Getting error "Cannot initialize Report Engine server. (RWI 00226)"

Hello All,
We have BO XI 3.1 running on AiX 5.3 and db2 9.5 with fixpack 6.
I am getting error "Cannot initialize Report Engine server. (RWI 00226)" Whenever i am trying to create a document or report.
We were not getting this error earlier. getting it since few days.
currently our web intelligence processing server is not running and showing the status as "initializing and disabled".
every time when i tried to restart web intelligence processing server,it is going to initializing status only.
I tried to enable the trace for this server but it is not allowing me to do and throughing the error " Configuration, auditing or enable/disable state change rejected; server SIA.WebIntelligenceProcessingServer is currently being initialized."
I also tried creating a new instance of web intelligence processing server, even it has also gone to "initializing" status all the time.
Environment Information:
BOXI 3.1 SP2
OS: AIX 5.3
DB: DB2 9.5 Fix pack 6
Plese help in resolving this issue.
Thanks & Best Wishes,
Sachin.

Hi,
Thanks for your prompt response.
I already tried the solution provided by you. I stopped BO server completely and restarted it again but it does not worked for me.
I have stopped the old Web intelligence processing server and created a new instance and started, but the new one has not started but going to initializing status.
It even not allowing me to delete the newly created instance, saying that it is still in initializing status.
Please suggest me if anything else i need to check.
Thanks in advance.
Best Regards,
Sachin

Similar Messages

Could not initialize Report Engine server. (Error: RWI 00226)

Hi All,
I am trying to export a webi report from a Java application. When I connect to XI R3.1 report server, it is throwing me the following error. The error is at the line
DocumentInstance boDocumentInstance = boReportEngine.openDocument(infoObject.getID());
I amable to connect to the BO server and get the list of reports but when I try to open the document after getting the service(boReportEngines.getService(...), no error at this point), it is throwing the following error. I tried to restart the report server and the CMS server, but it is still giving this error. Any pointer is appreciated.
The Report Export Failed!com.businessobjects.rebean.wi.CommunicationException: Could not initialize Report Engine server. (Error: RWI 00226)
     at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:243)
     at com.businessobjects.rebean.wi.occa.OccaConnection.<init>(OccaConnection.java:67)
     at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.createCadenzaSession(OccaReportEngineComAdapter.java:322)
     at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.initNewCadenzaSession(OccaReportEngineComAdapter.java:410)
     at com.businessobjects.rebean.occa.OccaReportEngineComAdapter.openDocument(OccaReportEngineComAdapter.java:152)
     at com.businessobjects.rebean.wi.ReportEngineImpl.openDocument(ReportEngineImpl.java:391)
     at com.businessobjects.rebean.wi.occa.WebiReportEngine.openDocument(WebiReportEngine.java:191)
     at com.infostep.ext.step.BOReportNode.openBOWebiReport(BOReportNode.java:307)
     at com.infostep.ext.step.BOReportNode.openBOReport(BOReportNode.java:860)
     at com.infostep.ext.step.BOReportTestNodeEditor$6.doCallback(BOReportTestNodeEditor.java:519)
     at com.itko.util.swing.panels.ProcessingDialog$2.run(ProcessingDialog.java:248)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$CommunicationError: Communication error occurred when trying to connect to server BOCOE.WebIntelligenceProcessingServer
cause:com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
detail:Communication error occurred when trying to connect to server BOCOE.WebIntelligenceProcessingServer
The exception originally thrown was com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
     at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.businessobjects.rebean.wi.occa.OccaConnection$CDZStubHelper.getService(OccaConnection.java:291)
     at com.crystaldecisions.enterprise.ocaframework.e.do(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)
     at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)
     at com.businessobjects.rebean.wi.occa.OccaConnection.doConnect(OccaConnection.java:121)
     ... 11 more
Caused by: com.crystaldecisions.thirdparty.org.omg.CORBA.BAD_PARAM:   minor code: 0x0 completed: No
     at com.crystaldecisions.enterprise.ocaframework.idl.OCA.OCAcdz.WICDZServer.CDZHomeHelper.narrow(CDZHomeHelper.java:109)
     at com.businessobjects.rebean.wi.occa.OccaConnection$HomeStubHelper.narrow(OccaConnection.java:359)
     ... 25 more
Thanks,
Sulagna

Hi,
Did you find a solution to this issue? I am having exacty the same problem and I can't find a solution for this.
Thanks
J. Russell

Keep getting error:Cannot connect to update server.Partial update...

