Getting error after enabling the Transaction in SSIS package in Windows Server 2008 R2 Standard machine
Hi,
I created a package with "Execute SQL Task and Data Flow Task". I am able to execute successfully in my server having
"Windows Server 2008 R2 Standard" Operating System.
But after enabling the Transaction in my SSIS Package I am not able to execute it. It is giving error. The same package is running in my local machine with Transaction enabled on
Windows 7 Operation System.
The error which I got in my server after enabling the Transaction is
"The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D025
"The partner transaction manager has disabled its support for remote/network transactions.". End Error "
I search with this error message in google and found some solutions in the following links
http://social.msdn.microsoft.com/Forums/en-US/7172223f-acbe-4472-8cdf-feec80fd2e64/the-partner-transaction-manager-has-disabled-its-support-for-remotenetwork-transactions
http://technet.microsoft.com/en-us/library/cc753510(WS.10).aspx
http://support.microsoft.com/kb/817064
But none of the above solution is not working. Kindly help me to resolve this issue.
Thanks in Advance.
Sridhar
Hi Sridhar,
Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical. Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
well.
Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
Regards,
Mike Yin
TechNet Community Support
Similar Messages
-
Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2
I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
RichardI thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much! -
Getting error after enabling php in httpd.conf
Hi,
I want to get php enable on the Apache web sever that is part of OS 10.6.1. I read the docs and uncommented the Load line for php in httpd.conf. Then I restarted the web server. Now when i try to access via Safari a phpinfo( ); command as part of a simple .php file, I get the following error:
Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
Fatal error: Unknown: Failed opening required '/Users/mobilemojo/Sites/phpinfo.php' (include_path='.:/usr/lib/php') in Unknown on line 0
Is there something else that has to be modified to get php module to load?
Thanks in advance!
KHi Sridhar,
Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical. Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
well.
Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
Regards,
Mike Yin
TechNet Community Support -
I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now. -
"Network Error - 53" while trying to mount NFS share in Windows Server 2008 client
CentOS | Windows 2008
I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on.
I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following:
C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z:
Network Error - 53
Type 'NET HELPMSG 53' for more information.
(IP and share name have been changed to protect the innocent :-) )
Additional information:
I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled.
I came across a
Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck.
I've confirmed that the share folder on the NFS server is readable/writable by all (777)
I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and
mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck.
As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found".
I'm lost on how to proceed with troubleshooting. Any ideas?There are usully two aspect that come to mind:
1. Syntax of mount command
2. Mismatch of NFS versions
Third reason is here
http://blogs.technet.com/b/sfu/archive/2011/11/21/getting-network-error-53-network-path-not-found-quot.aspx
Rgds
Milos -
Error on clone database, oracle 10g release 2 for windows server 2008
Hi,
OS: Windows Server 2008 X64
Oracle: oracle 10g release r2 for windows server 2008
An error occurred when creating a database, stop at last step, Screenshot:
[http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
the trace log content:
[main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
[main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
[main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
[main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
[main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
[main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
[main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
[main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
[main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
[main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
[main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
[main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
[main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
[main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
[main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
[main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
[main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
[main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
[main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
[main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
[main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
[main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
[main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
[main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
[main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
[main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
[main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
[main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
[main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
[Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
[Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
[Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
[Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
[Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
[Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.oraCheck your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
ORA-28547 : Connection to server failed, probable Net8 admin error
thanks
http://swervedba.wordpress.com/ -
Error while performing SAP Installation in HA Env on Windows Server 2008
Hello,
I am performing a SAP Installation in HA Environment on Windows Server 2008. I am at the ASCS installation step.
As per the guide before installing ASCS there are some activities to be carried out on Failover Cluster Management.
I have done all the steps except one as per the guide. I am stuck in the Add FileServer Step. In this step the guide says to go to the Dependencies tab and add the cluster disk resource to the dependencies list. It also says to add the Name:Virtual NetworkName to the dependencies list.
