Getting Error: cluster ip address not added to tcpip properties
I have 2 2008 R2 physical servers on the same subnet and they have been using NLB for the past 1.5 years. We had a firewall issue and I took one of the servers out of the cluster to do testing, while the other main server (priority 1) was left serving
up the virtual IPs. The main server continues to work properly.
The servers have 2 NICs, one for NLB and one just for regular traffic. The NICs also have their own IP addresses and then there is a cluster IP and 2 virtual IPs.
Error:
When I try and add the second server to the cluster, I first connect to existing cluster which works fine. Then I do a Add Host to Cluster, and type the name of the server and select the NLB NIC. It sees the other server and it seems to start
the process, however soon after the NLB NIC goes to having internet access to a "enabled" state and the gateway gets taken out of the settings. I try to add it back, but as soon as I get out of the settings it disappears again. NLB manager
tells me: cluster ip address (192.#.#.#) not added to tcpip properties. It lists this error 4 times, once for each IP (2 virtual, 1 cluster, and then once for the dedicated NLB NIC IP). I have also tried adding all virtual IPs to the NLB NIC's
settings and still same exact error. Registry: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces -even reg looks good.
Any help would be appreciated. If I can't get any resolution my next step is going to be to delete the NLB cluster on the main server and recreate it....but this requires downtime and got to make sure it comes back up!
Hi,
You can find out the log of the event, then refer the following KB to future troubleshoot.
Network Adapter Functionality
http://technet.microsoft.com/en-us/library/cc726411.aspx
More information:
Dual-NIC NLB Configuration with Windows Server 2008 NLB Clusters
http://blogs.technet.com/b/networking/archive/2008/11/20/balancing-act-dual-nic-configuration-with-windows-server-2008-nlb-clusters.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
Verizon signal is strong but get error message "Ipad is not connected to the Internet" When I try to use Safari.
Wireless works but my Verizon account does notSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help
See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities -
I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.
One thing that might help.
1. open itunes preferences from the edit menu and click on the devices tab.
2. check the box to disable syncing for iphones connected to itunes and click ok.
3. Then click the button to reset sync history.
4. Now click ok to close the preferences window.
5. connect the iphone to itunes and go to the info tab.
6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
7. then click apply on the bottom right of itunes.
This will overwrite any events on the iphone, including any events that has become corrupted.
Hope this helps -
I have a LV 8.5 VI that controls only an agilent spectum analyzer. The agilent VIs call DLLs rather than SCPI commands. I created an application and an installer to load on a non LV machine and ran setup which was successful. When I run the EXE I get "error code 3: Could not load front panel" for each of my agilent spectrum analyzer VIs. I have to click "OK" about ten times, once for each VI. (My executable runs fine on all machines that have labview 8.5) The front panel does load with a broken arrow. The errors listed when the arrow is clicked for all of the Agilent VIs state: Missing subVI AGE444xInitialize.VI (or close.VI or read.VI etc.)
There is an AGE444x32.DLL in the data folder with the EXE file so I included as support both the DLL and all of the agilent drivers in the application build. Still no luck. I have built the application and installer about 6 times in various forms. I NEED AIR SUPPORT.
Unfortunately I do not have access to the internet at my jobsite so bear with me.
RobHi V-rob,
I'm glad to hear the executable is working now that NI-VISA is installed. Thanks for posting the solution!
Jennifer R.
National Instruments
Applications Engineer -
Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?
Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086
-
im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help
Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David -
trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Getting error logical file name not maintained adequtely
Hi,
when i execute a z report and press the download botton getting error logical file name not maintained adequtely,see long text.
Below code i wriien. Please somebody help..
DATA: lt_rows TYPE lvc_t_row.
CASE e_ucomm.
WHEN 'DOWNL'.
Determine and construct OS specific file name *
PERFORM get_file_name_for_os.
in the above perform , i wriien
FORM build_file_name USING pf_os
pf_with_file_extension
pf_param_1
pf_format
pf_fname.
DATA: lf_para1(20) TYPE c.
pf_param_1 hold the materialnr with leading zeros not prefered in *
download file name *
WRITE pf_param_1 TO lf_para1.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
logical_filename = 'Z_MATERIAL_BOM_FILE'
operating_system = pf_os
parameter_1 = lf_para1
PARAMETER_2 = ' '
PARAMETER_3 = ' '
USE_PRESENTATION_SERVER = ' '
with_file_extension = pf_with_file_extension
USE_BUFFER = ' '
IMPORTING
EMERGENCY_FLAG =
file_format = pf_format
file_name = pf_fname
EXCEPTIONS
file_not_found = 1
OTHERS = 2
Error handling.
