Getting error code -1967353908 when trying to read a modbus address

I'm using the Modbus I/O server in LabVIEW 2010 to communicate with a Kohler generator.  A vendor was able to supply with the the Modbus address mapping so that I'd know what addresses correspond to what IO points.  One of the addresses is 40126 which I create in the Modbus I/O server as 400126 since it requires six digit addressing.  Well, that worked but only temporarily.  Not too long after I begin trying to make sense of the values read, the shared variable begins showing error -1967353908.  The description for this error is "The specified data item address is not an allowable address for the Modbus slave device. Refer to the documentation of the Modbus slave device for information about supported addresses."
What I don't understand is why it works one minute and stops working the next.  Also, I know that the Modbus server itself is not erroring b/c in my VI there are other boolean bit addresses that continue to report good data.  Can anyone assist in helping me figure this one out?  Thanks.
Ryan R. 

Ryan,
This error may occur with certain Modbus slave devices, because the I/O actually queries for a range of addresses, some of which may not exist on the device.  To remedy this issues, reduce the number of Holding Registers in the Advanced Settings of the IO Server to 1.
Let us know if you have further trouble!
Drew T.
NIC AE Specialist

Similar Messages

  • Why am I getting error code 1402 when trying to update adobe reader 10?

    Why am I getting error code 1402 when trying to update adobe reader 10?

    Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader

  • Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

    Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

  • HT1918 why do I keep getting error code 5002 when trying to make a purchase? Has been almost a week now!

      Why do I keep getting Error Code 5002 when trying to make a purchase from the Itunes store? I am using Vista Home edition> havent had any problems before. This has been going on for a week.

    This alert is often the result of an issue with verifying your billing.
    Quit iTunes.
    Open iTunes.
    Test the issue.
    If it persists, sign in to store.apple.com using your iTunes account
    Click on Change account information
    Modify or remove your credit card information.
    Click Continue.
    Test the issue.

  • I keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    i keep getting error code 3212 when trying to connect to home sharing.. i am connected to the internet

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Am suddenly getting error code 3250 when trying to download certain podcasts...not all, just some. How can I fix? Help.

    Am suddenly getting error code 3250 when trying to download certain podcasts...not all, just some. How can I fix? Help.

    I am getting the same error, and have been, since the last iTunes update.     Driving me crazy, as some podcasts download without issue, others won't download at all, and get the 3250 error code.

  • I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

    I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

    Same problem. I make playlists on Ping so the listeners of my podcast can easily download the songs I talk about. But for **** near 2 weeks now I can't edit a playlist or add a new one. When are they gonna fix this?

  • Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    Keep getting error code 2048 when trying to open wmv files, says realplayer cannot open with the installed version of Quicktime, any suggestions?

    wmv is a Windows Media format.  I don't know why Realplayer is coming into it since that deals primarily with Real format files and maybe a few generic formats.
    You need
    Free Flip4mac QuickTime player components - http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
    After installation a new Flip4Mac pane will appear in System Preferences.  Make sure you set the boxes to ensure that it will play WMV files in Quicktime.
    or play the files with VLC
    VLC media player - http://www.videolan.org/vlc/ - general media player that plays just about anything.
    While you're at it you might install:
    Perian codecs for Quicktime - http://www.perian.org - plugins to add functionality to Quicktime for playing additional audio and video formats
    Quicktime audio problems, Perian, VLC - http://discussions.apple.com/message.jspa?messageID=9013669 - read note about uninstalling prior DIVX support before installing Perian.
    Perian doen't do WMV but it's handy to get many things to play in Quicktime.
    Note, if these are protected WMV, nothing on a Mac will play those (unless you also have Windows installed).

  • Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5)

    Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5) I have disabled my security software, but that doesn't help.  Any ideas?

    http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html

  • Getting error code 8003 when trying to empty trash, lots and lots of stuff in there but it won't let me empty the trash.

    getting error code 8003 when trying to empty trash, lots and lots of stuff in there but it won't let me empty the trash.

    Thomas...
    Try Trash IT for Mac >  http://www.macupdate.com/app/mac/8214/trash-it!
    It helped users with the same issue here >   https://discussions.apple.com/message/16995454#16995454

  • I get Error code -8003 when trying to empty the trash.  I need to free up this space.  Any suggestions?

    I get Error code -8003 when trying to empty the trash.  I need to free up this space on my laptop ASAP.  Any suggestions?

    Try this Discussion...
    https://discussions.apple.com/message/21112050#21112050

  • I am getting error code 0x8002006E when trying to burn a DVD

    Hi, I am running the latest Lion update, on my MB Pro, and keep getting the error code 0x8002006E when trying to burn a DVD. Could this be a dirty lens issue in the drive. I see that many others have had the same problem, but relly cant seem to find anyone that has a solution that works.. Help

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • I'm getting error code 8003 when trying to empty trash.

    I am getting an error code 8003 when trying to empty my trash. Don't it anywhere I've looked.

    Read this and possibly the solution is there.
    http://forums.cnet.com/7723-6126_102-365518.html

  • Keep getting error code -50 when trying to burn a disc. how do I solve this?

    Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

    marobinson58 wrote:
    keep getting the error code 0x8002006E when trying to burn a DVD.
    It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
    "The burn failed because of a medium write error."
    Could this be a dirty lens issue in the drive.
    I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

  • Getting error code 109 when trying to open pdf from an email i received

    Hi , Im getting error cod 109 when I try to open a pdf from a contact. all other pdf open fine

    I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
    I do not have Illustrator to open and re-save as the forum discussion indicated.
    Is there another way to open a PDF with this error code?  I work with Quark, Photoshop and Publisher
    MartyMag22

Maybe you are looking for

  • Issue with - Consume Web Services in a Messaging Only Scenario

    Hello, I am trying to consume a Oracle - SOA web service in BizTalk. 1. I followed the below MSDN post, http://msdn.microsoft.com/en-us/library/aa560545%28v=bts.70%29.aspx but I am getting "The custom tool 'BtsDiscoCodeGenerator' failed." error. 2. T

  • IWeb site in multiple languages

    Making a site in iWeb is very simple, but what about a site where the end-user chooses his language? Standaard buttons for the slideshow, etc... are translated to the developer's language. While it is possible that I want a page where the language is

  • Do we have any Event Driven functionality in Biztalk

    Hi, Do we have any in-build event driven functionality in Biztalk? time-bound like. Few scenarios: 1. If orchestration is running more then 5 mints then it should be alerted to admin. 2. Alert need to be raised if bulk of messages are suspended. Than

  • Server-side bitmap manipulation

    In AS3 it's possible to create new images from a bitmap source using bitmapdata and matrix. Is the same possible server-side on FMS3? Why? We want to load only the interesting portion of a big source image, instead of first loading the whole thing an

  • Activation apple id

    Hello, I turn to you for help! except you no one will help! acquired a good phone, really like IPhone 5! Less than one year of use the phone !!! And after the upgrade is needed apple id, admission to the old mail lost !!! Since I am the legal owner o