Now in my scenario I have 3 shared drives for SAP and I have added each of them in the dependencies list of the new FileServer. The only problem is how do I add the Name:Virtual NetworkName to this list
When I continue without giving the Network name the system issues a warning "This resource requires dependencies on instances of the following resource types or classes:Network Name. Not adding these dependencies will prevent the resource from working properly. Do you want to save the current settings anyway"
If I click on Yes and bring this resource online it fails with this error message
"The action Bring this resource online did not complete.An error occured while attempting to bring the resource 'SAPECC FileServer online'. The cluster resource could not be brought online by resource monitor."
My question is how to add the Name:VirtualNetworkName to the dependencies list of the FileServer.
Regards
Mitesh NairHi,
I have resolved the issue with the help of cluster admin
Regards
Mitesh -
Error coming while installing Cisco Prime 4.2 on Windows Server 2008 R2
Hi,
I'm trying to install Cisco Prime 4.2 on Windows Server 2008 R2. While initiating the installation, message box "Error: csv not found" appears, and the installation terminates.
Is there any csv template need to be copied at any location before hand?Are you installaing LMS 4.2.4 directly ?
Looking at the error ,it looks like ...
If yes then you need to follow the below path:
The installation path of LMS 4.2.4 : LMS 4.2 > LMS 4.2.2 > LMS 4.2.4
Thanks-
Afroz
[Do rate the useful post] -
How to set the date and time format from Windows Server 2008 R2
Hi,
I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
Yoshika04Hi,
In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
time format. For more information, please refer to:
Regional Options Extension
http://technet.microsoft.com/en-us/library/cc754496.aspx
Regards,
Bruce -
I am getting error when running the transaction F110
HI friends,
i am using the F110 transaction for transfering the cheque and EFT .
after entering the values in parameter, additionla log and print/data medium.
when i press the staus button then it gives the message as"Parameters entered"
then when i press the "printout " button and checked the box as "Start immediatly"
but it gives the message as "Payment proposal has been released on 16.10.2007 10.15.30 sec
can anybody help me.......
reward points are there for every answer
Regards
Raja.hi reddy,
go top Check register in FCHN and check where that the check number has been created with that amount.
If not go to SE38 and enter the RFFOUS_C and press execute it and enter the Payyng company code and Identification and enter all the required info and then again execute it
Then u can see with the Check print out.
Hope this helps u and let me know.
Assign the points if helpfull
Ranjit -
Error in SSIS Package in SQL Server 2008 R2
Dear All,
I am getting below error in SSIS Package.
[OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >,
>= or when the subquery is used as an expression.".
The SSIS package reads .xml file from a folder and then mapped to insert values in SQL table from there one trigger writtern on table to update other tables.
Pld guide me cause of the issue
-- Kind Regards SandeepDear All,
I am getting below error in SSIS Package.
[OLE DB Destination [31]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "The statement has been terminated.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when
the subquery is used as an expression.".
The SSIS package reads .xml file from a folder and then mapped to insert values in SQL table from there one trigger writtern on table to update other tables.
Pld guide me cause of the issue
-- Kind Regards Sandeep
Query should return only one value. Instead it is returning more than one value. Check the query result in ssms.
Thanks.
- please mark correct answers -
I have a Windows Server 2012 setup with SQL 2012 SP1 installed. I have tried to install Sharepoint Foundation 2013 and also full blown Sharepoint version...but during the wizard setup I always get 'Cannot find the object 'proc_createNewAppSiteDomainIds',
because it does not exist or you do not have permission.
The install created my db in sql 'team1p-vm' but that is it.
What am I missing?
During the install I have tried both Complete and Stand-alone as the Server Type.
When it gets to the product configuration wizard I use:
Create a new server farm
I enter my database server name: team1p-vm
Database name: SharePoint_Config
I enter my db access account
I enter a farm security settings passphrase
I use 17012 as my port number, select NTLM
I see my configuration settings...
Click Next and I get the error on task 3 of 10.
here is the dump of the application Log: At least some of it.
An exception of type System.Data.SqlClient.SqlException was thrown. Additional exception information: Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.
System.Data.SqlClient.SqlException (0x80131904): Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.Can you see if there is anything in the SQL ERRORLOG on the SQL Server that may help at the time you see this error?
