Getting error BEA-382051:No transaction found on current thread

Hi,
I am getting "BEA-382051:No transaction found on current thread" error while routing proxy service to business service.
I also tried adding Routing Options in routing action with quality of service as "exactly once" but still got the same issue.
I am using OSB 11.1.1.5.
Thanks in advance.

Hi,
Plz read following
BEA-382051 Error: No transaction found on the current thread
Description: There was an internal error in OSB pipeline runtime while processing the inbound request by a proxy service. The state of OSB pipeline was not expected
Action:Contact technical support
ref: http://docs.oracle.com/cd/E23549_01/apirefs.1111/e15034/Router.html
Thanks,
S

Similar Messages

BEA-382051 No Transction Found on OSB Proxy Service

Hi,
I've a mq proxy service and which has properties enabled for 1. Transaction Required 2. Same Transaction Required for Response. Also added Routing Options with QoS to 'Exactly Once' to Publish and Service C/o actions.
mq proxyQ --> local proxy1 -->localPS11 -->localPS12 -->localPS13
mq proxyQ --> local proxy2 --> localPS21 -->localPS22 -->localPS23
All these PS11,12,... have publish and service c/o for various DB operations like readBS, insertBS and updateBS.
I searched the a few threads in the forum, Anuj also suggested to enable Routing Options with QoS to 'Exactly Once'.
What I've done is I added and enabled this property to Publish/Service C/o which are calling [insertPS-->insertBS] and [updatePS-->updateBS] only.
*NOT for [readPS-->readBS] services.*
Is this causing the error? I mean,, do I need to enable for all Publish and S. c/o actions irrespective of readPS or updatePS?
I also tried with httpProxy service instead of mqProxyService
Error: BEA-382051 No Transction Found on the Current Thread
Your suggestion is highly apprecited.
Thank you
Edited by: 1002815 on May 6, 2013 7:59 AM

Hi Anuj & all,
I just want to highlight my scenario and understand what happens that case...
ListenerProxyService(mq-protocol with Transaction Enabled) is a one way(Request Type: XML and Response Type: None) and response is routed to business service which posts the message in REPLY MQ. However, publishing the response is happening on the Listener Proxy Response action of Route within Publish activity.
My question here is ... Should I enable 'Same Transactin required for the Response' and add routing options with exactly once?
[OR]
'Transaction Required' for Request ONLY and no Routing Options required for publish activity?
How does OSB handles transaction in both the cases?
Appreciate your help,
Thank you
Edited by: 1002815 on May 7, 2013 10:02 AM

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Getting error message stating no actionlist found.

Getting error message stating no actionlist found.

Please try installing from the appropriate stand alone Windows installers located here:
Installation Problems - Flash Player - Windows

When the keyboard is unplugged I get "Error 1962: No Operating system found."

I have a new Lenovo ThinkServer TS130 1105B2U. It has a Core i3-3220 and 4GB of memory. SATA 0 and SATA 1 each have a 250GB HDD configured to mirror each other using RAID1. I just finished installing Windows 7 Pro and drivers. However, I have discovered that when I try to reboot the machine with my USB keyboard disconnected I get "Error 1962: No operating system found. Press any key to repeat boot sequence." When I reconnect the USB keyboard and reboot the machine, Windows 7 Pro boots like expected. Why can't it find the operating system if the keyboard is unplugged?

This is fixed in BIOS version 20B.
You can use the following link to update BIOS from witin Windows.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/bios_ts130_51a20b.exe
The Readme is:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkservers/ts130_51a20b_windows.txt

Getting Error while saving a transaction without making any changes to it.

Hi All,
I have a page where in the advance table I add few rows and save the transaction. First time when I save it everything works fine, but when I save it again without making any changes to the fields I get following error:
"Unable to perform transaction on the record. \nCause: The record has been deleted by another user. \nAction: Cancel the transaction and re-query the records to get the new data."
In the same page if I make any changes again it allows me to save the transaction.
Please guide how we can avoid it..
I have already checked many threads related to the issue but nothing has worked. Please help!!
Any help would be highly appreciated..
Regards,
Nisheeth

Hi All,
please help!!

In F110 I getting error No valid Payment method found but i did

While doing intercompany clearance using Pay methd Y in F110 payment run in payment proposal system showing error "No valid payment method found" this is showing in vendor line item and if i am clicking customer line item showing debit bal still exit because system not picking my pay mthd Y in vendor line item which one i assigned in vendor master data. But for another vendor its posting clearing this error occur only for particular vendor. Any can help me to rectify my error.

