Getting error : could not acquire the execute lock for workflow

This kind of an issue normally occur when you are trying to run a workflow that is currently running or in a suspeneded state. we observe this issues when we are having multiple integration services. the workflow might be running in another integration service or in a debugger session. simple solution is check if it is running or in a suspended state by debugger or in another service. if yes stop it and restart the workflow ThanksHijesh

Hi All, I made changes in source from oracle datatype to flat datatype then i changed again to oracle datatype.after that i tried to execute the task,i couldnt execute,below error shown. Error : could not acquire the execute lock for workflow.please check the Integartion log for more information. Note: other sessions also get changed. how do i execute this workflow with out any changes in session. please let me know. Thanks,Kate.

Similar Messages

Getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

getting error could not place the document because there is not enough memory RAM wile importing .png file into Photoshop cc

Without knowing anything about your system, your image file, your working document and so on nobody can even begin to guess. The file could be damaged, there could be color management issues at play and what have you...
Mylenium

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Luxadm probe / Could not find the loop address for the device at physical path

Using EMC FibreChannel Disks on a Solaris 10
# luxadm probe
No Network Array enclosures found in /dev/es
Error: Could not find the loop address for the device at physical path.
# echo $?
255
Any ideas how to fix?
Thank,
Marcel

Hi Marcel,
Which Solaris 10 release is this?
I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
its mostly seen on Solaris 8 and 9.
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display.
This process runs in the background so the user is not aware that another luxadm display process is running.
Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
Let me know if the workaround helps or so I can follow-up with the right support team.
Thanks, Cindy

Could not find the artifact type for property kind

Team Foundation Server 2013 Update4 on Win Server 2008 R2, this message has suddenly started appearing.
Team foundation error: Could not find the artifact type for property kind '77951f77-f29d-4a9b-8311-1b13e4b89c42'. The property kind was not properly defined.
Last update installed was Update 4 on 17 Dec 2014, and at the time of install, everything was working well. I've re-applied update 4 in the hope it would resolve it, but the same error appears when I open the TFS console. Please help!
Programming today is a race between software engineers striving to build bigger and better idiot- proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.

Hi Stunt,
Thanks for your post.
And thank you for sharing your experience here. It will be very beneficial for other community members having the similar questions.
All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I get " itunes could not backup the iphone because an error occured

I get " itunes could not backup the iphone because an error occured

Hello there, pasqualefromdanville.
When receiving the messages that iTunes could not backup the iPhone because an error occurred, the Knowledge Base article offers up some great, in-depth troubleshooting for resolving the issue:
iOS: If you can't back up or restore from a backup in iTunes - Apple Support
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT3204 new ipod touch. can access iTunes store. cannot create iTunes ID. get error "could not complete iTunes request. unknown error occured (-1202)".Ipod updated to latest issue,firewall exception allowed.SSL 3.0 & TSL 1.0 ok. Running windows Vista. Help

New ipod touch 32gb. Can access iTune store.Can sample music selection. Completed latest update for ipod Can't make any purchases. Get error "could not complete your iTunes store request. An unknown error occured (-1202)". security SSL 3.0 & TSL 1.0 OK. Firewall enabled for iTunes. ???

laneymenion wrote:
Using Proxy: Yes
HTTP Proxy: 192.168.100.15:80
Change the Using Proxy to No
Have you allowed itunes and itunes helper in your security software firewall?

Can not start WebLogic in Eclipse. Error: "Could not find the main class."

I have installed Eclipse 2.0 and WebLogic Server 6.1. and the WebLogc plug in from GENUITEC (and jdk1.3.1_04, on Win2K Server). After I have done the configuration, the WebLogic start/stop buttons are integried into the Eclipse Toolbar, but when I click on the start button to start Weblogic, it pops up a dialog box "Java Virtual Machine Launcher" with message: "Could not find the main class. Program will exit!"
Starting WebLogc Server from the Start panel works fine.
Does any one have seen this before or have a suggestion what I should do?
Many many thanks in advance.
Huan

Weblogic must be started with a full JDK; otherwise
JSPs and dynamic EJB stubs could not be deployed. The
error message
indicates you are attempting to use a JRE. Configure
Eclipse JRE to point to a JDK. The product
documentation will help you with this process. It does not work for me. :-(
I have tried JDK 1.3.1 and 1.4.1: same result: I get a "Could not find the main class: Program will exit"
For free expert support please consider contacting
Genuitec at [email protected] If just want any
answer ask a newsgroup.
WayneI'll try the support at '[email protected]' :)
Michel
Michel Szybist
[email protected]
Fax: +33 (0)173729897
SMS: http://www.szybist.net/

Photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point

photoshop cs6 error "could not use the type tool because the target channel is hidden. happens when im typing in photoshop, go to another layer and then come back. can't alter text at that point. i really need to get thsi figured out. thank you.

