Getting error 0x80248008 updating from build 9860 to 9879

I have build 9860, and I'm trying to update to the newer build:
In the Preview Builds UI, I click Install now
Within about 5 seconds it fails and displays the message "Failed to install the new preview build, please try again later. 0x80248008" (screenshot below).
Rebooting doesn't help. Any suggestion about what to try to fix this?
thanks!
David

Assuming that you have all windows updates installed.....
Would you care to do a clean install by downloading build 9879 Enterprise ISO, burn it to a bootable DVD or Flash Drive and then install ? Enterprise version has everything in a non- enterprise version plus a few extra features geared towards business
people. You don't have to use them at all.
I am using it now ...... in my home computer.
If that is acceptable, here are the links :
Windows 10 Enterprise build 9879 64-bit
ISO image
Windows 10 Enterprise build 9879 32-bit
ISO image

Similar Messages

  • Update from build 9860 to 9879 breaks permissions

    After windows 10 applied the update from Build 9860 to 9879, I have experienced a host of problems that appear to be due to broken filesystem permissions caused by the update process itself -:
    # Onedrive keeps crashing when asking to configure itself
    # Modern UI apps all fail to load with the "application does not support the contract specified" or stating Windows cannot find ""
    Trying to fix the filesystem permissions also seems to make things worse -:
    # You cannot change/modify permissions at all on C:\Program Files
    # Trying to restore the C:\Users permissions as suggested in a Miscrosoft document to fix Modern UI apps causes even more permission problems, such as Internet explorer not functioning. I have had to give my user account explicit full control on the
    folder to even be able to use the PC at all.
     It would be good if Microsoft could provide a "FixIt" to correctly set the permissions on these locations, but more importantly fixed the update process to not break them in the first place.

    I did a reinstall which was working OK - until I installed the visual studio c++ runtime(s). I have installed the 2008, 2010, 2012 and 2013 ones but am unsure which has caused this breakage but am now getting the same contract messages and am
    unable to launch any metro apps again?

  • I keep getting errors when updating from the Creative Cloud (49)

    I keep getting errors when updating from the Creative Cloud (49).
    " Update Failed" and when I click on Learn More. The error messages says there is a download error with (49)  I am signed on as administrator, so that shouldn't be a problem. I have Windows 7.

    Error 49 https://forums.adobe.com/thread/1491394
    -and https://forums.adobe.com/thread/1353632
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Windows 10 fails to update from build 9860

    Could it be that these devices prevent an update of W10? Reports from $Windows.~BT\Sources\Panther\setuperr.log
    2015-02-12 18:13:12, Error                 CONX   Found wireless device Intel(R) Dual Band Wireless-AC 7260 [pci\ven_8086&dev_08b2&subsys_c2708086&rev_83]
    2015-02-12 18:13:31, Error                 CONX   Unable to get message handle 80092009 c:\windows\system32\drivers\ax88179_178a.sys
    2015-02-12 18:13:34, Error                 CONX   Unable to get message handle 80092009 c:\windows\system32\drivers\lenovodock.sys
    2015-02-12 18:13:36, Error                 CONX   Failed to open INF file [tib_mounter.x64.inf] with 0x80070002
    2015-02-12 18:13:36, Error                 CONX   Failed to initialize driver package [tib_mounter.x64.inf]
    2015-02-12 18:13:37, Error                 CONX   Failed to open INF file [tib_mounter.x64.inf] with 0x80070002
    2015-02-12 18:13:37, Error                 CONX   Failed to initialize driver package [tib_mounter.x64.inf]
    2015-02-12 18:15:11, Error                 MOUPG  Invalid UI subphase [0]. Progress phase arrays must be updated.
    2015-02-12 18:15:21, Error                 SP     SPGetWinReImagePath: Error calling WinReGetConfig. Error: 0x00000003

    Hi theking2,
    There seems to be a little problem between Windows setup Wizard and the device driver's communication.
    You may check at the lenovo official website and see if they could offer any further assistance.
    Besides, how you installed the drivers?
    For the current situation, you may take a try to refresh the current build using the downloaded ISO file, or try a clean install of Windows 10 9926 build.
    Best regards
    Michael Shao
    TechNet Community Support