I am using FF 6.0.1
I keep seeing a window pop up that says something like:
connect to update server
partial update failed
Have no idea what is going on, this has been popping up for quite awhile. When I chose the RETRY button, it sits there and the long bar that shows the progress never fills in..
Thank u for any help
Carla

If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup
If files already have been downloaded then remove the files in the updates and updates\0 folder.<br />
You can delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
* http://kb.mozillazine.org/Installation_directory

When i login to icloud form windows 7 Home premium PC, I get error - Cannot sign in due to server error

When i login to icloud form windows 7 Home premium PC, I get error - Cannot sign in due to server error

You may have to follow the slightly more detailed steps in whichever of these two applies to you.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Rebooting into safe mode may be needed to delete any folder the instructions say you should remove. You may also find this Microsoft Fixit helps to remove stubborn components. It has taken some people several attempts to completely clean iTunes and supporting software before they have been able to successfully reinstall it.
tt2
Message was edited by: turingtest2

Getting error while installing reporting servcies on existing sql server 2012.

Hi Expaerts,
sql 2012 sp1:
getting error while installing Reporting services on existing sql server. at final step
Error on scren: install_rsharepoint_cpu64_action : roll back , rolling back action.
error on popup windows: ' one or more files required to restore your computer to its previous state colud not be found. restoration will not be found.
Thanks in advance.

Hello,
Please help to collect the useful log information while install SQL Server Reporting Services. Here is the article for your reference, please see:
Navigating the Setup Logs when you install SQL Server 2012 Reporting Services:
http://blogs.msdn.com/b/jtarquino/archive/2012/03/14/navigating-the-setup-logs-when-you-install-sql-server-2012-reporting-services.aspx
Regards,
Elvis Long
TechNet Community Support

Getting error 'Cannot open your default e-mail folder' in Exchange server 2010? what are common causes?

I'm getting error
'Cannot open your default e-mail folder' when try to access my email account on exchange 2010? Why I am getting this error? Is there any particular reason? And how can I manually fix it? plz suggest!!

Hi,
Some questions:
1. Can you open your account via OWA?
2. Can you configure your account on other user's computer?
Try disabling any 3rd-party firewall or AV programs, make sure no proxy applictions or settings.
Thanks,
Simon Wu
TechNet Community Support

Logon balancing error:cannot connect to message server (rc=9)

Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
Vikram

Check OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
    Error: service 'sap...' unknown
    Component NI (network interface), ...
    rc = -3, module ninti.c, line 463
    Detail NiPGetServByName: service 'sap...' not found
    System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
      %SystemRoot%\system32\drivers\etc
is not translated to
   c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger.

Cannot initialize SecurID client-server communications

Hi!
I've installed RSA/Ace Server on a machine where iPortal is running too. The path to ace server's config files is /opt/ace/data. We've configured SecurID Server Identifier Name as "Server000". We don't really know what this means, so we didn't change it.
We've also followed the troubleshooting guide found in iPortal's Admin docs (telnet the config and helper's ports), and mimmic the portal procedures. However we get exactly the same error: cannot initialize client-server communications.
We've also installed 2 Unix agents on 2 differente IP's. What kind of agents must be configured for authentication to work ?
What can be causing this ?

I've experience to connect the ace server with portal server. The configuration is very simple and I think most of the setting in your portal is correct. One thing you should make sure is to config the portal server machine as a client to the ace server and it work. (In your case, it is same machine).
Clive Chan

Error: "Cannot access the web server" with BlazeDS Turnkey

Help! I'm new to Flex and BlazeDS and Eclipse. I was trying to setup a Flex Project using a BlazeDS/Tomcat server running from Eclipse on Windows XP per the example in flexbandit.com/archives/55#comment-269 and in (www.infoq.com/articles/blazeds-intro).   I am NOT using the Eclipse Flex plug-in. I'm using Flex Builder for the Flex code.
Here's what I've done:
I installed BlazeDS and tested http://localhost:8400 - That worked.
I setup Tomcat in Eclipse. - That seemed to work.
I created a Dynamic Web Project in Eclipse - That seemed to work.
I created the bare-bones BlazeDS Configuration under the Eclipse project and then created a basic HelloWorld java class.
I added the destination in the “remoting-config.xml” file found in the c:/projects/workspace/ReportGenTool/WebContent/WEB-INF/flex” directory:
<destination id="HelloWorld">   <properties> <source>HelloWorld</source> </properties> </destination>
When I started the application server by clicking on the server's green play button in Eclipse and then tried to open localhost:8400/ReportGenTool, I got the 404 error : The requested source (/ReportGenTool/) is not available which according to the instructions is fine.
Next I created a Flex Project, but when I try to validate the new Flex project configuration, it gives me an error "Cannot access the web server. The server may not be running, or the web root folder or root URL may be invalid."
When I validated the server was running after setting up the BlazeDs Turnkey, I saw the BlazeDS page.
Now when I bring up http://localhost:8400 I get:
      Directory Listing for /
      Apache Tomcat/6.0.14
My eclipse project is named ReportGenTool and I've overwritten the WebContent directory with the META-INF and WEB-INF directories from the BlazeDS installation (C:\blazeds\tomcat\webapps\blazeds). According to Eclipse the server is running.
My Flex project is named ReportGenTool and is located in another directory away from the Eclipse project directory.
     My root folder is: C:\Projects\workspace\ReportGenTool\WebContent
     Root URL: is http://localhost:8400/ReportGenTool/
     Context root is: /ReportGenTool/
Any idea what might be wrong? What didn't I configure that needs to be configured?
Thanks in advance.