Hello,
We were get the same error message and found that the solution was that the vendor must have an address.
In OBVU, Payment method / country, the required master record specs had Street checked on. This reqiured an address for the vendor. Once we entered an address the F110 payment run was successful for this vendor.
Rgds,
Dan

Getting error Unable to perform transaction on the record.

Hi,
My requirement is to implement the custom attachment, and to store the data into custom lob table.
my custom table structure is similer to that of standard fnd_lobs table and have inserted the data through EO based VO.
Structure of custom table
CREATE TABLE XXAPL.XXAPL_LOBS
ATTACHMENT_ID NUMBER NOT NULL,
FILE_NAME VARCHAR2(256 BYTE),
FILE_CONTENT_TYPE VARCHAR2(256 BYTE) NOT NULL,
FILE_DATA BLOB,
UPLOAD_DATE DATE,
EXPIRATION_DATE DATE,
PROGRAM_NAME VARCHAR2(32 BYTE),
PROGRAM_TAG VARCHAR2(32 BYTE),
LANGUAGE VARCHAR2(4 BYTE) DEFAULT ( userenv ( 'LANG') ),
ORACLE_CHARSET VARCHAR2(30 BYTE) DEFAULT ( substr ( userenv ( 'LANGUAGE') , instr ( userenv ( 'LANGUAGE') , '.') +1 ) ),
FILE_FORMAT VARCHAR2(10 BYTE) NOT NULL
i have created a simple messegefileupload and submit button on my custom page and written below code on CO:
Process Request Code:
if(!pageContext.isBackNavigationFired(false))
TransactionUnitHelper.startTransactionUnit(pageContext, "AttachmentCreateTxn");
if(!pageContext.isFormSubmission()){
System.out.println("In ProcessRequest of AplAttachmentCO");
am.invokeMethod("initAplAttachment");
else
if(!TransactionUnitHelper.isTransactionUnitInProgress(pageContext, "AttachmentCreateTxn", true))
OADialogPage dialogPage = new OADialogPage(NAVIGATION_ERROR);
pageContext.redirectToDialogPage(dialogPage);
ProcessFormRequest Code:
if (pageContext.getParameter("Upload") != null)
DataObject fileUploadData = (DataObject)pageContext.getNamedDataObject("FileItem");
String strFileName = null;
strFileName = pageContext.getParameter("FileItem");
if(strFileName == null || "".equals(strFileName))
throw new OAException("Please select a File for upload");
fileName = strFileName;
contentType = (String)fileUploadData.selectValue(null, "UPLOAD_FILE_MIME_TYPE");
BlobDomain uploadedByteStream = (BlobDomain)fileUploadData.selectValue(null, fileName);
String strItemDescr = pageContext.getParameter("ItemDesc");
OAFormValueBean bean = (OAFormValueBean)webBean.findIndexedChildRecursive("AttachmentId");
String strAttachId = (String)bean.getValue(pageContext);
System.out.println("Attachment Id:" +strAttachId);
int aInt = Integer.parseInt(strAttachId);
Number numAttachId = new Number(aInt);
Serializable[] methodParams = {fileName, contentType , uploadedByteStream , strItemDescr , numAttachId};
Class[] methodParamTypes = {fileName.getClass(), contentType.getClass() , uploadedByteStream.getClass() , strItemDescr.getClass() , numAttachId.getClass()};
am.invokeMethod("setUploadFileRowData", methodParams, methodParamTypes);
am.invokeMethod("apply");
System.out.println("Records committed in lobs table");
if (pageContext.getParameter("AddAnother") != null)
pageContext.forwardImmediatelyToCurrentPage(null,
true, // retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_YES);
if (pageContext.getParameter("cancel") != null)
am.invokeMethod("rollbackShipment");
TransactionUnitHelper.endTransactionUnit(pageContext, "AttachmentCreateTxn");
Code in AM:
public void apply(){
getTransaction().commit();
public void initAplAttachment() {
OAViewObject lobsvo = (OAViewObject)getAplLobsAttachVO1();
if (!lobsvo.isPreparedForExecution())
lobsvo.executeQuery();
Row row = lobsvo.createRow();
lobsvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void setUploadFileRowData(String fName, String fContentType, BlobDomain fileData , String fItemDescr , Number fAttachId)
AplLobsAttachVOImpl VOImpl = (AplLobsAttachVOImpl)getAplLobsAttachVO1();
System.out.println("In setUploadFileRowData method");
System.out.println("In setUploadFileRowData method fAttachId: "+fAttachId);
System.out.println("In setUploadFileRowData method fName: "+fName);
System.out.println("In setUploadFileRowData method fContentType: "+fContentType);
RowSetIterator rowIter = VOImpl.createRowSetIterator("rowIter");
while (rowIter.hasNext())
AplLobsAttachVORowImpl viewRow = (AplLobsAttachVORowImpl)rowIter.next();
viewRow.setFileContentType(fContentType);
viewRow.setFileData(fileData);
viewRow.setFileFormat("IGNORE");
viewRow.setFileName(fName);
rowIter.closeRowSetIterator();
System.out.println("setting on fndlobs done");
The attchemnt id is the sequence generated number, and its defaulting logic is written in EO
public void create(AttributeList attributeList) {
super.create(attributeList);
OADBTransaction transaction = getOADBTransaction();
Number attachmentId = transaction.getSequenceValue("xxapl_po_ship_attch_s");
setAttachmentId(attachmentId);
public void setAttachmentId(Number value) {
System.out.println("In ShipmentsEOImpl value::"+value);
if (getAttachmentId() != null)
System.out.println("In AplLobsAttachEOImpl AttachmentId::"+(Number)getAttachmentId());
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AttachmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_NO_UPDATE"); // Message name
if (value != null)
// Attachment ID must be unique. To verify this, you must check both the
// entity cache and the database. In this case, it's appropriate
// to use findByPrimaryKey() because you're unlikely to get a match, and
// and are therefore unlikely to pull a bunch of large objects into memory.
// Note that findByPrimaryKey() is guaranteed to check all AplLobsAttachment.
// First it checks the entity cache, then it checks the database.
OADBTransaction transaction = getOADBTransaction();
Object[] attachmentKey = {value};
EntityDefImpl attachDefinition = AplLobsAttachEOImpl.getDefinitionObject();
AplLobsAttachEOImpl attachment =
(AplLobsAttachEOImpl)attachDefinition.findByPrimaryKey(transaction, new Key(attachmentKey));
if (attachment != null)
throw new OAAttrValException(OAException.TYP_ENTITY_OBJECT,
getEntityDef().getFullName(), // EO name
getPrimaryKey(), // EO PK
"AttachmentId", // Attribute Name
value, // Attribute value
"AK", // Message product short name
"FWK_TBX_T_EMP_ID_UNIQUE"); // Message name
setAttributeInternal(ATTACHMENTID, value);
Issue faced:
When i run the page for the first time data gets inserted into custom table perfectly on clicking upload button,
but when clicked on add another button on the same page (which basically redirects to the same upload page and increments the attachment id by 1)
i am getting the below error:
Error
Unable to perform transaction on the record.
Cause: The record contains stale data. The record has been modified by another user.
Action: Cancel the transaction and re-query the record to get the new data.
Have spent entire day to resolve this issue but no luck.
Any help on this will be appreciated, let me know if i am going wrong anywhere.
Thanks nd Regards
Avinash

