Getting EOP to send mail to On premises Exchange 2013

one of may clients has Office 365 Enterprise E1 for Nonprofits and on premise exchange 2013 server which I'm trying to implement the EOP service.
but i cannot get the exchange online outbound connector to forward on the emails to the on premise server.
i have active directory sync working.
i.e when i add a new user on premises it creates it online.
could anybody let me know how to get this service to work.
what i would like is
1 mx record to point to eop service and collect and filter email.
(which i have done by adding mx records as per dns instructions. checks show as fine.but changed back to on premises server because emails where only staying in online inbox. the on premises domain name has been setup within office 365 as default domain and
in accepted domains within exchange online.both exchange online and on premises default domain name our the same.)
2 filter mail to be forwarded to correct mail box to on premises server.
( which i have setup outbound connector with exchange online to point to our on premises exchange server but does not receive any emails they are received in office 365 online mailbox and not forwarded on)
3 on premises server to forward mail to EOP service
( which i have done by creating inbound connector in exchange online and adding it as smart host to on premises outbound connector and appears to be working fine.)
am i missing something?
any help would be gratefully appreciated
Many Thanks
Stephen
1 first server (AD,AD CS,DC,Dhcp,dns servers and Hyper V)
setup physical server with windows server 2012 r2 standard Essentials Experience Role installed and hyper v role
2nd server server (exchange 2013)
VM with windows server 2012 r2 with exchange server 2013 installed and all updates done including exchange cu1 update.

Matthew thank you your reply but No it is set for Authoritative. would this be the problem.
many thanks
Stephen

Similar Messages

  • Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

    Hi All,
    We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
    There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
    The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
    The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
    A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
    It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
    We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
    iPhone 3Gs    IOS 3.1.3
    iPhone 3Gs    IOS 4.3.3
    iPhone 4       IOS 4.3.3
    iPhone 4       IOS 4.3.5
    I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
    Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
    The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
    it must be something misconfigured in this Exchange server right?
    We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
    Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
    Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
    It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
    Does anyone have some insight into what the problem may be?

    Further to this .. I found the solution on a MS Exchange 2010 support forum.
    It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
    Org Config – Hub Transport cannot have any spaces in the name field.
    I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
    restarting the Exchange and IIS services emails were now being sent and received ok.
     Check
    out :
    http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
     This
    is good one to add to your knowledge bank in case you come across it in the future.
    Rgds Gerry

  • Migrate Office 365 To On-Premise Exchange 2013

    hello
    My client attempts to migrate the mailboxes hosted from Office 365 to Exchange 2013 on-premise hosted in the client's company.
    However, despite all attempts , it appears that no procedure works correctly. All's time , something wrong appears Inside the process.
    Indeed, on Office 365 we don't see the servers in our on-premise exchange 2013.
    the Exchange Hybrid are set correctly and to exchange 2013 migration attempts to run Office 365. (MRS proxy select)
    All servers are in the same Update. My client can't update with the last CU6 all server and want to stay with the CU3
    Thanks for your read and for your help
    Best regard
    Alexis

    Bonjour,
    J'ai deja réalisé ce type de mission, si celle-ci est tout à fait possible en utilisant uniquement les outils intégrés à Exchange, elle nécessite beaucoup de préparation, notament en terme d'AD, et selon la configuration dans laquelle vous êtes, peut etre
    *non* transparente pour vos utilisateurs.
    " My client can't update with the last CU6 all server and want to stay with the CU3"
    C'est par contre un point plus que géneant, le CU3 n'est plus supporté par MS, la compatibilité avec O365 n'est donc pas garantie.
    Si vous souhaitez un echange plus sérieux sur ce sujet, vous pouvez me contacter.
    Bruce Jourdain de Coutance - Consultant MVP Exchange http://blog.brucejdc.fr

  • HT1766 I just restored my old iphone data to my new phone. When I tried to send an email, it kept asking me for my email password. I couldn't remember it and kept trying over and over. Now email wont send and I keep getting a Cannot Send Mail:

    I restored my phone data onto my new phone. When I tried to send email it asked me for my email password, which I couldn't remember. Now I keep getting an error message whenever I try to send an email. How do I reset this so it works?

    Until you can enter that password it kept asking for, you won't be able to send mail. You need to go to Settings>Mail, Contacts, Calendars>Email Account you are referring to>SMTP server, and make changes there. If you cannot remember your email password, you will have to get in touch with your provider to be able to change it.