Does your user account (the user you're installing SharePoint with) have the sysadmin fixed role in SQL Server?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Getting errors after changing the Database
Previously I was using a different database connection for my adf application.Now i have changed the database connection through project properties->business components. I also deleted the details of the previous connection from connection.xml file. But still i'm getting the error about the previous connection.
Please share your opinion to get rid of this problem.Try this.
1. Menu->View->Database->Database Navigator
2. Find your application specific connection.
3. Check properties of the connection, update/recreate, test the connection using Test button.
4. Menu->Build->Clean All -
Getting Error after changing the recalculation date in retropay status page
We run Retro-Notifications Report (Enhanced) - PDF and one record came with the recalculation date as 01-JUL-2009 ( Hiredate). We want his retro should be calculate from 12-Jan-2010. When we are changing the recalculation date of this employee in HRMS Super User -> View-> Retropay Status page it is giving a error like that.
Error :
You cannot update to this recalculation date for the assignment because it contains one or more elements with an earlier recalculation date. Please choose an assignment recalculation date that is the same as, or earlier than, the recalculation date of all the individual elements.
Please suggest in this case.
We are using Oracle 12.0.6.Entry or hiring date
This is date which is being posted to FI so it will not allow to change the old data
Even if you try to do so the retro will start from this date and will trow errors
Reward points -
I am facing a strange SQL exception:-
The code flow is like this:
.Net 4.0 --> Entity Framework --> SQL 2008 ( StoredProc --> Function {Exception})
In the SQL Table-Valued Function, I am selecting a column (nvarchar(50)) from an existing table and (after some filtration using inner joins and where clauses) inserting the values in a Table Type Object having a column (nvarchar(50))
This flow was working fine in SQL 2008 but now all of sudden the Insert into @TableType is throwing "string or binary data would be truncated" exception.
Insert Into @ObjTableType
Select * From dbo.Table
The max length of data in the source column is 24 but even then the insert statement into nvarchar temp column is failing.
Moreover, the same issue started coming up few weeks back and I was unable to find the root cause, but back then it started working properly after few hours
(issue reported at 10 AM EST and was automatically resolved post 8 PM EST). No refresh activity was performed on the database.
This time however the issue is still coming up (even after 2 days) but is not coming up in every scenario. The data set, for which the error is thrown, is valid and every value in the function is fetched from existing tables.
Due to its sporadic nature, I am unable to recreate it now :( , but still unable to determine why it started coming up or how can i prevent such things to happen again.
It is difficult to even explain the weirdness of this bug but any help or guidance in finding the root cause will be very helpful.
I also Tried by using nvarchar(max) in the table type object but it didn't work.
Here is a code similar to the function which I am using:
BEGIN
TRAN
DECLARE @PID
int = 483
DECLARE @retExcludables
TABLE
PID
int NOT
NULL,
ENumber
nvarchar(50)
NOT NULL,
CNumber
nvarchar(50)
NOT NULL,
AId
uniqueidentifier NOT
NULL
declare @PSCount int;
select @PSCount =
count('x')
from tblProjSur ps
where ps.PID
= @PID;
if (@PSCount = 0)
begin
return;
end;
declare @ExcludableTempValue table (
PID
int,
ENumber
nvarchar(max),
CNumber
nvarchar(max),
AId
uniqueidentifier,
SIds
int,
SCSymb
nvarchar(10),
SurCSymb
nvarchar(10)
with SurCSymbs as (
select ps.PID,
ps.SIds,
csl.CSymb
from tblProjSur ps
right
outer join tblProjSurCSymb pscs
on pscs.tblProjSurId
= ps.tblProjSurId
inner join CSymbLookup csl
on csl.CSymbId
= pscs.CSymbId
where ps.PID
= @PID
AssignedValues
as (
select psr.PID,
