Getting Error as Limits Not Defined while saving IT_0008

Hi Folks..
I am getting a message as "Limits not defined" while saving infotype basic pay our client payroll is international (it is a green colour message only) but i am unable to save the infotype entry. Request you to please advice me where to check to get resolve of this issue.
Thanks
sap_hr

just a shot in the dark... due to lack of information
i assume you use T710 for basic wage, there you should define the lower and upper limit for the payment. if these are not available for the entered payscale and level this message can occur

Similar Messages

  • Getting error "Http 404 not found" while accessing CUCM GUI..

    Hi,
    Please help um getting error "Http 404 not found" while accessing CUCM GUI. Yesterday it was running fine bt nw its showing dis error.
    Please find attached screenshot for ur referance.
    Thanks & R's
    Harish

    Hi Aaron,
    I have restarted dat service bt still the issue is persisting.
    Now its showing attached error.
    Thanks and R's
    Harish

  • Transaction launcher, get error Starttransaction is not defined

    Hi, I am trying to create a new link in the navigation bar that should call ITS and a customer created transaction in CRM. We have been doing it before and these links are working, but now trying to create another link in the navigation bar, I gets an error
    "Starttransaction is not defined". In the Handleclass created with the transaction launcher I gave it the name ZCL_filarkiv. When I did that I got an syntax error "There is a syntax error in class zcl_filarkiv". When I goes to SE80 in order to check the class, I can see several errors, I correct them and add a call in the method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW in order to call the ITS and our customerdefined class. The code added is:
            ICWEBCLIENTBORKEYPARAMETER =
      'ZARKIV'. "#EC NOTEXT
      me->set_container_object(
        iv_name        = '<MAINOBJ>'
        iv_object_key  = ICWEBCLIENTBORKEYPARAMETER
        iv_object_type = gv_bortype
    The transaction ZARKIV is working calling it directly in CRM.
    The syntax errors disappears and I can activate the class without problems. But when trying to use the link, I get the error "Starttransaction is not defined". Also other links that have been working before now gets an error "Error in the starttransaction ZCL_filarkiv.
    I do not have a clue what the problem could be. Is there a step that I have missed to do? Thank you for your help, regards Lena

    Found out that xpath.js wasn't uploaded correctly. Now that
    it is, it works!

  • Data Collection task error (Item  is not defined in Cons Chart of Accts 01)

    Dear Experts,
    While executing Data collection task, I am getting error "Item  is not defined in Cons Chart of Accts 01", What could be the reason?
    (Many Items are getting collected in target, but at the topline this error is been shown)
    Regards
    Ritesh M

    Thans Dan,
    I have gone in the program UGMDSYNC, and getting few Gls which have not assigned Cons Chart  of account.
    Kindly tell me how to assign chart of account to these GL account?

  • "Limits not Defined " error while saving IT0008 in sap hr

    Hi Experts
    While trying to Hiring an employee, infotype0008 showing Limits not defined error and not allowing to save the record. I checked table V_T510 and V_T510N. All the limits defined in right way. Please check and advice. I attached copy of screen shot for your reference.
    Regards
    Prakash Bhave

    Hi Remi
    Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
    Thanks a ton.
    Regards
    Prakash Bhave

  • I get a "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" error every time I try to open a new tab.

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/777191]</blockquote><br>
    Just like the title says, starting with Firefox 4 Beta 6 or 7, I forgot. Any time I try to open a new blank tab (sometimes even when I start up Firefox and the app tabs load) I get an error that says "JavaScript Application - Reference Error: XPCSafeJSObjectWrapper is not defined" If I close it everything works as normal again (until I open a new tab) but it is very annoying to have to do this. Is there any fix for this or is the bug just still there?

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]

  • Error: JAVA_HOME is not defined correctly - While running ant.

    I have upgraded the JDK 1.5 Update 10 to Update 14. After upgrading the ant is failing when using with cygwin.
    It's giving the below error message:
    Error: JAVA_HOME is not defined correctly.
    We cannot execute /cygdrive/c/Java/jdk14/bin/java
    The JAVA_HOME is set properly & even I am able to check java -version.
    I am using apache-ant-1.6.5 and cygwin.
    Have any one faced the same problem?
    Please let me know if you have any solutions

    Grrrr. Been having a similar problem, but with Maven2. Allow me to (hopefully) save someone the gnawing of teeth and several bald patches.
    For starters, the Maven documentation gives you a pretty clear example of how to set your PATH. This is as follows:
    export PATH=/usr/whatever/whateveragain/apache-maven-2.0.10/bin:$PATH
    Simple, eh? Note the colon before $PATH. Then, it states quite presumptuously "4) Make sure JAVA_HOME is set to the location of your JDK". However, you don't set it in exactly the same way. You set it in virtually the same way, except without the colon, like this:
    export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0$JAVA_HOME
    Note that if you get the paths wrong a couple of times, you may reset them with the unset command. So to unset JAVA_HOME you'd use:
    unset JAVA_HOME
    After which you may set it again. As is advised, you may try to set the user privileges, but they didn't seem to affect my luck at all. Hope this helps!

