excel 2000.  I've attached an image of the error and it's source.  Thanks.
    Attachments:
    Excel open error.doc ‏558 KB

    Hi Mike,
    Thanks for pointing out the compatibility issue. I got the error with version 1.1.3 and therefore upgraded to 1.1.4 - after taking a glance at the readme document. I guess that I was mistaking the supported OS version ("Windows Vista/XP/2000") with the supported version of MS Office ("2007/2003/XP").
    I originally received the error when running an executable on a Office 2000 machine. The executable was built on a Office 2003 machine since I have previously been able to build on Office 2003 and run on 2000. I'm not sure what was different with this executable. Anyway, after installing the LV development system on the Office 2000 machine, the issue turned out to be that some ActiveX methods had been disconnected. All I had to do was re-point the Invoke Nodes to the appropriate ActiveX methods.
    Please note that my application in this case is very simple and therefore only exposes a small part of the Office 2000 ActiveX API. I'm sure that I would run into a non-compatibility wall if I were to implement more Office 2000 functions with RGT 1.1.4.
    Message Edited by Philip Courtois on 06-18-2009 01:26 PM
    - Philip Courtois, Thinkbot Solutions

  • Apple Application Support not found when trying to open iTunes

    iTunes not opening. Error 2 message keeps popping up saying that Apple Application Support is not found. (Dont' know where it went!!!) It's asking me to uninstall and reinstall iTunes. B4 I do, will I lose my library and have to start over?

    downloaded winrar and extracted that bfile, haha answered my own question,

  • HT1923 entry point not found error message

    Just download new itunes  and keep getting entry point not found error  message

    HI!
    I TOO AM HAVING THIS PROBLEM... I WOULD LOVE FOR SOMEONE TO SEND ME A SOLUTION TO IT. I GET THE NOTICE WHEN MY CONPUTER BOOTS UP! [email protected]
    Hello!
    I hope someone can help me. when I try to burn a playlist or CD from iTunes (using windows vista) i receive this error message about half way through the disc burn "The attempt to burn a disc failed. An unknown error occurred (4450)" and burn cancels. On start up I receive this error message: " Itunes helper.exe - Entry Point not found. The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll"
    How do I fix this? and is the reason why I cannot burn CDs?
    Thanks!
    Message was edited by: CEDARMOM52

  • When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message.  I also get an error message when trying to sync with iTunes that a backup session cannot be started.  How do I fix this?

    In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
    It says:  "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
    I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
    "iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
    The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process. 
    Any advice????

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • When trying to use MobileMe I am getting an error message: AppleSyncPref.exe - Entry Point not found  Can you help?

    When trying to use MobileMe I am getting an error messgae: AppleSyncPref.exe - Entry Point not found  Can anyone assist?

    MobileMe no longer exists...that system was discontinued and merged into iCloud.
    Your old MobileMe email addresses shoule still be valid, or convert into some form of user@ me .com or icloud . com.

  • When I turn on my computer I get the message APPLESyncNotifer.exe   Entry Point not found.

    Have a 5th generation nano and when I connect to my computer I get a message APPLESyncNotifer.exe  Entry Point Not Found. Not a computer geek so I am stumped. Anyone out there who could help? I have reinstalled ITunes and restarted my computer to not avail.

    Copying & pasting SQLIte3.dll worked out well for your computer?
    Just read your trouble with your iPod nano 5th generation & Windows PC, how about trying the one I found on this community before?
    Click the start button and type in 'msconfig' in search, and, in system structure utitily, click on the tab of 'startup' and check off the box of 'AppleSyncnotifier.exe' and reboost your system.(You have to follow down till the end of the place of the file.) That'll solve your trouble.
    I don't know you connect iPad or iPhone at all, that may change the solution? Hoping this suggestion also work out for you & your PC.

  • When I connect my new ipod nano to my laptop (using windows)I get an error message saying "itunes.exe - entry point not found" I cannot access my itunes , or download a new version. Any ideas what to do or what is causing this?

    I have been given a new ipod nano to replace my much loved but old ipod. When I plug it into my laptop to sync it I get an error message stating "itunes.exe - entry point not found. The procedure entry point AVCFAAssetCreateWithByteStreanAndOptions could not be located in the dynamic link library
    AVFoundationCF.dll" I cannot acces my itunes or download a new versiona as this keeps flashing up. Any ideas? Please help, my life is meaningless without my music!!

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • HT1349 When my computer comes up, I always get this error message.  AppleSyncNotifier.exe entry point not found. SqLite3_wal_CheckPoint could not be located in the dynamic link library SQLite..dll.  What should I do?

    When I start up my PC I get the following message.  Apple Sync Notifier.exe entry point not found. Sqlite3_wal_checkpoint could not be locatedin the dynamic link library SQLite3.dll.  What do I need to do to correct this?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • When I turn on my PC, I get the message "Apple Sync Notifier.exe-entry point not found.  Then I cannot update my apps.  what to do?

    When I turn on my PC computer I get a small window pop-up that says "Apple Sync Notifier.exe-Entry Point Not found"  This message will not allow me to update my I-phone apps.  What can I do to remedy the problem??

    Try removing iTunes & all of its components, as described here, then reinstalling:
    http://support.apple.com/kb/HT1925

  • When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    Any answers how to fix it? All Im getting is error for the past 3 days!

Maybe you are looking for

  • IPhone 6 - people can't hear me; garbled; breaking up

    Has anyone else had problems with the iPhone 6, where people on the other end can't hear you?  They say I'm garbled and breaking up.  I can hear them fine.  Love everything about the iPhone 6 EXCEPT using it as a PHONE!!!

  • SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

    com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets in the production server..... while testing the jco maintained for Ess applications. if i go for uidpw method for modeldata destination i am

  • Light table View error

    when i swith from navigator view to lighttable view I get a error message that flashes causing the screen to flicker. I can only get out force quitting. any ideas on the error? i'm getting on a few different presentations. I'm on Keynote 5.1 with OS

  • HELP!!!!! I am so angry BT!!

    Sorry but I am really at my wits end with you BT!  My father has lost his PIN number and can't remove his call barring service and can't make any outgoing calls. I reported this for him two weeks ago - he's 84 and hard of hearing, so couldn't make th

  • Lsmw through idocs

    hi friends,          I'm new to IDOCS but Yesterday i tried lsmw through idoc method by following an E-book.The problem is that I got the idocs generated and posted (i.e upto 14 steps were successfull in lsmw) but when i checked the table the data wa