  • Getting message cannot send mail check server setting

    Trying to get email to send out, but getting a message saying cannot send...check outgoing server setting...
    Anybody???
    Penni

    Do you have any other mail accounts on your iPad? If so you can select another server from the options.
    Go to settings again and select Mail, Contacts, Calendars. Then select your mail account from the window on the right side. Then tap on the email address of the account to open the next window that shows the account information. Then there should be heading titled Outgoing Mail Server. You can tap the arrow to the right of the server name in that field to get to the next window that shows other servers. Try to select one from there and see if that works.
    I keep forgetting about this as well. It has provided help to others.
    http://mail.google.com/support/bin/answer.py?answer=77702
    Message was edited by: Demo

  • HT5058 I can't send mail on my iCloud exchange

    I use to send my email then all of a sudden I cant send mail, I am new to apple

    "icloud exchange" - this seems a contradiction.  There's icloud email and there's Exchange email.  Describe your problem with more detail.

  • Get User Names and Mail Ids present in Exchange Server

    Hello All,
    Can we get all the names and mail ids present in the exchange Server global address book?
    I tried one example but it is giving error.
    Exception in thread "main" javax.naming.CommunicationException: [LDAP: error
                code 2 - Protocol Error]; remaining name 's=satheesh'
    Code is given below:
    Hashtable env = new Hashtable(11);
    env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL, "ldap://mailserver:389");
    DirContext ctx = new InitialDirContext(env);
    Attributes answer = ctx.getAttributes("s=satheesh");
    Any example code to get user names and mail ids will be helpful.
    Thanks in advance.
    Regards,
    Satheesh A
    [email protected]

    Hi Satheesh,
    I am new to LDAP. I am facing the exact same problem as you mentioned. Did you solve your problem?
    Thanks for any help you can provide.
    Hello All,
    Can we get all the names and mail ids present in the
    exchange Server global address book?
    I tried one example but it is giving error.
    Exception in thread "main"
    read "main" javax.naming.CommunicationException:
    [LDAP: error
    code 2 - Protocol Error]; remaining name
    aining name 's=satheesh'
    Code is given below:
    Hashtable env = new Hashtable(11);
    env.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.ldap.LdapCtxFactory");
    env.put(Context.PROVIDER_URL,
    "ldap://mailserver:389");
    DirContext ctx = new InitialDirContext(env);
    Attributes answer = ctx.getAttributes("s=satheesh");
    Any example code to get user names and mail ids will
    be helpful.
    Thanks in advance.
    Regards,
    Satheesh A
    [email protected]

  • How to get a summarized mail traffic report in exchange 2013

    Hi all
    How to calculate the exchange 2013 SMTP mail traffic in terms of hour,day,month,top senders,largest message and top recipients list . Same time we would like to have those summarized mail traffic report for all the mailbox servers in the form of graphical
    view as well as in a csv file  ?
    Please all of us share your thoughts and possibilities .
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

    You may calculate hourly email traffic using "Message Tracking Logs and Log Parser".
    I would like to refer you on this well explained article that will assist you step-wise to implement in your working environment : http://exchangeserverpro.com/calculate-hourly-email-traffic-using-message-tracking-log-parser/
    Moreover, if you wish to achieve this goal automatically, you may also consider on this automated application (http://www.exchangereports.net/) that provides a deep-view of email traffic report in real time at
    granular level.

  • Setting up Push Notification from on premise exchange 2013

    We have been trying to get push notifications to work with the OWA for IPhone/Ipad app using the information provided in the below TechNet article. We have an exchange 2013 on premise installation and going by the info in the article, are attempting to create
    a relationship with the office 365 servers. We already have our domain configured in office 365. When we attempt to create the New-Authserver, we receive the following error.
    New-AuthServer MicrosoftSts -AuthMetadataUrl https://accounts.accesscontrol.windows.net/metadata/json/1/?realm=DOMIAN
    Cannot acquire auth metadata document from 'https://accounts.accesscontrol.windows.net/metadata/json/1/?realm=DOMAIN.
    Error: An exception occurred during a WebClient request..
        + CategoryInfo          : ResourceUnavailable: (:) [New-AuthServer], AuthMetadataClientException
        + FullyQualifiedErrorId : [Server=MAIL SERVER,RequestId=9dd5e9ff-71cc-455f-9efb-5bb98c2d1f83,TimeStamp=5/13/2014 9:1
       3:13 PM] [FailureCategory=Cmdlet-AuthMetadataClientException] DEDA18E3,Microsoft.Exchange.Management.SystemConfigu
      rationTasks.NewAuthServer
        + PSComputerName        : CAS server
    http://technet.microsoft.com/en-us/library/dn511017(v=exchg.150).aspx
    The Oauth certificate was successfully created and exported to the various mail servers. Does anyone have any ideas and what the issue could be?
    Thank
    Jorge

    you may find posting in the Lion Server forum to be more helpful.

