Getting Error 0xC8000227 while updating pathces in winodws 2003 r2 enter prise editiion

While updating Windows Patches in windows 2003 r2 Enterprise Edition Getting Error 0xC8000227

Hi,
Based on my research, most of the error is caused by date time
inconsistence.
So please confirm you have correct date time settings.
Hope this helps.

Similar Messages

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • Getting error message while updating Job attributes using PP03 for IT1641

    Hey Guys,
    We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
    Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
    Thanks...
    Edited by: Karan Gheewala on Apr 3, 2008 9:06 PM

    Solved using Note 123383 - WC: Customizing worker's compensation tables
    Thanks,..

  • HT4623 i am getting error 1604 while updating iphone 4

    I am getting error 1604 while updating my iphone 4 to ios 6.01. how to update the phone 

    look here also.
    http://support.apple.com/kb/TS3694

  • Getting error 3194 while updating iphone 4 to iOS 5.1

    Any idea how to fix this? BTW the iphone is currently running ios 5.0.1
    thank you.

    Are you on the latest version of iTunes ?
    See if this page helps : http://support.apple.com/kb/TS3694#error3194

  • Getting error message while defining Profit Center

    Dear Expert,
    Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit center"Conversion failed when converting the nvarchar value "Profit Center Name" to data type int (CINF)".
    If anybody had a solution or came across this kind of situation then please forward us your valuable information that would be really great to tackle and out come from this issue.
    Thanks in Advance
    Regards
    Krishna

    Dear Krishna,
    What is your B1 version and PL? Is it upgraded from an old one?
    Thanks,
    Gordon

  • I'm getting error 5000 while trying to backup my phone before I can run an update

    I'm getting error 5000 while trying to backup my phone so I can run an update. I'm getting a message that says my back up is corrupt. What does that mean and how can I fix it?

    Hi
    This is an easy Q: to set - but there is no simple and plain answer only a lot of more or less plausibly suggestions.
    Error -50 = paramErr  Error in user parameter list
    Can there be any external hard disks - if so How is/are it/they formatted ?
    If so it Must be Mac OS Extended (hfs) if used for Video.
    UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
    What this means in Your situation is above me.
    • free space on internal boot hard disk 11Gb is on the limit to work when You select Export and might be it.
    Video used - there are several video formats/codecs and iMovie can not use all of them, they evolve to fast.
    • So try to find out by opening a raw video in QuickTime-player and then open Inspector (cmd+I) and read
    Video Format/Codec: nnnnnnnn
    What does it read ?
    Pictures
    • in what format ? .jpg, .bmp, .tif, else ?
    Audio
    • from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
    I convert all audio to .aiff - in iTunes I burn out as an Audio-CD .aiff (not .mp3) and use the files on this in my movie projects.
    Some times it's needed to trash the "com.apple.iMovie.plist" file in You USER-Library/Preferences (not Library on Root level (when opening Macintosh HD) - but the one in Your home folder.
    Many users has not observed that there are TWO libraries.
    • Library - at root level
    • Library - in user/account folder - THIS IS THE ONE to look into
    from Luke Burns
    I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
    I don't know why that could cause that big of a problem, but it did..
    Yours Bengt W

  • I am getting error message while attempting to upgrade the software to iOS 6.1.3

    Hi,
    Need help on this, i am getting error message while attempting to upgrade the software to iOS 6.1.3

    The Current iOS for the iPhone 4s is iOS 7
    How to update your iPhone, iPad, or iPod touch

  • "An error occurred while updating the configuration"

    I recieved an Apple Airport Base Station in the mail today. I got it second hand, and I performed a hard-reset since I didn't have the password and stuff. I wanted to update it properly before I started using it.
    I have followed the guides in here point by point, but all I get when I am trying to connect with the AirPort Admin Utility is the error in the topic: "An error occurred while updating configuration".
    I've been surfing and googling for hours now, and can't seem to find the solution to this.
    The Base Station has a model no. M8440, and that's all I know about it. First I thought it was the Snow, then the Graphite and now I don't know. The reason I get confused is because I've read about all these different colored lights.
    Here's a description of my Base Station - in case someone recognized it, and can help me identify it:
    - It's one of those "UFO's"
    - It's all white, with a silver Apple-logo
    - It's got three ports: Modem, WAN and LAN
    - It's got three lights - ALL WHITE all the time.
    I've tried to download firmware - the last I tried was called AirPortFW4.0.9.img - but when I try to run it by clicking it I get the error "The destination folder "AirPort whatever firmware whatever" is on a locked volume.
    My computer is a 2,0 HGz MacBook Pro, and int the AirPort Admin Utility the Base Station is said to be V4.0 dev with IP 192.42.249.13 - so it seems to be hard-resat all right...
    Please folks...help me out!