psr.ENumber,
psr.CNumber,
psmd.MetaDataValue
as ClaimSymbol,
psau.UserId
as AId,
psus.SIds
from PSRow psr
inner join PSMetadata psmd
on psmd.PSRowId
= psr.SampleRowId
inner join MetaDataLookup mdl
on mdl.MetaDataId
= psmd.MetaDataId
inner join PSAUser psau
on psau.PSRowId
= psr.SampleRowId
inner
join PSUserSur psus
on psus.SampleAssignedUserId
= psau.ProjectSampleUserId
where psr.PID
= @PID
and mdl.MetaDataCommonName
= 'CorrectValue'
and psus.SIds
in (select
distinct SIds from SurCSymbs)
FullDetails
as (
select asurv.PID,
Convert(NVarchar(50),asurv.ENumber)
as ENumber,
Convert(NVarchar(50),asurv.CNumber)
as CNumber,
asurv.AId,
asurv.SIds,
asurv.CSymb
as SCSymb,
scs.CSymb
as SurCSymb
from AssignedValues asurv
left outer
join SurCSymbs scs
on scs.PID
= asurv.PID
and scs.SIds
= asurv.SIds
and scs.CSymb
= asurv.CSymb
--Error is thrown at this statement
insert into @ExcludableTempValue
select *
from FullDetails;
with SurHavingSym as (
select distinct est.PID,
est.ENumber,
est.CNumber,
est.AId
from @ExcludableTempValue est
where est.SurCSymb
is not
null
delete @ExcludableTempValue
from @ExcludableTempValue est
inner join SurHavingSym shs
on shs.PID
= est.PID
and shs.ENumber
= est.ENumber
and shs.CNumber
= est.CNumber
and shs.AId
= est.AId;
insert @retExcludables(PID, ENumber, CNumber, AId)
select distinct est.PID,
Convert(nvarchar(50),est.ENumber)
ENumber,
Convert(nvarchar(50),est.CNumber)
CNumber,
est.AId
from @ExcludableTempValue est
RETURN
ROLLBACK
TRAN
I have tried by converting the columns and also validated the input data set for any white spaces or special characters.
For the same input data, it was working fine till yesterday but suddenly it started throwing the exception.Remember, the CTE isn't executing the SQL exactly in the order you read it as a human (don't get too picky about that statement, it's at least partly true enough to say it's partly true), nor are the line numbers or error messages easy to read: a mismatch
in any of the joins along the way leading up to your insert could be the cause too. I would suggest posting the table definition/DDL for:
- PSMetadata, in particular PSRowID, but just post it all
- tblProjectSur, in particularcolumns CSymbID and TblProjSurSurID
- cSymbLookup, in particular column CSymbID
- PSRow, in particular columns SampleRowID, PID,
- PSAuser and PSUserSur, in particualr all the USERID and RowID columns
- SurCSymbs, in particular colum SIDs
Also, a diagnostic query along these lines, repeat for each of your tables, each of the columns used in joins leading up to your insert:
Select count(asurv.sid) as count all
, count(case when asurv.sid between 0 and 9999999999 then 1 else null end) as ctIsaNumber
from SurvCsymb
The sporadic nature would imply that the optimizer usually chooses one path to the data, but sometimes others, and the fact that it occurs during the insert could be irrelevant, any of the preceding joins could be the cause, not the data targeted to be inserted.
Maybe you are looking for
-
When using the BerkeleyDB shared environment in parallel processes, the processes get "out of memory" error, even when there is plenty of free memory available. This results in possible database corruption. Typical use case when this bug manifests is
-
On import I want LR to set the title of the image to the filename, but I don't see any option like this. Any thoughts? Aaron
-
Preference code for intrastat/extrastat
Hi, Please provide me steps to configure preference code (PAC) for intrastat/ Extrastat repoting. Thanks Arpit
-
Why can't my iBook detect my Linksys wireless-B network?
The network works fine for all PC's, and it even works with my iBook when connected via ethernet, but the airport card can't find my network at all. For simplicity, I reset my router to the very basics so it's not using WEP. I know the card works bec
-
1GB MicroSD -card corrupted, can't be formatted
Hello everyone. I'm afraid I'm in need of urgent help regarding my new Nokia 5700 Xpressmusic I bought 2 days ago. A 1gb Nokia MicroSD memory card was shipped with it, as a freebie. Everything worked great first, but then, when I was transferring vid