Getting error 10401:Unknown Device Error from configured PCI-6036E
I have installed a PCI-6036E into a PC with a P-II and 32MB RAM. I am running NT4.0 SP6 operating system. Attached to the PCI-6036E is an SC2345 with one SCC-A10 attenuator module. When I try to run either one of the sample solutions or a VI that I have written, I get an error 10401 Unknown Device. The text goes on to say that the board is either unsupported or not configured. When I go to the MAX software, I can see the board and it lists the interupt as IRQ 11 and DMA as 0. The values are grayed out. The SC2345 and installed module are set up as accessories. If I click the Test Resources button on the Properties window, it comes up with the error that the device is not responding to the first IRQ level
How can I fix this? Is this an NT specific problem or will this sort of thing happen under Win9x and Win2k?
Videojet,
The types of errors you are receiving usually indicate improper installation or a bad board. Please make sure you have followed the proper installation procedure outlined in the Hardware Installation Wizard: http://www.ni.com/support/install/.
If you find that you may have a bad piece of hardware, please initiate a service request on www.ni.com/ask. Call into to our technical support line to repair your board.
Have a great day.
Message Edited by Support on 01-22-2007 11:24 AM
Similar Messages
-
Auto update failed, and Itunes would not run tried reinstall but got apple mobile device error? Any advice?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
ITunes installation errors and Apple Mobile Device Errors
First I will explain how I got to where I am now. I had the an iTunes 7 version, don't know the specific, and I have an ipod touch. I had been ignoring the iTunes 8 upgradge things upon open of iTunes, cause i had absolutely no need for it and syncing music to my ipod was still working, and i dont care for itunes besides being able to use my ipod. Then the iphone os 3.0 came out and i wanted to download/pay for it, and when i attempted to do this i was promptly instructed that I needed iTunes 8. I closed itunes and reopened so i could just tell the prompt that i wanted to upgrade, then bonjour opened and i selected the itunes/quicktime package, it gave me an error saying i needed to download manually, so i turned off automatic install. I then downloaded again, it opened a folder with iTunes.msi among other things, I double clicked itunes.msi and it proceeded to install. I then had iTunes 8 installed, opened it up, and with my ipod touch connected, it told me I needed upgraded apple mobile device and i had to uninstall both apple mobile device and itunes to do this. so i uninstall itunes through add/remove programs, and attempted to uninstall apple mobile device and everytime i did this it would not complete and gave me "Fatal Error" prompt. I then tried to reinstall iTunes and it would not install, kept giving me an error and told me to try again. I searched google for answers and the best anyone could say was delete missing files and try again, so i can CCleaner and got rid of registrys etc, and still would not allow me to uninstall apple mobile device. i reinstalled itunes and it actually worked this time, and then i plug in my ipod touch and it tells me i need the upgraded apple mobile device again, and that i need to uninstall apple mobile device and itunes to do this. If i could get rid of apple mobile device altogether maybe i wouldnt have this problem, but it simply wont let me. Any help with this? and sorry this was so long, i figured someone would need to know what happened to know how to fix it.
It sounds as though using the Microsoft Installer cleanup utility is worth a go.
I will give you a method for removal of iTunes and related programs with clean up, I think you have already done the removal, but just in case you missed anything out.
==
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Save the files on your PC.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes. -
Runtime error and I/O device error
Im having problems with my toshiba laptop. When it starts up a message appears saying runtime error you can only click OK and it goes away, does anyone have any idea about this?
I also cant put software off a cd-rom onto my laptop as a message saying not accessible, I/O device error comes up when you click the cd drive.
I am useless with computers and dont know what to do!Hi Kat
Can you please tell us which notebook model you have and since when this problem occur?
Is the DVD drive exchanged or is there some other important info that can help us?
By the way: check please this article http://support.microsoft.com/?kbid=891894
Good luck! -
"internal error cannot detect your device" error...
hi, i have a nokia 5310,sim locked to Rogers, the firmware version of my nokia is 03.63, im trying to update it...im using the latest version of nokia OVI,whenever it starts to intall the update,it stalls, then an error message shows up,"internal error >cannot detect your device",i tried to use windows xp/vista,same error,i also tried the PC SUITE,same error,i noticed that the computer will prompt me that the device is connected (via usb),but at the moment the update starts to intall,it disconnects,( the usb is firmly and securely attached to the device),then right after i click 'finish' on the OVI update screen to go back to the main menu, the device re connects itself to OVI (computer),i hope someone can tell me why this is happening,thank you.
hi, i have a nokia 5310,sim locked to Rogers, the firmware version of my nokia is 03.63, im trying to update it...im using the latest version of nokia OVI,whenever it starts to intall the update,it stalls, then an error message shows up,"internal error >cannot detect your device",i tried to use windows xp/vista,same error,i also tried the PC SUITE,same error,i noticed that the computer will prompt me that the device is connected (via usb),but at the moment the update starts to intall,it disconnects,( the usb is firmly and securely attached to the device),then right after i click 'finish' on the OVI update screen to go back to the main menu, the device re connects itself to OVI (computer),i hope someone can tell me why this is happening,thank you.
-
Error OXE800400C and intenal device error
Please can someone help me......I have an Ipod touch and since upgrading to the latest sofetware (at Apples suggestion!) I cannot sync any of my music or apps onto my touch. Syncing takes hours and eventually throws up the following errors 'internal device error', 'device timed out', 'unknown error occurred OXE800400C'. I've been to my local Apple store and they have reset all the software etc - seems to be something on my computer clashing with my Ipod?? any suggestions anyone?