You may have answered my question. I AM using the 64bit version of Illustrator CS6. I had no idea there were bugs in it that affected paths copied and pasted from Illustrator to Photoshop.
A bit more about what I'm trying to accomplish... I'm trying to follow Deke's tutorial (http://www.deke.com/content/dekes-techniques-018-creating-a-3d-pie-chart) which is already difficult since so much has changed between CS5.5 and 6, but then on top of that, I keep getting errors!
So I created the pie chart exactly as he shows and copied and pasted into Photoshop exactly as he does. Before submitting this post, though, I tried drawing just two very simple triangle shapes, copying them both and pasting them into Photoshop as a shape layer. The shapes weren't overlapping, but they were a part of the same shape layer just like the pie chart tutorial.
Thanks for your help. If there is anything else I should try before just giving up because of the 64bit bugs, please let me know.

After Saving File get Message "Could not find the included template"

I have a strange issue going on and it's becoming very, very annoying. When I edit a file on our web server (it's a virtual machine running Windows Server 2008) and then try to view it in my browser, I get the error message "Could not find the included template". If I refresh the page (sometimes upwards of 40 times) my page with whatever changes I made will finally load. I checked with our system administrator and he's not aware of what could be causing this.
It happens on whatever the most recent file I was working on. If it's a ColdFusion file, I get the "Could not find the included template" error. If it's a change to my stylesheet, the styles will not load. Again, in both instances it takes hitting F5 upwards of 40 times until the page displays correctly.
Has anybody else ever encountered such an issue? It's happening on two separate virtual servers (both Win 2008), one has CF9 installed and the other CF10. It get's frustrating having to referesh before the page or stylesheet get picked up. Any help or suggestions are appreciated!
Thanks.
Brian

azuro28 wrote:
> I'm new to ColdFusion and after I edit a cfm
(template.cfm) file using vim, I
> got the following error:
> Could not find the included template template.cfm
>
> page.cfm contains:
> <cfinclude template="template.cfm">
>
That means that the file 'template.cfm' is not where
ColdFusion needs it
to be so that it can include it. Which is generally in the
same folder
at page.cfm with that syntax.

Error - Could not complete the music store request, the store may be busy .

I get the error "Could not complete the music store request, the store may be busy, check your internet connection or try again later." I have uninstalled and reinstalled,Tried on and off with the firewall, tossed the prefs, tried older and latest versions. It used to work but it hasn't worked in the last few days.
Windows XP Pro

I found the problem to the iTunes Music Store connectivity. When iTunes version 6 is installed, it places a configuration / preferences file in the following location:
"C:\Documents and Settings\<user>\Application Data\Apple Computer\iTunes\iTunes.pref"
This file contains several very large keys:
Preferences:129= (41,826 characters in length)
Music Store= (1,722 Characters in length)
Somewhere in these keys is stored are references to userid's, connections or other TCP/IP / internet connectivity objects that are being used when iTunes is installed. By deleting this file, these old setting appear to be cleared out.
In my case, one or more of the keys in this file appear to have been storing a property from my old dial-up ISP connection that was no longer valid for my new, Comcast cable modem connection.
Once I deleted this file, and re-started iTunes, it was as if I had never run the software before. I bypassed the option for searching for and importing .mp4's from My Music, and Itunes opened correctly, with full access to the music store. My library and playlists were intact and all is well.
Apple should re-write the protion of iTunes codes that stores anything pertaning to an internet connection that may change over time. Alternatively, iTunes should either A) Prompt for this information B) Enable user access to this parameter in a settings dialog C) Access this information dynamically at runtime.
Paul

Error: Could not find the file "flash.ocx"

