Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.

Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

Clean up old SID values from an InfoObject that does NOT have master data

I have a characteristic infoobject that does NOT have Master Data but it has a SID table. I assume that it is used primarily for the F4 value help. Now we have changed some of our data for this infoobject in R3 so that some of the values in the SID table will never be used again. My problem is that these values are still displayed in the F4 value help. And because the old values are very similar to the new values some users mistakenly pick the old value and then the query results come back empty.
FYI - The datasource that uses this infoobject as an attribute is extracted from R3 in a Full load each night. So there is no risk that the old values in the SID table will be needed in any Master Data/Cubes/DSOs/etc.
Is there a way to delete the unwanted SIDs from this table /BIC/SXCSAOFREG? Or is there some way to make sure that the unwanted SIDs to not show up in the F4 value help?
Thanks,
Dave

Hi David,
Goto SE14 trans --> ENter the table name as /BIC/SXCSAOFREG. Select the "Edit" radio button. Then Select "Delete Data" radion button & click on "Activate & adjust database". But be very careful NOT to click on Delete Database table(This will delete the physical database table!!!
Regards,
Pavan

Is there a way to add photos to the iPad without replacing the ones already loaded? I am trying to add photos from a folder on a computer that does not contain the other iPad photos.

Is there a way to ADD photos to my iPad without replacing the ones already there? I am trying to add photos from a computer that does not contain photos already synced to the device.

You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

Xcode is running from a volume that does not support ownership. Please move Xcode to one that does.

I have Problem, I can't install Xcode 6.1 on my iMac due "Xcode is running from a volume that does not support ownership. Please move Xcode to one that does."
I have two HD partition, First one I use for my Lion OS, and the second I just installed Yosemite since Xcode 6.1 need OS upper than lion.
Here's my HD Info.
Mac HD : Yosemite
Machintosh HD: Lion
I do try to uncheck and check when I install Xcode. Maybe I don't know where should I put Xcode.dmg when I want to install.
Thank you. Sorry bad english.

Run Disk Utility select the volume you are installing Xcode on and look at the bottom of the screen and make sure Owners Enabled: says yes.
Also make sure there are no other versions of Xcode anywhere on your system. If there are delete them all and then do a fresh download and install of Xcode, BTW why are you nor installing from the Mac App Store, where did you get the dmg from?
post back if that does not resolve the issue.
regards

I need to get some video files onto my iphone from a computer that does not have my itunes library on it

Currently I am away from home, and using a computer that does not have my main itunes library on it. I do, however, have some video files on this computer that I would like to place onto my phone for the drive home tomorrow. Unfortunately, It seems there is no way to do this without completely wiping my iPhone and replacing it with this computers empty library, as the "manage content manually" feature apparently requires me to do this. Is there any way to just add some mp4s to my iphone without erasing all of its data?.

ManSinha wrote:
What kind of computer?
On a Windows PC plugging in your phone will invoke the Autoplay dialog which also gives some options
But only if iTunes is installed on the computer and is paired as a trusted device. Which the OP does not want to do.

PLSQL - Creating a cursor for a table that does not exist

I am writing my first PLSQL program, and I have run into a problem creating a cursor.
I have a cursor that accesses a table on another database via a database link. The database link does not yet exist, so the first thing that my PLSQL does is create the database link. The problem is that I have to define my cursor before I have executed the code for the database link, and the compiler gives me an error for referring to a table that does not yet exist. How can I get around this?
Here is the basic structure of my program
DECLARE
--cursor defined here
BEGIN
--code creates database link if it does not yet exist
--code executes cursor
END

I'm still not sure I understand why the database link can't be created in advance... Once you run your code once, the database link is going to exist permanently. Why not just create it at compile time like every other object in your application?
It's sort of like trying to create a table at runtime-- if you do that, you can't refer to that table in static SQL later on. You can do everything with dynamic SQL, but that's going to substantially increase the complexity of your code.
Additionally, you have to have the CREATE DATABASE LINK privilege granted directly to the user running your code, not through a role, which seems like a huge security hole.
Justin

How do I create an executable for a computer that does not have IVI drivers

I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
Thank you,
Zach Oberman

Zach,
Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
You may be able to obtain a traditional LabVIEW driver from
Tektronix
Developer Exchange
Requesting a
driver
Other Resources
Thanks,
--Bankim

HT4915 How do I delete unwanted music from an iPad that does not show in iTunes on the computer?

How do I delete songs from my iPad that is not in my iTunes library on my laptop? The songs appear to be from iCloud, but I don't sync to the cloud. I sync to my laptop. I am not using "Match".
Mick

Welcome to the Apple Community.
Settings > Music > Show all music > Off

How do I delete unwanted music from an iPad that does not show in iTunes on the computer?

How do I delete songs from my iPad that is not in my iTunes library on my laptop? The songs appear to be from iCloud. I sync to my laptop. Show All music is off. iTunes Match is off.