Werepairs wrote:
Plug out the battery and connect it in safe mode for reset
Details please? You're assuming this user would even know what "Safe Mode" is.
And "plug out the battery"? What?
Article ID: KB17877 How to start a BlackBerry smartphone in Safe Mode http://www.blackberry.com/btsc/KB17877
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to visualise continues Data aquisition from a PCI 6602 with 2121 BNC connector board in C++ ?
Hello everyone,
We are trying to get on the screen the aquired pulses from our PCI 6602 with a 2121 BNC connector board, from several devices. We are able to read the data and save without problem, but we cannot look at it while we are measuring. Anybody has an idea to how program this in C++ ? Any suggestion is welcome!
Thanks for the helpHi,
try to look for some example programs and Tutorials:
Examples Results
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:ex/q/DAQmx%20C%2B%2B/...
Tutorials Results
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/catnav:tu/q/DAQmx%20C%2B%2B/...
You should also have a look at the "C Reference Help" which is installed with the NI DAQmx driver.
Acquire N Scans (Visual C++ 6.0, CW++, NI-DAQ)
http://zone.ni.com/devzone/cda/epd/p/id/207
Continuous Analog Acquisition with Producer Consumer Architecture in C#
https://decibel.ni.com/content/docs/DOC-4253
Good Luck!
Matteo -
Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?
Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
[You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972] -
How do I get music onto my iPhone without having to download it from the Cloud? My iPhone gives the error "sync will resume when "computer" is available" on the final step of synching. The computer says "waiting for changes to be applied" but the phone doesn't have the two little sync arrows anymore. Seems it will stay like that for hours if I don't cancel it. I've tried syncing the songs with the cord & without the cord; using only purchased music or only a few songs. I've restarted both devices & both are updated with the latest software. My phone says it hasn't synced in 5 months, even though I've tried. WiFi is working. I've tried checking and unchecking the box in iTunes. I've turned Windows Firewall on/off. Ran the diagnostics in iTunes. Nothing seems to work. Help!
Hello Megurine Lockhart,
I would recommend re syncing the music to the phone from iTunes by unchecking the sync music checkbox in iTunes, sync, then re check it and sync again.
For reference this is what I mean:
Syncing music
Connect your iPod to your computer and open iTunes.
Select your your iPod in the Devices section on the left side of the iTunes window.
In the main iTunes browser window, select Music.
Select the option to Sync Music. You may also select "Include Music videos" if you would like to sync Music videos to a device.
From: iTunes: Syncing media content to iPod
http://support.apple.com/kb/ht1351
The article references an iPod but its the same for an iPhone.
All the best,
Sterling -
MXI-3 not working get error 10401 from max
get error 10401 when triying to access cards in PXI1000 chassis using MAX test panels
The 10401 error is usually indicative of a problem with a DAQ card, not a MXI-3 card, but anything is possible. I will give you some general tips for troubleshooting the MXI-3 kit, but the DAQ card could ultimately be the problem.
First, do you have the MXI-3 Optimization Software installed? If so, does it run properly on boot up? This software should detect the presence of the MXI-3 link. If the optimization software is having problems running, I would recommend emptying your chassis of all cards but the MXI-3 and try booting up and running the software. If problems persist, you could try changing the PCI slot of your PCI-MXI-3 card, or, if you have other MXI-3 hardware available, you could switch pieces between the kits. You could even try the system with ano
ther PC.
If the MXI-3 kit is working properly, then the DAQ card or the chassis could be causing the problem. Have you tried any other cards behind the MXI-3 link? Have you tried the problematic card in multiple slots? Was the system ever working properly? If you feel the DAQ card is the problem, I would recommend creating a new support thread so that we can get our DAQ Applications Engineers to help you troubleshoot the issue.
Here is a link to more troubleshooting tips for MXI-3:
http://digital.ni.com/public.nsf/websearch/484f81e6570ad803862569ed007aaa41?OpenDocument
Ryan Tamblin
Applications Engineer
National Instruments -
SAP XI 3.0 - Error while reading the ID of own business system from the SLD
Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar -
Error while reading the ID of own business system from the SLD for system
Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar -
Error while reading ID of own business system from the SLD
HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
AnandHi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu. -
Error while reading ID of own business system from the SLD for system DPI
Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PMHi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv... -
Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one
Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support
Maybe you are looking for
-
Can we load data using .xls in user define format(without using default template)
Hi All, I'm new bee to FDM. Part of HFM support i use FDM to load flatfile data. Just has a bit more knowledge than end user. Requirement is that i need to load data from MS excel to Planning application via FDM. Previously application is in Excel(Ma
-
Diff b/w select endselect and select into table............
what is the difference b/w Select Endselect and select into table.... Akshitha..
-
Same material master in two company codes with batch management
Hi, There are two company codes in one client. In one batch management is already active. But in another company code batch management is not required. Is it possible to have batch management active in one company code and inactive in another company
-
Our organization purchased ten Acrobat Pro XI - Student Teacher Edition. The side of the box says "STOP - Proof of eligibility MUST be provided..." but it does not offer a specific link or form that needs to be completed. We are a small organizatio
-
Hello, My iPhone 4s iOS 5.1.1 keep rebooting (continuous reboot loop). I don't have a most recent backup. I need to backup my files first before I recover or restore my device OR get out of the reboot loop. Please help me.... Thanks