This is not working because your router has a direct to your web server that is not through the outside interface which is needed for nat to occur, for this to work you need to setup a loopback interface as nat outside and policy route traffic to there for your server traffic
Bu if your server is internal why do you need nat at all? Can you not use bind with views that might be simpler
M
Sent from Cisco Technical Support iPad App

BEx Error: Cannot find workbook on server

Hi,
In the BI Production system, I am getting the following error "Cannot find workbook on server" when I try to create and save a new workbook. BI Development seems to be working fine. Could you tell me why this is happening, and how I can fix this?
Thanks
Edited by: Davy Dave on Nov 4, 2008 1:54 AM

Hi Dave
Can you share how you solved this problem?
Brgs, Martin

Error: Cannot connect to SFTP server ; channel is not opened

Hi PI Gurus,
Sender SFTP CC is getting error:
Error: Cannot connect to SFTP server. channel is not opened. (Software version: 3.0.23)
Can anyone guide me, what this error means 'channel is not opened'
Is the issue is at SFTP server location?
Regards,
Krishna Chauhan

Hi,
Now the error has changed:
Session.connect: java.net.SocketTimeoutException: Read timed out
I have increased the pooling interval to 1 Hr from 1 Min. Waiting for the next pooling interval result.
Guide me if I am heading right.... or anything else needs to be done.
Regards,
Krishna Chauhan

Connection Error, cannot connect to game server

I Just updated to iOS 8.1. When I tried to play WordRoll I got an error message, Connection Error, Cannot connect to game server.
ave researched some answers and have tried several, log out then soft reset, delete app and reinstall, reset wireless, nothing seems to work.

I'm not sure. Prior to last Wendesday our net connection was fine, but from Wednesday evening it's been decidedly flakey during the evenings
Oh & I'm using a HH2 & am on Total Broadband option 3. I've also tried the Leatrix Latency Fix (several months ago) & have turned off the router for several mins (on Thursday evening). I've been able to connect again to the servers this morning (as I did yesterday morning). Here's the pathping (sorry for it being an image, I can't work out how to copy & paste from the dos box & don't really want to copy it out), my HH's saying I'm getting 7,616kps down & 448 kps up, Speedtest.net's saying 6.34Mb/s down & 0.38Mb/s up (now).

Jabber is unable to register through expressway (Error:Cannot communicate with the server)

Hello Experts !
I am getting below error while trying to login in jabber through expressway . Please help me to fix this issue
Attached is the file .
(Error:Cannot communicate with the server)
Regards;
KV

Ok, let's clarify, what u have (correct me, where I am wrong):
1. We assume,that outside server's config is okay (there are only collab_edge srv for outside domain);
2. Traversal Zone is up (everything is okay with certs, IM&P nodes,CM are added);
3. Both domains (inside/outisde) are created on E/C and properly configured;
4.Inside DNS server has has srv records (cuplogin,cisco-uds) for both domains:outside,inside;
If yes, then you need to reset jabber, make "ipconfig /flashdns" on client, flash dns on E/C.
Start logging with packet captures and tries to login. After that, start checking from packet captures: client, E/C. Try to search for DNS lookups, if evry node tries to find appropriate server (client->E, C->IM&P) .
Regards,
Kirill

I am getting error "The connection to the server was reset while the page was loading" whenever i am trying to view one perticular page asset?.

Hi Experts,
i am getting error "The connection to the server was reset while the page was loading" whenever i am trying to view one perticular page asset. i am directly view page asset through contribute editor. Please tell me what is the issue.
Thanks
Satya

Hello.
Can you provide more details? Is there more information in the logs (what's the stacktrace)? What version are you working with?
Regards,
Raul.

Getting error "cannot open" when playing Videos purchased on itunes.

I'm trying to stream videos from my PC to my iPad 2 using the "Videos" app and i keep getting error "cannot open" on any video that I try to play that I purchased through iTunes. Other videos I added that werent purshased through itunes play fine however. Can anyone help with a solution? My iPad is on 5.0.1 if that helps.

I'm getting this error suddenly. I used to be able to stream purchased movies just fine, and now it simply says, "Cannot open." With movies I ripped from my DVDs, they will play just fine, but movies purchased from iTunes give the error every time.
I know I don't have any odd characters in my name like mikesoderstrom had and I haven't changed any account details since the last time it was working a few weeks ago. The only major change I can think of is upgrading to iTunes 11.
My iTunes account says that both my Mac and my Phone are still authorized. Maybe I should try deauthorizing all anyway, but I'd rather not deal with the hassle of re-authorizing, especially if it didn't work for someone who tried it already.
I have no problems with downloading/updating apps, just with Home Sharing purchased movies.

Getting error "Cannot initialize Report Engine server. (RWI 00226)"

Similar Messages

Maybe you are looking for