Getting error:Absence type 100 was not found in Customizing for

Hi,
I am using the Standard workfllow for leave application, and when i am creating the request i am getting the bleow error:
'Absence type 100 was not found in Customizing for 21.10.2010'
What could be the reason, i have configured the statndard setting for leave type 100 in SPRO.
Thanks,
Krish.

Hi Kishore,
Please check the validity period for Absence type 100 configuration.
Also pass this Error message to your HR Functional consultant. It is the configuration issue and your FM have to take care of this issue.
Thanks.

Similar Messages

When i try to open iTunes I get error message "MSVCR80.dll was not found"

When I try to open iTunes I get error message "MSVCR80.dll was not found"

Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Getting Error base class BitmapAsset was not found

I am converting a project using Away3D boomstick to the new FL11 version. I have installed the 4.5.1 SDK, dropped in the new away3d classes, added the flashplayer11_b1_playerglobal_071311.swc and now I get the following error.
Description Resource Path Location Type
1017: The definition of base class BitmapAsset was not found. Mercer-Molehill line 10 Flex Problem
Any Ideas? I really need to get this working for a demo tomorrow.

It seem the right playergloblal is not accessed. If You compile in Flash IDE make sure that ActionsScript Settinng is configure with the rigth paths.
The SDK 4,5 has change the name of flex.swc to core.swc and others files.
Flex 4.5 Framework Differences
flex.swc and utilities.swc were renamed to core.swc and authoringsupport.swc
The datavisualization.swc was split into charts.swc and advancedgrids.swc.
Path to sdk
I put all those SWC in a folder in C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\flex_sdk\4.5\
Flash Actionscript settings. -> library path ->add the path till sdk
Configure globalplayer.swc. in Flash
in Common-Configuration/Player created a copy of FlashPlayer10_3.xml to FlashPlayer11.xml.
<player id="FlashPlayer11" version="12" asversion="3">
<name>Flash Player 11</name>
Finally
Flash Actionscript settings. -> library path ->add path till globalplayer
it work for me. ( tell me if I done wrong please).

Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"

I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?

Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder).

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server"

After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The requested URL was not found on this server".
Anyone have any ideas?

You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
6. I then rebooted the phone and launched the Photo Library.
7. The Library rebuilt it's self again and recreated the thumbnails.
8. The problem was fixed!!! Thank you M Bentley!
I hope this helps - this has been bugging me for 2 weeks.
Regards
Alijm23

It will not open & I get "...plc4.dll was not found..." error message

It will not open & I get "...plc4.dll was not found..." error message

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop. 
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. 
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling. 
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Do a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database. 
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

ITunes! Getting Error 7 Windows error 126 Also AVFoundationCF was not found.

Having trouble downloading iTunes! Getting Error 7 Windows error 126 Also AVFoundationCF was not found. Everything was OK until I update to new version of iTunes. I have uninstalled the entire apple app's restart, disc clean and still not able to install iTunes.

Same or almost: iTunes was not installed correctly. Please reinstall iTunes. (I dit it!) Error 7 (Windows error 2)

Hello, just wondering how i can fix my itunes when i keep getting these msges, MSVCR80.dll was not found and error 7 (windows error 126). can anybody help. cheers.

hello, just wondering how i can fix my itunes when i keep getting these msges, MSVCR80.dll was not found and error 7 (windows error 126). can anybody help. cheers.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Please help me with this error: "Apple application support was not found... Error 2"

Can anyone please help me with this error: "Apple application support was not found... Error 2"
I've followed the instructions by removing all Apple files from my laptop, but when I reinstall the iTunes software it still comes up with this message:
"Apple application support is required to run iTunesHelper. Please uninstall iTunes, then install iTunes again. Error 2"
Thank you

