Getting error during redirecting/encoding

I get this error when tring to to burn a disk in iDVD. I don't know what I am doing wrong

Hi
You must supply much more info to set us of in right direction.
Can You Please - Write out the Exact Error message
(If You just done this - Sorry - never seen it before - hoped on a clue here)
• iDVD version
• Where does Your movie originate from: iMovie version x.x.x or from FinalCut or from iTunes
• In what Video-Codec is movie
• What happens if You try to "Save as a DiskImage" ?
• Free Space on Start.Up (Macintosh HD) Hard Disk - How Much ?
• Brand of DVD used ( Verbatim - only I use )
• Type of DVD used ( e.g. SL-DVD-R or DL-DVD+RW or ? )
• Photos used - in what file format (yes in movie too)
• Audio used -in what file format (yes in movie too)
As You see - there are myriads of things that matters and - I have no clairvoyant skill at all
Yours Bengt W

Similar Messages

I repeatedly get "error during rendering/encoding of menus/slideshow" message. This process is the same on my iMac, MacBook and another iMac. I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

I keep getting "error during rendering/encoding of menus/slideshows" message. I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old. Obviously I'm using iDVD. I purchased an iMac about a year ago and moved to use this for dvd burning without problem. A few months ago (approximately) I started to experience problems with burning with the error message above. I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD. Still the same message came up. I lost count of how many times I repeated the process with different clips and variations and the same thing happened. This was also the case with my MacBook and my husband's iMac.
After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened. They told me it must be the process that I am using that is incorrect!
I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had. The same message came up so they tried using my clips in one of their mac's. The same message. They tried it with different clips and the same message. The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page.
I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work! It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion. I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy. It was mentioned that an up-date may have caused the problem on all my macs.
I feel that this issue should be addressed by Apple as a matter of correctness.
I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems. Please Apple, keep/regain your good name and sort this out.
Jayne Connelly

Thanks Bengt W for your attention to this matter. So much appreciated. And thanks for putting me right on the aim of forums (new to this). Although, you may regret asking for more information. I've added everything I can below.
The process I used is as follows:
Import recorded clips of between 5 and 15minutes each from my video recorder into i
Edit the clips (remove unwanted start and endng)
Add title to front of clips
‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
Open iDVD and ‘create new project’
Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
Add 2 submenus for each group of clips
Select submenu - drag and drop between 3 – 6 clips in each of the twosubmenus
Change title colours on clips
Dragand drop image into drop zones where required
In‘map’ view I check for any yellow warnings before burning to disc
In an attempt to remedy the problems I’ve tried the following:
Try new DVD discs
Try different themes (favourites and standardones)
Change images in drop zones
Start whole process again even from importingfrom camera again
Two other completely different computers (iMacand MacBook) with iDVD
Go to apple shop and use their computers to doin iDVD
Try with one clip and no menu pages added
Use a clip that I already have that did notoriginate from my camera
Turn computer off and restart
New hard drive
New optical lense (thing)
New DVD burner
Saving to disc image rather than dvd disc
Other points:
I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across. I used a theme that I've used before which has failed and added one sub menu page where the clip went. It burned to disc image successfully.
The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this. That could have been an issue before (I didn’t check it) butnot now.
Other technical stuff that I don't understand but you may:
I have…… Mac OS X Version 10.6.7 with all updates onit. Processor 2.8 GHz Intel Corei7. Memory 4GB 1067 MHz DDR3.
iDVD version 7.1.1
HardwareOverview:
Model Name: iMac
Model Identifier: iMac11,1
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 4GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM111.0034.B02
SMC Version (system):            1.54f36
OPTIARCDVD RW AD-5680H:
Firmware Revision:     3AHB
Interconnect:    ATAPI
Burn Support:   Yes (AppleShipping Drive)
Cache:    2048KB
Reads DVD:    Yes
CD-Write: -R, -RW
DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
Write Strategies: CD-TAO,CD-SAO, CD-Raw, DVD-DAO
Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement).
Eagerly awaiting your reply.
Jayne

Trying to burn my project to a DVD using iDVD, but keep getting "Error during rendering/encoding of the menus/slideshows. The burning process has been canceled." How do I fix this?