I have been receiving the error COULD NOT FIND THE FILE
"FLASH.OCX" for the past couple of months - I have been watching
the message boards and have seen a lot of "fixes" and beta's come
up errors (not sure that it's this exact error though).
I get this error continuously throughout the day - no matter
if I have nothing running on my computer or I have 10 things open.
This morning it occurred to me that my screen saver is not coming
on and it seems to me that the above errror is popping up everytime
my screen saver should start. I HAVE TIMED THIS TODAY AND CHANGED
HOW LONG BEFORE MY SCREEN SAVER STARTS - AND IT IS DEFINITELY
GETTING THE ERROR EVERYTIME THE SCREEN SAVER IS TRYING TO START.
Last week, I deleted the version of Flash that I had and then
re-installed; still getting the error.
I was getting the error when I had IE6 so I thought maybe
switching to IE7 would correct it - but it didn't (that was a few
weeks ago).
My computer does not freeze up but it is SOOO annoying to
continually throughout the day get this error.
IE7.0
ADOBE 9,0,28,0
WINDOWS XP - SP2
PLEASE HELP!

Ah-ah! The workaround is to map my network folder to a drive, say... M:\
So, when I select Edit->Edit in Audition->Sequence, I can select the Browse button to alter the Path destination. Instead of seeing '\\Zeus\Projects\...', I select the mapped M: drive so the path reads 'M:\Projects\...' instead.
Then, Audition loads and is able to find the sequence or clip.
So... that solves my problem!

Osdm error 'could not create the Java virtual machine.'

Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
could not create the Java virtual machine.
I'm don't know where to begin to troubleshoot this problem.
Is there a log,trace,error file somewhere?
Do I need something specific in my path or an environment variable set?

Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
Feedback
Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
The Team
I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
Now to the problem. - Java virtual machine
1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
If you do not have a JDK, then you can download and install that as described on the download page.
Troubleshooting
We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
Regards
Sue

Activation Error: Could not complete the iTunes... (help!)

Activation Error: "Could not complete the iTunes Store request. The store may be busy. Check your Internet connection or try again later"
Ok that is the error I get every time I set my new iPhone in the dock.
Details:
I bought the 8GB iPhone at the Kenwood Mall in Cincinnati OH, brought it home installed version 7.3 of iTunes, plugged in the dock and the iPhone, I went through the activation process and after agreeing to all the terms and licenses, the iPhone said "activated," but iTunes was still trying to connect to AT&T for something and eventually timed out. I remove the iPhone and it seems to sync and all features seem to work fine including making and receiving calls. BUT... everytime I place the iPhone in the dock, I get the above error. I click OK and every works fine. This happens everytime I place the iPhone in dock. How do I get rid of it??? Is there still something else that needs to be done on my account. BTW, my Internet is working fine, as I am typing this message via my Internet connection in IE on apple's site.
Thanks
Dell XPS Gen-2 Windows XP Pro 1GB Mem, SP2

I bought the 8GB model, only had a 45 minute wait in line at ATT store. Performed activation via iTunes over 10 hours ago with porting of old T-mobile number. Still receiving message that activation is not completed. Called ATT and after 3 transfers, 35 minute hold times and then a recorded message that "due to extremely high call volumes" we will not be able to answer your call" it then proceeds to disconnect you. Finally kept trying and talked with ATT rep. in portability and they confirmed my porting has been approved but that my account still shows iPhone not registered. They then provided 877-800-3701 for problems with iPhone activation. After speaking with this representative, he would not work with me until I provided Web Order #. I told him that I purchased the phone in person at store, so he said that I would need to contact the store to obtain this number and without this number they could not verify that I had the phone and therefore it couldn't be activated. I called the store and left message. A store rep. called me back and told me that I would need to contact that same 877 number as they could not support me. ***!! To make matters worse, my old phone is now been ported and deactivated so I am phone-less and have a iPhone sitting in the dock that is completely useless. I am very disgusted at this point and don't know what to do. I was not expecting such an awful customer experience with an Apple product. Anyone have any thoughts? I drove by the AT&T store and there is a huge line of buyers, so I am not sure what to do at this point.

Error could not synchronise the colour settings because of a program error

Keep getting this error could not synchronise the colour settings because of a program error
and it crashes when trying to print

Color Settings are synced through Bridge. Try re-syncing the Color Settings in Bridge (See: Creative Suite * Keeping colors consistent)
If that doesn't work, try resetting Photoshop's preference settings: Photoshop Help | Preferences

Getting error : could not acquire the execute lock for workflow

Similar Messages

Maybe you are looking for