  • I am getting a message Internal Error Instacast keys not defined when I open one of the local tv news apps on my iPad. What do I need to do to fix it?

    I am getting an error message "Internal error Instacast Keys not defined" when I open a news app from one of my local tv stations. What is causing this?

    Hello, MommaLloyd24. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • I keep getting a "reference error:m_caFxTBobj is not defined. pleas help

    I keep getting a "reference error:m_caFxTBobj is not defined. This happens every time I go to a new tab.Please help

    Usually caused by an add-on that is either incompatible with Firefox or one that wasn't updated completely by its' developer. The former can happen when the Addon Compatibility Reporter extension is used "across the board", instead for each extension along with testing each extension.
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • TO confirmation error - item category not defined

    Hi experts,
    We have a HU/WM setup in our warehouse. While i try to confirm the TO i am getting an error 'item category not defined'?
    I am able to confirm the TO's for other orders, this is happenning for a specific group of orders which have a different item category in delivery.
    Any hints when this error will appear?
    Is there any config where we assign the delivery item category with the warehose or any other setting?
    Thanks,
    Harish
    Edited by: Harish RJ on Jan 24, 2011 7:02 AM

    I suggest have a look at OSS note 1464539 - your settings in table T184L might be wrong.
    Is it possible that the batch is determined via WM, during picking? If different batches have been determined for one item, it will cause batch split in your delivery - if settings in T184L are wrong, system cannot cope with it and may throw error message VL324.
    (sorry for duplicate, I was slow a little bit and "Sap: IN" said the same in the meanwhile)
    Edited by: Csaba Szommer on Jan 24, 2011 8:29 AM

  • Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

    Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I'm trying to load video file into CS6 I keep getting error message: 'Could not complete you request because the DynamicLink Media Server is not available.' No Idea what to do next. Help please.

    I'm using CS6 Extended. My OS is "Windows 7 home premium.
    Can no longer load video files into CS6 for edited I keep getting error message:
    'Could not complete your request because the DynamicLink Media Server is not available.'
    Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?

    Hi Mylenium,
    upfront:
    I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
    However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
    Now the real deal:
    I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
    The linked discussion is a lot younger, which is why I posted there first.
    I also put in information on the steps that I have tried and my computer specifications.
    I am experiencing this problem for a while now and hope you and jones1351may be able to help out.

  • Error: $x_ShowChildren is not defined

    The page definition page is not displaying any of the usual page objects. I'm getting an Error: $x_ShowChildren is not defined in the error console.
    Source File: http://apex.oracle.com/pls/otn/f?p=4000:4150:1692562586117686::NO:::
    Line: 39 error on the page definition page.

    Hi all, we are experiencing this "$x_ShowChildren is not defined" error on our new
    APEX 3.0 installation.
    I've already checked the notes at
    http://www.oracle.com/technology/products/database/application_express/html/3.0_fsps.html#01
    and our page really looks as depicted at point one but the refresh doesn't seem to
    do anything. We have tried to flush the cache and even change browser (IE and FF)
    but the problem is still there.
    I've checked the page source and the missing function is defined in
    /i/javascript/htmldb_html_elements.js
    The js file is visible if loaded directly but somehow the page fails with
    Error: $x_ShowChildren is not defined
    Source File: [...]/f?p=4000:4150:4106999370516652::::FB_FLOW_PAGE_ID,FB_FLOW_ID:1,101
    Line: 39
    (I've removed our address there ...)
    The strange thing is that this happens only from certain PCs but all the
    configurations (browser, network, ...) seem to be identical.
    Any idea of what might be going on?
    Thanks in advance for your kind help

  • Error "Specifed Key not found" while installing Oracle 11g R2 db

    Hi,
    I am new to installing oracle 11gr2 DB. While installing at the stage of "install product" during the process of .Copy files its throwing the following error
    *Specified Key not found
    Please help me solving this problem. Your help is much appreciated.
    Thanks in advance.

    979400 wrote:
    Hi ..
    I am getting the "Specified Key not found" while installing Oracle 11 g r2 on windows 8 (64 bit) and below is the installation log , Please help me .
    Number one - you are hijacking someone else's thread. Please read the forum FAQ. The link to that is conveniently located in the upper right corner of this very page.
    Number two - no oracle product is certified to run on Window 8. If you want to run an Oracle product, you need to use an OS which Oracle has certified for said product.
    ID: oracle.install.driver.oui.OUISetupDriver:13
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
         at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
         at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
         at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
         at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
         at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
         at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
         at oracle.install.commons.util.Application.startup(Application.java:869)
         at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
         at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
         at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
         at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
         at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
    ---# End Stacktrace #-----------------------------
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:16
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
         at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
         at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
         at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
         at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
         at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
         at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
         at oracle.install.commons.util.Application.startup(Application.java:869)
         at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
         at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
         at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
         at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
         at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
    ---# End Stacktrace #-----------------------------

  • I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

    I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.  Try to export to an external HD attached, all help would be gratefully received 

    Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

Maybe you are looking for