Getting error "Administrator has temporarily disabled user commands"

Hi ,
I am getting the error "Administrator has temporarily disabled user commands" while executing the report script. I have tried creating a new script and getting the same error. We are on 11.1.1.3
Appreciate any help..
Regards,
Mahesh

It is worth having a read of the following article on "My Oracle Support" - Error "1013009 - Administrator Has Temporarily Disabled User Commands" [ID 1216053.1]
It gives some examples of what can cause the issue and some bugs, ignore the 9.3.1 patch part.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Getting error "1013009 Administrator Has Temporarily Disabled User Commands

Hi All,
I am getting the error"1013009 Administrator Has Temporarily Disabled User Commands" while executing a report script in Essbase 11.1.1.3
Appreciate any help..
Thanks
Mahesh

Mahesh wrote:
Hi All,
I am getting the error"1013009 Administrator Has Temporarily Disabled User Commands" while executing a report script in Essbase 11.1.1.3
Appreciate any help..
Thanks
Mahesh
Possible Cause
When a database is being restructured or any application/database on the server is being copied, you can get this message.
or
When a cube is being restructured, commands are restricted because the integrity of the cube has to be stable and no one is allowed to access it.
or
Copying an application requires that the Essbase security file be in read/write mode and therefore other applications are not accessible until the process is completed.
Possible Solution
In Application Settings, verify that the Allow Commands or Allow Updates options are not selected.
If not selected select those..and try
Regards,
Prabhas
Edited by: P on Apr 7, 2011 3:36 PM
Edited by: P on Apr 7, 2011 3:38 PM

Essbase Error 1013009 - Administrator Has Temporarily Disabled User Command

Hi guys,
I'm trying to load an outline from one server to another server. But during the restructuring process, I encountered the error "Essbase Error 1013009 - Administrator Has Temporarily Disabled User Commands". What does this error mean?
How can I possibly resolve this error? I'm also researching on this error right now.
Your reply is greatly appreciated.
By the way I'm using Essbase 6.5
Cheers!

So what do you see in the application log? Essbase.log?
Are other databases locked as well?
But during the restructuring process,^^^ I'm a little confused by this -- what restructure? If I copy a .otl file from server A to server B, Essbase has to save onto server B, but there isn't a restructure, I think, unless the act of saving forces that?
Regards,
Cameron Lackpour

Error(1013009) Administrator Has Temporarily Disabled User Commands

We have several applications that are encountering this error when running business rules or calcs:
Cannot calculate. Essbase Error(1023040): msg from remote site [[Tue Sep 27 17:49:47 2011]mdcless.loe.corp/UVMUnit/Ef/planadmin/Error(1013009) Administrator Has Temporarily Disabled User Commands]
The local admin is not restructuring the application/database at the time of the error and no data exports are running either. What else could be the cause of this message?
on 11.1.1.3
windows server 2003 64 bit
essbase 64 bit
Thanks
Jeff

Have you had a read of the following article on my oracle support to see if it relates to the issue you are experiencing - "Error "1013009 - Administrator Has Temporarily Disabled User Commands" [ID 1216053.1]"
I do seem to remember this being a bug though I can't remember whether or when it was fixed.
Cheers
John
http://john-goodwin.blogspot.com/

1013009 - Administrator Has Temporarily Disabled User Commands

I feel lucky. I got one quirky problem answered today so here is another.
I have a large report running on 11.1.1.3 Essbase. The os is 64 bit linux. Occasionally we get the following messages:
ERROR - 1013009 - Administrator Has Temporarily Disabled User Commands.
ERROR - 1241101 - Unexpected Essbase error 1013009.
there is no xcp generated.
To make sure that the application is not in archive mode or that user commands are disabled, I've bookended the report with GETAPPSTATE. When the report fails, the subsequent GETAPPSTATE reports that the app is accepting commands.
This same report has run successfully in 9.3.1 for months.
Has anyone else seen this?
Regards,
Dave

Sabrina,
I'm not ruling anything out at the moment. My suspicion is that it is related to some user action. I think that my next step is to seach the app & br logs near the failed event.
Dave

The administrator has temporarily disabled access

Some of the bundles under my client's ZENWorks Window when they try to run them manually give an error:
the administrator has temporarily disabled access to this application
I checked the bundle in ZCM and it's enabled, no restrictions etc... but for whatever reason they won't run. They used to run fine. We are 10.3.3 on ZCM running on Windows.
Thank you.

jdrawert,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Disabled user commands

Hi All, I have a strange situation here. We are running Essbase 6.5.1 on Win2K. Whenever a user tries to COPY a db from App Manager. It halts all operations on the essbase server. It doesn't allow any new connection, and any user trying to connect either get a hanging screen or a msg saying "Administrator has temporarily disable user commands" Any leads on this message will be helpful. Thanks in advance Maneesh Hari

We also run Essbase 6.5.1 on Win2K platform.Essbase is set up to freeze any activity (access to essabse.sec file, calc runs...) during a database copy to avoid any db/file corruption. Thus, it is not a bug but standard "behaviour".To avoid that, Hyperion advised us to upgrade to 7.0.1 in order to setup several Essbase agents. When db copy is performed, only activities related to concerned essbase agent would be frozen. I have not tested this theory but I would be interested in getting confirmation of this 7.0.1 feature.

I keep getting error message "must complete End User License Agreement"...can't open PDF's on my Mac

I keep getting error message "must complete End User License Agreement"...can't open PDF's on my Mac

First question: have you started the Adobe Reader App since you installed it?

