Getting Error code -2130771961 while Discovering Cross platform server from SCOM 2012 r2.

Below is the Error
Unexpected DiscoveryResult.ErrorData type. Please file bug report.
ErrorData: Microsoft.SystemCenter.CrossPlatform.ClientLibrary.Common.SDKAbstraction.TaskInvocationException
Task invocation failed with error code -2130771961. Error message was: Creation of module with CLSID "{ED8C18C7-FEF4-488D-AAAF-830366BF0B40}" failed with error "Illegal operation attempted on a registry key that has been marked for deletion."
in rule "Microsoft.Unix.HostEntryResolution.Task" running for instance "Linux Resource Pool" with id:"{7337E4AE-136A-1099-B024-2F4633B1AE1A}" in management group "pslmgmt".
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.SystemCenter.CrossPlatform.ClientActions.DefaultDiscovery.InvokeWorkflow(IManagedObject managementActionPoint, DiscoveryTargetEndpoint criteria, IInstallableAgents installableAgents)
can some one please help me ?

Hi Pandit,
Have you tried restarting the SCOM service on the management server that you are performing the discovery on? Refer below articles for more information.
http://social.technet.microsoft.com/wiki/contents/articles/4966.troubleshooting-unixlinux-agent-discovery-in-system-center-2012-operations-manager.aspx
http://www.systemcentercentral.com/forums-archive/topic/scom-2012-r2-discovery-was-not-succesful-for-solaris/
Thanks,
Janaka
Janaka Rangama MCT MIEEE MBCS (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable.)

Similar Messages

TS1424 I get error code 1009 while trying to download an application from app stor

I get error code 1009 while trying to download an application from app storp

You will need to do what it says, contact iTunes support. Click the Support tab above, then the Get Started link in the Contact Apple Support area and you'll be guided.
Regards.

Error code :d0000029 while purchasing Cross court tennis 2 App in lumia

Error code :d0000029 while purchasing Cross court tennis 2 App in lumia , I tried so many times But it is not yet solved. Trial version is working fine, When i tried to buy full game at last movement it is returning error as d0000029

hi
could you go to settings->email+accounts and check if the Microsoft account is correct(does not require attention), and log on to
www.xbox.com and then scroll to the bottom select terms of use and accept the terms. Restart the phone and try to download the game again
Joseph Ndlovu

I am getting Error code : 50 while installing update on CC

I am getting Error code : 50 while installing update on CC@

Please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve your current error.
Regards
Rajshree

Getting Error Code U44M1P7 while upgrading, how do I correct?

Getting Error Code U44M1P7 while upgrading, how do I correct?

Which product's update you are trying to install?
Is it from Creative Cloud or perpetual?
Please check following if you are having Creative Cloud.
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

Getting error code 0xC0000005 while installing windows 8.1 x64

Please help me..
I am getting error code 0xC0000005 while installing fresh copy of windows 8.1 x64
When the installation process arrives at 87% every time I get the error code saying that installation can not be done.
I can not install windows 8.1 x64 version on my laptop.
please tell me how to solve the problem and install windows 8.1 x64 version on my laptop.
I tried with dvd-rom and usb as well, but the result is same..just stuck at 87%...can not be installed....
how to overcome it...please...
This question was solved.
View Solution.

Hi there @Achintya-only
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
Please let me know what you find.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Keep getting Error Code 12 while attempting to use VXI-8360 ExpressCard

Using Dell XPS M1530 laptop running Win XP SP3. Everything ran great with same hardware back in September 08. Now I am getting Error Code 12, "This device cannot find enough free resources that is can use. (Code 12)". I have tried disabling other devices in my laptop like the Broadband card and the Media Slot with no symptom changes. Is there a better way to understand what is going on and to get my computer back to working with the MXIExpress card?
Solved!
Go to Solution.

rhoover17,
Are you getting this error in Measurement & Automation Explorer, or in the windows device manager? If the device shows up correctly in device manager as a PCI-PCI bridge but is having issues in Measurement & Automation Explorer, it may be best to try resetting the Measurement & Automation Explorer database. This can be done by:
1. For MAX 4.1 or earlier, navigate to the folder found at: C:\Program Files\National Instruments\MAX
For MAX 4.2 in Windows XP and 2000, navigate to the folder found at:
C:\Documents and Settings\All Users\Application Data\National Instruments\MAX\Data
2. Rename the Data folder to Data1. If you cannot rename the folder, go to the Windows Task
Manager and end the process called nimxs.exe and then go back and rename the folder.
3. Now navigate to the directory \Windows.
4. Delete the pxisys.ini and the pxiesys.ini if using MXI express.
5. Restart the PC and launch MAX. This will cause MAX to find the installed devices again and also recreate
the pxisys.ini and pxiesys.ini, if MXI express used. Now you should be able to identify your chassis without error in MAX.
If this does not work, I would encourage you to try using the MXI card in a different PC if you have one available, just to make sure that this isn't an issue with the card itself. You also may want to have a look at the thread at http://forums.ni.com/ni/board/message?board.id=270&message.id=4887&requireLogin=False, as it deals with a very similar issue that ended up being just the MXI cable plugged in backward, but good troubleshooting steps were still discussed.
Eric K
Applications Engineering
National Instruments

I keep getting error code 2330 while trying to update my itunes. I'm not able to udate, repair or uninstall., I keep getting error code 2330 while trying to update my itunes. I'm not able to udate, repair or uninstall.