Hi,
After, inserting the values please re-execute the VO query.
Also, try to redirect the page with no AM retension
Thanks,
Gaurav

Uploading a CSV file and getting Error ORA-01403: no data found in V4.1.1.

I have an issue where myself and another user are unable to upload a csv file to my application using the "File Browse" page item in V4.1.1. I get the following error, "Error ORA-01403: no data found".
This function was working perfectly last week prior to the upgrade of our APEX to V4.1.1 from V3. Other users are still able to upload the csv file, so the PL/SQL behind it must be ok.
So here is where I am up to with testing.
Tested the upload using my login on my PC – Fail
Tested the upload using my login on another PC – Fail
Tested the upload using other user’s login on my PC – Success
Tested the upload using other user’s login on another PC - Success
Any help would be greatly appreciated.
Cheers,
Greg

The offending piece of code was in a block of script that I used from an online sample when I was first setting up this upload script. A colleague had the same issue in another application and rewrote the script to resolve the issue, see below.
I'm still perplexed as to why the majority of users could run it ok, and there were only 2 of us that it errored on. But now it's working for all, and I can go back to building some cool stuff in V4.1.1.00.23.
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files
where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USERID)
and id = (select max(id) from wwv_flow_files where updated_by = :APP_USERID);
-- Rewritten to the following, which works.
select blob_content into v_blob_data
from wwv_flow_files
where id = (select ID from wwv_flow_files
where UPDATED_BY = :APP_USERID
and LAST_UPDATED = (select max(LAST_UPDATED) from wwv_flow_files where UPDATED_BY = :APP_USERID));

From pl/sql table getting error - "ORA-01403: no data found"