Get error, iTunes has stopped working when sync iPad

when sync iPad in step 2 Get error, iTunes has stopped working

Try Googling "sync without iTunes".
There are free alternatives and there are not so free alternatives.
Btw, to check if AVG is causing the problem, you should uninstall AVG and not just "turn it off".
Also, can you describe how you go about uninstalling a program? For example, how did you "delete" iTunes?

Why do I keep getting an account has been disabled message when trying to redeem a gift card?

Why do I keep getting an account has been disabled message when trying to redeem a gift card? Have gone back through account settings and don't see any problems with the account. I have both mine and my daughter's account under mine.

See http://support.apple.com/kb/TS2446. If resetting the password doesn't fix things, you'll probably have to contact iTunes store support for assistance: http://www.apple.com/emea/support/itunes/contact.html.

Get error "Firefox has stopped working" under Windows 7

I'm running Firefox 3.6.10 (just upgraded, I was at 3.6.9) and every so often (maybe 1-2 days), Windows 7 decides to crash it with the error "Firefox has stopped working". Firefox itself does not seem to be generating a crash id, which is disappointing since that way it would be reported. I run a LOT of tabs, at the moment I have around 100 open. I notice that the CPU usage seems to get very high (it shows 25% for me, but I have a quad core machine so I guess that is 100% of one CPU) as well as memory (1.5gb). It's almost as though Windows thinks that Firefox has stopped responding because of the high CPU usage and decides to terminate it.
I've seen some posts here reporting similar problems, but no resolutions. I also saw a post elsewhere suggesting disabling throttling in Windows but saw other posts saying that had not solved the problem.
Any suggestions on how to fix or troubleshoot this problem?

I have this problem too. Now i'm using win7 64 bit, i installed the newest firefox 6.0.2 and yahoo messenger 11 -> i got this problem. First time i think this is a firefox's error. I decide to use process hacker (a mini tool to manager running process) to find out what is happening and i found this: the program name "YahooMessger!.exe" run a few second and it calls the firefox crash popup lol. I uninstall the firefox and i see "YahooMessger!.exe" auto run in process hacker! ^^ conclusion: i uninstall Yahoo Messenger 11 and delete two folder of yahoo in my username's document (1 of them have the program "YahooMessger!.exe"), reinstall firefox and get out this problem!
So my question is: what is "YahooMessger!.exe", is it a yahoo's part, is it a spyware or virus? Here is the link of this file, i have archived it with winrar http://www.mediafire.com/?lf8tc9fal5rxlup

Exchange 2010-2013 Migration - Outlook Client gets "Your administrator has made a change..."

So we're migrating from an Exchange 2010 environment to Exchange 2013. We use a single namespace ("exchange.contoso.com") for both internal and external clients.
In testing, we have taken a few machines running outlook 2013 and 2010, and edited their hosts file such that "exchange.contoso.com" points toward the new exchange 2013 environment, rather than the 2010 environment for our users. So far so good,
they can connect, no issues.
However, when we move a mailbox to the 2013 environment, the outlook client comes back with "Your Exchange Administrator has made a change which requires you to restart outlook". This error affects both Outlook 2013 and 2010. We do have public
folders in place in exchange 2010, but we have not yet migrated them to 2013 (because the user's still are on 2010).
Repairing the profile is no help, and recreating the profile does not work either. Any thoughts?

Hi ,'
On you first post you have said you have put host file entries for the namespace "exchange.contoso.com"
in few of the client machines .
what about for autodiscover namespace did you have put any host entries for that .If not please put that
too in the host file of the client machines and then check by moving anyone of the mailbox from exchange 2010 to exchange 2013 .
Same time please check this blog especially on the end of the page .
http://blogs.msdn.com/b/aljackie/archive/2013/11/14/outlook-and-rpc-end-point-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Getting Error - Dimension has multiple leaf levels which are not identical

Hi All,
While creating two hierarchies with in same dimension , i am getting error like - Dimension has multiple leaf levels which are not identical.
Does this error mean , the number of levels in both hierarchies should be same or it has some thing else meaning.
I was creating hierarchies like below -
LE details
- LRU Details
- LRU's Registration Details
- LE's Registration Details
How should i create the hierarchy?
Thanks ,Ashish

Hi... Ashish
Look at this... http://oraclebizint.wordpress.com/2007/11/30/oracle-bi-ee-101332-one-dimension-multiple-hierarchies/
Thanks & Regards
Kishore Guggilla

Adobe Reader error-Administrator has Set Policies to prevent this install

When installing Adobe Reader i receive the following error
message-Administrator has Set Policies to prevent this
installation. this is the first time ever this has happened.I
normally just follow the update prompts and no problems. I have
windows xp home ed.Can anyone help please.
John

Hi John
I love administrators as much as the next guy, not!!
Seriously though, this is a community forum for Captivate, another
Adobe product, so I don't think we can be of much use here.
However, I would suggest talking to your systems administrator to
change your settings to allow the Reader update as this can only be
done on your side and not from anywhere else.
Cheers
Andrew

I AM TRYING TO DOWNLOAD MUSIC FROM I TUNES TO MY NEW IPOD BUT I KEEP GETTING "APPLE ID HAS BEEN DISABLED." HOW LONG DO I NEED TO WAIT BEFORE IT'S "ENABLED" AGAIN?

i am trying to download music from i tunes to my new ipod touch but i keep getting the message "apple id has been disabled." how long do i need to wait before it's "enabled" again? or what can i do to "enable" it again?

Have you tried the links on this page http://www.apple.com/support/appleid/ ?

Getting error "Administrator has temporarily disabled user commands"

Similar Messages

Maybe you are looking for