iTunes "Apple Application Support is required... Error 2" and possible fix.
I know this is a bit late but I came accross this thread trying to resolve this same problem and came up with a solution that worked for me, so thought I would share it here too. I hope it helps someone else.
I just resolved this on Win Vista (should apply equally for Win7 too). Please uninstall iTunes before proceeding though. I'll walk you through the process I followed, if you like you can jump straight to the Solution section.
Problems:
The initial error during the installation of iTunes was:
An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x8007054F
The error (after installing iTunes) when trying to run iTunes was:
Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
After trying various fixes around the forums I came across this MSKB article, which relates to the first installation error:
http://support.microsoft.com/kb/2688946
This lead me to trying to install MS Visual C++ but I received the following error trying to install that:
Error 1935.An error occurred during the installation of assembly ‘Microsoft.VC80.ATL,type=”win32”,version=”8.0.50727.762”,publicKeyToken=”1fc8b3 b9a1e18e3b”,processorArchitecture=”amd64”’. Please refer to Help and Support for more information. HRESULT: 0x80070BC9. Assembly interface: IassemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
Note: The installation of VC++ rolls back when it fails.
Solution:
Through this error I found this MSKB article:
http://support.microsoft.com/kb/946414
The Automated MS "Fix It" msi package didn’t work.
Note: Please backup your registry first (see the above MSKB article for instructions).
I opened the registry and (as instructed in the MSKB article) deleted the following keys:
HKEY_LOCAL_MACHINE\COMPONENTS\
PendingXmlIdentifier
NextQueueEntryIndex
AdvancedInstallersNeedResolving
Reboot and reinstall iTunes.
If it helps you please like this so others can find it.

When Logging in the user gets "The ID you entered was not found"

I have UCCX v8. All users can log in fine. However, I have created a new user and they are getting "The ID you entered was not found".
1. The user was created in CUCM, extension made available to UCCX, and device associated to RMuser account
2. The user shows up in resoureces and I can assign them to a queue
3. The User shows up in Tools/User Management/User List
4. You can assign the user to a Team
5. The User DOES NOT show up in the Supervisor
I have tried unassociating and re associating the user's device with the RM User account.
I have tried restarting the User Desktop Synchronisation Service.
I have deleted the User acount and recreated it
I have reset the passsword
When the user was deleted they showed up under inactive users in UCCX. I deleted the user from here, recreated the user in CUCM, and the new user showed un in resources. This suggests that synchonisation is workinhg.
Anyone have any other ideas that I can try?

You are not mentioned where you are trying to login is that CAD or Cisco supervisor desktop.
I also got the same error while I tried to login as Supervisor but the same time I am able to login CAD without any issue.
When I checked the user in UCCX it's not added as Supervisor so once I did I am able to login
I did this in UCCX 8.0.2
Hope this will help

SSL ERROR : The required certificate was not found

I am using Adobe Javascript this.submitForm to submit FDF. This works fine in Windows. When the same pdf is opened in a Linux environment I get the following error:
SSL ERROR : The required certificate was not found
and am required to run acroread -installCertificate.
This I do and it succeeds but the SSL error persists.
The this.submitForm command is given below:
/this.submitForm({cURL: 'https://some-webpath/FILE.cgi#FDF',bFDF: true,bGet: false});
When reading the documentation for the submitForm I see that the Acrobat Web Capture plug-in should be installed: I notice this is the case in Windows but not in Linux. Where can I get this?

Hi Ben,
The behavior you have noticed with the newly installed certificate files in
[home-folder]/.adobe/Acrobat/[version]/Cert folder
and the
[install-folder]/Adobe/Reader8/Reader/Cert/curl-ca-bundle.crt file is correct. Further, the behavior has not changed between Reader versions 8.x and 9.x
It is possible that the problem may be of the installed certificate not linking up to one of the Root CA-s. An Intermedia-CA certificate may be needed to be installed.
Could you mail me at " sanath at adobe dot com ", if possible, with more information about the problem (the PDF, the certificate in question - the file named like 123456.0 ), so that we at Adobe can work on resolving your problem
Regards
Sandip

HT201210 Hey guys, i was trying to restore my ipad 3 through itunes but it shows an error "The requested resource was not found".. so what do i do now?

Guys im getting an error "The requested resource was not found. what do i do???

Make sure you disable antivirus and firewall.
Reboot iPad and computer.

I get a "the requested URL was not found on this server" when trying to play a song in my iphone

I have a new iphone5 and after synking my songs and musice. I get a "The requested URL was not found on this server" when I click on a song or a music video. It is almost like itunes did not copy my songs from my account to the new iphone.

I was having the same problems with my movies and tv shows. I unchecked them, then rechecked them, and synced all them again. Presto! They are all working again. Thank you.

When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

When trying to download the latest version of iTunes, I receive the following error "Apple Application Support was not found", any suggestions?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2

Getting error in XI"RFC Program Not Found"

Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
Amit

Hi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit

Getting error:Absence type 100 was not found in Customizing for

Similar Messages

Maybe you are looking for