Just mad a movie and trying to burn it to a DVD but keep getting an error message. It reads:
"Error during rendering/encoding. There was an erro during rendering/encoding of the menus/slideshows. The burning process has been canceled."

Enable Show TV Safe Bengt Wärleby lists items to consider about encoding issues in this topic: Multiplexing Error: Apple Support Communities
OT

Can't Burn DVD - keep getting "Error during rendering/encoding"...Help!

I have a new IMac computer with Leopard and I'm having problems burning DVDs. I created a project using IDVD and have audio and pictures (imported individually from Iphoto) that I created into slideshows. I'm try to burn my final copy and continue to receive the "Error during rendering/encoding" message. I looked at earlier threads and saw some people had success when saving it first to a disk image however when I attempted to do that I received the same error. I know I have plenty of memory space since this project is very small. Please let me know if you have any ideas!!
Thanks!

Hi,
I have a new mac with Leopard since a week, and I had the same problem ("error during rendering / encoding..."). This happened when burning to a disk image.
I tried a lot of things :
* very small project
* create a new user
* put pictures in a folder, and not drag them from iphoto
* change the theme
I still had the same problem.
The last thing I tried was to put all the files used by idvd on the hard disk (instead of of an external firewire disk).
It worked ! (with the small size project).
I'm trying to burn the large project again...
I will tell you if it succeeds...
Best regards,
Nicolas

I've tried everything-I still get error during rendering/encoding using iDVD

I have a iMac Intel core duo (2005) with OSX10.4.11 and iDVD vers.7.04, 2 gigs of RAM and 56Gigs of free HD space. I can't burn a 3 slide slideshow to DVD without getting rendering/encoding error. I can't save a Disk Image file nor a Video TS folder. I have tried deleting the iDVDplaylist to trash. I have repaired permissions from install DVD. I have also logged on as new user with same results. I've tried using different themes and I have also tried from scratch using Magic iDVD. The built-in dvd burner works fine with regular files so I am confidant it works OK. This is the first time I have used iDVD and all slides are from the media pane and there are no errors in map view. Can anybody help!!!!

Hi
Did You in iDVD - Turn on TV-Safe area ?
Anything goes beyound this - OR EVEN Touching IT ! ? - It must not.
Titles and Chapter names (on menus) - Only A to Z and 0 to 9 - NO OTHER letters as : - ; . etc.
Yours Bengt W

HT1103 i am getting a error during rendering/encoding message

I am trying to burn a DVD from and I am getting a error during rendering/encoding message

There are 9 versions of iPhoto. Which version of iPhoto and any other application involved (iDVD?) are you using and what system are you running? Also describe exactly what you're doing. You orignal statement is way to general for us to attempt to offer any help.
OT

Error during rendering/encoding -- PLEASE HELP!!

Hey everybody!! After trying twice to burn this project to DVD, I'm about ready to rip my hair out!! First of all, here's the specifics about my computer:
Mac OS 10.3.7 / 800 MHZ Power PC G4 / 256 MB SDRam / My programs are iMovie 4 and I have iDVD5
OK, I'm trying to burn a movie that is about 1 hour, 23 minutes long. Even though my movie is not 90 minutes long, iDVD does tell me that it is too long and that I need to click on "Best Performance" in my iDVD Preferences. No problem, I did that. (By the way, at the time of the burning, I have about 5.1 GB on space left on my hard drive.)
Before burning I do repair permissions and delete my "com.apple.idvd.plist".
So, it burns and burns for roughly 6 hours. Right at the very end, the disk spits out and an error message comes up saying:
Encoding Video
Error during rendering/encoding:
This is very frustrating because I need to get this video done by tonight and turn it in by Monday morning!!
Any suggestions?? Please help!!! Thanxx!!

