Getting error 3194 when trying to update to iOS 5

I am running iTunes 10.5 and am trying to update my iPhone 4 to iOS 5. The error im getting is 3194 which is defferent to everybodys 3200. Does anyone know why this may be or how I can overcome the error?
Thanks in advance.
Phil

Phil,
Same here, tried all the suggested steps in the 'more info' link but still gave the 3194.
A quick search of iPhone 4 discussions suggested these steps (thanks MacMan TommyC)
Do a HARD reset of the iPhone - holding the Lock/Power button and Home Buttons until the iPhone powers down and the Apple Logo reappears.
Make sure that your Mac (I'm assuming) has all recent security and iTunes updates completed; Safari, too, made a diff here as well.
Do a HARD reset on the computer as well.
Launch ITunes FIRST then connect the IPhone to the USB again.
Upon recognition, hopefully, ITunes will want to do the Update to iOS 5 for you, do its LOOOOONG back-up, and then install the update for you and then put everything back on.
Also added the following to the host file, not sure if it actually helped but it was came up quite frequent on a Google search
#74.208.10.249 gs.apple.com
Hope the above helps

Similar Messages

  • HT201210 keep getting error 3194 when trying to update ,what is this

    keep getting error 3194 when trying to update,what is this

    error code 3194 http://support.apple.com/kb/TS3694  Do you have the lastest version of iTunes? if not update.

  • HT201210 error 3194 when trying to update to ios 5.1.1

    i can not update my iphone 4, when i try to update on i tunes it extracts the software but when it gets to verifying iphone i get the error code 3194,
    i have tried to update also on the phone through the iphone and get a message saying not enough free space you need at least igb of free space.
    i have also tried turning of norton security and firewall but no joy.

    I have fixed this now by clicking on the fit it for me button, on this link http://support.microsoft.com/kb/972034 it fixes the host file for you, Happy Days

  • IPhone 5 stuck in recovery mode loop, get error 9 when trying to update to ios 7 help me

    so i have tried every way (except a different computer because that option is not available right now). i wanted to reset (factory reset erase all content) my iphone 5 because it was being really wierd. id be using an app all the sudden it would just turn off, try to restart itself, never get past apple logo screen, crash, attempt restart again etc. only when i would hold home and power button it would start up the right way. anyway i went into my iphones settings> general> reset> erase all content and settings. BIG MISTAKE!!!!!!!! ever since then it just have been stuck in recovery mode. the first time i tried to restore it. i got error 3914 i think. doing a little research i found i needed to update itunes so i did (11.1.5.5). then it said i needed to download iOS 7 so i did. and when i try to restore it, i get error 9. itunes is up to date. my windows is up to date. ive tried everything i can think of and im gettin to the point where im gona throe it at the wall
    SOMEONE PLEASE HELPME

    And you have done all include here?
    http://support.apple.com/kb/TS3125

  • Error "3194" when trying to update to iOS 5

    Hi guys,
    I've downloaded the iOS 5 firmware but after it backs up my device and attempts to install I get an error "3194"
    A google search doesnt seem to show any fix that has worked.
    Thanks in advance,
    - liquidshade

    Phil,
    Same here, tried all the suggested steps in the 'more info' link but still gave the 3194.
    A quick search of iPhone 4 discussions suggested these steps (thanks MacMan TommyC)
    Do a HARD reset of the iPhone - holding the Lock/Power button and Home Buttons until the iPhone powers down and the Apple Logo reappears.
    Make sure that your Mac (I'm assuming) has all recent security and iTunes updates completed; Safari, too, made a diff here as well.
    Do a HARD reset on the computer as well.
    Launch ITunes FIRST then connect the IPhone to the USB again.
    Upon recognition, hopefully, ITunes will want to do the Update to iOS 5 for you, do its LOOOOONG back-up, and then install the update for you and then put everything back on.
    Also added the following to the host file, not sure if it actually helped but it was came up quite frequent on a Google search
    #74.208.10.249 gs.apple.com
    Hope the above helps

  • Keep getting error 4002 when trying to update Genius

    I haven't seen anyone write about getting error 4002 when trying to update genius in itunes. I select update genius and it gathers information and sends it to the itunes store I assume. And then waits a few seconds and then I get the following message "Genius results can't be updated right now. An unknown error occurred (4002) Please try again later." I've been getting this message for well over a month and I keep hoping they'll be an update or somehow it will magically be fixed, but nothing has changed. Anyone have any insight on this one?
    The current ituned library it 123GB and is stored on external drives. It should also be noted that when I first turned on genius when it was released it went through this whole problem without a hitch. I just can't update Genius with any of the music I've added since then. I can't even get genius to recognize music that I got from the itunes store since I've had the problem.