  • How can I script out automatic mail profile connection to Exchange 2013

    We use a program called Desktop Authority 9.1 that is a fully featured kixstart based logon user profile customization tool.  It does a full gamout of things like map drives, folder redirection, import registry edits, run silent application installers,
    and of course create the Outlook profile.
    There's no issues with this tool creating an outlook profile internally to mail.domain.com, and even detecting laptops and configuring it for outlook anywhere to webm.domain.com and cached mode.
    Issue I'm having is trying to roll out Exchange 2013.  This tool simply does not seem to create the mail profile.  On a test computer I have the hosts file pointed to the new 2013 server from these names: webm, mail, autodiscover.  At log
    on I simply get an error "The name cannot be resolved.  The name cannot be matched to a name in the address list."  When you click OK you get a little confusing dialog box with the exchange server name: mail  and the mailbox: windows
    user ID.
    So I tried to do this manually in the Mail (32-bit) control panel applet.  It doesnt matter if I put in mail, mail.domain.com, webm, webm.domain.com, email (the netbios name of exchange 2013), etc.. I get the same error.  I went into More settings
    > Connection > connect to microsoft exchange using HTTP and in the proxy settings I have webm.domain.com, connect SSL Only, only connect to proxy servers that have the name: msstd:webm.domain.com, and the rest is checked and NTLM Authentication is checked.
    I simply CANNOT manually create an outlook profile at all.  I can surely delete this one, start outlook, click next through the wizard taking all the default options and get Outlook configured that way (via Autodiscover service), but I need a way to
    do it manually so I can have Desktop Authority do it manually.  Why?  Two major reasons:
    1.  If our end users are greeted with an Outlook startup wizard every time they go to a different computer, and have to click next through it, our help desk is going to be overwhelmed with "what is this outlook startup wizzard?" questions.
    2.  Desktop Authority also attaches additional mailboxes.  We need the outlook profile passed through DA's scripting so different users departmental voice mailboxes are attached in their outlook.  IE) Mailbox VM_FAX_Accounting is attached
    to all of the accounting associates Outlook.

    Ok I found another way to get autodiscover to work..
    In Group Policy go to User Configuration > Administrative Templates > Microsoft Office 2010 (and 2013 in my case) > Miscellaneous > Suppress recommended settings dialog > Change to ENABLED.
    Now go to User Configuration > Administrative Templates > Microsoft Outlook 2010 (and 2013 in my case) > Account Settings > Exchange > Automatically configure profile based on Active Directory Primary SMTP address > Change to ENABLED.
    Now for the shared mailboxes,  I guess when we plan to migrate a department, their shared mailbox MUST be migrated from 2007 to 2013 on the same evening, and then we must go into that shared mailbox and ensure each individual user has "Full access
    permissions" to it.
    Now in Desktop Authority we publish this reg file: 
    Windows Registry Editor Version 5.00
    [HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\AutoDiscover\RedirectServers]
    "autodiscover-s.outlook.com"=hex(0):
    "autodiscover.outlook.com"=hex(0):
    "autodiscover.domain.com"=""
    [HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\AutoDiscover\RedirectServers]
    "autodiscover-s.outlook.com"=hex(0):
    "autodiscover.outlook.com"=hex(0):
    "autodiscover.domain.com"=""
    [HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\AutoDiscover\RedirectServers]
    "autodiscover-s.outlook.com"=hex(0):
    "autodiscover.outlook.com"=hex(0):
    "autodiscover.domain.com"=""
    Why that?  Well it turns out further testing when I added full permission to a new 2013 test shared mailbox, yet another nag screen was presented in Outlook which states "Allow this website to configure [email protected] server settings?  autodiscover.domain.com/autodiscover/autodiscover.xml
    - Your account was redirected to this website for settings.  You should only allow settings from sources you know and trust.  (Allow) (Cancel).  If end users see this, you can bet our helpdesk calls will be out of control.  We undergo security
    awareness training and they will question ANYTHING resulting in redirect or dialog boxes asking about trust, and really that's a good thing.
    That registry should I think handle Outlook 2007, 2010, 2013, and we will just have to maintain it for future versions.
    We maybe have, I dont know less than 5 Outlook 2007 installs and they are on spare laptops, so If I want to cover it all I just have to download the Office 2007 ADMX templates for Group Policy so I can change those two settings above as well.
    The other way I thought was to use powershell and script something out to pull from Exchange the GUID, append the @domain.com and put that into a variable that our Desktop Authority application can plug in at startup.  But thats a little too much custom
    programming whereas I think using GPO's and documented registry keys may be a better fit.
    I just have to do testing to figure out what's going to happen to the users profile if it already exists on 2007, then its migrated to 2013.  Will it be deleted?  Will they lose all of their signatures?  I know for many on network
    PC's they will be going from direct mapi connection to Cached mode.  Is that a good thing?  I would imagine less load on the server and network once the mail is downloaded.
    We would plan on a slow migration on a departmental basis.  Luckily our departments have their own user OU's so applying this group policy can be done in the same manor.

