Getting error 36331 while running prebuilt  etl for  first  time

Hi all,
I have installed BI apps 7.9.6 and OBIEE 10.1.3.4.1, DAC 10.13.4.1 on a Linux machine with Oracle 10gR2 as data base and EBS 11 i as the data source. I am running the prebuilt ETL for the first time for a new execution plan created with Financials-Receivables subject area added to it. Of the total 292 tasks 30 tasks run well and the ETL fails after that with the following error.
The following error message is from the DAC server log. I have seen the session logs and workflow logs for the SDE_ORA_CodeDimension_Supplier_Payment_Method task, but could figure out what could be the issue. Please let me know if any one has encountered the same issue.
=====================================
ERROR OUTPUT
=====================================
524 SEVERE Tue Sep 22 06:41:14 EDT 2009 Could not attach to workflow because of errorCode 36331 For workflow SDE_ORA_CodeDimension_Supplier_Payment_Method
525 SEVERE Tue Sep 22 06:41:14 EDT 2009
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORA11510_Adaptor:SDE_ORA_CodeDimension_Supplier_Payment_Method:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
Error while contacting Informatica server for getting workflow status for SDE_ORA_CodeDimension_Supplier_Payment_Method
Error Code = 36331:Unknown reason for error code 36331
Pmcmd output :
Thx
RM

Found that the indices on tables are failing to be created while running the workflow. I have updated the status of the task as completed and re queued the task. ETL ran successfully then.

Similar Messages

  • HT1476 if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in A

    if i bought my ipod touch 32gb in germany where the voltage is 220v and i live in America where the voltage is 110, i will have to wait to get to my home to charge it for first time or I can charge it here and change the voltage of the battery in America?
    please i need help, im worried that if I connect my ipod here, it will burn or sometihng bad.

    Just connect it to a computer's USB port.
    Most wall chargers are dual voltage (110- 220 volts) and only require a plug adopter. Check the wall charger to see if yours is.

  • How to disable chanllenging questions while user log in for first time

    Hi All,
    How to disable challenging questions while user log in for first time in OIM 10g and OIM 11g
    also i need to know how to change the Oracle logo with custom logo in both versions

    In 11G:
    To disable challenge questions at start up: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14308/system_props.htm#BABBDCJH (System Property Named: "Force to set question at start up)
    To change logo: http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14309/uicust.htm#CHDIFJEJ
    In 10G:
    Dig the documentation.
    A suggestion, please go through the documents first as they have quite a bit of information.
    HTH,
    BB

  • Getting error message while running forms(Forms11g) using port 8888

    Hi ,
    I am facing one issue while running forms.By using http://localhost:9001 forms are working fine.
    When i use http://localhost:8888 it is showing Internet explorer can not display this page.
    It seems it has some issue while installing forms 11g developer suit.
    Below are the details of forms and web logic versions.
    forms 11.1.2.0.0
    web logic server : 10.3
    Can you please help me to run the forms using 8888 port.
    Thanks,
    Kalpana.

    Check the port numbers 8888 is allowed by default to Oracle WebCenter Spaces
    http://docs.oracle.com/cd/E14571_01/core.1111/e10105/portnums.htm#ASADM432
    don't know exaclty how you can change the port, maybe in config files
    see this thread :
    {message:id=4446974}
    Regards
    Jean-Yves
    Edited by: JeanYves Bernier on 15 déc. 2012 00:20

  • Error while calling web service for first time

    Hello 
    I am calling a third party  web service using BasicHttp adapter and passing user name and password  in send port security tab by setting security mode to "Transport" and Transport client credential type" as Basic.
    every time when i redeploy or after long idle time i am getting below error and then second call works fine.We are using BT 2013.
    I used fiddler and i am not seeing any difference in both requests.Any one ran into this kind of issue?
    An error occurred while processing the message, refer to the details section for more information 
    Message ID: {030802BF-70EC-4CA3-8FB5-B694E7A12136}
    Instance ID: {7E04E1C0-3730-4645-9280-0FE51194CA67}
    Error Description: System.Net.WebException: The remote server returned an unexpected response: (400) Bad Request.
    <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
    <html><head>
    <title>400 Bad Request</title>
    </head><body>
    <h1>Bad Request</h1>
    <p>The request could not be understood by server due to
    malformed syntax.</p>
    </body></html>
    Thanks

    I will not comment on "IIS recycle its workers process
    ". I don't think you have ever said its IIS is the web server used by yourt 3rd paty to host their web service. We (atleast I) don't know wheather your 3rd party's web service is hosted on IIS. It’s some "Web Server"
    could be IIS (if its Microsoft based) or Apache or something else.
    Come back to your question, when the error says "The request could not be
    understood by server due to malformed syntax", when you’re sending the message as expected by 3rd party service, then it has nothing to do with your end, error is returned by your 3rd party. And as you have mentioned you are tracing the
    messages thru Fiddler and you see messages are constructed same and fine as expected by your 3rd party. Don't confuse its nothing on your party, either first deployment or last. Check with your 3rd party
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Trying to run Vertex vprtmupd for first time