I'm getting error code 2330 when I try to update my itunes. I'm not able to update, repair or uninstall!!!!

Hi I was having the same problem using ADE 2.0.
I contacted the LiveChat support (link button did not show when using Firefox 31), which gave me this link. http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
After I edited the Registry and then restarted ADE I was able to ReAuthorize my machine. Hope this works for you.

Getting error code 109 when trying to open pdf from an email i received

Hi , Im getting error cod 109 when I try to open a pdf from a contact. all other pdf open fine

I receive an error code = 0x40010015 when trying to open a PDF in Photoshop CS3 for windows.
I do not have Illustrator to open and re-save as the forum discussion indicated.
Is there another way to open a PDF with this error code? I work with Quark, Photoshop and Publisher
MartyMag22

Getting error code 37 while sending IDOC via WE19

Hello experts,
I am facing a very unlikely error which is preventing me from testing my scenario.
I dont have XI quality server and hence I am using my development server as both dev and quality. Hence I need to connect both dev and quality SAP R/3 system to my XI dev system. While I have done all the configurations in my XI and both SAP R/3 systems, its giving me error when i am trying to send IDOC from quality system.
In quality R/3 i have done the following:
1) Created RFC for my XI dev server
2) Created port for this RFC
3) Created partner profile adding all required IDOCS in the outbound parameters
4) Created distribution channel for all the idocs
In XI dev system i have done the following:
1) Created RFC for both dev and quality of R/3
2) Created port for both the RFCs
3) Maintained the IDOC metadata for both the ports
Now when I am pusing IDOC via dev of r/3 (we19) is working fine but when I am doing the same from quality of r/3 its giving me status code of idoc as 37 that says "An error was identified in the control record while adding an IDoc. The sender port SAPQTY_510 is invalid."
But I have created this sender port SAPQTY_510 in my XI dev system and have also maintained the idoc metadata. I dont know why this error is coming.
Can anyone please point out what mistake i have done or if i missed sometig as I am trying to connect 2 r/3 systems to one XI system.
Its really urgent hence your help will be highly apreciated.
Thanks,
Yash

hi yash,
where you created SAPQTY_510 ,it should be created in R/3 Quality RFC destinations.
In XI DEV create port like SAPxxx WHERE xxx is SID of quality system.
actually we are getting confused.
i guess you used same name SAPQTY_510 in quality R/3 and XI DEV .
In error it says sender port SAPQTY_510 is invalid mean port of Source not XI DEV(receiver).
just try to use some other name say SAPXXX_QUA and confirm the error.
when IDOC is sent to XI DEV ,port of XIDEV SAPQTY_510 has nothing to play any role .
just check whether rfc destination of sender port (QUALITY R/3)you used is of type 3.
so please check at which port error is coming.
Thanks & Regards,
Rama Krishna
Edited by: rama krishna talluri on Mar 5, 2008 10:02 AM

E6-00 Get "Error Code: 300" while installing Java ...

Dear All, I've a brand new Nokia E6-00 phone which I take care a lot!
I'm trying to install a Java application through Nokia Suite 3.3.89 version, and get "There was a problem with installing the file. Error code 300"
I saw a couple of topics similar to this one, but for different Nokia models.
I do not want to perform a hard reset, so any other ideas?
Thanks a lot in advance!

Hi ps80
Thank you for posting and welcome to Nokia forum!
Downloading and installation of application from a 3rd party website has no guarantee that it will be compatible with your phone, this might damage your phone. If you want you can check Nokia Store for alternative application similar to what you're trying to download from a 3rd party.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Getting error code 300 while trying to install an ...

Please help me resolve the error while trying to install an app in nokia asha 311 mobile. The error code is 300.
Please advise.
Regards,
KPS

Are you browsing via the Nokia Store or via the Nokia Xpress browser?
Even if several apps are affected, please, provide one concrete example app, to reproduce this here.

Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.

You're very welcome.

I'm getting "Error code 48" while installing CC on window 8

Hello sir please help me

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/

TS1424 I get error code R6034. Any suggestions?

I get error code R6034 while trying to download Itunes. Any suggestions?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99985)

Getting Error code -2130771961 while Discovering Cross platform server from SCOM 2012 r2.

Similar Messages

Maybe you are looking for