Welcome to the Apple Community.
Settings > Music > Show all music > Off

Using a dll function that does not have any inputs from a VI

Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project. I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call. I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)).
Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
Thanks, Mike

Thanks for the responses guys:
I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument struct status_struct* status as only an output instead of the default of input and output.
I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface.
This is in all likely hood a case of my self being too dense and missing something fundimental ;-) I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
Attachments:
Start.jpg ‏7 KB
shurtdown.png ‏9 KB

Error while creating folder: Path is invalid because folder does not exist

Hi,
I am having an issue while creating Folders in ID, when I create folder Structure like EDI -> VENDOR -> DELL I am getting the error as below:
Path /EDI/VENDOR/DELL/ is invalid because folder VENDOR does not exist
So first 2 levels of folder structure is fine and when I create third level (DELL) I get the above error. Any idea how to resolve this or is this the limitation?
We have
Service Pack:06
Release:NW711_06_REL
Thanks,
Laxman

Hi Laxman,
Kindly try to refresh the SLD cache by going to Environment -> Clear SLD Data Cache. Make sure that the Cache Status are all in green.
Hope this would help.
Regards,
Jenny

Error After creating 2 new wagetypes.0015 40 00E7 does not exist in T512Z

Hi Experts,
I have created 2 new wagetypes.They are properly transported to Quality server.
And the amount is calculting correctly in Qual server for infotype 0015.Basis guys has transported that request to production server.
Now i am unable to find the wagetypes which i have created.When i go to pa30 and select 0015 Infotype and subtype 00E7 ,it is saying that specified subtype is invalid.When i try to create it is giving message that 0015 40 00E7 does not exist in T512Z-Check your entry.Really there is no particular wagetypes in that table.But in Quality they were there.
What could be the problem.What can i do to appear those wagetypes in Production Sysytem.
Please advice me to resolve the issue.
Thanking You.
Sai.
Reg

Dear Vicky,
If you have this entry in Q system it should be request transfer issue. I have such a cases sometimes.
I recommend go to D system, delete the record from V_T512Z and save the table. System will ask you to create a new request. Create it and put your changes into. Go out of table and come back and create the same record into it save your changes.
Release your request and transfer it again to Q and P. Hope to see the record in P system.
Otherwise do the method Okan recommended thru SM30. It works also but sometimes recreating the records are the only solution as I know
Regards,
Omid

Cannot create sales order as profit center assignment does not take place

Hi,
I am trying to create a sales order but am unable to create it as the profit center value is not picked up the value from material master.And hence, the incompletion log prevents me from creating the sales order. I seem to have done everything correct so far but somehow the profit center field (Account Assignment Tab at item level) remains empty. Instead, i can find the profit center value in "Assignment to Profitability segment".
What should i do so that my sales order picks up the profit center information ?
Thanks in advance.

Hi,
check this link it may helpful,and do search in the forum you may find an existing solution for you problem.
RFBIBL00 - issue in Batch Input Session created
Thanks
Ram

Parsing XML from a socket that does not close

Hi -
I've seen similar questions to this already posted, but either they did not really apply to my situation or they were not answered.
I have to read messages from a server and process them individually, but the protocol does not indicate the message length or give any sort of terminating character. You only know you have a complete message because it will be a well formed XML fragment. To complicate matters more, there could be extra binary data preceding each XML message. I must stress that I did not write this server, and I have no influence over the protocol at all, so while I certainly agree that this is not such a good protocol, changing it is not an option.
I'm hoping that there is a reasonable way to deal with this with an existing parser. Ironically, I don't really need to parse the XML at all, I just need to know when the current message is over but the only indication I get is that it will be the end of an XML fragment.
I do have the ability to strip off the non-XML binary data, so if there is some way that I can give the stream to a SAX (or other) parser when I know XML is coming and have it inform me when tags begin and end, or ideally inform me when it is done a complete XML fragment, that would be perfect. I'm aware of how to do this using SAX normally, but it seems that it will not function correctly when there is no EOF or other indication that the document has ended.
The best algorithm I have come up with (and it's pretty cheesy) is:
1. Start with a string buffer.
2. Append data from the socket to the buffer one byte at a time.
3. Keep checking if there is a '<' character that is not followed by '?' or '!'. (ie - don't concern myself with the special XML elements that don't close with '/>' or </tagName>. I keep them in the buffer to pass on when I'm done though.)
4. When I get my first tag with <tagName> I make note of what this tag is and increment a counter. If the tag is self closing, then I'm done.
5. Anytime I see this tag I increment the counter.
6. Anytime I see </tagName> I decrement the counter. If the counter = 0, I am done.
7. I pass on the entire message, preceding binary data, special XML tags and the fragment to the module that actually processes it.
This has a few problems. I'll have to go out of my way to support multiple character encodings, I'll have to be careful to catch all the special XML tags, and its quite CPU intensive to be interested in every single character that comes down the pipe (but I suppose this is not avoidable). Also, I just don't like to re-invent the wheel because I'm likely to make an error that a well established parser would not make.
Does anyone have any suggestions for this, or know of a parser that will deal with fragments using streams that don't close?
Thanks!

The parser expects to read to the end of the stream. If you closed the stream right after you wrote to it, I bet it would work. You wouldn't want to close the stream though would you? Try sending the string using a DataOuputStream and calling DataOutputStream.writeUTF(String) on the client side. Then, on the server side call String str = in.readUTF() (where 'in' is a DataInputStream). Then wrap the string in a StringReader and give the StringReader to the parser as it's input source.

Getting error "Cannot create a BACPAC from a file that does not contain exported data." from SqlManagementClient.Dac.ImportAsync

Similar Messages

Maybe you are looking for