I have about 5.1 GB on space left on my hard drive
I don't think that's enough. Remember a DVD is 4.7GB (which iDVD first stores on your hard drive) plus temporary files that iDVD needs.

Error message: Error During Rendering / Encoding

Greetings,
I have used iDVD in the past without problems on my macbook pro. Now it seems there is no way to make it work! I get this error everytime: "Error During Rendering/Encoding" the error is in the menu/slideshows, but I see that it never gets past the menu item on the list of things it is working on. I have tried going to the older menus and no luck. It says that the burning process has been cancelled. Any ideas?????
Thanks!

Hooray! I got it... I used what you said and this other post (below) helped as well. Is there a way to remove the apple logo from the menu page?
Here is the other post that helped as well:
I was having the same problem yesterday and researched all the solutions in the Forum. I wasn't experiencing the problem with burning to a disc, because I was trying to burn a disc image, so the variable of "better" versus "best" disc wasn't a factor. I did three simple things that I read about, after I tried four times and received the "Multiplexor Error" thing. One, I deleted encoded assets (Advanced > Delete Encoded Assets). Two, I trashed the iDVD preference file (home > library > preferences > com.apple.iDVD.plist), but only after I closed the iDVD application. Three, and maybe this stupid little glitchy thing made a difference, I deleted from the title and scene headings all characters other than letters of the alphabet and numbers. I have a few "&"'s and "/"s in there and maybe a few other little lazy short-cut things. Sort of a Microsoft thing, but maybe that was the trick. So, this morning the Disc Image was created, I've burned several DVD's (Magnavox DVD-R), they work on my Sony Blu-Ray player and all is happyland today.

Error during movie encoding - tried all the common things, any suggestions?

HI, Attempting to burn a DVD from iDVD 7.11
I'm getting the "Encoding Error: There was an error during movie encoding" dialogue at the end of an attempted burn. Tried several times and many of the suggestions already on the forum
I have "shared" the movie from iMovie. When it first opens iDVD I have to change the default setting of "best Performance" to "Professional Quality" and the video mode to PAL (I'm in Australia). I change it both in the preferences pane (a change which seems to be ignored when I restart the program) and in the project info.
- I'm trying just to make a disc image, but haven't got past this first step to getting it to DVD...
- There is only the movie in my project (I've not added audio or pics in iDVD)
- I've used the "Modern" theme and deleted the default drop zones and menu audio,
- I've checked the chapter markers are not at the start of the movie or near any transitions,
- There are no special characters in the titles,
- All titles and menus are within the TV safe zone,
- I've deleted the com.apple.iMovie.plst files and emptied trash,
- I've tried deleting encoded assets,
- Repaired permissions, restarted the computer, checked for updated software,
- (tried a "safe boot" as someone suggested somewhere, but the program couldn't find the movie or audio files),
- I have 660GB free on the main hard drive,
- I've disconnected external drives,
- no error appear in map view,
- I preview the project and all appears fine,
The original footage was filmed for me. I was given a DVD which I ripped into an MP4, import into iMovie, edited the audio, added AIFF audio, added a jpeg image and 2 transitions. (Unfortunately the audio on the original I was given is unusable, else I could just copy the DVD I was given.)
So if anyone has further suggestions as to what might resolve this issue, please let me know!