  • Error when updating from Build 10041 to Build 10049 Error 0x80070012

    I've tried using powershell to fix mail but it comes up with
    Get-appxprovisionedpackage : DismInitialize failed. Error code = 0x80070012
    At line:1 char:1
    + Get-appxprovisionedpackage –online | where-object {$_.packagename –li ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Get-AppxProvisionedPackage], COMException
        + FullyQualifiedErrorId : Microsoft.Dism.Commands.GetAppxProvisionedPackageCommand
    Then when I try to install mail, calender, and people 
    "Something happened and your purchase can't be completed. Error code : 0x80073cff

    I get this error when inputing 
    Get-appxprovisionedpackage –online | where-object {$_.packagename –like “*windowscommunicationsapps*”} | remove-appxprovisionedpackage –online
    Get-appxprovisionedpackage : DismInitialize failed. Error code = 0x80070012
    At line:1 char:1
    + Get-appxprovisionedpackage –online | where-object {$_.packagename –li ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [Get-AppxProvisionedPackage],
    COMException
        + FullyQualifiedErrorId : Microsoft.Dism.Commands.GetAppxProvisionedPackageCommand

  • I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

    I was updated my Iphone 4s from computer(ITunes).ITunes get error and update failed.(When Iphone is preparing.).And now ı can't use my IPhone.At the screen there is a USB cable and up of the screen there is ITunes' logo.PLEASE HELP!

    Read what i say. Put iPhone in DFU mode. Connect with USB cable and restore.
    Read:
    http://www.apple.com/support/iphone/assistant/restore/

  • Getting Error while updating   Vendor Challan

    Dear Guru,
                     my client want to use  Extended withholidng Tax . i v configured totaly according to indian TDS configuration. i m getting error while updating the vendor challan.
                 No unpaid tax lines exist for the given selection criteria.
    Message no. 8I702
    Diagnosis
    The corresponding withholding tax line  &1& is not present in WITH_ITEM table.
    System Response
    For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
    Procedure
    check entries in table WITH_ITEM for the open tax items chosen for clearing.
        Business Place and section code updating properly in table.....
    Thanks & Advance
    Laxmi Narayan

    Dear Laxmi Narayan,
    This error would occur, if you miss Business Area/Section Code at the time of Invoice.
    The following thread should answer your query:
    Extended W/H Tax
    Regards,
    Naveen.

  • TS3694 I get error while updating my I-phones its shows 3004

    I get error while updateing my I-phone and its give number as 3004..
    Girish

    We dont know yet if he is doing it from the phone itself!
    If you do from the phone try from iTunes and vice versa.

  • Error after upgrade to build 9860

    After updating to build 9860
    account appears on the home screen ( in the Welcome window )
    double image of the user.
    thanks

    Hi alpha45,
    Similar issue has been discussed in forums for many times.
    After the upgrade, users may encounter two logon picture, or there is no logon screen, no place to enter the password. Sometimes
    switch user could bring the logon screen back, usually folks do a PC refresh, which would get the logon screen to work normally.
    Please take a try to switch user or Refresh the PC, and then check if issue insists.
    Besides, take use of Windows feedback tool to report this issue.
    Best regards
    Michael Shao
    TechNet Community Support

  • HT4623 i am stuck with error 3014 updating from 6.1.1 to 6.1.2,any solutions ?

    I am stuck with error 3014 updating from 6.1.1 to 6.1.2,any solutions ?

    Try hooking up to computer and doing a full restore. Or, u could put it in dfu mode and then do the full restore from iTunes.

  • Will the iPod nano 7 get a new update from the current 1.0.3?

    Hey Guys I was wondering will the iPod nano 7 get a new update from the current 1.0.3?
    If anyone knows or has and info or rumors pleas tell me.
    Thanks
    email *****
    <edited by host>

    Apple might release small updates for 4th generation iPods touch if they find serious issues like the FaceTime problem that made Apple release iOS 6.1.5 for the 4th generation iPod touch. However, this device won't receive any major iOS update.
    The 4th generation iPod touch has got 256 MB of memory, and iOS 7 devices have got 512 MB or more of memory

  • How the client machine could to get the combo update from SUS?