    I am trying to run the Vertex vprtmupd for the first time on a fresh install on Linux. I am on 11.5.10.2 and have run the "Quantum Program Update Installer" with no problem ran great!
    I tried to run "Quantum Data Update Installer" and it failed with this error:
    HR_6882_HRPROC_ASSERT
    LOCATION py3vntsetup:2
    APP-PAY-06882: Assertion failure detected at location py3vntsetup:2.
    Cause: an internal error has occurred at location py3vntsetup:2.
    Action: please contact your Oracle customer representative.
    I then tried to run it manuly by running "vprtmupd" and this is what happened:
    Select a Monthly Update Function
    1. - Update Payroll Tax Database
    2. - Exit Program
    Select: 1
    Beginning Payroll Tax Monthly Update Process.
    Enter Data Source: /u01s/app/oracle/appl/pay/11.5.0/vendor/quantum/data
    Unable to establish connection with the Payroll Tax Database. Verify the
    information entered and retry.
    Press Enter to continue...
    WARNING! The update process will destroy the contents of the
    current database before it creates a new one. Please make
    a backup before proceeding.
    Any idea? It seems like I need the tax database created before the "vprtmupd" program will work. How do you create the tax database for the first time?

    Chris,
    The same error is reported in the following docs, please review it and see if any is applicable.
    QuickPay Fails with HR_6882_HRPROC_ASSERT, APP-PAY-06882: Assertion failure Detected at Location py3vntsetup:25 [ID 242952.1]
    VERTEX: Troubleshooting Document [ID 1059679.1]
    Payroll/Quickpay - APP-PAY-06882: Assertion failure detected at location py3vntsetup:1c [ID 315195.1]
    QuickPay Error APP-PAY-06882: Assertion Failure Detected At Location Py3vntsetup:1d [ID 1186805.1]
    Vertex/Quantum Troubleshooting Guide [ID 735986.1]
    After Patch 5366666 Quantum Update Data Installer Fails With APP-PAY-06882 [ID 399182.1]
    After ''Rapid Clone'' Payroll Fails With HR_6882_HRPROC_ASSERT [ID 368124.1]
    After YE 2008 Phase 1 Patch 7259999, Quick Pay Fails with HR_6882_HRPROC_ASSERT [ID 742556.1]
    Thanks,
    Hussein

  • Script runs not corrextly for first time

    Hello,
    i have kind a strange problem.
    Always wenn i run my script first time (after opening Diadem), it works not corretly. Specificly creating a report goes wrong.
    When i start the script for second time (and each additional time) everything works fine and correctly?!
    For understand:
    - I do some (mathemtical) analyse  - always works correctly
    - Load/Append prepared ReportLayout, add curves, create text objects - doesn't work for the first time, then it alwas works correctly
      The mistake is, that all curves (that should be in several appended layouts and text objects) are added in the first loaded report sheet (though the reportsheets were appended)
    As i said, when i start the script second time (and each additional time) everything works fine as it should?!
    Thanks
    Solved!
    Go to Solution.

    Hello,
    yes i tryed with debugger step by step. No errors. Ironically with debugger step by step everything works fine (even for he first time)
    It looks like, when i run the script for the first time, the appended report sheets are not active, because all curves are added in the first report sheet.
    But why works it wrong only for the first time and then everything works fine?
    Thanks

  • -3095 error and then 5 when connected for first time.

    I Inboxes the AppleTV and I get the -3905 error and when I tried again I get error 5.
    cant seem to connect to my Wifi.
    Thanks in advance!

    Hi LeoCal,
    I apologize, I'm a bit unclear on the exact nature of the issue you are describing, and/or when exactly you are seeing these error messages. If your Apple TV doesn't appear to be working correctly on first setup, you may find the troubleshooting steps outlined in the following article helpful:
    Apple TV: Basic troubleshooting - Apple Support
    Regards,
    - Brenden

  • When I start the installation process, I get error code 1. This is my first time buying or trying this program, though my computer says it just downloaded 3 times today.

    I keep getting error code 1 when trying to install the software to my computer. It also downloaded 3 times today and won't go directly into the setup mode. Ideas? Suggestions?

    Cassandrab14701469 please utilize the steps listed in Error "Failed to Install" Creative Cloud Desktop application to resolve the current error.  Error 1 is often a file permission error related to the folders and files which need to be updated.  Please feel free to update this discussion if you have any questions regarding the steps listed within the document.

  • Can you open files while FileVault is encrypting for first time?

    I cannot open any of my documents on my computer since FileVault started encrypting.. what do I do? I need my notes and documents for classes.

    I can open documents in Word or Microsoft programs, but I cannot open my notes with Preview whatsoever.. I will click on a document and it will not pop up.