Thanks for your post F, much appreciated
The project is 123 minutes, 4.16GB and it's being broadcast on TV, so I need max quality I can get (without spending money!)
I think I have sort of solved the problem - addressing what you've identified in a slightly different way.
Since my previous post, I noticed that clicking on the "Media" tab in the side pane, and selecting "Movies", my project was listed, but when I clicked on it, rather than the thumbnail I get on other movies I've processed, I got this text:
"This iMovie project can't be used because it hasn't been prepared for sharing yet. To prepare it for sharing, open it in iMovie and choose Share > Media Browser.... "
I did that (7 hours processing) then successfully created the disc image (2 hours processing). I have now burnt the DVD using disc utility (1 hour processing). It plays OK on the computer, but I'll need to check it on a normal player before marking this as thread solved (I don't have one here at home).
Unfortunately somewhere in all this processing the video has significantly lost quality. I thought I'd used all the highest quality setting, but will have to go back and check each step again. Unless someone reading this post has noticed anything I've done so far that would compromise video quality. The audio is fine - which for this project is the most important aspect.
So in regard to my initial problem; it seems there is a problem in iDVD not recognising/remembering the set preferences when using the "Share > iDVD " function in iMovie.
To summarise my solution for anyone else who experiences the same issue,
When sending a project from iMovie using "Share > iDVD " it seems you must also choose "Share > Media Browser.... "
This may be specific only to the case where PAL is required.
PS
I should also note, incase it made any difference, that I found the default headings in the chapter menus had dashes in them (i.e. it defaults to "Scenes 1 - 6", so I changed to "Scenes 1 to 6"). The only other modification I made since my original post was using stills instead of moving thumbnails for the chapter selection.

"Error during movie encoding" help pls?

Hi,
sorry if this is a repost but i have looked through all the other threads taken on board all the advice and still coming to the same result. im hoping there is someone who can help? its driving me a bit mad tbh
this is where im at:
- have 63gb of free disc space
- have repaired disc permissions
- no errors on map image page
- all files work in quicktime and itunes
- all MP4 (h.264, mp3 audio, 16:9) coversion done in mpeg streamclip
- does not exceed the space allowance in 'project info'
- have tried moving the iDVD pref file to the desktop (with app closed)
- Tried 'deleting encoded assets'
- cleaned dvds.
- iDVD version 7.0.4
- disabled chapter markers
- using verbatim DVD-R discs
- tried slower burn speeds (x4)
- tried burning a disk image as well as straight to disc
keep on getting the same issue "error during movie encoding"
can anybody help?
thanks in advance
c

You've tried all the things we usually suggest.
all MP4 (h.264, mp3 audio, 16:9) coversion done in mpeg streamclip
I suspect something is wrong with this conversion. What was the original video source?

Error message during burning: Error during rendering/encoding

Hello,
I am using iDVD 6.0.2 to create a DVD. I have pictures and videos. The videos are in .ASF format and they are played on Quicktime on my computer.
Anyway, when I go to burn the DVD, it goes through the slideshow fine. But then, once it starts videos, it stops and the following error message shows up:
Encoding Video
Error during rendering/encoding
I am using a Memorex DVD-R (8x, 4.7 GB, 120 min video) dvd. Is there any way possible I can fix this problem? I really need this DVD soon. Thank you so much.

Best Buy and Office Depot carry Verbatim by me. Use only DVD-R, not DVD+R.
My guess is that .ASF file...........
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

An "error during rendering/encoding" message

Hello, can someone help me? I'm trying to burn a dvd using idvd through imovie. I start to end the rendering of my menus and the message pops up:
Error during rendering/encoding
There was an error during rendering/encoding of the menus/slideshows. Burning process abored.
Can any one help with this issue? thanks
bryan

Bryan,
I just went through this problem, and this is the advice I got and that worked for me...
Joan Philgreen, "Error during rendering/encoding", 01:31am Aug 11, 2005 CDT
I hope your situation is as easy to fix as mine was.
-Joan

GRRR! "There was an error during movie encoding"