CASE sy-subrc.
WHEN '1'.
MESSAGE e014(ba) WITH 'Z_MATERIAL_BOM_FILE'. "error message i am getting LEAVE.
WHEN '2'.
MESSAGE e213(ky) WITH 'Z_MATERIAL_BOM_FILE'.
LEAVE.
ENDCASE.Hi.
In file txn,
click on "Logical File Name Definition, Cross-Client" from the left.
Then click position and check for your logical file name.
If you dont get it, it means you need to create it. You can click on New Entries to create.
Thanks
Mani -
Getting error in Hiring " Partner not assigned to applicant".
Hi
Getting error in hiring " partner not asisgned to applicant". Is any thing missing from erecruitment system. Any infotype not getting updated etc. Kindly provide any solution to this? We have checked the relationship of NA-CP-BP and it has unique ids. We are finding 2 person holding the perner in production because of this. Attach is the screen shot.
Regards,
Sarvada Redkar.Hi Sarvada,
The error message is strange - where do you get that exactly? Any additional information for that in transaction SLG1?
Regards,
Nicole -
When trying to sing into the Itunes Store I get error message "Itunes store not availble at this time. Please try again later" I've updated everything and doesn't help. Anyone have any ideas?
Send a PM(Private Message) to ATT Uverse Care.
-
In MIRO i am getting error message " vendor is not invoicing party in STO
Dear All,
i create one STO MM. This is plant to plant transfer STO. i entered few conditions. for this conditions i mentioned Vendor in condition detail.
at the time of MIRO i am getting error message vendor is not invoicing party in PO ( STO).
i checked the vendo master. all partner function are maintained.
so please guide me
Thanks
h shahHI,
Check u had done the below steps,
Create STO and input the freight/delivery costs in PO and assign the Transporter or Freight Vendor to the conditions by clicking on "Details" button in Conditions Tab
For that you have to do following settings;
Go to SPRO > MM > Purchasing > Purchase Order > Define Document Types > Here select "UB" and copy to a new PO Doc type.
In SPRO > MM > Purchasing > Conditions > Define Price Determination Process > Define Schema Determination > Determine Schema for Stock Transport Orders > Here assign Calculation Schema "RM2000" i.e. Stock Transfer Document to Schema Grp Pur. Org, STO Type (New One) and Supplying Plant.
Calculation Schema "RM2000" has condition type P101 which will pick up the MAP of supplying plant automatically during creation of STO in ME21N ("Conditions" Tab).
You can create new freight/delivery cost conditions in M/06 and assign in pricing procedure "RM2000" in M/08
After STO, do Outbound delivery in VL10D, then GR in MIGO and then go for LIV w.r.t. STO in MIRO
Here select "Planned Delivery Cost" and do necessary procedure.
Regards
KK -
Trying to copy photos in folder on desktop to a flash drive but keep getting error that there is not enough free space when there is. I read to delete trash with the flash drive in but that still doesn't work. Help!!
How is the flash drive formatted? Open Disk Utility (Applications>Utilities) and see how it's formatted - that might be the problem.
Clinton -
Im getting error 16 and do not have adobe pcd, what can i do??
im getting error 16 and do not have adobe pcd, what can i do??
Error 16 http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
-including DW039 https://forums.adobe.com/thread/1500609 -
Getting Error "Apple ID does not have permission to access iTunes Connect" while logging to iTunes. Please help me in this regard
Regards,
AmarSee the "More Like This" section over there ===============>
In the future, search before posting.
Maybe you are looking for
-
Can I add a new trigger to the beginning instead of at the end of a blank composition widget?
Hi guys, I am creating a photo gallery page using the Blank Composition widget. I want to be able to add new content regularly by adding new photos to the top (beginning) of the gallery so my newest photos show at the beggining of the gallery. Curren
-
Apple TV wireless module - install in a macbook?
Hi - Just in the process of sorting out my AppleTV which I picked up today and have a question over the wireless card that is in it. Basically - I have a Rev A Macbook and am wondering if I can take the wireless card out of the ATV and fit it to my m
-
HT4946 how do i unlock my iPhone when its locked in the itune plug in mode?
how do I unlock my iPhone when it is in the itune locked mode for updates, i powered out when i was updating
-
R: (forte-users) How can I write numbers with 7 digit in aListView?
-
I've come across a bug that's occurred twice to me in the past 3-4 months. When exporting a sequence out of Premiere Pro, the resulting file loses some of its audio. Here are the details: A section of 10 minutes of audio towards the end of the projec