    I've also encountered the same problem with an older dual ethernet airport.
    I first started having problems with the original one about 8 months ago, and after spending a ridiculous three hours on the phone with AppleCare they sent me out a refurbished replacement. That one worked fine for about 5 months, but then started dropping the signal again, before becoming "unfindable". I went through the same processes, (soft reset, then hard reset etc.) which sometimes solved the problem. I eventually I took it to an Apple Store and of course, it worked fine once I got there. Strange thing is, I took it home and it continued working without incident...for a month. When it happened again, I decided to forgo all the the diagnostic work and just take it back to the store. Sure enough, it fixed itself again, then broke again a few weeks later (now).
    Unfortunately, I just had knee surgery and can't get down there now, (which was getting ridiculous anyway), so I went through everything again for the first time on the MBP. I ended up getting the "An error occurred while updating the configuration" message, and after reading this thread started up the old TiBook. The reconfig worked on there, but it still isn't visible on either computer. In fact, it then becomes inaccesible even through LAN on the TiBook through either the AirPort Admin or the dropdown, though it did appear on the MBP via AirPort Admin. However, it says the software on the airport cannot be uploaded or changed due to out of date software on my computer, and suggests I go to apple.com/support to update my computer's software, which is already current. It does however say that I may be able to change the settings and so forth, which I was able to do. Unfortunately, it still does not show up anywhere else on either computer, no matter how much I tinker with the settings.
    Any ideas? I suppose I'll just stick with built-in ethernet till I am mobile again.
    MacBook Pro 15 Intel Duo Core 2.16GHz 2GB/100GB Serial ATA drive@7200rpm   Mac OS X (10.4.7)   '02 Titanium Powerbook G4 1GHz 1GB/60GB/Superdrive (currently awaiting a new hard drive)

  • An error occurred while updating mail preferences

    Hi guys, i get this error "An error occurred while updating mail preferences" when try to enable vacation message in uwc.....any idea? is a hosted domain uwc...

    hi jay,
    mmp 2005q1 patched 118207-42
    uwc 2005q1 patched 118540-21
    there is 2 ldap servers running master replica
    but when i tried on MMP's Messenger Express (webmail), i managed to do it, but not able when using uwc. ( anyway, Messager Express is not using since there is uwc)

  • Error code while updating CS6

    I'm getting this code while updating my adobe products...specifically CS6     U44M1I210....can anyone tell me what this means and what I should do
    to make the download complete?
    Thanks

    Googling "U44M1I210" points to http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
    See if that KB article helps.

  • "An error occurred while updating the default player for audio file types"

    Getting ready for a deployment of version 9.2 of iTunes for 1400+ users.
    Getting this error when a 'normal' user goes into Edit/Preferences of iTunes and makes no changes.
    "An error occurred while updating the default player for audio file types. you do not have enough access privileges for this operation."
    I've elevated privileges of the C:\program files\itunes directory for this user to Full Control however problem remains.
    Tried to modify the folder to remove 'read-only', as found this suggestion on here, but read-only keeps applying itself.
    User has full rights to the location of the media as specified under Advanced Tab. If I tick 'Set as default media player' and remove tick and then click OK I do not get the error. From what I've read it's affected older versions of iTunes also.
    Doe anyone have any other suggestions?
    Thanks in advance.

    I had a similar issue. Turned out that - somehow - one of the directories or files in my iTunes music folder had gotten set to read only. Fixing it was easy.
    Go to Edit/Preferences.
    Choose the Advanced tab
    in the General subtab select the contents of the box labeled "iTunes Music folder location"
    Click Start, choose Run
    Paste the location
    Press the button to move up one level
    Right-click the music folder, choose Properties
    If this is your problem, the read-only box will be a solid color or checked. Set it to empty and choose the default "apply to folder and all subfolders and files." This will set everything in there readable, which after I did so I stopped getting the error.

  • Error 21 while updating to iOS 5

    While updating both my iPhone 3GS and iPad 2 to iOS5 I get error 21 while restoring after the update. I keep getting it no matter how many time I restore. What can I do?

    i had the same problem, i called apple care and they told me that it was a hardware issue but not too worry i fix mine by reinstalling win 7 on my computer and it worked like a charm, but if you dont want to do that try
    check your host file in windows and make sure it hasnt been edited
    check firewall and make sure that the ports that itunes needs are allowed through
    when updating turn your antivirus off
    but if that dont work i know if you want it up and working until u find out what the issue is i would recommend tiny umbrella so u can kick out of recovery mode (needs java)
    hope this helps

  • Getting "error unknown" while downloading apps.

    Hey guys,
    I was downloading and updating apps when after the app says "waiting" i would get an unknown error. would ask constantly for a password when i hit retry. I have signed out through settings. and also reset the device after signing out. also this was done after filling out security questions through my ipad. thanks for the help.

    Rehan45786 wrote:
    After changing my password so many times, I m getting error message while downloading apps that my id has been disables.
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT201210 Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions

    Keep getting error 9006 when updating iOS system for iPOD and iPHONE and not sure what to do, any solutions?

    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 1000, and 9006
    Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    Errors related to downgrading iOS

Maybe you are looking for

  • Driver (de) installation issue / services.

    Hello all, I'm currently facing a severe problem with my soundcard and hope that this forum can help me to solve this issue... My PC is a Dell XPS 600 system (dated March 2006), Intel 2C 3.00 GHz, 2 GB RAM, 2x250 GB Raid 0, nVidia GeForce 6800, Windo

  • This 3 month warranty is really starting to get me angry...

    Dude, I swear they time the zen micro!!! after the 3 month warranty, it dies on you, and youre expected to pay forty bucks to get it fixed... thats really, really low of creative... I supported it by buying the zen micro on the first day, and this is

  • Problem in jsp page

    hai everybody, I wrote a html page and jsp. In HTML we will take values and gets calculated in the jsp ,but jsp page is not working "CAN U GUYS HAVE A LOOK AND TELL ME" Thank you in advance. this is the html page. Specify the quantity you want to buy

  • Please is possible to create the most common adf components dinamically?

    Or you have some comment or advise? I need to create dynamically forms from a definition on tables. I don't need but anyway I didn't find a way to create entities dinamically, only views. Thank you :)

  • Flex 4.6 Android localized app name problem

    Hi All, me In air_buildingapps.pdf: You can specify multiple languages for the name and description elements in the application descriptor file. For example, the following specifies the application name in three languages (English, French, and German