I can't seem to compile and burn a DVD to save my life with iDVD. I have a video that I created and exported using iMovie and two shorter ones created in Photoshop CS6 — all three are the same encoding: 1920 x 1080, H.264, AAC, Color profile: HD (1-1-1). The one exported with iMovie is a .mov file and the other two are .mp4 files — none of them with any sort of copyright/permissions protection on them.
iDVD previews them all just fine, but EVERY SINGLE TIME I go to try and burn a DVD it gives me the above error message, "Encoding Video: There was an error during movie encoding" which tells me absolutely nothing. This might not stress me out so much if it were just a personal project, but rather it's for a friend's wedding that I shot and iDVD's failure to do a basic thing like encode video is really ticking me off.
I tried to localize the issue by trying to burn just the .mov file and then just one of the .m4v files — and have found it chokes on m4v files. Why is this so??
If I'm doing something wrong, the error message should give me a little more feedback than just "oh there was an error."

Hi
We are only Users - trying to help other users - rarely Apple or program developer drop in for a look so I would send feedback here
• www.apple.com/feedback/idvd.html
BUT as Apple discarded the product in all - can not even be bought any more - any further development is most certainly never to be.
But what You feed iDVD matters and - You and so many more has the idea that .mov or .m4v etc are movie formats/codecs - they are not - only containers - so to figure out what You give iDVD You need to find what's in them. I do like this
• Open them in QuickTime Player
• here open Inspector [cmd+I]
• read - Video Format/Codec: nnnnnnn
What does it say and in what frame rate (fps) ?
iDVD can only do good (very good) DVDs when feed
25 or 29.97 fps
interlaced SD-Video
So by feeding it 1920x1080 24fps - to make a NTSC (29.97fps) DVD - result will be very BAD. Conversion is of need. I use following programs to do this
• Frame Rate - JES_Deinterlacer
• MPEG Streamclip
• QuickTime 7.6 + Pro-upgrade
Yours Bengt W

Getting error during posting A/P invoice and A/P credit memos

We are intermittently getting this error during A/P invoice.
       When i am doing the full cycle of Purchase like
        Purchase Order
        Goods Receipts PO
       A/P. Invoice.
     At the time of A/P. Invoice the date has been coppied from the Goods Receipt's PO, i am getting the error, this error not comes regularly, only for few transcations,
     Please guide to me.
         Error is
       " No matching records found 'G/L Accounts' (OACT) (ODBC-2028)
                              Message 131 - 183 "
          Patch level is 27 and version is 2005B

Hello Prasad,
Before add A/P invoice, are you changing the price to a lower price, either by changing amount in the 'price' column or by giving a higher discount at the header level ? As far as I know, in a non continuous stock system company with the 'Use Negative Amount for Reverse Transaction' setting not ticked.
Another solution could be as follows (just check in your SAP B1 installation) :
When the user chooses User Defined Chart of Accounts under Administration -> System Initialization -> Company details -> Basis Initialization tab , the default accounts remain in the "G/L Account Determination", "Define Tax", "Define Warehouse" windows under Administration -> Definitions -> Financials and Administration -> Definitions -> Inventory. User has to check and define all accounts.
My reference is SAP notes 771489.
Another related issue is whether you are using rounding when adding a marketing document. If yes, you must define rounding account in 'Administration' > 'System Initialization' ->'G/L Account Determination' -> 'General' tab page under "Rounding Account" field.
Rgds,

Getting error during deleting a page in 4.1

I am getting the following error while deleting a page. I don't have any DA in the page.
ORA-04091: table APEX_040100.WWV_FLOW_PAGE_DA_EVENTS is mutating, trigger/function may not see it ORA-06512: at "APEX_040100.WWV_FLOW_PAGE_DA_ACTIONS_T1", line 35 ORA-04088: error during execution of trigger 'APEX_040100.WWV_FLOW_PAGE_DA_ACTIONS_T1'

Hi pkpanda,
This has come up a few times now, mostly seems to happen where the page is originally created as a copy of an existing page, that contains a DA, or where a DA references a region. Is there any chance you could send me an export of the application, to the address in my profile? It would really help to see exactly what's going on.
Regards,
Anthony

Getting error during redirecting/encoding

Similar Messages

Maybe you are looking for