  • Use a valid email error when logging at app store for first time

    I bought a mac mini 2012 and created my apple ID with a gmail login...
    all good, verified email at gmail, and i am even logged right now with this ID, except that: when i try to download or update from app store a message "you must chose a valid email" appears... what to do?
    Of course i typed email and password correctly... the ID works everywhere, except in the appstore...
    thanks in advance!

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • HT4796 error occurred while preparing your information for transfer

    Downloaded Migration assistant on to my PC and when I open it I get "error occurred while preparing your information for transfer"
    I want to copy my email addresses etc. to my Macbook Pro.

    To find out what is causing the Migration Assistant to fail, you can check the SystemMigration log located in - C:\Users\[user name]\AppData\Local\Temp\SystemMigration

  • Unique Index Error while running the ETL process

    Hi,
    I have Installed Oracle BI Applications 7.9.4 and Informatica PowerCenter 7.1.4. I have done all the configuration steps as specified in the Oracle BI Applications Installation and Configuration Guide. While running the ETL process from DAC for Execution Plan 'Human Resources Oracle 11.5.10' some tasks going to status Failed.
    When I checked the log files for these tasks, I found the following error
    ANOMALY INFO::: Error while executing : CREATE INDEX:W_PAYROLL_F_ASSG_TMP:W_PRL_F_ASG_TMP_U1
    MESSAGE:::java.lang.Exception: Error while execution : CREATE UNIQUE INDEX
    W_PRL_F_ASG_TMP_U1
    ON
    W_PAYROLL_F_ASSG_TMP
    INTEGRATION_ID ASC
    ,DATASOURCE_NUM_ID ASC
    ,EFFECTIVE_FROM_DT ASC
    NOLOGGING PARALLEL
    with error java.sql.SQLException: ORA-12801: error signaled in parallel query server P000
    ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
    EXCEPTION CLASS::: java.lang.Exception
    I found some duplicate rows in the table W_PAYROLL_F_ASSG_TMP with the combination of the columns on which it is trying to create INDEX. Can anyone give me information for the following.
    1. Why it is trying to create the unique index on the combination of columns which may not be unique.
    2. Is it a problem with the data in the source database (means becoz of duplicate rows in the source system).
    How we need to fix this error. Do we need to delete the duplicate rows from the table in the data warehouse manually and re-run the ETL process or is there any other way to fix the problem.

    This query will identify the duplicate in the Warehouse table preventing the Index from being built:
    select count(*), integration_id, src_eff_from_dt from w_employee_ds group by integration_id, src_eff_from_dt having count(*)>1;
    To get the ETL to finish issue this delete to the W_EMPLOYEE_DS table:
    delete from w_employee_ds where integration_id = '2' and src_eff_from_dt ='04-JAN-91';
    To fix it so this does not happen again on another load you need to find the record in the Vision DB, it is in the PER_ALL_PEOPLE_F table. I have a Vision source and this worked:
    select rowid, person_id , LAST_NAME FROM PER_ALL_PEOPLE_F
    where EFFECTIVE_START_DATE = '04-JAN-91';
    ROWID PERSON_ID
    LAST_NAME
    AAAWXJAAMAAAwl/AAL 6272
    Kang
    AAAWXJAAMAAAwmAAAI 6272
    Kang
    AAAWXJAAMAAAwmAAA4 6307
    Lee
    delete from PER_ALL_PEOPLE_F
    where ROWID = 'AAAWXJAAMAAAwl/AAL';

  • Error while running a BDC for the Transaction F-02

    Hi,
           I'm getting an error <b><i>"Parking not possible during Batch Input"</i></b> while running a BDC for the transaction F-02.
           When i click on the error message it displays the message [b<i>]"In Customizing, you can control whether an error message is issued."</b></i>
            How to solve this issue?.
            Waiting for ur replies.........
    Regards
    N.Senthil

    Hi,
    When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
    Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
        Refer below theard for sample bdc code for f-02.
    https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
    Regards

  • Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

    Hi
    We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    this is the log:
    +---------------------------------------------------------------------------+
    Purchasing: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    POCISO module: Create Internal Orders
    +---------------------------------------------------------------------------+
    Current system time is 26-JUL-2013 09:21:09
    +---------------------------------------------------------------------------+
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Begin create internal sales order
    Updating Req Headers
    14 Reqs selected for processing
    Top of Fetch Loop
    Source Operating Unit: 82
    Selecting Currency Code
    Currency Code : MXP
    Selecting Order Type
    Order Type ID:1001
    Selecting Price List from Order Type
    Deliver To Location Id: 196
    Inserting Header : 3908784
    Getting the customer id
    Getting the customer id: 15334
    Unhandled Exception : ORA-01403: no data found
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
    Review your concurrent request log and/or report output file for more detailed information.
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    78
    Output is not being printed because:
    The print option has been disabled for this report.
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed
    Current system time is 26-JUL-2013 09:21:14
    +---------------------------------------------------------------------------+
    Some suggestion for resolve it??
    Thanks & Regards.

    In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
    When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
    If yes, please let me know the path and command to set the kernel value.
    Thanks
    Amith

Maybe you are looking for