    Hi everybody!
    How the client machine could to get the combo update from SUS? My SUS working for clients comp and showing the Mac OS X 10.6.5 Update - not Combo Update (Combo Update downloaded also and I can see it in Server Admin)! But I would like to install the Combo Update - is it possible? How I can get the Combo Update if it is not shown in the list?
    Thank you in advance!

    You can download the Combo manually from Apple.
    http://support.apple.com/kb/DL1324
    http://support.apple.com/downloads/DL1324/en_US/MacOSXUpdCombo10.6.5.dmg

  • Getting error when updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1

    Hi,
    I`m getting error message like "None of the apps in your project can be activated in the target. The manifest file of one or more apps contain API sets or Office applications that are not supported by
    the target Office client. To debug those apps, update manifest files to exclude any unsupported API sets or Office applications, and then start the project again. Alternatively, you can debug your apps by using Office 365 as a target." when when
    updating the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1 in manifest file though i have added host elements.
    any help in this regard is highly appreciated
    Thanks,
    Santosh Sutar  

    Hi Satosh Sutar,
    Based on the description, you got the error message when you update the apps from version 1.0 to 1.1.
    From the error message, it seems the menifest include some settings no allowed in the new version. Would you mind sharing more detail about how you update the project?
    And here is an article about updating apps for Office and menifest schema files in the project for your reference:
    How to: Update the JavaScript API for Office and manifest schema files in your Visual Studio project from version 1.0 to 1.1
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • On starting FF, get error 'the update cld nt be installed.Make sure no other copies running' even from cold. Have reset but still persists.

    On starting Firefox (Windows 7), even from a cold boot I get a dialogue box with the message 'The update could not be installed. Please make sure there are no other copies of Firefox running on your computer and then restart Firefox to try again'
    I have checked task manager and there are no other copies.
    I have downloaded the latest version 29 Firefox but the error persists.
    I have reset Firefox to default state but the error still persists.
    Help please!

    There are a few old methods for troubleshooting this but no longer maintained:
    [https://support.mozilla.org/en-US/kb/update-failed-error-message-when-updating]
    Sometimes there are other programs that might be preventing the update, as well as a need for a clean reinstall. However it is odd that this has happened two versions in a row. Does your firewall or antivirus allow updates to Firefox? [http://kb.mozillazine.org/Firewalls]
    If you restart the computer does the error message still happen when you try to update from the About Firefox page?
    A manual installation can always be done [https://support.mozilla.org/en-US/kb/how-download-and-install-firefox-windows]

  • Error when updating from FM 8.0p266

    Hi,
    I can't seem to get patches for FrameMaker 8 to be installed.
    I have not been working in FrameMaker for a couple of months, but now I will start doing some changes for my templates and would like to use the latest version on FrameMaker.
    I have version 8.0p266.
    When trying to use Updates from the menu I get an error.
    I get the same error when going to Adobes pages and try to bring down patches directly from there.
    The error I get is:
    You do not have correct version of FM install on your system. This patch installer will work only with Version 8b266 build.
    Patch installer will quit now.
    I have tried the patch 8p273.
    What can I do?
    Grateful for answers.
    Regards
    Monica Svanlind

    I finally managed to install the updates, by logging out, logging in as administrator, re-installing the updates in order by executing the update files directly (double-click on them in Windows Explorer), and then logging out and logging back in as myself.
    FrameMaker installation and maintenance seems to work best (only if?) you do it as the administrator user (which is possibly a bug in itself). If you're running the update from within FrameMaker itself, you are unlikely to be logged in as administrator.
    The Frame support desk told me to uninstall and reinstall the whole package and updates. In the end I didn't have to do this. I don't know if it would have worked anyway for my system unless performed as administrator, which they and all documentation didn't mention.

Maybe you are looking for