Hi All,
i habe written package, and the spce define as -
type F761RecType is RECORD (
type F761TabType is TABLE of F761RecType INDEX BY BINARY_INTEGER;
l_F761_table F761TabType;
PROCEDURE modification1
p_F761_table IN F761TabType,
From button click of form i passed -
DECLARE
l_f761_table I743_PUC_MAPS_TREE_PKG.F761TabType;
l_counter number;
BEGIN
          LOOP
     l_counter :=l_counter+1;
          l_f761_table(l_counter).P_TABLE := :MAPS.P_table;
     EXIT WHEN      :SYSTEM.LAST_RECORD = 'TRUE' ;
next_record;
end loop;
i743_puc_maps_tree_pkg.modification1(
                                        p_F761_table => l_f761_table,
END;
Now when I take table count (l_f761_table.count) in button click in form level I am getting value; but when I try to get the count in sid the package, it giving error "ORA-01403: no data found".
Pls tell me where I am wrong ..!!
BR,
Subir

Thaks all, probls has been solved..

Getting error after enabling the Transaction in SSIS package in Windows Server 2008 R2 Standard machine

Hi,
I created a package with "Execute SQL Task and Data Flow Task". I am able to execute successfully in my server having
"Windows Server 2008 R2 Standard" Operating System.
But after enabling the Transaction in my SSIS Package I am not able to execute it. It is giving error. The same package is running in my local machine with Transaction enabled on
Windows 7 Operation System.
The error which I got in my server after enabling the Transaction is
"The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D025
"The partner transaction manager has disabled its support for remote/network transactions.". End Error "
I search with this error message in google and found some solutions in the following links
http://social.msdn.microsoft.com/Forums/en-US/7172223f-acbe-4472-8cdf-feec80fd2e64/the-partner-transaction-manager-has-disabled-its-support-for-remotenetwork-transactions
http://technet.microsoft.com/en-us/library/cc753510(WS.10).aspx
http://support.microsoft.com/kb/817064
But none of the above solution is not working. Kindly help me to resolve this issue.
Thanks in Advance.
Sridhar

Hi Sridhar,
Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical. Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
well.
Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
Regards,
Mike Yin
TechNet Community Support

Getting error when running PRC: Transaction Import

Hi Folks
Am getting an error when running PRC: Transaction Import to transfer time entries from OTL to Projects.
Has anybody encountered this before?
"MSG-20002: ORA-20002: pre_import:ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.PA_TRX_IMPORT", line 7549"
If yes, please let me know the resolution.
Kind Regards
Srini.

Pl see if MOS Doc 117395.1 (Transaction Import Interface Troubleshooting Guide) can help
HTH
Srini

Extending Array class, get Error #1069: Property 0 not found with indexOf call

I'm using inheritance to extend the Array class to create a Paths class that moves Sprites/MovieClips around on the screen. I'm getting an odd error on a call to indexOf. Here's the error:
ReferenceError: Error #1069: Property 0 not found on Paths and there is no default value.
    at Array$/_indexOf()
    at Array/http://adobe.com/AS3/2006/builtin::indexOf()
    at Paths/Next()[D:\Stephen\Documents\Flash\TossGame\TossGameFirstPerson\Paths.as:40]
Here's the relevant code in the Paths class:
    public class Paths extends Array
        private var cCurrentPath:Path;
        public function Next():Path
            var lArray:Array = this;
            var lNextIndex:int = indexOf(cCurrentPath) + 1;
            if (lNextIndex == length) lNextIndex = 0;
            var lPath:Path = lArray[lNextIndex];
            return lPath;
    } // class
I get the error at the highlighted line. cCurrentPath is populated with a Path object which is the object located at position 0 of the this object (Paths). I've tried the following variants of the Next() function:
public function Next():Path
     var lArray:Array = this;
      var lNextIndex:int = lArray.indexOf(cCurrentPath) + 1;
      if (lNextIndex == lArray.length) lNextIndex = 0;
      var lPath:Path = lArray[lNextIndex];
      return lPath;
public function Next():Path
     var lArray:Array = this;
      var lNextIndex:int = this.indexOf(cCurrentPath) + 1;
      if (lNextIndex == this.length) lNextIndex = 0;
      var lPath:Path = lArray[lNextIndex];
      return lPath;
public function Next():Path
     var lArray:Array = this;
      var lNextIndex:int = super.indexOf(cCurrentPath) + 1;
      if (lNextIndex == super.length) lNextIndex = 0;
      var lPath:Path = lArray[lNextIndex];
      return lPath;
Same error happens whichever I try. Anyone got any ideas?
Stephen
Flash Pro CS3 (Version 9.0)

Mark your class dynamic.
public dynamic class Paths extends Array

Getting error BEA-382051:No transaction found on current thread

Similar Messages

Maybe you are looking for