    Be careful - this was a disaster for me. Once I did this, I got a different error - an error 4010 and in trying to recover, caused a lot of library issues that forced me to go to a backup to fix. You'll find a lot of people having the 4010 problem. Basically iTunes Genius is a disaster and Apple isn't fixing it.

  • Why do i get error 43 when trying to update iphone3

    why do i keep getting error 43 when trying to update iphone3? very frustrating please help!

    If you back up your device manually before syncing, you can restore it from that backup again. A manual backup does not include the sync process.
    To backup manually do this:
    Connect your iPod to your computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your iPod let iTunes erase all media content and  restore your settings and app data from your manual backup afterwards.

  • TS3694 getting error 3004 when trying to update to ios7

    I keep getting error 3004 when trying to update to ios7

    I was trying to update my iphone 5 to IOS7 and couldnt do it for 5 times then I did the following and was able to update it right away
    Clearing your DNS cache may resolve the issue and enable you to connect to the iTunes Store.
    The easiest way to clear your DNS cache is to shut down your computer completely and then restart. If you can't shut down, you can clear your DNS cache manually.
    Click Start and choose Run.
    In the dialog that appears, type “cmd” (don’t type the quotes) and click OK.
    After the DOS prompt (C:\), type “ipconfig /flushdns” (without the quotes) and press Enter. Make sure you enter a single blank space after “ipconfig.”
    Let me know if it solved the issue for you

  • I keep getting Error 17 when trying to update to 7.0.4 iPad Air

    I keep getting Error 17 when trying to update to 7.0.4 and the Ipad stays in USB Mode

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
     Cheers, Tom
    Check for hardware issues
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the alert when you update or restore, contact Apple support.
    Common errors: 1, 10-47, 1002, 1011, 1012, 1014, 1000-1020.
    Message was edited by: Texas Mac Man

  • Has anyone else gotten the error message when trying to update to ios 6 either through iphone or itunes?

    Has anyone else gotten an error message whne trying to update to ios 6 through iphone for itunes?

    Uninstall iTunes, and go to http://support.apple.com/kb/DL1577 and get the 64 bit version.

  • HT201210 keep getting error message when trying to update iOS to 5.1.1

    I have had no trouble updating the several iPads under my charge at work, however can't update my own.  Am using iOS 5.1 currently on original iPad.  I go to settings and it looks for any updates available and I click install to 5.1.1 but keep getting error message saying there was an error when trying to update.  I am on my home wifi on my iPad.  Have done same procedure with about 5 other iPads with no trouble. What can I do?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • I am getting an error message when trying to update to iOS 7

    I am trying to update to iOS 7 on my iphone 5 and every time I click to install it, I am getting an error message that iOS 7 cannot be installed. I have restarted my phone about 5 times..

    What is the error message and number?

  • HT4623 Why do i keep getting this error message when trying to update to ios 5.1 "unable to install update"?

    Ive gotten this when trying to update while connected to iTunes and when I tried to update through general.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Error 14 when trying to update to iOS 5.0.1

    I keep getting "unknown error occured (14)" when trying to update (and now subsequently restore) my iPad to iOS 5.0.1.  Any ideas on what to do?

    William,
    In fact I have tried both the normal software update a couple of times AND downloading the combo installer. The message, when trying to install the latter, was "Checksum Invalid". Is it possible that the files get corrupt during download? I am getting crazy - I need the upgrade to 10.5.2 in order to upgrade Aperture 1.5 to 2.0, which again is necessary in order to download images from my new camera... :((

  • I get error 2324 when trying to update itunes.  Suggestions?

    I get error code 2324 when trying to install the latest itunes.  Any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

Maybe you are looking for

  • Billing in Stock transfer

    Hi, happy new year to all of u. We are doing stock transfer between the plant under same company code. Create STO ME21N As it is normal there in the item details were should get shipping date i.e. customer number Go for Delivery VL10B Shipping point

  • ITunes 7.4 and windows vista

    I recently purchased a laptop w/win vista and a preinstalled iTunes version 4. I downloaded the newest version of iTunes 7.4 and when trying to install it an error message of ...itunes.exe is not a valid win32 application. Can anyone guide me in the

  • Please help me return to FireFox 4.x

    I MUST return to Firefox 4 because the Google Web Toolkit Developer Plugin, that I rely on for my development work, does not run in Firefox 5.0.

  • Execute CALL TRANSACTION in the background....

    Hi, I want to use CALL TRANSACTION in a report program and execute this report in the background. There is not GUI_UPLOAD / GUI_DOWNLOAD used anywhere. Can someone suggest me what precaution I need to take in my code for CALL TRANSACTION? Is there an

  • Detecting mouse click on a line

    I'm learning making GUI apps in Java. Here is my problem. Suppose I draw a line on a JPanel. If I want to find out if the line is clicked or not, what is the best way to do it? I did some research, looked at API. If I suppose my line is Line2D, then