  • How to configure users for internal mail routing only in exchange 2013

    Hi Guys!
    I have a scenario here that i have three (3) group of users, one group is able to have an inbound and outbound mail, meaning they can send and recieved emails from internal and external.The second group of users should have inbound mail(local mail) only
    (cannot send and recieved mails from internet), and the third (3) user is they can recieved an outbound mail but they are not allowed to send mail directly to the client,(Ex.
    [email protected],[email protected],[email protected]) instead they will use the
    [email protected] as the reply to the client. Please let me know how to configure group user 2 and 3.
    Thank you.
    regards,
    Paul

    Hi Paul,
    Great advice from Maganti, just elaborating steps:
    Prevent Group 2 send e-mail to internet by transport rule:
    1. Login EAC with administrator, Mail Flow---> Rule, click “Create a new rule, then give a name “Group2 - No Internet Mail”.
    2. Conditions: select "From a member of a distribution list" & select group "Group2"
    3. Select another condition "Sent to users inside or outside the organization" & Select Outside.
    4. Actions: select "send bounce message to sender with enhanced status code" & write your custom message like “You are not authorized to send mails to internet”.
    Prevent Group 3 directly send e-mail to internet, however it can send message as group:
    We also can create a transport rule which is same with Group2, then open Active Directory Users and Computers to add send as permission with another group (contain same users as group3).
    Best Regards,
    Allen Wang

  • Large Mail.que database in Exchange 2013

    [Background]
    Since Exchange 2013 is released, some user may come across the following situations:
    The space of disk C is used up.
    The transport service stops processing messages.
    The Mailbox server is crash.
    In this case, the issue can be resolved with checking with the mail.que file which is in the following path on the Mailbox server:
    C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue
    [Symptom]
    The Mail.que file on all Exchange 2013 servers grows very large and it’s even over 20 GB.
    [Cause]
    It’s a by design behavior.
    Different from the previous Exchange server, Safety Net which has the same function with the Transport dumpster in Exchange 2013 takes up the volume of the mail.que file and
    it’s the feature which is responsible for the large size of the mail.que in Exchange 2013.
     And here is a reference about the feature Safety Net in Exchange 2013:
    http://technet.microsoft.com/en-us/library/jj657495(v=exchg.150).aspx
    [Workarounds]
    1. Allocate large space for the Exchange 2013 installation or increase the volume for Exchange 2013.
    These articles will also provide further detail of size calculating:
    http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
    http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx
    (See section: “Transport storage requirements”)
    2. Moved queue database to another drive by using
    Move-DatabasePath
    3. Reduce the SafetyNetHoldTime and MessageExpirationTimeouton values to one day (default values are 2 days). And these commands can be in use:
    Set-TransportConfig SafetyNetHoldTime 1.00:00:00
    Get-TransportService | Set-TransportService -MessageExpirationTimeout 1.00:00:00
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    [Background]
    Since Exchange 2013 is released, some user may come across the following situations:
    The space of disk C is used up.
    The transport service stops processing messages.
    The Mailbox server is crash.
    In this case, the issue can be resolved with checking with the mail.que file which is in the following path on the Mailbox server:
    C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\data\Queue
    [Symptom]
    The Mail.que file on all Exchange 2013 servers grows very large and it’s even over 20 GB.
    [Cause]
    It’s a by design behavior.
    Different from the previous Exchange server, Safety Net which has the same function with the Transport dumpster in Exchange 2013 takes up the volume of the mail.que file and
    it’s the feature which is responsible for the large size of the mail.que in Exchange 2013.
     And here is a reference about the feature Safety Net in Exchange 2013:
    http://technet.microsoft.com/en-us/library/jj657495(v=exchg.150).aspx
    [Workarounds]
    1. Allocate large space for the Exchange 2013 installation or increase the volume for Exchange 2013.
    These articles will also provide further detail of size calculating:
    http://blogs.technet.com/b/exchange/archive/2013/05/14/released-exchange-2013-server-role-requirements-calculator.aspx
    http://blogs.technet.com/b/exchange/archive/2013/05/06/ask-the-perf-guy-sizing-exchange-2013-deployments.aspx
    (See section: “Transport storage requirements”)
    2. Moved queue database to another drive by using
    Move-DatabasePath
    3. Reduce the SafetyNetHoldTime and MessageExpirationTimeouton values to one day (default values are 2 days). And these commands can be in use:
    Set-TransportConfig SafetyNetHoldTime 1.00:00:00
    Get-TransportService | Set-TransportService -MessageExpirationTimeout 1.00:00:00
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.
    You cant move the queue database with move-databasepath. You have to follow this method:
    http://technet.microsoft.com/en-us/library/bb125177(v=exchg.150).aspx
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • 2012 r2 Essentials on premises Exchange 2013 integration failing

