Getting error code 3195 when upgrade my Ios.
Dear All.
I am getting error code 1395 when ever i am trying to upgrade my iPhone4 version 4.3.5 to iOS 5. I am useing Itune latest version 10.5.
Kindly help me out.
Do you get this error in Windows? If yes, according to this article,, http://www.sydown.net/fix-error-1395-patch-for-error-1395 , you'll have to update your Windows software.
Similar Messages
-
Error Code (9) when upgrading to iOS 6
Last night I downloaded the iOS 6 software to my iPhone 4 (without connecting to iTunes). This morning it had apparently restarted, showing the 'connect to iTunes'-symbol on the display. Doing that, iTunes downloaded the software (again?) and came up with the message that an iPhone that needed to be restored was connected. I tried to restore, but now I get the message that the iPhone can not be restored, an unknown error occured (9). It is translated from the Danish error message, so it may not be completely correct.
Error code 9 is something with the USB connection, so I tried everything Apple support says about this without any result: http://support.apple.com/kb/TS3694?viewlocale=en_US&locale=en_US#error9 I tried on a different USB port, with several different cables, on a different Mac... All with the same result. iTunes keep saying that the iPhone needs to be restored and then prompts that this is not possible. So now the phone is 'bricked'.
There are no Apple Stores in Denmark, so I am stuck with my vendor (TDC) who just have the message that they can take it in for three weeks, but if it says it needs to connect to iTunes they will do nothing about it beacause it is my own problem and I have to follow Apple's instructions...
Does anybody have a clur about what to do in this situation? The phone worked perfectly fine before and I even backed it up via USB earlier yesterday, meaning there are no hardware problems as such and no problems with the USB connection.
Thanks!
/JesperYup. would be nicew to hear from Adobe on this. Ovcer the past several months I hav e tried to install the 12.0.4 update and keep getting the same error code others are getting.Wha
zzup Adobe?> -
I am getting error code 3194 when i try to update my iphone 4S to IOS 6.1.3. How can i resolve this?
Here you go: http://lmgtfy.com/?q=iphone+error+3194
-
I keep getting error code 54 when synching iphone 5, how do i fix?
i keep getting error code 54 when synching iphone 5, how do i fix?
Hi papabear74,
Try using the steps in the following article to help you troubleshoot this issue:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
TS3694 Why am I getting error code 3194 when i try to restore my ipod?
Why am I getting error code 3194 when I try to restore my ipod touch 4th generation
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
http://support.apple.com/kb/TS3694#error3194
Also see:
iPhone Error 3194 - How to Fix iTunes Error 3194? -
I keep getting error code u44m1p34 when I try to update CC2014. I've tried uninstalling several times completely to no avail. Any ideas? It's really bugging me now!
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Error code 1667 when upgrading to iOS7
i had error code 1667 when upgrading my iphone and ipad to iOS7 and found that i did not have sufficient memory. I freed up space on both devices and iOS7 immediately installed
Yup. would be nicew to hear from Adobe on this. Ovcer the past several months I hav e tried to install the 12.0.4 update and keep getting the same error code others are getting.Wha
zzup Adobe?> -
i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.
-
i'm getting error code 1202 when i try to log on to the itunes store using windows vista
http://support.apple.com/kb/TS1368
-
I keep getting error code 0x80070643 when I try to install Sql Server 2008 R2 Service Pack 1 (KB2528583)
Operating System is Windows 2008 R2 64 bitHi JamesRead,
According to your description, when you install SQL Server 2008 R2 service pack 1, we need to verify if
you must have administrative rights on the computer.
There are multiple files available for the download, you will be prompted to select the files you need. We need to verify if you run the SQLServer2008R2SP1-KB2528583-x64-ENU.exe. Or you can install SQL server updates from the command
prompt and check if it can install successfully.
You can prepare an installation of database engine instance to include product update:
setup.exe /q /IAcceptSQLServerLicenseTerms /ACTION=PrepareImage /UpdateEnabled=True /UpdateEnabled=True /UpdateSource=<path where the update is downloaded> /INSTANCEID=<Instance ID> /FEATURES=SQLEngine
For more information, you can review the following article about installing Updates from the Command Prompt.
http://technet.microsoft.com/en-us/library/dd638066.aspx
Thanks,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Since installing the latest update my mother-in-law gets Error Code VM502 when sending to only 6 recipients. This didn't happen before the update.
The error came from your providers server. You need to ask them why they are setting limits.
Thunderbird does not have any limits. -
Why am I getting error code 1402 when trying to update adobe reader 10?
Why am I getting error code 1402 when trying to update adobe reader 10?
Impossible to guess the "why" with so little information, but this may be helpful if you want to solve the problem: Error 1402 | Error 1406 | Acrobat, Reader
-
Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article. -
I get "error code -8058" when attempting to copy and paste in Finder, I get error code -8058 when attempting to copy and paste in Finder. "Alt +Drag" works. Any ideas?
Have a look at the 'More Like This' to the right - seem to be some solutions offered: >>>>>>>>>>>>>>>>>
-
Getting error code A12E1 when trying to install CC update -- help! (Mac OS 10.7.5) I have disabled my security software, but that doesn't help. Any ideas?
http://helpx.adobe.com/creative-cloud/kb/a12e1-error-downloading-creative-cloud.html
Maybe you are looking for
-
I want to find any backup and recovery solution for SharePoint server 2013 enterprise
Dear Expertise, Recent set up SharePoint server 2013 Enterprise, and looking for backup and recovery solution, does the built in Windows Backup can handle it, and how? KF
-
This should be simple, but it's not responding. I've checked it dozens of times. I have the CSS and HTML in the same folder. I go to the index.html tab and go to "link CSS." I navigate to the css file but what shows up in the "File/URL" window is
-
have 4gb of memory being used on my phone and dont know what it is??
-
Missing authorizations in QAS for each n every t code
Hello All, i have created one role in QAS adding tcodes to it when i tested it it is showing missing authorizations for every tcode when i see in su53 and i tried to assign manually in su24 also but it is saying no changes are permitte
-
Patch driver 6678700 taking forever
I'm using MW to upgrade a test instance of 11.5.10.2 to R12.1.1. I've manually applied patch 7461070 (The AD 12.1.1 upgrade driver) since MW won't apply it. I'm applying the American English upgrade patch driver (patch 6678700) manually. It has been