    I have a new server in my development environment that I have installed Essentials and Exchange 2013 on with all of the latest updates. After getting Exchange 2013 installed I am unable to successfully run the Exchange Integration wizard. It fails saying
    that it can't contact the exchange server.
    I am able to access the Exchange Powershell, Exchange Admin center and OWA.
    The Essentials Anywere Access has been setup and Is working as well.
    any suggestions on where to go from here?

    Hi,
    -->It fails saying that it can't contact the exchange server.
    Can you ping the exchange server via server name and IP address? In addition, did you apply
    Cumulative Update 5 for Exchange Server 2013 and reboot the Exchange server, then monitor the result? Just a confirmation, thanks for your understanding.
    Please also refer to following article and check if can help you.
    Integrate an On-Premises Exchange Server with Windows Server Essentials
    In addition, if this issue still exists, please follow the path:
    %programdata%\Microsoft\Windows Server\Logs and check log files if find more clues.
    Windows Server Essentials 2012/2012 R2 Log Files
    If any update, please feel free to let me know,
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Cisco IronPort with On Premise Exchange 2013

    Hello All
    The company I work for is in the process of starting an on premise Exchange 2007 to Exchange 2013 migration.
    Most of the issues I don't think I'll have an issue with; however, where I am not finding much info is in regards to other companies using Cisco IronPort with Exchange 2013.
    SO, I have two questions within this topic...
    One, is anyone using Cisco IronPort with Exchange 2013 (on premise) out here?
    Two, my manager is very controlling.  I am the Exchange Admin; however, anything having to do with this IronPort thing with regards to Exchange HE has to do it. So, if anyone is familiar with this IronPort thing... How much work on the IronPort is going
    to have to be done during this migration to keep things going?

    It shouldn't be any different with Exchange 2013 than it is with Exchange 2007.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • OWA receives mail long before Outlook (Exchange 2013 with Outlook 2010 and 2013)

    I recently upgraded my Exchange environment to Exchange 2013 SP1. The Outlook users are now experiencing a delay when receiving email. When they do arrive they appear in batches, often 20-45 minutes after they were sent, from a mailbox on the same server.
    Additionally, the mail appears instantly when you monitor the inbox using OWA. The users are experiencing this on both Outlook 2010 and 2013 clients configured in both cached and non-cached modes. This appears to be a problem with Outlook connecting to Exchange.
    Any suggestion about how to correct this would be greatly appreciated. Thanks!

    Hi,
    From your description, when users use OWA, they can receive emails normally. But if they use Outlook 2010 or Outlook 2013, there is a delay in receiving emails.
    I recommend you use the Outlook safe mode to determine whether the problem is caused by add-ins. Also, please make sure users have installed the Outlook latest Service Pack.
    If the issue persist, please create a new profile and check the result.
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

Maybe you are looking for